920C HP: 920C
I have an old 920C, and I would like to address them.
I need to know where I can get the circular spacers rubber on the plastic wheels that move the paper? I also need to know how to open the printer to replace? There, any help would be appreciated.
Hello
I've included a link below to the site of spare parts for each country.
http://WWW8.HP.com/us/en/contact-HP/WW-how-to-buy.html
Tags: HP Printers
Similar Questions
-
HP deskjet 920C: deskjet 920C in Toolbox ink levels
As I changed again to a new computer with Windows 8.1 my printer works fine, BUT I can't figure out how to find my ink level as I have in the Toolbox of the printer on my old computer with Windows XP. Any ideas?
Welcome to the forums @6sckn,.
I read your post on how you can access is more the Toolbox of the printer after now using another computer running Windows 8.1 and wanted to tender hand. Why you can't access the box tools any longer, it is because there is no complete driver available with the 920C on Windows Deskjet 8.1, as it was with Windows XP. You can still continue to check levels of low ink in the printer (below image from the user manual).
I hope this helps!
If you want to thank me for my answer a helping hand of loan, click on the below!
-
My hp deskjet 920C is now incompatible with my HP omni 120
I have a HP deskjet 920C printer.
I just bought a new computer from HP omni 102 and it says that the printer is not compatible with my computer. I now need a compatible version of Windows 64 - bit version.
Where can I get that?
Please open the HP Support Assistant and the post what is presented as the product number or name of the product for your PC.
Your printer is compatible with the PC. Windows 7 already includes the drivers. You will need a USB cable between the printer and PC connection to install the driver. Follow the instructions on this document from HP web.
-
positioning of the HP 920C photo paper
I inherited a 920c hp that has barely been used and works perfectly. However, I can't understand how to position the paper photo 4 x 6 so that he pulls through and prints. Have the original manual, but he gives no details. Can anyone help? Thank you.
Hello
Please refer to the manual page, next #36:
http://h10032.www1.HP.com/CTG/manual/bpd08798.PDF
I hope this helps.
-
I have a Deskjet 920C I need to download a driver.
My OS is Vista Home Premium Service Pack 2.This computer is never put on line Internet, and I don't want to do it now. I searched online, but the only drivers I found require a scan, a separate driver installer or another method that requires the Internet connection.
I tried every avenue ends by "you don't need to download a driver, it is included in your Windows Vista."
This could be in a perfect situation, but my situation is far from it!
What is the name of the file from the HP driver for the Deskjet 920C printer in Windows Vista Home Premium, and is there a download site that will allow me to download this single file?
I need to download the file on this computer (Linux) and transfer it to the Vista system via a USB key. This should not be difficult, except that Microsoft and HP seem to think that we, the users are too stupid to see given the necessary information, at least that's my opinion now.
Thanks for any help you are able to give.
I stumbled upon a solution that worked. I deleted the printer in Control Panel, run "Add a printer" and choose "add a local printer. (The weird part is "Use this option only if you do not have a USB printer.") He presented a list of printer where I chose HP 920c. In order to complete this action, I received a menu of connection ports. The list of ports has only a USB input: 'USB Port virtual' which I chose. The dialog box "Print a test page" appeared and the test page print. I clicked on "Finish" and completed the work.
-
DeskJet 920C and windows 8.1
As soon that I've updated for Windows 8.1 of Windows 8, my HP deskjet 920C printer not working. I tried to download the detection software and pilot of the plane, but your site can not detect my printer, even when it is connected to the computer, and the firewall is down. WHAT should I do? Desperate enough. Thank you.
I don't know what I did, but the printer works again. I went through all your suggestions much about using a USB cable. Even pleaded my case at Best Buy Geek Squad, which also said that a) 8.1 sucks eggs and b) is probably not a hardware problem. So, thank you!
-
DeskJet 920C only print black (and red)
Our deskjet is only an impression with red ink despite the installation of a tricolor ink pack nine. We thought that maybe the old tricolor cartridge was low on blue and yellow because it seems the problem had increased over time, but there is no such excuse for this one. This occurs on our Mac with different operating systems, so don't think that she is computer-related.
Thanks in advance.
Oh, when you said new cartridge I didn't know that they are 3 years has expired (which means that they have been manufactured in 2004 or 2005). Your problem is most likely the outdated cartridge.
Have you tried to do a service of cleaning cartridges through the driver (System Prefs, Print & Fax)?
-
I am trying to install a printer, and it will not print
I have a HP Deskjet 920C printer and had to change cable because of the new Tower, can not get printer to work
This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions. You should look at the HP web site. http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&LC=en&DLC=en&cc=us&lang=en&product=60753
-
Change of power supply for the Alienware Aurora r4
Hello, since my diet is reel whining I would change it
I was looking for a bit of the PSU and found this one
http://www.EVGA.com/products/product.aspx?PN=210-GQ-0850-v1
is it good?, fit into the section of PSU aurora r4? It will connect to the back plastic, that normal power supply is connected to the rear?
Also I don't know anything about sata cables, but there so much that normal power supply I mean it will be able to connect to what it is now? (only the change requiring more sata is the addition of two extra hdd/ssd (there was a spare sata cables))
and... I need something more than that? (some wires or something?
I have not wand to buy the same PSU again because seeing how it survived...
Hello. I will address this, knowing that other users information. Your old harness case will be removed, the new chassis will have its own cables. The EVGA 850 GQ is ok, but the G2 is better, you can find them on Newegg / eBay / EVGA.com etc.
I posted here, p4 #31, a list of links to swap & material, then go ahead, some links redirect here, like this:
No - ALX a front SATA, so work of any type of SATA cable
Chassis rear a SATA ALX
who need some type of head SATA short height, like the originals
- ALX not can use either type, due before access
- ALX must use 'pass-thru' heads, like the originals, if the power is connected to the wall box
EVGA uses these types of base with non - ALX SATA heads
"standard heads.
above, my Corsair cable has ALX-type amp heads:
- the plastic is a two-piece, the rear insulation snaps off the coast
- in an ALX installation, with the cable above, I would jump off the top, cut the wire to length, & apply two heads on it to mimic the original as close as possible
If I had the EVGA SATA type?, I want to buy x 4 amp heads online:
Note the two types of rear covers: "cap" (for superior insulation) & pass-thru-cap
I would use these to "build" my own pair of cables to match the original cable pair, best I could. I could just shop any spare cable to amp heads, like here. My ALX has a set of hand-made cable, I already have the SATA cable mod, so they mimic the original case harness. Chassis no - ALX may not be no need for this type of care
cs_setInnerHtml ('video_52a58bc9-1a1c-4f67-920c-275deafe8f88', ");
Video: If your ALX means that you must transfer new SATA faces on
note of the need for the extra long screwdriver get screw wall box
Search "Power of Aurora" (Exchange of Aurora psu) or similar terms, search for images which could connect you to the messages posted by other users
- not that X-Fire / SLI configs do best when using flat ribbon cables
- EVGA uses sleeved around cables, cable so better manage you can
"" All ATX power supplies are 5.9 "x 3.4", it's length is variable, & 'all' chassis PSU "should" adapt Aurora R1 - R4, with a chassis length 7.5"(190 mm) & shorter: example EVGA G2 is 7.1" length = ok, & my Seasonic 1250 is 7.5 "length, about maximum a person wants. Please read everything in all the links I already posted in, I won't be able to help beyond what I posted here. The G2 if it feels right for your case & know-how (=
- SEASONIC Platinum 860 & plate 1050have Ribbon types
- Corsair RM850i Gets a 9.9/10 JonnyGuru, world best PSU review site & forum, also has the ribbons dishes, $ 130 after rebate
-
window 7 refused to install hp deskjet 920series
Window 7 refused to install hp deskjet 920serie printer. I'm trying to install hp deskjet 920 series hp Mini laptop on Windows 7 computer, but he refused to run. He has only to install 920c Printer Wizard. And when I try to continue with the installation, it won't work, but it will freeze my pc and I had to reboot the system. All my effort not to run, so I need your help, show the easy way to run or install the printer hp deskjet 920series.
Hello
You need your exact printer model number, there are three in the series.
http://WWW8.HP.com/us/en/support-search.HTML?tab=1#/qryterm=DeskJet%20920series&SearchType=s-002
And a search for HP 920 series can't with 920c series 920.
Find by productGo3 matches found. Please select a sub HP Deskjet 920c Printer seriesClick the appropriate model number which will take you to a Web page where the appropriate drivers are available for download to your particulare 'bit' operating system.
There also tabs of Troubleshooting, the User Guides to contact HP , at the top to help you.
Or you can ask in the Forums of HP's Support.
http://h30434.www3.HP.com/PSG/
See you soon.
-
Hello I have bought a new laptop and I just got Windows 7 with her. My problem is that my printer / the sofware of it doesn't start to install it, after I download the software from this site. So please send me some links to some new drivers. Thank you
These instructions worked for me, the only exception that instead of selecting the driver 990 c, I had to use the Deskjet 920C printer driver. With the 990c all the printed pages were empty. I now the Deskjet 916c running with the Deskjet 920C driver. The only downside that I have now is that the driver does not seem to support the manual duplex, but at least I can print. Thanks for the pointers.
-
The total error is: there was an error opening this document. The size of the file exceeds the limit and cannot be saved.
I don't think that player had a size limit? The file is only a few hundred MB.
Does anyone have an idea what could be causing this error?
-Richard.
Is it a document online or local?
Maybe you are looking for
-
iPhone don't shuffle the songs ☹️
My iPhone 5 c don't shuffle the songs. He repeats just the same song over and over again. Any suggestions? I went to General settings but her does not work either!
-
When secure Web (those using SSL) pages contain content from sources non - SSL, Internet Explorer 8 and 9 ask if you want to show only the content that has been delivered safely. I could not find a prompt similar to Firefox. I know three possible exp
-
His problem: my friends can hear me but I can't hear them
When friends call me on Skype, they can hear me but I can't hear them. My audio is high enough and generally works well for all the things on my computer. I use Mac 10.6.8 and Skype 6.3.0.602. Advice?
-
HP pavilian photo card reader will not work.
-
BlackBerry Dev Alpha - touch screen capture?
Y at - it a shortcut to make a screenshot on the real device Dev Alpha? I prefer to use it if possible more it captures ripple. Thank you!