A problem with the accuracy of recall of synchronized calendar from my laptop to my windows phone 8 and vice versa.

Similar Questions

• I have a problem with the payment: (why charge me 44,99 EUR (cost 61.99 euros) then block system and I can't use the programs :(

  I have a problem with the payment why charge me 44,99 EUR (cost 61.99 euros) then block system and I can't use programs

  Please click Accounts & billing link here https://helpx.adobe.com/contact.html to have a conversation with our billing support team.

  Thank you

  Stéphane

• Problem with the new printer print only some word from the quarterdeck documents

  I hope someone can help. I have a Dell Vostro and had 8 happy years print on a Canon printer. I just upgraded to a Canon Pixma iP4600 printer. I think that with some (not all) MS word documents it prints the rear tray (mean't for photo paper) by opposition to the tape before (designated for plain paper), for which I set the properties of the printer.

  Canon tech support say there is a Windows problem. I already reinstalled the printer driver but sill the same problem. Hope someone can advise.
  Happy Days!
  Bryan

  Hello
   
  This phenomenon only occurs with word documents?
  Have you checked if this happens with any other application?
   
  As you have already defined the properties of the printer and the problem is only with a few word documents. The first step would be to check if the word printing settings are defined in law.
  To fix printing on word problems, see the steps mentioned in this link:
  http://Office.Microsoft.com/en-us/Word/HP051887411033.aspx
   
  Sometimes this also happens if the printer settings are ignored when you print a Word document. To check if these settings are correct, try the steps mentioned in this article: http://support.microsoft.com/kb/904805
   
  If you still find difficulties in printing, run the Microsoft Fix it to reset the settings: http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-printer-problems
   
  Post back with the results, so that we can help you better.
   
  I hope this helps.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• I have a problem with the display of text on Corel Draw X 3 after installing a Windows Update.

  Hi all

  No, not so much a question, but I thought I'd post here because it can help others.

  I used Corel Draw X 3 yesterday (12/12/12) to make a simple business card text only. Today - the file open and something is there, but the text is invisible. Further investigation revealed that this affected all fonts and Type 1 fonts from OTF, TTF fonts are immune to the problem.

  What has changed between yesterday and today? A Microsoft update that I shut down the computer last night. I uninstalled the update via Add/Remove Programs, and the problem was solved.

  Any suggestions as to who should I report this problem?

  -Frank Jones
  Dynamic funds, Geelong, Australia

  Original title: Win XP update Corel X 3 12/12 font management breaks?

  I have installed the latest updates and the v2 of KB2753842 solved the problem. Thank you.

• I live in Switzerland, but there is a problem with my address! I can't change from USA to Switzerland! invalid phone ist number from the Switzerland. I would like to book an abo creative cloub!

  Wie kann ich die Adobe Hotline anrufen?

  (800) 585 0774 ist ungultig für die Schweiz

  Hilfe

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• problem with the files of exported data after conversion from 10.1 to 10.3 OPA OPA

  Hello
  
  If all goes well a relatively simple question
  
  We have recently acquired access to the OPA 10.3
  
  We have previously developed a 10.1 modules which we imported 10.3 using the upgrade features. This one is designed to be an interface from machine to machine and as such is entirely dependent on the Fed data to make decisions, there is no question screens or interviews.
  
  Then, we have tried to import some ".xds" files we had created to 10.1. There are more than 160 of them, including in general more than 120 items of data in each with multiple entities and bodies.
  
  When we import in 10.3 you get an error message which reads:
  
  
  + "System.NullReferenceException: object reference not set to an instance of an object." +
  
  + Oracle.Determinations.Remote2.Util.LegacySessionDataXDSImporter.ReadEntity (XMLStreamReader reader) +.
  
  + Oracle.Determinations.Remote2.Util.LegacySessionDataXDSImporter.ReadSessionData (XMLStreamReader reader) +.
  
  + Oracle.Determinations.Remote2.Util.SessionDataXDSUtils.ImportSession (SessionData sessionData, Rulebase rulebase File xmlFile) +.
  
  at Oracle.Modelling.Debugger.Core.UI.DebuggerRunView.btnImport_Click (Object sender, EventArgs e) + ' + '.
  
  the simple solution is for us to reintroduce the '.xds' files in the debugger, but given that it it took over 2 weeks for our team at the entrance of the '.xds' in the first place, we would obviously like to explore other options first!
  
  Any help or ideas would be greatly appreciated
  
  See you soon
  
  Dave

  Hi Dave,.

  I have this working on the copy of the modules I've had, it's because your entity / relationship public names do not match the .xds, probably because of the upgrade file. I sent you an email on this subject.

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• Problem with the desktop icons

  I have the problem with the desktop icons... they come from both sides... one above the task bar and on the other hand under the task bar too... I'm unable to remove those who are below the taskbar.

  Hello

  You can try following the steps provided below and check if this can help, make sure that closing all open programs:

  (a) the Task Manager open by right-clicking on the taskbar

  (b) in the process tab, right-click on "explorer.exe" and complete the process

  (c) screen will be blank, except for the Task Manager.

  (d) open the file - new task (run)

  (e) enter "explorer.exe" click OK.

  If the problem persists, try to create a new user account and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  See also: http://windows.microsoft.com/en-us/windows-vista/fix-a-corrupted-user-profile

  Hope this helps,

• Problems with the data connection

  Hello
  I bought a Z3 Compact Xperia on December 10, 2014. I live in Italy and I use Vodafone as my everyday.
  I got a SIM card replacement nano with LtE capabilities just to get the phone in the new fast network. The problem I encounter is that, since on January 13, 2015, I had some problems with the data in mode 3 G connection.
  So far, I used my phone normally, then I tried to send a text message with WhatsApp and phone stuck with the clock icon in the lower corner of the bubble of the message. I thought it was a temporary network problem but I'm not sure about this.
  I live in a small town where the coverage is really good, either in 3G and LTE. I tend to use the 3G because it uses less battery and it does not affect my 4G data plan.
  Th issue, it's that if I do a speedtest when I feel that network glitch I have a ping, but with very good download speeds up to 2000ms.
  The problem is that I believe that this is not a network problem because my mother has a phone HtC One S and runs vodafone without problem even when I'm having the glitch.
  I tried to reset the phone to factory settings, but it did not help.
  In LTE / 4G I do not experience this issue. In fact, I think if there is problem need a phone related software because the antenna works very well.
  If it doesn't I'll try to contact ad Vodsfone then I'll send my phone for the helpdesk if Vodafone tell me that the question is not on their network.

  Thanks in advance for your help.
  Simone

  It's pretty strange, double check the APN settings and contact EE in this regard.

• I have problem with the escape key

  I have the problem with the ESC key... is sometimes from time to time I press my ESC key on my labtop that he would open to the top of my Start menu... there at - it a config that I can turn it off?  Sometimes I play computer game it just annoying someone help please (I'm using Windows vista)

  Hi techon,.

  Welcome to the Microsoft answers site!

  Make sure that you not press CTRL when ESC is crossed.

  Please note the keys CTRL + ESC will bring up Start menu.

  You know, keyboard shortcuts
  http://Windows.Microsoft.com/en-us/Windows-Vista/keyboard-shortcuts

  If the problem persists, you can follow the steps mentioned in the link below:

  Troubleshoot wired keyboards that do not or only the erroneous characters category

  http://support.Microsoft.com/kb/258826

  If the problem persists, please consult the manufacturer of the laptop computer for more information.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Problem with the drive of entry

  Hello

  I have a problem with the connections of socket on blackberry.

  I send a command to my server and it will answer me with something like

  WORM R1; ACT: 0; CLV: 1.0.0; PRO: 1.0.1; UID: carlsum@ociss

  SC = (SocketConnection)
  Connector.Open ("socket://fes.ngv-group.com:5080; deviceside = true");
  sc.setSocketOption (SocketConnection.KEEPALIVE, 5);
  is = sc.openInputStream ();
  OS = sc.openOutputStream ();
  OS. Write (Protocol.doVersion (UID). GetBytes());
  OS. Write (Protocol.doLogin (UID). GetBytes());
  int bytesAvailable = is.available ();<----returns a="" value="" of="">
  Char input [] = new char [bytesAvailable];
  for (int i = 0; i)< bytesavailable;="" ++i="" )="">
  input [i] = (char) is.read ();
  };

  However my contribution [i] array only contains v.

  Why is - this is.available line () returns 0?

  How to read in the range full of WORM R1; ACT: 0; CLV: 1.0.0; PRO: 1.0.1; UID: carlsum@ociss in my input array

  I agree that treatment work should you find.  I suspect that you have a coding bug.  Take a look at the folloing code.  The result was what I expected:

  test
  t
  e
  s
  t

  Byte [] testBytes = new byte [] {(byte) 0 x 74, (byte) 0 x 65, (byte) 0 73, (byte) 0 x 74 x};
  String testString = new String (testBytes);
  System.out.println (testString);
  Char [] testChars = testString.toCharArray ();
  for (int i = 0; i)< testchars.length;="" i++="" )="">
  System.out.println (testChars [i]);
  }

• I can't play DVDs in Windows Media Player 12 on Windows 7 Pro and get this error msg: Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  Hello, thanks for reading and helping me.

  I try to play a legitimate, belonging to DVD, but Windows Media Player 12 will not play on my computer Windows 7 Professional.  The DVD worked a few days ago, but all of a sudden, I get the following error message:

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I did a lot of research of these forums and on the ' net.  Here are the suggested steps I tried without success:

  • I tried VLC player.  This works.  However, rather than use this workaround, I wish to find a solution to my problem WMP/WMC.
  • I tried several DVD for years over the last decade.  These DVD works on my laptop, also running Windows 7 Professional and the shark 007 codec.
  • I uninstalled my Shark 007 codec
  • I tried other codecs (K-Lite)
  • I assured that the latest drivers are installed on my video card, XFX ATI Radeon 5850
  • I tried to uninstall Nero 9
  • I tried to use the Windows 7 troubleshooting options:
  • > Reading and burning CD, DVD and Blu - ray (no problem)
  • > Windows Media Player DVD (no problem)
  • > Windows Media Player Settings (detects a problem, wants to restore factory settings, every time, no matter what happens)
  • A system restore to a time when the DVD was working did not resolve the issue
  • The different links in Microsoft, I found in this forum about this problem do not seem to be useful.  There is a link that points to the set-top boxes, but this page just says: "Windows 7 comes with a decoder.
  • I assured the latest driver is available by going to "Device Manager", right click on the drive, then click on "update driver software".
  • I assured that the latest firmware is installed directly from the manufacturer's website.
  • I tried to reset my DRM by renaming the DRM under C:\ProgramData\Microsoft\Windows folder and by going to this Web site to upgrade:http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp?force=1
  • I've uninstalled and reinstalled Windows Media Player 12 and Windows Media Center via the function "functionality in Windows.

  I would be very grateful if a Microsoft technology could chime.  Thanks for your help!

  MY COMPUTER:
  DVD drive: TSSTcorp CDDVDW SH-S203N ATA Device (Samsung)
  Driver: Microsoft 6.1.7600.16384, dated 06/21/2006
  Graphics card: XFX ATI Radeon 5850 Black
  Motherboard: Gigabyte GA-X58A-UD3R
  Processor: Intel i7-920

  -Intel i7-920, Corsair 6 GB of RAM, ATI Radeon HD 5850, Gigabyte GA-X58A-UD3R, Corsair 800 d case

  Hello

  Try this free program:

  http://www.DVDFab.com/passkey-Lite.htm

  Carlos

• We get an error "there is a problem with the device' while trying to use it on the computer of Windows 8

  Sir... my model of computation used is ASUS Q500A and I also have the problem with my may even of them I also perform step u said in this forum, but may not work... my Windows I have used is windows 8. Please help me tnx

  Separated from -.

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/getting-an-error-theres-a-problem-with-your-camera/9c494984-1178-4C3F-884c-80ac750d3fa6

  Hello

  Thanks for posting your query in Microsoft Community.

  This problem is usually caused due to hardware or driver related issues. I suggest you try to install the latest drivers for the camera on the Asus or Windows Update site and check if it helps.

  If the problem persists, then it would be better to contact Asus for more help on this issue. As this could be a problem with the hardware as well.

  Support from Asus: http://www.support.asus.com/

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• Upgrading to Windows 7 HP Pavilion dv6500 and have a problem with the resolution

  OK, here's my problem. I had Windows Vista, has been sick with it. I'm not used to ask someone if I can or can not install some software or OS, so I have two formatted partitions (recovery hp too) and installed windows 7 now, I discovered that he had a lot of problems with the drivers. I have successfully resolved all of them, even my hp legacy works and everything else, except the driver Nvidia. My screen resolution is 1024 x 768 and should be 1280 x 800. I tried all the drivers that are provided in the topic above here (dv6000 - dv9000 update for Win 7 or something like that) also downloaded and installed this driver "179.48_notebook_winvista_win7_32bit_beta", nothing helps worked on this problem for 2 days, am tired and ask for help I need resolution 1280 x 800 on my screen , and I now have 1024 x 768.
  Product: HP Pavilion dv6500
  s/n: CNF7310HBF

  p/n: GT391EA #ABB

  AMD Athlon X 2 and probably GeForce 7 GB video series...

  PS sory for my English.

  Dan or one of the others may be able to help if you post exactly what indicates the error.

  As you say you are not a noob so maybe you need to change something in the NVIDIA Control Panel. Maybe go to the advanced option when you're at NVIDIA.

  Personally when I clean installs I delete, and format the entire disk before installing W7. Doing it this way usually prevents this kind of error occurs. When you use the W7 install disk to format, it may not remove all of the old files registry Vista and can cause problems.

  If you start from scratch once again, this may solve your problem, but there is no guarantee.

  It took 4 tries on my HDX from Vista to W7 to do things.

  I just took a glance at my NVIDIA advanced and under Show options there is an option to "manage custom resolutions. Here I could input what I wanted. What's your has that?