A question on the DMM hardware.
Hey, people! I have Cisco MXE3500, Cisco (HP DL380G6) DMM, Cisco SnS (wave 754).
Cisco MXE has three gigabit ethernet interfaces, DMM SnS of four, two Cisco Cisco. I wanted to ask if these devices are supported by the aggregation of links (LACP).
Thanks in advance.
Hi Alex,
I'm afraid that the answer is no.
For DMM and SnS, allows only one interface. On the MXE, you can use several interfaces at the same time as long as they are in different subnets.
Concerning
Daniel
Tags: Cisco Support
Similar Questions
-
Three questions about the version of the hardware and VM tools
Hello
I have 3 questions about equipment and tools of VM version, can someone help? Thank you in advance.
1. is the machine hardware version virtual file OVF/EGGS associated with? OVF/EGGS exported vSphere files contain the virtual hardware version information?
2. review I have a VM in vSphere 6.0 platform with version 11 of hardware and the latest Tools (cam with ESXi 6.0 U2) VM, I can export to an EGG file, then import it on vSphere 5.1 platform? If can, what version of the target material is VM?
3. can you vmtools high version with lower vSphere platform? For example, I have a virtual machine with version 11 of material and tools the latest VM (ESXi 6 U2), later I move the 5.1 ESXi virtual computer, should I go down the vmware tools? Is there a compatibility issue?
Hello
1. Yes, if you unzip the eggs and open the FVO in an editor you see:
2. you can not. Vmware 11 material is not supported by 5.1.
3 didn't cause you cannot import vmware 11 and 5.1. Works may be more high vmtools as long as you keep the material support for 5.1 version.
Best regards
-
Yes, another question regarding the freezing of Safari - EtreCheck report included
Yes, another question regarding the freezing of Safari.
From a little over a month (I think), Safari started freezing regularly whenever I want to open new tabs or switch between tabs. I found myself to leave the program several times per day / hour. I can't identify any specific common cause (other than my MacBook being old) or any new software or updates that might have initiated the question. At first I thought he might have many tabs, I tried to open, but recently it happens even with only a few tabs open.
I worked through the steps I found in this forum and others: empty the cache, start in safe mode, etc nothing works.
Based on the previous suggestions, I have downloaded and run EntreReport which I included below. The note and maybe just a distraction, but EntreReport has crashed three times tonight, before he was able to produce the sub report. I ran the report after restarting my system with no other programs running.
Suggestions are welcome at this stage because I want to start using Chrome or Firefox because I like the transfer procedure between my devices.
Thank you in advance.
Ben
-----------
EtreCheck version: 2.9.11 (264)
Report generated 2016-04-28 22:48:58
Download EtreCheck from https://etrecheck.com
Time 05:45
Performance: Below average
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Click on the link [check files] help with unknown files.
Problem: Apps are broken
Description:
Safari freeze when opening new tabs / switching between the tabs.
MacBook Pro (15-inch, mid 2009)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro5, 3
1 2.66 GHz Intel Core 2 Duo CPU: 2 strands
4 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 2 GB DDR3 1067 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1067 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = battery check - Cycle count = 389
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1440 x 900
NVIDIA GeForce 9600M GT - VRAM: 256 MB
OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour
FUJITSU MJA2320BH FFS G1 disk0: (320,07 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Macintosh HD (disk0s2) /: 319,21 go-go (54,93 free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
HL-DT-ST DVD - RW GS23N)
Built-in ISight from Apple Inc..
Card reader Apple
Apple Inc. BRCM2046 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Mac App Store and identified developers
~/Library/LaunchAgents/com. GoodShop.updater.plist
~/Library/application support/GoodShop/updater
A unknown file found. [Check files]
/ Library/Application Support/Symantec/virus
[no charge] com.symantec.kext.SymAPComm (11.1.2f17 - 2015-05-23) [Support]
/ Library/Extensions
[no charge] expressvpn.tap (20150118 - 2016-04-12) [Support]
[loading] expressvpn.tun (20150118 - 2016-04-12) [Support]
/ System/Library/Extensions
[no charge] com.DYMO.usbprinterclassdriver.kext (1.1 - SDK 10.9-2016-04-12) [Support]
com.Silex.driver.sxuptp [no charge] (1.5.1 - 2016-04-12) [Support]
com.symantec.kext.internetSecurity [no charge] (1.3.2 - 2016-04-12) [Support]
com.Symantec.kext.IPS [no charge] (3.2 - 2016-04-12) [Support]
CMA: path: / Library/StartupItems/cma
RosettaStoneLtdDaemon: Path: / Library/StartupItems/RosettaStoneLtdDaemon
Startup items are obsolete in OS X Yosemite
[loaded] 8 tasks Apple
[loading] 165 tasks Apple
[operation] 65 tasks Apple
[loaded] 45 tasks Apple
[loading] 161 tasks Apple
[operation] 83 tasks Apple
[no charge] com.adobe.AAM.Updater - 1.0.plist (2016-04-28) [Support]
[failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-10-31) [Support]
[operation] com.epson.Epson_Low_Ink_Reminder.launcher.plist (2015-01-19) [Support]
[loading] com.epson.esua.launcher.plist (2015-06-29) [Support]
[operation] com.epson.eventmanager.agent.plist (2014-09-21) [Support]
[loading] com.google.keystone.agent.plist (2016-03-01) [Support]
[operation] com.mcafee.menulet.plist (2016-03-23) [Support]
[operation] com.mcafee.reporter.plist (2016-03-23) [Support]
[loading] com.oracle.java.Java - Updater.plist (2013-11-14) [Support]
[operation] com.symantec.uiagent.application.plist (2010-11-16) [Support]
[operation] com.trusteer.rapport.rapportd.plist (2016-03-19) [Support]
[loading] com.adobe.ARMDC.Communicator.plist (2015-10-31) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-10-31) [Support]
[loading] com.adobe.fpsaud.plist (2016-04-15) [Support]
com.DYMO.pnpd.plist [no charge] (2014-10-16) [Support]
[loading] com.expressvpn.tap.plist (2016-01-27) [Support]
[loading] com.expressvpn.tun.plist (2016-01-27) [Support]
[loading] com.google.keystone.daemon.plist (2016-03-01) [Support]
[loading] com.macpaw.CleanMyMac3.Agent.plist (2016-04-18) [Support]
[operation] com.mcafee.cspd.plist (2015-05-08) [Support]
com.mcafee.ssm.ScanFactory.plist [no charge] (2016-03-16) [Support]
com.mcafee.ssm.ScanManager.plist [no charge] (2016-03-16) [Support]
[operation] com.mcafee.virusscan.fmpd.plist (2016-03-22) [Support]
[loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]
[loading] com.oracle.java.Helper - Tool.plist (2013-11-14) [Support]
[loading] com.symantec.MissedTasks.plist (2009-11-10) [Support]
[loading] com.symantec.Sched501 - 1.plist (2014-08-27) [Support]
[loading] com.symantec.Sched501 - 4.plist (2015-01-08) [Support]
[loading] com.symantec.Sched501 - 5.plist (2015-01-08) [Support]
[loading] com.symantec.avscandaemon.plist (2009-10-10) [Support]
[operation] com.symantec.diskMountNotify.plist (2009-09-14) [Support]
[loading] com.symantec.navapd.plist (2009-09-14) [Support]
[loading] com.symantec.navapdaemonsl.plist (2009-11-14) [Support]
[operation] com.symantec.sharedsettings.plist (2009-07-22) [Support]
[operation] com.symantec.symSchedDaemon.plist (2009-11-10) [Support]
[operation] com.symantec.symdaemon.plist (2009-03-27) [Support]
[operation] com.trusteer.rooks.rooksd.plist (2016-03-19) [Support]
com [running]. GoodShop.updater.plist (2013-09-24) [Support]
[loading] com.adobe.AAM.Updater - 1.0.plist (2015-10-25) [Support]
[failure] com.facebook.videochat. [entrenched passage] .plist (2014-08-09) [Support]
[loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-04-25) [Support]
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Application of Google Reader (Google Drive.app/Applications /)
Dropbox application (/ Applications/Dropbox.app)
ExpressVPN application (/ Applications/ExpressVPN.app)
CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 4.app/Contents/MacOS/CleanMyMac 3 Menu.app)
[ongoing] com.DYMO.pnpd
[ongoing] com.getdropbox.dropbox.83552
[ongoing] com.google.GoogleDrive.81632
[ongoing] com.macpaw.CleanMyMac3.Menu.80672
[ongoing] com.mcafee.ssm.ScanManager
[ongoing] com.mcafee.virusscan.ssm.ScanFactory
[loading] 420 tasks Apple
[operation] 193 tasks Apple
o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]
Default browser: 601 - SDK 10.11 (2016-04-18)
Flip4Mac WMV Plugin: 2.4.4.2 (2012-12-25) [Support]
DYMO Safari Addin: Unknown - SDK 10.9 (2014-10-26) [Support]
AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]
FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]
Silverlight: 5.1.30514.0 - SDK 10.6 (2015-09-16) [Support]
QuickTime Plugin: 7.7.3 (2016-04-12)
Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]
googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]
iPhotoPhotocast: 7.0 (2010-11-15)
AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]
SharePointBrowserPlugin: 14.3.0 - SDK 10.6 (2013-02-09) [Support]
SiteAdvisor: 2.0 - 10.1 SDK (2015-03-30) [Support]
JavaAppletPlugin: Java 8 updated 77 03 (2016-04-18) check the version of build
AdBlock - BetaFish, Inc. - https://getadblock.com (2016-03-30)
Add to wishlist Amazon - Amazon.com - http://www.amazon.com/wishlist?ref=cm_wl_saf_ext (2011-07-09)
GoodShop - GOODSEARCH LLC - http://www.GoodSearch.com (2013-09-24)
SiteAdvisor - McAfee - http://www.siteadvisor.com (2015-09-28)
PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2015-07-03)
Flash Player (2016-04-15) [Support]
Flip4Mac WMV (2012-05-15) [Support]
Growl (2015-09-16) [Support]
Java (2016-04-18) [Support]
Norton\nQuickMenu (2010-11-16) [Support]
Trusteer Endpoint Protection (2016-04-18) [Support]
Time Machine not configured!
5% WindowServer
1% kernel_task
0% fontd
0% SymDaemon
Top of page process of memory: ⓘ
445 MB kernel_task
Mdworker (18) 430 MB
164 MB Google Reader
Dropbox 123 MB
VShieldScanner (4) 66 MB
106 MB free RAM
4.15 GB used RAM (770 MB cache)
6 MB used Swap
April 28, 2016, 22:42:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-224212_[redacted].crash
com.etresoft.EtreCheck - /Applications/EtreCheck.app/Contents/MacOS/EtreCheck
28 April 2016, 22:21:42 self-test - spent
April 28, 2016, 19:49:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194912_[redacted].crash
April 28, 2016, 19:47:10 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194710_[redacted].crash
April 28, 2016, 19:38:58 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-193858_[redacted].crash
April 28, 2016, 19:04:58 ~/Library/Logs/DiagnosticReports/rapportd_2016-04-28-190458_[redacted].crash
/Library/rapport/*/rapportd.app/Contents/MacOS/rapportd
April 28, 2016, 06:06:59 /Library/Logs/DiagnosticReports/Safari_2016-04-28-060659_[redacted].hang
/Applications/Safari.app/Contents/MacOS/Safari
April 28, 2016, 12:48:04 AM /Library/Logs/DiagnosticReports/SubmitDiagInfo_2016-04-28-004804_[redacted].cpu _resource.diag [details]
/ System/Library/CoreServices/SubmitDiagInfo
April 27, 2016, 22:01:10 /Library/Logs/DiagnosticReports/Safari_2016-04-27-220110_[redacted].hang
April 27, 2016, 21:57:37 /Library/Logs/DiagnosticReports/Safari_2016-04-27-215737_[redacted].hang
April 27, 2016, 19:05:50 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-27-190550_[redacted].crash
April 27, 2016, 06:57:28 ~/Library/Logs/DiagnosticReports/Airmail 2_2016-04-27-065728_ .crash [deleted]
/ Applications/Airmail 2.app/Contents/MacOS/Airmail 2
26 April 2016, 19:48:11 /Library/Logs/DiagnosticReports/Safari_2016-04-26-194811_[redacted].hang
Remove all apps viruses you have
Symantec, McAfee, Norton...
CleanMyMac3
-
A few questions about the difference between the Satellite P70, L70, S70
Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.
(1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.
(2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?
(3) all the three (P70, L70, S70 series) come with the same TFT panels?
(4) of the above series, which supports mSata?
(5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
(6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?
(7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
Thank you in advance.
> (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.
What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.
(> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD driveI also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available
(> 3) all three (P70, L70, S70 series) come with the same TFT panels?
See point 1). Different P70, L70, S70 models were equipped with different material parts.(> 4) of the series above, which takes in charge mSata?
As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.(> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
See point 4) not all models supports the same hardware specifications(> 6) all of the above, come with a S - ATA II or III S - ATA interface?
I don t think that SATA III is supported. I guess it would be SATA II(> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
Not easy to answer because there are too many models released in Europea.
And not all models are available in each country. So I guess you will have to look for the models that have been released in your country. -
A few questions about the Qosmio F20 upgrade
First of all, my English is not very good!
I want to improve my laptop. I want a new graphics card and a new processor.
My questions are what standard mxm has my cell phone (I have a GO6600)? Where can I buy a new one?
The cpu can be improved? If so what CPU? Can be installed on a dual core?-Does anyone know how the open a Qosmio f20.
I opened all the screws on the site but I can not open it... What should I do I open Notepad?My laptop dvd drive is very strong when I play games... it works all the time and I have made many drowning.
Do you know how to reduce noise?thx for the answers
Hardware upgrade on laptops is not comparable with the workstations where you can upgrade almost everything. Mainly on laptops, you can improve RAM, WLAN, HARD drive or maybe BT but all that s.
Update graphics card is definitely not possible because the graphics card is part of the motherboard. Update CPU's might be possible, but certainly not recommendable. The construction of any material is designed by technicians and configured to provide optimal use. If optimal use, you understand very good performance but without the possibility to destroy the material. The common problem on mobile computing is heat and how to cool the hardware components.
The best graphics card and CPU using the material temperature is much higher and the result can be permanent running fan or just property damage. If you think about all this stuff, I hope you understand that this type of upgrade can be very risky.
If you need to better and more powerful portable computer the best option is to sell your old and buy newer with the best hardware configuration.
-
We can connect the output of the sensor directly to the DAQ hardware or any interface necessary?
We can connect the output of the sensor directly to the DAQ hardware or any interface necessary? If so wat kinda necessary interface?
How to change the sensor output to match entry-level data acquisition?
If the sensor output beyond daq range is provided. What are its effects? pls answer
-It depends on your signal and the type of device you have. Your DAQ provides a package of signals? Also, what type of signal you want to measure? You must select DAQ that matches that. Take a look at the following before you start:
Getting started with NO-DAQmx: Main Page
And take a look at table 1 in the following article to wire your signal to the right:
Wiring and considerations of noise for analog signals
-You will need to use external circuitory to match the input of data acquisition range.
-You could damage the unit.
If you have any other questions, please after return. And, don't forget to give more details about your configuration, the hardware and what you're trying to do.
-
Questions about the function "movie Diff file with...". »
Hello
I started working on a project where I'm now a piece of the old code written by an employee has since left my company. This is a file of sequence TestStand 3.0 calling on Labview 7.0 code. The thing is, there were two of these facilities at different times and, somewhere in the Woods between stations 1 & 2, the code base diverged. Part of it was due to not being able to get the material in double right for the PXI chassis and part was, apparently, due to the fact that the customer has used the 2 machines to test different models of the object to measure.
So, I'm looking for copies of the code installed on both machines using the diff feature in TestStand base. (If that makes a difference, I do this view in TestStand 3.5 since TS3.0 disappeared mysteriously some corrupt on me right now on my main development machine, and if the memories are good, you need to uninstall all the latest version of TS to reinstall an earlier version.) A quite fun process, no doubt, but a little of your time.)
Anyway, the first thing I noticed is that many sequence steps have different values of ID of the step Properties.Step look like this: "ID #: 2vMTp0db002mQDXArddRSA. Play with the diff screen showed an option "Ignore the unique ID of the Step" which got rid of these. With regard to these single-step ID: when they are generated and they remain constant on a particular machine? Beyond simple curiosity, I wonder as an another diff is in some of the "on spending target ' or 'On Custom Condition true target' under certain properties of the step and the value down there looks suspiciously like these unique ID (that is, '" ID #randomstuff' "). Are they all updated dynamically during execution or break something by changing these (for example if I copy a sequence of a crushing in the other version)?
So, I have filtered the unique ID's. The next major area of difference is that many, but not all together, VI Labview calls have a difference in the properties of the step > Flexible Labview adapter properties > ViCall > connector pane Checksum > value. In addition, in some other cases, ViCall > error > connector number is different as well. This indicates a different underlying VI?
There are a few other differences, but I can interpret those. My goal is to get a file of sequence for two machines, so the code will be easier to maintain. I think that some of the VI with different amounts of connector pane control can be different between two facilities from one of the different hardware components required a library different driver. This leads to a third question, what to use identical sequence files when the underlying VI may be different? Is it just the interface must be the same? As the connector pane has the same types of data and geometry for the presentations of the inputs and outputs?
Thanks for any help,
Mike
I just got the phone with the help of NOR, so no worries on the answers.
Short version:
The unique ID is regenerated when a sequence is copied.
TestStand didn't need to uninstall to reinstall an earlier version of the above.
Connector pane Checksum involves a different underlying VI, but having the same geometry/inputs/outputs/types of connectors should allow you to have an another VI of facilities without different sequence files.
Still awaiting support on the question of if the goto pointers updated correctly when a sequence or part of a sequence is copied.
-
Original title: I have a question related to group policy
I have a question related to group policy
We are using server 2003 standard edition and I want to disable the software / hardware installation
users cannot use usb ports, CD/DVD
Download, streaming audio, video, chat games continuous access app
How can I disable these things using GPO Windows Server 2003 Standard Edition
Hello
Welcome to the Microsoft Windows answers Forum!
Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.
http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads
-
As I understand it, all hardware is emulated (that is, it 'sees' that which is emulated, not the physical hardware in my computer: sound card, motherboard, etc.), correct? Here's my question: do I need to install the motherboard drivers, video drivers, or the audio drivers for the emulated stuff. In other words, even if I have an Athlon XP 3000 + processor on an ASUS motherboard, do I need to install the drivers from the motherboard with the chipset emulated by Virtual PC?
You have no need track down all the drivers. They are installed automatically.
-
The list of units in the Add Hardware Wizard is blank
I'm trying to install Microsoft Loopback, but I'm having problems. When I use the Wizard add-on (inheritance) and choose 'Add hardware manually', then the NIC, I'm supposed to get a list of all available maps. But this list is just empty. Why?
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.
Here is the link:
http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads -
I have a question wth the missing icon for the touchpad of Dell.
Original title: what happened to my Dell Touchpad icon under mouse properties
Normally, when I wanted to turn off/turn on my Dell Touchpad, I'm going to start, Control Panel, hardware, mouse and he was there with a big Ole icon to click to turn off. It is causing me so many problems when I type and I use the keyboard, ever the touchpad. However, it is a computer lent, I am and I need to know what happened. The driver for the Touchpad is present under programs and it is up to date but that dag gum icon is no where.
I run for the Dell Touchpad and it can not find it anywhere. Anyone know what happened or how I can get this icon back where the Touchpad can be disabled/enabled?
Any help will be appreciated. Thank you and have a wonderful day. (I use Win 7 with IE10).
Joy
Hello
Thanks for posting your question in the Microsoft Community.
The description of the problem, you want to know how to disable the Touchpad. I'll be happy to help you on this question.
What is the model number of the computer?
I suggest you try the following steps to disable or enable the touchpad by using shortcut keys.
Disable or enable the touchpad by using the access key
http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=424135See also the link: Mouse, touchpad and keyboard with Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-WindowsGet back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
-
Activation of Windows still necessary even if the virtual server on the same hardware to restore
Hello, I hope someone can answer this.
Our virtual machine running vmware server ESX 3i 3.5.0 has 2 hard drives, datastore1 and datastore2. All of our virtual servers are stored in datastore2. Our hard disk with the datastore2 crashed and he had to be replaced. We have backups of our virtual servers in datastore2 virtual appliance.
To solve the problem, we replaced the hard drive crashed and then restored by using the virtual appliance backups, once restored, we noticed that the Windows 2008 requires that the activation of the licenses.
My question is why does windows need activation when we restored the virtual server for the same hardware? The only thing that has changed is the hard drive.
Thanks for any help on this issue.
Export/import unfortunately OVFs does not have an option (at least I'm not aware) to maintain these settings. What you can do - when exporting the virtual machine as an OVF - also download the machine virtual . VMX and .vmxf files. After re - import the OVF, remove it the ESXi host inventory, download the two * .vmx files and add the virtual machine to inventory. -Once asked if you copied or moved the VM on the first power-select "I moved it.
André
-
Questions about the upgrade from 4.1 to 5.1
I posted the following to the thread in the forum of Vsphere upgrade, and in five days I got ZERO responses. Perhaps more here and even here is the wrong place to post things, or maybe I'm not questions easily answer. I'll post it here too, since it mainly Virtual Center, I think. Maybe someone can help me or tell me what is the problem with my announcement that allows to go unanswered. Here we go:
I'm about to upgrade my little (1 4 host ESX and Virtual Center) environment vSphere 4.1 and 5.1. My database to the virtual Center lives on a separate SQL server 2008R2 server. My virtual Center Server is virtual, if that matters. I have upgraded my licenses and read the documentation, to try to formulate a plan that escapes enough causing any downtime for my virtual machines.
I am designing a series of steps that are all pretty low, and such that each step does not harm anything, whereas if I have problems, I can take my time to solve. Then, when this step is stable, I can continue to the next step. I want to tell you what I have in mind, ask a question here and there and hope you can report errors that I make and answer my questions. The big picture is:
1 Virtual Center update and give him a few days to show me any problem before doing anything else.
2. upgrade to a host ESX 4.1 5.1 ESXi. Convince me things are okay, before you do more.
3. put to level the other three 4.1 ESX hosts. Make sure that everything is fine.
4 create new LUNS, formatted with the new VMFS, move my VM to them and remove the old one.
If there is nothing wrong with this basic plan, please let me know.
More details and questions:
Question: The docs say my Virtual Center Server, under the SSO, the inventory service and the virtual Center Server, will need TEN GIGABYTES of RAM. Is this true? It seems insane to me.
Question: Can I install on my Virtual Server 4.1 single signon Center without DANGER? In other words, its installation will prevent Server 4.1 virtual work center? I hope I can, because it is a new feature that I have trouble with. I don't want to get into a situation where my old virtual server Center does not work, and I can't get the new work.
Question: The VI 4.1 client can talk to Virtual Center 5.1? The VI Client 5.1 can talk to Virtual Center 4.1? I hope that the answer to one of the people is 'yes '.
Step 1: Create a backup of my virtual Center VM (with vRanger connection, if this is important) and a backup of my SQL database.
Step 2: Install single Signon. Here is where I hope that this does not stop 4.1 virtual work center.
Step 3: Upgrade the inventory Service and Virtual Center to 5.1
Step 4: Install VI Client 5.1 on the VM virtual Center and on my desk from which I usually manage my environment.
Step 5: Wait I'm comfortable that everything is fine. It is perhaps a day or two (or more).
Question: How can I spend my hosts for maximum security? I'd rather put a DVD in the drive and do it from the console, unless this is not a good way.
Question: Before I update a host, should I remove the fiber channel cables, so he can't see my VMFS LUNS? I think I read that somewhere, and it sounds like a good thing to do, even if I do not have.
Step 6: Upgrade a host ESX 4.1 5.1 ESXi. Move a couple of virtual machines essential to it and he give a day or two to settle.
Step 7: Upgrade the other three ESX host.
Step 8: Wait until I'm really, really comfortable with things.
Step 9: Create a new LUN VMFS5, migrate my VMs to them over time and remove the old one.
I would greatly appreciate all advice and attention that you may have.
Question: The docs say my Virtual Center Server, under the SSO, the inventory service and the virtual Center Server, will need TEN GIGABYTES of RAM. Is this true? It seems insane to me.
If your environment is small you can run all these in one and ofcouse if you execute all these in a server you need more RAM... There is no limit.
Question: Can I install on my Virtual Server 4.1 single signon Center without DANGER? In other words, its installation will prevent Server 4.1 virtual work center? I hope I can, because it is a new feature that I have trouble with. I don't want to get into a situation where my old virtual server Center does not work, and I can't get the new work.
normally if you think only in terms of scalability, it is good to have separate these things... He is sure no questions evey thing won't work if you install it on the same server also.
Question: The VI 4.1 client can talk to Virtual Center 5.1? The VI Client 5.1 can talk to Virtual Center 4.1? I hope that the answer to one of the people is 'yes '.
The VI 4.1 client can talk to Virtual Center 5.1? No, but talk about Client 5.1 Virtual Center 4.1
Step 1: Create a backup of my virtual Center VM (with vRanger connection, if this is important) and a backup of my SQL database.
Step 2: Install single Signon. Here is where I hope that this does not stop 4.1 virtual work center.
Step 3: Upgrade the inventory Service and Virtual Center to 5.1
Step 4: Install VI Client 5.1 on the VM virtual Center and on my desk from which I usually manage my environment.
Step 5: Wait I'm comfortable that everything is fine. It is perhaps a day or two (or more).
these steps are ok
Question: How can I spend my hosts for maximum security? I'd rather put a DVD in the drive and do it from the console, unless this is not a good way.
BLI, or DRAC suites method what ever you... very well.
Question: Before I update a host, should I remove the fiber channel cables, so he can't see my VMFS LUNS? I think I read that somewhere, and it sounds like a good thing to do, even if I do not have.
Installing esxi will not hurt of thing... to the old VMFS... It will ask to keep or to format the old vMFS... BUT I prefer to remove the cables... BECAUSE we are humans...
Step 6: Upgrade a host ESX 4.1 5.1 ESXi. Move a couple of virtual machines essential to it and he give a day or two to settle.
no need... . If the hardware is on the HCL, I mean the firmware/driver etc... for the esx is on the HCL, then no problem...
Step 7: Upgrade the other three ESX host.
Step 8: Wait until I'm really, really comfortable with things.
Step 9: Create a new LUN VMFS5, migrate my VMs to them over time and remove the old one.
assign the new LUN and create VMFS and migrate... It'S her!
-
DELL PE R710 missing sensors on the tab 'Hardware status' vCenter ESX after latest patch update!
Last month, I update all my ESX host with the latest patches for ESX from 28/04/2011 (ESX410-201104001) via the vCenter Update Manager, earlier this month, accidentally, I have some verification to be done in the server room and noticed a hard drive failure on one of my DELL R710 Rack servers, I you connected the VirtualCenter client and when I click on the tab 'Hardware status' (where the alarms about the) Configuration hardware server usually appear), I noticed that my storage sensors are missing, the network sensors as well! ?? I recall that on March I did have another server hard disk failure, but I saw an alarm (for predictive failure) on my vCenter and I call Dell to replace the drive back!
I also noticed that now the number of my server sensors are between 73 and 88, before I remember although there were a couple hudred of them! ??
After some research on the net, I did I frimware/BIOS upgrade of all hardware on the servers, as I install OMSA 6.5 and Dell management plug-in to vCenter and all seems to work just fine, but storage sensors and count sensor under the tab 'Hardware status' issue was not resolved. I think there is a problem with vcenter, because when I connect directly to the host through the vsphere client, in the "State of health" tab all the material appears correctly. I found subjects with similar problems, but they have been with HP servers and not answered or solved!
Is there anyone with similar problem or no answer to my question?
Thanks to all in advance!
godjak
PSIF there need I can post some screenshots!
Confirmed. Without patch ESX410-201104401-SG, my other R710 has a full complement of sensors.
-
Question about the interruptions and priming
Hello
I had a few questions about the startup and interruptions in a virtualized environment
Assuming that, plenty of virtualization (no material assistance to virtualization of memory ).
1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the initialization of the different process, as I understand it takes BIOS-> Expansion ROM - > BIOS-MBR-> other record secondary-> VMM-> OS--> applications >. Am I right on that?
2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?
Thanks in advance
-SC
sidc7 wrote:
1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the different boot process, if I understand correctly to -> BIOS-> Expansion ROM BIOS-> MBR-> other documents-->--> OS--> requests VMM. Am I right on that?
It is simplistic but essentially correct. A metaphor would be a little better thinking that the hypervisor/vmm is an operating system, except that the process on this operating system are requests or comments OSes. If the BIOS-> OPROM-> BIOS-> MBR-> hypervisor-> init process of the hypervisor-> reviews of fork () s operating systems. This can become blurred by the design choices (for example Xen/Hyper-V init start a coded parent hard partition that makes hypercalls privileged to fork() guest OSes; ESXi init runs a very limited subset of applications directly on the hypervisor and ESX Classic is somewhere between these approaches).
There is a subtle distinction between "hypervisor" and "www." The "hypervisor" is the operating system of single root (e.g. ESX) who interacts directly with the hardware and has access to everything; a hypervisor is not to be used to run virtual machines. When we talk about a "hypervisor", the tendency is to describe something which is a BONE (although usually a minimal OS designed only to run virtual machines). The "www" is the layer that allows a virtual machine run: it provides the interposition, virtualization and emulation services and can be plural (for example a vmm by guest operating system). Architecture of VMware deal with these two separate components, while most other virtualization platforms merge the two.
sidc7 wrote:
2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?
Strictly speaking, the interruption is not transmitted to a guest operating system - receives the hypervisor (or rather the VMM it transmits to the hypervisor), the hypervisor drivers interpret the interruption (for example reading package of NIC, I/O process of HBA, the timer tick completion), then after a new appropriate break in the guest OS.
Maybe you are looking for
-
How to re-enable the prompt confirmation shift + delete?
I don't like play with trash / recycling bins and have always used the shift + del for everything in Windows and other programs that support it. This includes Thunderbird. I think that I recently accidentally ticked the box 'don't show this again' on
-
Search bar in the 29 update does not
When updating firefox 28-29 the bar no more research work. It is empty.
-
HP PUSB thermal Printe of reception: XP drivers for HP PUSB thermal receipt printer
Hello May I kindly ask where can I find Windows XP drivers for the printer to thermal receipt HP PUSB (FK224AA) that I can't locate in the center of Support of HP. Thank you very much Ryan
-
OfficeJet pro k8600: why my printer print after each letter printing
Why my printer print after each print format appromitate letter of 30mm at the top of page new Board every time. N N N N N N N
-
Upgrade RAM problem new Alienware 15, 4 no beeps no boot.
So, I just bought a new alienware 15 and I've had good compatible ram for an upgrade, according to dell recommended ram for this computer. He also worked in my previous alienware 14. I took the stock of ram (2 x 4 GB @1600 mhz) and set (2x8GB @ 186