9 workstation crashes ugly on ASUS P8Z77 - V Pro based machine, Linux host

Similar Questions

• Windsurf SanDisk 64 GB & amp; ASUS F1A75 - m Pro compatibility

  Hi all!

  My Sandisk Extreme 64 Gb when plugged into the USB chipset-controlled ports don't work!

  they work like USB2.0.

  This is my hardware configuration:

  ASUS F1A75-M Pro

  AMD A8 - 3870K

  Crucial 64 GB M4

  2 x Corsair Vengeance 8 GB DDR3 CMZ8GX3M2A1866C9

  Silverstone TJ08-ESilverstone box

  USB 3.0 EC01-P expansion card http://http :// www.silverstonetek.com/product.php?pid=327&area=enhttp :// www.silverstonetek.com/produc...

  Readers of Silverstone FP37 cards + USB 3.0 port http://http :// www.silverstonetek.com/product.php?pid=315

  Version of the BIOS 2206 (latest version)

  Please, note: each time the installation was not successful, I reinstalled everything again, I do this:

  -Disconnect the expansion cards

  -Unplug all usb 2.0 ports device & 3.0

  -configuration of the bios, I tried different configurations: controller ASmedia enabled or disabled, this bequest in favor USB2.0 & 3.0 enabled or disabled.

  -format

  -install windows

  -install the chipset driver: AMD_Chipset_V512013 found on the motherboard support page, and after I tried this one 13-4_vista_win7_win8_32-64_sb the site of support of AMD.

  -but do not work...

  When I plug in the USB, windows says... "this device can perform faster if you connect it to a..." 3.0 port... »

  System Properties > hardware > Device Manager are ok I don't know what I can do...

  I apologize for my English thank injured you a lot

  There are incompatibilities in the USB3.0 standards. They aren't too firm / coherent as it should.  Maybe an update driver for one or several of your devices will help you.  Or maybe another reader is necessary.

• My Muse program crashes when I am trying to download on my FTP host.

  My Muse program crashes when I am trying to download on my FTP host. I get this message:

  

  In the long term you would be well served to check the size of the active associated files and manually download all that are greater than 10 or 20 MB by using a program FTP. If this isn't the case, you will meet this next time that there is a need for a complete re-re-export/upload to your site.

• VMware workstation, crashes when I try to create a new virtual machine

  Hello

  I never had this problem before, but I didn't create a new virtual machine in a very long time. Last time I created one was making Workstation 9 I think. Some time after the upgrade to Workstation 10 or 8.1 of Windows Update 1 it has started.

  In 10 Workstation running on Windows 8.1, I select the file > new Virtual Machine dialog coming upwards and in a few seconds crashes of VMware workstation and closes.

  So I checked the Windows event logs and find

  Warning "VMware Workstation to function properly, must be reinstalled after the upgrade to Windows."

  So, I upgraded from 10.0.2 to 10.0.3 and it uninstalled and reinstalled but I still get this warning.

  Followed by an error

  ***

  Journal name:	Application
  Source:	Application error
  Date:	15/08/2014 23:33:53
  Event ID:	1000

  Task category: (100)

  Level:	Error
  Keywords:	Classic
  User:	N/A
  Computer:	P7Win8MC

  Description:

  Name of the failing application: vmware.exe, version: 10.0.3.48389, time stamp: 0x539a4fb0

  Name of the failed module: MSVCR90.dll, version: 9.0.30729.8387, time stamp: 0x51ea24a5

  Exception code: 0xc0000005

  Offset: 0x0003bece

  ID of the process failed: 0 x 1788

  Start time of application vulnerabilities: 0x01cfb902de541c11

  The failing application path: C:\Program Files (x 86) \VMware\VMware Workstation\vmware.exe

  Path of the failing module: C:\WINDOWS\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.8387_none_5094ca96bcb6b2bb\MSVCR90.dll

  Report ID: 24d5effb-24f6-11e4-bedd-20cf30780548

  ***

  So I need help to track down what I am not sure what VMware paper to look to maybe see what is happening.

  Thank you

  Rainey

  Well, I found the problem.

  I looked in the UNK file and found a few ISO files wrongs tracks.

  I had mounted some ISO in the past and they have made the entry in this file of preferences such as "isoLocationMRUx".

  I'd change the leter this ISO file player so they could not be found as input, once I corrected the paths I can now create a new virtual machine.

  He is responsible for ion BONE the new virtual machine now.

• 10 workstation crashing

  Hi all

  I was wondering if someone might be able to provide some advice. I been using VMware for a while and have a pretty good number of VMs, today I noticed that the version 10 is available, so I decided to give it a try and update my computer 9. Once I installed it however he would charge the first home page, as well as the list of virtual machines, I have and I tried to do just about anything and VMware hangs. Every time. I tried to go to about and it crashes, create a new VM, falls down. Even loading of a virtual machine crashes.

  I tried to uninstall other VMware products, uninstall 10 Workstation, workstation repair and cleanup using CCleaner. I also tried to restart after the first installation.

  After reinstalling, it crashes before even loading the home page.

  Anyone have any suggestions at all? Maybe some log files that I might be able to study?

  I am running Windows 7 with 16 GB of RAM and a processor AMD FX-8150.

  Yes, it is indeed the same problem we unfortunately discovered too late.  It should be fixed in the next version, but I can't comment on when that might be.

  I have attached a test program that should be able to identify the program that we are in conflict with (just run it via a command prompt).  I'd be curious to know what he reports.

• Installation of Windows 7 Raid with motherboard ASUS P8z77-VPRO

  The States of user manual ASUS that I need a USB floppy drive to load drivers during the Windows 7 RAID install. Question, SD USB card reader will work just as well?  Is there another alternative?

  Thank you

  Joe

  Yes, Windows 7 does not have a floppy disk, you can use a USB key if necessary.

  In fact, most of the time you will be same not a driver separated initially.

  Windows 7 contains most of the drivers needed even for RAID.

• How to troubleshoot Workstation Crash (vmui) - Access Violation?

  As of recently I get the following error (Windows Workstation 11.1.0,) when you start the user interface.

  ---------------------------

  VMware Workstation error

  ---------------------------

  Fatal error VMware Workstation: (vmui)

  Exception 0xc0000005 (access violation) occurred.

  A log file is available in "C:\Users\mgill\AppData\Local\Temp\vmware-mgill\vmware-ui-3224.log".

  You can request support.

  To collect the data to submit to the VMware support, choose "Collect load data" in the Help menu.

  You can also run the script 'vm-support' in the folder my computer directly.

  We will respond on the basis of your entitlement to support.

  ---------------------------

  Ok

  ---------------------------

  Nothing obvious in the newspapers. I repaired the installation. Uninstalled and reinstalled. Updated PowerCLI (who is also installed) and nothing don't change.

  Ironically, I discovered that if I don't know the error and just continue to work, everything seems to work properly. By the time I hit ok on the same windows if the user interface disappeared.

  Any help to remove this error is greatly appreciated.vm

  Here is the part of the log:

  2015 05-26 T 13: 43:01.969 + 02:00 | vmui | I120: cui::ComponentMgrCDS:RefreshComponentListWithDefaults: CDS_UNKNOWN_PRODUCT_ERROR for player-linux product

  2015 05-26 T 13: 43:01.969 + 02:00 | vmui | I120: CD: CdsUtil_QueryMsiByProductCode: {A53A11EA-0095-493F-86FA-A15E8A86A405} does not know in the MSI database.

  2015 05-26 T 13: 43:01.969 + 02:00 | vmui | I120: CD: CdsUtil_QueryMsiByProductCode: {313C6E9F-180C-46C3-8CB1-A2AFB34DF643} does not know in the MSI database.

  2015 05-26 T 13: 43:01.970 + 02:00 | vmui | E105: Error CDS: CdsUtil_QueryMsiPropertyByProductCode: MsiViewFetch failed: 259.

  2015 05-26 T 13: 43:01.971 + 02:00 | vmui | E105: Error CDS: CdsUtil_QueryMsiPropertyByProductCode: MsiViewFetch failed: 259.

  2015 05-26 T 13: 43:01.971 + 02:00 | vmui | E105: Error CDS: CdsUtil_QueryMsiPropertyByProductCode: MsiViewFetch failed: 259.

  2015 05-26 T 13: 43:01.972 + 02:00 | vmui | E105: Error CDS: CdsUtil_QueryMsiPropertyByProductCode: MsiViewFetch failed: 259.

  2015 05-26 T 13: 43:01.973 + 02:00 | vmui | E105: Error CDS: CdsUtil_QueryMsiPropertyByProductCode: MsiViewFetch failed: 259.

  2015 05-26 T 13: 43:01.973 + 02:00 | vmui | E105: Error CDS: CdsUtil_QueryMsiPropertyByProductCode: MsiViewFetch failed: 259.

  2015 05-26 T 13: 43:01.974 + 02:00 | vmui | I120: cui::ComponentMgrCDS:RefreshComponentListWithDefaults: CDS_UNKNOWN_PRODUCT_ERROR for product ws-linux

  2015 05-26 T 13: 43:01.974 + 02:00 | vmui | I120: CD: CdsUtil_QueryMsiByProductCode: {A3FF5CB2-FB35-4658-8751-9EDE1D65B3AA} does not know in the MSI database.

  2015 05-26 T 13: 43:01.974 + 02:00 | vmui | W110: cui::ComponentMgrCDS:RefreshComponentListWithDefaults: empty database installation! The substitution of installation state of windows-ws

  2015 05-26 T 13: 43:01.979 + 02:00 | vmui | I120: REGIONAL windows-1252-> user NULL = 809 system settings = 409

  2015 05-26 T 13: 43:02.220 + 02:00 | vthread-6 | I120: VTHREAD initialize identifier of the thread 'vthread-6' 6, host 10700

  2015 05-26 T 13: 43:02.262 + 02:00 | vmui | I120: VMMgr::OpenVM (cfgPath = C:\Virtual Machines\mgil-mint\mgil-mint.vmx)

  2015 05-26 T 13: 43:02.272 + 02:00 | vmui | I120: CVMUIApp::OpenTabInt: open

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | I120: BasicHttpOnSent: xmlStrcmp

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110: Unhandled Win32 SEH Exception

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110: - Win32 exception caught, exceptionCode 0xc0000005 (access violation).

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110: ExceptionAddress 0x5caf42aa eflags 0 x 00010282

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110: rwFlags 0 badAddr 0

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110: eax ebx 0 0 x 1 ecx 0x35f1d8

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110: edx 0xa70048 esi 0x35f1d8 edi 0x35f158

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110: eip 0x5caf42aa esp 0x35f0c0 ebp 0x35f14c

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110: The following data was delivered to the exception:

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110 :--0

  2015 05-26 T 13: 43:02.273 + 02:00 | vmui | W110 :--0

  He just disappeared!

  I uninstalled Visual Studio 2015 Preview. (Including .NET 4.5.3 preview and preview 2015 C++ Runtime).

  After that the error disappeared.

• The Finder crashes repeatedly after a start-up of the machine of time :/

  Hello!

  I hope someone can fix and enlighten the connundrum on my mac.

  During workflow last Friday my Macbook Pro became very unresponsive. The FCC kept crashing, and the beach ball stops all processes including typing.

  I went into the recovery partition and checked and repaired discs. There was a problem of partion with HD, but who fixed green OK.

  Once started in normal but also safe mode, the problem persisted still so I got Time Machine machine in the recovery partition, spend a couple of hours back. It took a little more than two days (50 something) hours to accomplish.

  The unresponsivness and beach-ball problem seemed fixed, however the finder would crash on start and remains afterwards, crashed, with all tests afterwards.

  I first tried the terminal fix to (re) move the plist, alas, that did not help.

  I tried to run in safe mode, but still no luck.

  I had another look at the recovery to do first aid on the disks. All were very well outside the HD this time. The fault could not set in the recovery partition.

  I used the single_user_mode to fix the HD and it worked. I ran until the result reported no abnormalities.

  But once enter the normal mode the finder still kept crashing.

  I tried to erase and recover the OS via the internet and the OS recovery. None of them would not work. The internet recevry would crash/freeze and display a triangle with an exclamation mark with something like apple/support message 2020 slot. Operating system recovery took a little more than two days once again and this time the mac could start not at all normal (or safe) mode. I got was the Apple logo on the screen with a bar that has frozen once filling up (I left it 12 hours, just in case)

  I now rebooted the machine through the using time Machine recovery partition again (this time come back someday).

  Unfortunately, the fault of finder is still there. I can access some programs such as safari and texedit, but anything that uses or is based on a finder is a no-go.

  I don't really know where to go from here.

  The specifications of the machine:

  Model: MacBookPro9 2, MBP91.00D3.B0C of BootROM, 2 processors, Intel Core i7, 2.9 GHz, 8 GB, MSC 2.2f44

  It currently runs on Yosemitte. (I had to downgrade from El Captain six months ago, because it is incompatible with the legacy Adobe Creative Suite and Maya)

  Process: Finder [2163]

  Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder

  ID: Finder

  Version:?

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Responsible: Finder [2163]

  User ID: 501

  Date/time: 18:16:48.452 2016-04-07 + 0100

  OS version: Mac OS X 10.10.5 (14F1713)

  Report Version: 11

  Anonymous UUID: 3275A424-FAD3-983D-506F-EB98F04C5948

  Time since started awake: 1300 seconds

  Crashed thread: 0

  Exception type: EXC_BREAKPOINT (SIGTRAP)

  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

  Request for clarification:

  dyld: launch, loading of the dependent libraries

  Dyld error message:

  Library not loaded: /System/Library/PrivateFrameworks/ContactsData.framework/Versions/A/ContactsDat one

  Referenced from: /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook

  Reason: image not found

  Binary images:

  0x7fff600ac000 - 0x7fff600e2887 dyld (353.2.3) < D9967621-6378-381B-A47B-5085EE476B62 >/usr/lib/dyld

  Model: MacBookPro9 2, MBP91.00D3.B0C of BootROM, 2 processors, Intel Core i7, 2.9 GHz, 8 GB, MSC 2.2f44

  Graphics card: Intel Graphics HD 4000, 4000, Intel HD graphics card integrated

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (7.15.166.24.3)

  Bluetooth: Version 4.3.6f3 16238, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: TOSHIBA MK7559GSXF, 750,16 GB

  Serial ATA Device: MATSHITADVD-R UJ - 8à8

  USB device: Hub

  USB device: Hub

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB Device: IR receiver

  USB device: Apple keyboard / Trackpad

  USB device: Hub

  USB device: FA GoFlex Desk

  USB device: FaceTime HD camera (built-in)

  Bus crush: MacBook Pro, Apple Inc., 25.1

  The installation of the OS is altered. No doubt the startup disk is defective.

  Do a 'genius' one appointment at an Apple Store, or select another authorized service provider. You may need to leave the machine there for several days.

  Back up the data on the internal disks before you turn on your computer to anyone. There are ways to back up a computer that is not fully functional - ask if you need advice.

  If privacy is a concern, delete the partitions of data with the ability to write zeros * (do it only if you have at least two backups complete, independent, and you know how to restore on a blank disc from any one of them.) Do not delete the recovery partition, if it is present.

  Keep your confidential data safe during the repair of the equipment

  Apple recommends that you remove permission to a device in the iTunes store before serving.

  * One SSD has no need to be set to zero.

• Linux host freezes with 10.0.6 Workstation and Windows 7 comments

  Hello

  
  

  I am now quite desperate because it is really preventing me from doing my job.

  
  

  I deleted Windows and I installed a fresh Kubuntu 14.04.02 (LTS) with 64 bit under my desk. I also installed VMWare Workstation 10.0.6 to run my development machines. I am now having serious problems:

  
  

  Every now and then, my full host is the gel if I'm running a Windows 7 virtualized on my workstation. The mouse only moves very slow and all the windows are very (!) slow response. My CPU monitor list all 4 CPU to 100%. If I managed to open the monitor system (or top on the console), I can see that vmware-vmx and kwin burn most of my CPU resources. If I wait 10 seconds to a minute, the system becomes usable. Now CPU goes down to normal. But as soon as I start to move a window (any one), the thing is happening again.

  
  

  Symptoms in short:

  • HOST: Linux Kubuntu 14.04.02 (x 64) on Intel i5 CPU with 8 GB of RAM and running on SSD (ext4).
  • COMMENTS: Several Windows 7 (x 32) several software running. Assigned 1 CPU and 1 GB of RAM. It comes on several guest computers.
  • Every now and then, all my CPU taking nearly 100% 4. The host CPU is used by vmware-vmx and kwin (used above) processes. Sometimes after 15 minutes, sometimes directly after turning on the prompt. No idea on reason.
  • Host of mouse, Windows, and OS works very very slow.
  • Meanwhile, Windows 7 virtual machine is inactive! Energy saving or screen saver are all off!
  • If I manage to run Taskmanager guests, I don't see an action (sometimes TaskManager itself using 60% of CPU!). Looks to me that the host is down, not comments!
  • My host is running an SSD (256 GB).
  • VM log file does not show something during this phase.
  • VMware.log attached.

  
  

  What I tried:

  • I disabled 'Accelerate 3D' for all my virtual machines.
  • I have re-installed VMWare Tools on the guest computers.
  • I run VMWare workstation with vblank_mode = 0/usr/bin/vmware
  • I recreated the machine with less hardware as possible and recharged the .vmd.
  • I converted to virtual prior to the current format format disk image (VMWare asked me to the front step, I said 'yes').
  • I have inserted a separate network card (NIC) and disabled the network card that is embedded in the BIOS.
  • I disabled the onboard graphics in the BIOS and added a card NVIDIA GeForce 8400 PCIx16 (using NVIDIA binary drivers provided by Kubuntu).
  • I removed the CD-ROM of the virtual, Audio computer, diskettes and any unused material.
  • I have tried using cpulimit strangle vmware-vmx and kwin on my host, but without success. System remains unusable in this situation.

  No success at all.

  Is there anything else I can do to put my environment in a productive state? You can imagine that this always happens in the worst situations :-(

  Any ideas?

  Thank you!

  I found this page:

  Disqus - Arch Linux becomes insensitive to khugepaged

  It seems that this did the trick!

  I ran (as root):

  never echo >/sys/kernel/mm/transparent_hugepage/defrag

  madvise echo >/sys/kernel/mm/transparent_hugepage/defrag

  Since then, everything works fine. :-)

• VMWare Workstation does not stop is a virtual completely on Surface Pro 3 machine

  Hello

  I use VMWare Workstation 10.0.3 on my 3 Surface Pro I7 with 8 GB of memory. Most of the time when I suspend my virtual machine image he doesn't stop the virtual machine completely. The result is that I cannot supply or not more and even can't leave VMWare Workstation, because it says that the virtual machine is always busy. When I force to restart my computer and start VMWare Workstation virtual machine once again watch as suspended. What is good.

  This happens only on my Surface Pro 3

  Can anyone help?

  Best regards

  Evert

  Please this post in the forum of the workstation, it is now displayed at the forum of the workspace

• First to crashing. Using the Blackmagic intensity Pro HDV sequence

  Hello. I'm with the first edition. I use an intensity pro card (blackmagic design) with
  Graphics Nvidia Q4000. It crashes on me. More with the HDV footage I'm editing.
  I have included my computer form as well as the news media of my layer source footage and sequence settings.

  Any help with this would be much appreciated!

  

  

  

  I checked your power supply based on your list of components, and he gave me these results:

  

  These numbers are without any margin of safety. Generally, I recommend adding about 10% for security. If I look at your power supply, it shows these data:

  

  This tells me that your + 5V rail may be a weak point because of missing with this power supply amperage and worth a visit. Your system needs a combined power of nearly 190 W but delivers only 150 W on the + 3.3 and + 5V rails. It also shows that it will be difficult to make a system more balanced with better disk i/o, because the power is not sufficient to add a dedicated and some raid controller most records. I would not be surprised if the power supply is the culprit here, but let your computer check this. And allow him to carefully check the time CPU, mobo, the GPU, both idle and load.

  A good setup for a balanced with such a powerful processor system would be something as described in the system of 'Warrior' here: Adobe Forums: PC to build? An update...

• Windows Update crashed my newly installed Windows 7 Pro on Lenovo T60p.

  The machine is a Lenovo T60p with the latest version of the BIOS. Recently I installed Windows 7 Pro. Works well until I have install all updates from Windows Update. System suddenly stops. When it turns on. It blue screens. When I try to turn it on again, he would recommend a repair, then it blue screens. I boot from the original installation CD, blue computer screens. W?

  I replaced XP with Windows 7 Pro.

  I got it somehow to run again by turning off the number of items (e.g., Bluetooth, card NETWORK, etc) in the BIOS Setup. After I completed the update of Windows, I'll re - activate the items one by one.

  I appreciate the prompt response.

  Nice day!

• First cc 2014 crash with the message "Adobe Premiere Pro could not find capable video game modules. Please update your video display drivers and start over. »

  I've updated for Premiere Pro CC 2014, all other Adobe CC 2014 software works very well, but the first does not load again. The start page (frame) happens - my computer everything slows down and after a minute or two, it freezes completely and comes up with the message: "Adobe Premiere Pro could not find capable video game modules. Please update your video display drivers and start over. »

  I use a macbook Pro 15 '' (2014) with 16 GB of RAM and 760 GB SSDS. "

  Help, please!

  Hi Brigitte,.

  Go to the following location and rename the folder in the name of old_folder

  User/user/library/Application Support and rename the Adobe folder

  User/Library/Preferences and rename the Adobe folder

  Then, go to the folder Documents and go to Adobe/Premiere pro/8.0 and rename the 8.0 folder

  Make sure that you are in the library of the user if you are not sure to check out the link below.

  Access the hidden user library files. Mac OS 10.7 and later versions

  Kind regards

  Vinay

• Workstation 6.5.3 under Win 7 Pro 64 taken care of?

  I searched and I can't find a definitive answer on this.

  Hello.

  It is supported experimentally.  You can check the Compatibility Guide.

  Good luck!

• ESXI and Asus P5E WS Pro and hyperthreading. How?

  How can I fix?

  

  The CPU does not support HT, so no matter what you do in the BIOS - http://processorfinder.intel.com/Details.aspx?sSpec=SLAPL.