9010 system fans

Similar Questions

• System Fan (90 b) error. Laptop HP 1000 | Product number: C8C94P4 #UUF

  I have HP Notebook PC1000 1140TU, Core i3 with windows 7 Home Basic Edition.

  Last night I turned off my laptop battery (Hibernate) low 14% mornig and today, there was an ERROR "SYSTEM FAN (90 b).

  My cooling fan does not spin at all.

  How can I solve this problem?

  cockermouse wrote:
  

  I'm afraid that it's been over a year and my warranty has expired.

  Then you will have to choose between having the replaced hinge, put up with the question or the source of another laptop.

• The system fan is out on PC... need info. to replace

  Hello

  My PC is out after receiving a message saying that my system fan was about to leave.

  Which fan is, so I can order and is it hard to replace these fans? If I try to do, I want to make sure I order fan.

  HP Pavilion #a6700y model

  series #[number of Series edited by Moderator]

  Thank you

  Cheryl

  As I said, the fan should be a 92mm fan and the standard thickness is 25 mm. The rear case fan is a 3 son, not 4. See the diagram of the motherboard that I linked.  The fan speed must be within tolerances. Low fan speed will cause an error of automatic system.  Minimum speed must be 900 RPM.

• SYSTEM FAN 90 ERROR < b >

  I have this SYSTEM FAN error message about 4-5 months back, but I completely ignored and used my phone normally even if the fan system runs faster and getting stronger but it's gone too far and now-a-days huge amount of heat is emitted from the laptop and that he will become so hot and I can't same palce it my knees and if I try to play no matter what game the FPS are falling regularly and even play couln t I tried software SPECCY, it shows my CPU and RAM went up to 85 ° C.  so please answer

  HP Pavilion dv6 Notrbook PC product name

  Product QB365PA #ACJ number

  Serial number: xxxxxxxxxxx

  Thanks for any help you can provide in this situation.

  HPUSER_XXX wrote:
  

  I have this SYSTEM FAN error message about 4-5 months back, but I completely ignored and used my phone normally even if the fan system runs faster and getting stronger but it's gone too far and now-a-days huge amount of heat is emitted from the laptop and that he will become so hot and I can't same palce it my knees and if I try to play no matter what game the FPS are falling regularly and even play couln t I tried software SPECCY, it shows my CPU and RAM went up to 85 ° C.  so please answer

  HP Pavilion dv6 Notrbook PC product name

  Product QB365PA #ACJ number

  Serial number: xxxxxxxxxxx

  Thanks for any help you can provide in this situation.

  Hello

  I think you have to go for replacement cooling fan/heat sink assembly otherwise this could damage your board, processor, card, etc.

  Before that quickly please follow the steps in this document - cleaning the vents and fans on the laptop & troubleshooting steps:
  http://support.HP.com/us-en/document/c01657439
  
  If the document above doesn't work for you, then you might want to have the phone looked under warranty, you can call in-
  If you live in the United States, contact HP- http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you are in another part of the world, start here- http://welcome.hp.com/country/w1/en/contact_us.html
  
  I hope this helps you
  
  Thank you
  
  CLICK ON 'ACCEPT AS SOLUTION' TO HELP OTHERS WITH THE SAME PROBLEM, CLICK ON BRAVO TO APPRECIATE MY ANSWER *.

• 90 b system fan does not

  System fan does not, please stop, press ENTER to continue... 90 (B)

  Laptop Presario CQ57

  Windows 7 Home premium, 64-bit OS.

  Product number B1Q23EA #ABF, still under warranty, purchased and resident in France.

  If I need to send for repair, please provide French tosend address him, thank you.

  Thank you, but I do not read or speak French well. I decided to open it and look for the dust bunnies.

  I found a tiny and removed dust Bunny, and the problem is now resolved. 4 months to break a fan, not impressed.

  My last laptop was a rabbit from the dust of the size of a gerbil before he started to complain... I don't know what my next laptop purchase will be, and what makes it not. Thanks for the reply.

• System fan 90 b error

  After 3 days because the computer and let me say that in three days I have not too much used, this error is out. So I tried to turn on the PC several times and even came out, after a few times the PC just started with windows loading upward logo, now, it seems that the problem is solved, but I ' m afraid this can appear at any time. Right now the PC works well, but after reading all the posts I'm starting to feel a little disappointed by this machine, what a shame, everyone thinks that HP is a good brand, but they are nothing more than a mask.

  Hello

  Fan

  Fan does not properly

  90 B

  The system fan may be faulty. For more information on troubleshooting heat related problems, see the fan runs continuously, the PC working slow than expected and generates the heat . It is also recommended that you perform a hard reset, because that can sometimes restore the system to the operating state fan. For more information, see reset and use, to solve software problems . If the system fan continues to fail, contact HP support.

• Should I replace the system fan or any laptop?

  For the last day, I was doing some 90 b error code when I turn on my computer. It says my system fan does not work properly and could cause problems. If I continue however, it will work for about 7 minutes, and just turn off. The left back will be really hot.

  I called HP today and they will fix it for $180 & give me a 3 month warranty, but is it useful? My computer is only 2 years old. I could just replace the entire computer through my work. Should I repair or replace?

  It is a 15 "Pavilion amd8 quad-core, 8G RAM, 1 TB HD

  Moon.

  Cleaning would be easier to try.

  It is a G6 and you would have to completely demolish the laptop to reach the fan to replace it.

  

  Try clean it first.

  If this does not work, you will need to decide what is best for you.

  REO

• Pavilion g7 - 1280sb 90 b system fan error

  Hello everyone,

  2 years, I have a HP G7

  A few days ago that I suddenly got the error message that the system fan did not work as it should (90 b).

  When I got this message the fan was still running as usual.

  I dissambled laptop and saw that there was little dust. But it is all clear now.

  After that, it worked fine for a day (fan running).

  Unfortunate the day where he worked, I got the error message again.

  I tried a few times (3) at the start, the first and the second time that the fan is running. The third time is not turning at all.

  When I try again (4) it is not turn again.

  What should I do?

  (I'm sure that the fan wires are directly connected).

  I saw this article http://support.hp.com/us-en/document/c03620929 and saw a few possibilities:

  -remove the (successful) dust and he turns friendly when I try it with my finger.

  -hard reset (tried but don't know it worked)

  -update of the BIOS (don't know how)

  And sorry for my bad English,

  Thank you

  Frédéric

  It's a bad fan that needs to be replaced. You've done everything else avoid this step.

• Connect fans double static pressure to the R4 Aurora system fan connector.

  I recently replaced the stock liquid CPU cooler in my R4 Aurora with a Corsair H80i. The Corsair pump works fine and I have seen some dramatic reductions in the time, but the Corsair double fans (which connect in the pump via a cord block in y splitter) are boring fort on more charges, a common complaint with the H80i system.

  A simple solution is to replace the fans stocks with static pressure of Noctua NF-12 PWM fans who have a DB(a) of 22.4 only Corsair vs Corsair. Rating 37.68 dB (a).

  Every Noctua fan comes with a cable 4 pin Y you can connect two NF-12 to a single fan 4pin connector, so I was contemplating doing this.

  If I connect the Noctua fans with a cable to Y for the the fan connector from the system of the Aurora, is - it safe to do and I have gain control of Noctuas twin in the Alienware command center?

  One fan Noctua NF-12 draws a max of 0.5 a. amps of Twin connected with a single splitter cable of Y I guess would then draw a maximum of 1 ampere of connection of the system fan. Then the connection of the fan system handle this current absorbed safely, in its design specifications?

  Aurora R4 - chassis Standard

  PSU: 875

  BIOS: A11

  Graphics card: GTX 760

  Windows 7 x 64

  I don't know what will happen if you use the connector overhead lighting to your fans power source, but your best bet is to look at the technical label on your old stock cooler fan; What was the stock fan is rated at is probably most amps you should be inspired through the connector overhead lighting. Alienware settled on this fan of stock for a reason; If they could have installed an amp fan higher than they would have, since Dell/Alienware always seems to use a high-power fan while another oem would have used a type of whimpier to save on production costs. Alienware has already used the nominal fans higher in & for our systems. If there is such a thing as a cooler option stock of high performance, you would browse the sources online (eBay or google) to find that spec amp of this fan is, & assume your 'wiring system' could manage the spec of improved so fan if a fan of upgrade are of course. Pass, if CmnCntr does not detect your cooler pump is running (through 7 pump connector cpu pins), chances are it is not, try to control RPM fan. You will need to test this, maybe get lucky. Short of some retro - equip delicate stock cooler 7pin to the new h80 3pin (tips: http://en.community.dell.com/owners-club/alienware/f/3746/t/19454479.aspx), for now, to plug a fan into his Council overhead lighting, see if the spin of its RPM faster under a load when times cpu rise... it could talk to you about something that CmndCntr means when he feels nothing on the 7 pin... good luck

• Compaq SR1901WM system fan failure

  I have a Compaq SR1901WM, running Windows XP, SP3, and I had to replace the motherboard. I replaced it with the exact same model, and it works very well. The only problem is, when I first put it, I get a warning that says: attention! The system fan failure! The PC to avoid damaging service please! I checked and the CPU fan is running, and there was no other fan in this case. Maybe I need to get a box for her cooling fan? I replaced the motherboard with the exact same model that was already in it. Any help would be really appreciated, thanks a lot.

  I fixed it, bought a case fan, installed, connected to the decision-making system fan and no more warnings. Thanks for your help, guys, I really appreciate it a lot.

• System fan failed error after the Swap case

  Hi, I read a number of similar positions on this issue but has not managed to solve my particular problem and was hoping someone can provide additional guidance

  I recently moved my HP Pavilion Slimline S5280t with a Cooler Master case, everything is OK except that I now get a 'system fan failure, press F2 to continue "message every time I start the PC.

  I know for sure, it is caused by the rear 120mm fan that connects to pin 3 connector on the motherboard chassis fan (I tested it with the old 92mm fan and the error message disappeared).  So based on what I read on the forum, the simplest solution is to disable / adjust the configuration in the BIOS to monitor fan, unfortunately, this option is locked to my motherboard (IPIEL-LA3) model.  If at this point, I have 2 questions regarding what I can do next:

  1. I guess the fan sensor detects for the fan RPM so since this is a 120 mm fan, the speed of ROTATION is less than a 92 mm.  It does not reach some predefined threshold and that's why the error message I received.  So I can solve the problem by exchanging the 120mm fan which runs at a higher SPEED?

  2. I read that there is a hidden menu of BIOS with some of the HP PC, accessible by pressing F11 (or some other keys that do not appear in the original start menu), I have tried F11 and which has become a diagnostic tool, does anyone know if a hidden BIOS menu exists for my particular model? (PC model: S5280t, q8300 CPU, Mobo IPIEL-A3)

  In addition, I don't think that there is an update of the BIOS for my model either... so I'm really out of options here.  Please help if anyone has any suggestions.

  Thank you!

  HW7777, welcome to the forum.

  After consultation on your problem with Erico, another Member of the forum, here's what I was told:

  "The three-pin connector for the fan has + (power), mass (-) and an analog tachometer signal." Given that you have tested the old fan on the system fan header and the error message disappeared, you have checked that the fan is indeed the question. You should try another fan to see if it did not have the rear case fan which is connected to the Sys_Fan?  If produce the same results, then you have reason on the down low, the origin of the problem.   If you want to keep the motherboard in the case of Coolermaster then you should consider making or buying an adapter to mount it in her 92 mm fan. Since the Coolermaster case is much larger, you should be able to mount the fan somewhere. There is a lot more air in the Coolermaster case compared to the business slimline the mobo was originally in. "You are right that there is no update available BIOS.

  If your problem is solved, please click "accept as a Solution.

• System Fan failure

  Hello

  I have a HP Pavilion a63301a, I get a message system Fan has failed service PC tp prevent damage press F2 to continue.

  I opened the box and found that the CPU fan was clogged with dust, so I cleaned the fans, while the box has been opened I rebooted and found that the system fan should start spinning with all the other fans, after a few seconds, the system fan stops, I can get the above message.

  I continue starting up, but the system fan does not come on again. At this point fans CPU and power supply are running it does this whenever I do a startup message and stop the fan running system.

  I replaced the fan in the system with a single, even something again it starts then stops running at startup

  I don't see all the settings for the fan in the BIOS, is there someone who can help with some advice on why this fan has stopped running, how to run again

  I download the software that allows me to monitor the number of towers and tempretures these are all the normak accept rpms from o to the system fan

  I don't know that clever people out there you will find the answer

  Help, please

  Rick

  With the correct model number, I was able to look at the motherboard, and I see a task for the fan, aka system fan.  It is followed by somewhere and I would assume that it is the BIOS.  The parameters must also be hidden, and if the change to operate the system fan is made, you will still get warning.  However, you won't be upset once you are certain that the fan is running and pressing F2 will be the start cycle.

  I think that the adapter that I showed (just if it was obvious what I was talking about) would be availible from local sources that make the work PC and parts for a living.  If this isn't the case, then try Newegg or Amazon as a last resort.

• the m8277c system fan failure

  What is considered the system fan? is it the fan 3 "on the back, I would consider the fan or the fan 3" on the motherboard? Fans seem to be working what can I do I am a novice regarding components:)

  Mck1960 wrote: Brent Merci for the reply I'm sorry I'm not sure what you mean by heat sink is the big fan on the mother? I think that's what you're referring to correct? Terry

  Hello Mck1960, the system fan is the fan which is connected to the pin system fan header. Is the fan in the back of the case ususally.

  The processor (CPU) fan is the one on top of the CPU cooler and is connected to the Strip to pins on the motherboard CPU.

  Here is the link for your motherboard specifications. Look in the presentation of the motherboard for the fan header locations.

• Compaq Presario SR1719UK, System fan fail warning

  Hi guys

  Hope you can help me with what I am puzzled.

  I have a compaq presario SR1719UK that I transplanted everything except a car fan and DVD in a new case.

  I added a new case for the new case fan and everything is properly connected, and yet on startup, I get the attention system fan failure, he has not done this in the case of the former.

  In the bios, that the temperature fits as 35 degrees with the CPU fan at about 1500 rpm, case fan display 0 RPM, even if she is running and blowing air out of the case.

  Overall, I am confused!

  Any help would be greatly appreciated

  Data sheet:

  Athlon 64 (V) 3400 + 2.2 GHz

  ATI Radeon Xpress 200

  Card mother MS-7184

  HP/Compaq motherboard name: AmethystM-GL6E

  2 GB DDR memory

  Windows 7 Ultimate (can be reversed for Linux but can downgrade to XP)

  Flex 300W power supply

  Hello sparticate, you may have installed a fan that is not compatible with the HP motherboard. Is it possible that you can replace the new fan with the original fan and see if the problem is resolved. These HP case and CPU fans have a speed sensor which tells the motherboard fan is indeed running. If the new fan has no such speed sensor drive, motherboard want to get the appropriate signal and display the error message.

• Alienware Aurora R4. The system fan problems

  Hi, here is my story/problem...
  My computer is a desktop, Alienware Aurora R4. It is less then a year old. This problem started about 5 days ago now. I called the support technique dell twice. and they don't seem to help, I got frustrated with the phone so im hoping it will work...

  So here's the question: my system fan continues to operate at 4150-5000 rpm and only goes to about 1400-2200 rpm at idle. Today, it has begun to stop randomly. I watched 3 ambient temporary sensors all remaining 24-26 degrees Celsius. The PPI and the fans of hard drive are good at all about 1456 and 1089 RPM.

  Initially the RPM increased while I was gaming. but it did not take long and now whenever I try to do anything he will get very hard and RPM goes crazy. Originality, my PC would be slowed to about 1200-1400 rpm and only go up to 2200-2400 RPM, where the game. its almost as if it was under high load when it is not. and its cool so I'm sure that's not over heating.

  I disassembled the pc and cleaned all the fans and dust with the correct air boards. I have confirmed that everything is properly connected. When that didn't help, I found BIOS version A05 then I updated to the A07.  I ran the Dell PC Diag and it passed, the autopsy of alienware last, Ive ran several analyses of McAfee antivirus, reinstalled the Alienware command center and down the stock of dell pc - which posed problems. I paid and installed the mechanic system and fixed these issues.

  The first time I called Dell tech support guy was very friendly and I have not heard his name. He did lose his time with my settings of video card (not sure why as its only the system fan connected to the wheel and the pump, that is the question) he said that he had to be updated so it updated my video card, and that's all. told me he would send me the next day to check if it worked or not. There has never been back in contact with me, and I have no e-mail address. But all that adds to the question... because since he did this update my gaming experience is terrible. I only play World of Warcraft currently. Normally, my FPS are 75 to 100 FPS and now they jump around a bit, but mostly to sit at 2-17 FPS and sometimes go to 50 FPS, if I'm not moving. So im guessing the settings it's fair question... my card is a 2 GB AMD Radeon 7870

  Then, I recalled once again a day later. and the next guy was not as friendly. don't give me his name either. he wouldn't do anything, he just told me that the notes from the last call said that it was not a problem, and that it was quite normal heating. I'm sorry but my house is way cooler in the summer then it's winter and temperatures are always flat and stable. its blowing cool air and a large amount of air. He didn't listen at all.

  then the next day it remains to 4150 rpm for 90% of the day instead of 60% of the day. even if im not using it. And she randomly stopped several times. from what I can find on these forums and online that is as a module fail safe mode... so obviously it is not normal!

  As today is the first day it started to close I wanted to re-run the diag tests, but whenever I try, it runs for a few minutes, then the pc stops. The computer is running too slow, but this may be a different problem. I managed to get the dell diag and system mechanic to run tests, and they spent too. IM at a total loss...

  The air coming from the fan system is very strong and cool so I don't think there are more heating goes on. As far as I can tell the pump works properly and all the fans are running.

  This pc is less then a year old, so it is still warranty on it, as well as I, have purchased another year of warranty shortly before it started actually... And I don't want to try something else without help, because I don't want anything damage or damage my warranty coverage

  I'd appreciate very much any help im at a loss to know what to do, and feel the support tech will start ignoring me if I recall more. If you can help out you can reach me at my email which is [email protected]. Or respond to this conversation.

  Thank you and hope to hear from you,

  Katelin

  Hi, looks like your processor is overheating and your system shuts down in order to avoid that the components of frying. Install the utility core temperature and set up the readings of temperature on your hearts. www.alcpu.com/.../download.php  Your thermal paste can must be reapplied or your water fountain might need to be replaced. Let me know what your temperatures are for the carrots and the ambient temperature.