A satellite does not even using the new adapter

Similar Questions

• Select CTRL or copy, does not work - using the new Windows 7-

  Using the new Windows 7, it still does not work:

  > To select the non-consecutive files or folders, press in and hold the Ctrl key and then click each item you want to select.

  There is also the same problem when you use the Ctrl key to 'Copy', rather than 'move '.

  Sometimes a reboot will fix it, but other times not. Is it an appropriate solution for the Ctrl key work properly?

  Hello

  It is difficult to imagine a particular key for only certain combinations of keys does not?

  Here are a few troubleshooting steps that you can try to isolate if all goes well the problem.

  1. start the computer Safe Mode and try to reproduce the problem. Start your computer in Safe Mode

  2. perform a clean boot, and then follow the instructions in the following article to help identify the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  3. create a new user account, log in to the new account and test the issue. Create a user account

  If this step resolves the issue, is that your user account may be damaged. Replace

  your original user account.  How to fix a corrupted user profile.

  Let us know the results.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• L855-135 satellite display brightness does not work using the new ATI driver

  Hello

  I just bought the L855-135 with a Radeon HD 7670 M and wanted to update the graphic with map
  the last driver AMD. After that, I realized that the brightness setting didn t work anmore. So I uninstalled
  the new driver and installed again the old driver from this site. Now, the brightness setting works fine again but I Don t really want to get stuck on this older version of the driver. Its around the age of 8 months. Before I bought my laptop I've never heard their update policity. Can someone tell me when they intend to update their-own-amd-drivers toshiba? I really want some new drivers but I Don t want to lose the ability to adjust the brightness. For me, it's a reason to give the laptop back, but I like really this laptop with the exception of its own pilots.

  Can someone tell me how long it will take to get a few new drivers? And I mean not more recent that the 'old' but still 6 months of NEW drivers.

  Thank you.

  > After I realized that the didn t of brightness adjustment works more. So I uninstalled the new driver and installed the old driver from this site again. Now, the brightness setting works fine again but I Don t really want to get stuck on this older version of the driver.

  I found another thread on the same topic.
  It seems that the command buttons FN brightness don t work using the NON-Toshiba graphics card driver.

  You know this Toshiba page graphics card driver is a driver updated, created and configured especially for models of Toshiba laptops.
  This driver supports protection against overheating. Other drivers don t

  However, it seems that there is no other solution than to use the Toshiba configured and modified drivers.

• Satellite P205: Touchpad does not work when the new adapter is connected

  I got a replacement charger for my Satellite P205 but put it has A 4.19 instead of 3. 95 has, they said that it didn't matter, but since I use the charger, I have the following problems:

  -Does not load properly and turns off after an hour.
  -The touchpad has a mind of its own when the charger is connected (windows opens if hovering over button, through the screan jumps when I try to move it, freezes and disappears)
  -Charger Word to say the laptop plugged in but not charging

  What can I do to remedy these problems, the laptop works perfectly when the charger is not plugged in?

  See you soon!

  Hello

  I guess that the touchpad worked correctly in the past with the former sector adapter.
  Is this good?

  Well, it seems that these questions are related to the new power adapter and I would recommend using a 100% compatible adapter.

  Check the AC adapter s old part number and if the issues could be resolved using this adapter.

• Tecra Z50-A-180 does not start using the new SSD OCZ Vertex 460

  Hello

  I bought an SSD OCZ Vertex 460 for Tecra Z50-A-180 but the system only started only not with this device.

  BIOS detect SSD but not find any system start-up.

  I cloned the old SSD HARD drive, but the system does not boot with SSD.

  I installed the firmware 1.03 on OCZ.

  I await response.

  Thank you to

  What program did you use to clone?
  Maybe it's not compatible with the version of Windows.

  If you load a new copy of Windows or Ubuntu on the SSD can it start?

• C870-19(r) satellite does not start with the new SSD

  Hello

  I will update the Toshiba Satellite C870 19(r) with a Pro 840 Samsung SSD, but it does not start.

  He said: not found system.

  Post edited by: joch333n

  None found system means that there is no system installed on the SSD drive...

  What you trying to do?
  You start from a disk in order to install the new system?

  In this case, you should disable startup secure in the BIOS.
  I also recommend moving from UEFI mode MSC!

• C55-A-1MW satellite does not start with the new RAM inserted

  Hey.

  I hope to find someone who can help me... I bought ram memories and tried 4 different memories in my C55 A 1MW Satellite. But each card RAM I have insert makes the computer cannot start... It lights just to stop again.

  Is there a compatibility issue or anything like that? I used 2 different aData Ram extensions cars, 1 1 and 4 GB 2 GB. the 4 GB card was 1333 mhz and was 2 GB 1600 mhz card. and I tried 2 corsair 4 GB 1600 mhz different cards.

  Is this something that makes only able to expand RAM with Toshibas own memories or is the second cardslot for broken RAM memory?

  As I see you use RAM modules with different specifications. Your problem is certainly of RAM compatibility and you must use the RAM modules with the same specifications.
  According to specification of laptop there are 4 slots of memory and laptop can handle up to 32 GB of RAM.

  The compatible RAM modules are:
  4 GB DDR3L-1600-PA5104U-1M4G
  8 GB DDR3L-1600-PA5104U-1M8G

  Of course, you can use modules from other manufacturers, but please do not use some cheap products. I can recommend the use of Kingston memory modules.

• I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd

  I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom

  The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?

  http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
  Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.

  http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!

• The license we use for an old PC no longer valid for the new PC - uninstall of the old PC and still does not work on the new PC

  Hello

  The license we use for an old PC no longer valid for the new PC - uninstall of the old PC and still does not work on the new PC

  A disable the old installation before you uninstalled?  If this isn't the case, then it is always considered as enabled, which could mean that you have all your activations in use.  You can contact the Adobe Support via chat and ask them to reset your activations.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

  If none of this helps can you identify which software it comes and what error messages you get when you try to run on the new machine?

• Acorn TV does not work on the new Apple TV

  So disappointed that the Acorn TV app does not work with the new Apple TV we just bought. We have subscribed on iTunes and nothing happens when you try to activate the software. We can look good on the MacBook, iPad and iPhone. Verified the purchase on iTunes account and that's fine. Contact Acorn and say it is a matter of Apple.

  Strange that I have to use Chrome to even write this question. Safari and hers do not work with the Support pages. I'll send in the comments.

  I'm resetting Apple TV now. We have been with the Apple TV since version 1. I hope that we can make this work!

  How would work appletv mount 1 app on the job?

  each app to live their own lives the appletv core do not even know what applications do they just

  Use the ios network to get their content

• C50-A-19 t satellite does not start with the battery mounted

  OK, first post here.

  I see similar questions coming, but as they are never QUITE the same, I am that posing in a new thread.

  I left my Satellite from one day to the next (do not remember if I had put off, or he simply had 'gone to sleep', but it has been connected to the grid).

  When I got to reboot, I got a power light on, but screen blank (black). After reading a few similar complaints on the internet (via another laptop!), I tried to remove the battery and power from the grid.
  This worked well (I write him in this state right now).

  But whenever I put the battery and try again, it will fail in the same way.
  I tried this company "press and hold power for 30 seconds" without success (but I'm not 100% sure of the EXACT procedure actions sequence).

  I have a few questions:

  (1) I take the laptop away from my office - is there a problem with everything just works like this (i.e. of the grid, with no battery inserted) indefinitely?

  (2) in any case, I want to solve the problem.
  If the battery has run COMPLETELY flat, and that the laptop can not it lights but also operate normally?

  Alternatively, is probably that the battery has not experienced a catastrophic failure and simply needs to replace?
  If so, I'll just buy a. BUT...

  What I don't want to do, is to pay for a costly spare battery, to find that it was actually another factor at the origin of the problem, and I'm back to square one and out of Pocket!

  Any advice would be welcome.

  Thank you

  Mike

  Hello

  According to your assignment, in most cases, you use the laptop connected to the power adapter but no battery. Is this correct?

  First we need to know that if the AC adapter is plugged in, the laptop should work correctly with - and without inserting the battery.
  If you unplug the AC adapter, the laptop should automatically switch to battery power. In this case, it is important that the battery is pretty cool power to provide the power for the laptop.
  In case the battery is empty, the laptop will not light.

  I recommend to insert the battery plug the power adapter and charge the battery for a longer period of time.

  You should also check if the battery is recognized by the Windows system and the battery charge indicator (battery in the taskbar icon) shows the State of battery charge.

  In case the battery is fully charged and the laptop does not work using the battery power only, you should test the new battery.
  If new battery does not solve the problem, s for laptop hardware needs an audit.

• My Lenovo ThinkPad(red scroll) scroll function does not work in the new Firefox 4. It worked very well at point 3.6. Can you please fix this because it is a very important feature.

  (Middle button) scroll feature does not work on the new firefox 4. For this reason, so I need to move the scroll bar to move the page. It's very irritating problem, if you are a guy who uses the middle button to scroll. Can you if you please fix this...

  Thank you!!!

  I've updated to Firefox 4.01 today and the Center knob on my Lenovo T400 does more. I downloaded the updated Ultranav utility and the Ultranav driver for my T400 by http://www-307.ibm.com/pc/support/site.wss/MIGR-72858.html , then uninstalled the 'Thinkpad Ultranav Driver' to add/remove programs, rebooted and then installed the update utility and driver (another reboot) and now it works perfectly.

  So happy to get it working again.

• HP laserjet p1102w: wireless printer does not work with the new wireless network

  My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

  Hi Shlomi,
  Thanks a lot for the info. I'll give it a try today...

• Satellite M100 does not illuminate unless the AC adapter is pluged

  I am also having the same problem with my Satellite M100. The computer does not illuminate unless the AC adapter is pluged and plugged into the power outlet.

  Any ideas on how to solve this problem? The battery should be fine.

  B.

  Hello

  Well, to me it sounds like a battery problem
  Why you say that the battery must be good?
  Have you checked it or because the technician?

  In most cases if the battery is faulty then the laptop would have no power until it would be connected to the power adapter.

  So I think (but that's just my personal opinion) the battery must be enabled (by technician, ASP) and if necessary should be replaced.

  See you soon

• IR remote control does not work with the new imac

  IR remote control does not work with the new iMac. From 24 "2007 machine to last 27"

  Correct, because Apple no longer includes the IR sensor in newer models