A series of satellite is not recognize USB HDD

Similar Questions

• SeaGate for Windows tools do not recognize USB HDD

  SeaTools for Windows does not recognize the attached USB what Maxtor 3100 HDD. I have no problem to access this drive F: using Windows 7 and Windows 7 create system image backup. SeaTools recognizes my attached SATA internal HARD drive C: and I can run tests on the C: drive, but I got some errors. I want to run the same tests on my external HARD drive.

  Here are taken disks supported documentation of SeaTools.

  "SeaTools for Windows is a comprehensive, easy to use diagnostic tool that allows you to quickly determine the status of the hard disk in your computer hard external drive, desktop or laptop. It includes several tests that will examine the physical media on your drive hard Seagate, Maxtor or Samsung any other hard disk. SeaTools for Windows needs to run on internal and external hard drives. »

  Any suggestions would be welcome.

  You can try all sorts of things.  My years of experience tells me you're not going to succeed.

  My advice is to stop all of this and just do a clean install.  It is the one sure way to be certain that you will have a system that works like new.  The process is not really difficult.  It just takes time.

  Note: I don't know if my advice earlier everything that makes the image after the new facility will be of any value on an SSD.

• Qosmio F30 does not recognize USB devices

  My new Qosmio F30 does not recognize USB devices. Displays Device Manager USB ENHANCED CONTROLLER and ROOT HUB works fine, but the machine still wants to install each device but cannot. BIOS version seems to be V1.30. I tried the devices on other machines, and they work fine.
  Is there something that I missed?

  Hello

  Before your shot the beautiful F30 can you please say what OS you are using?
  Did you use the OS from the Toshiba restore CD?
  On this CD, all drivers must be preinstalled and you don t need to install no matter what chipsets or anything like that.

• File Manager XP PRO SP3 will not recognize USB floppy A: drive

  File Manager XP PRO SP3 will not recognize USB floppy A: drive

  The system tray alerts "new hardware found" and "installed".

  In the system. material | Device Manager | floppy drives, the disk is present, activated and works

  If I pay BACK the drive is located and can be read and written.

  The drive is not the case in (windows explorerer file manager.

  The drive is not present in administrative tools. computer management | storage | removalable storage | libraries.

  In the removable storage service is started.

  If bottom line, the usb floppy is a material recognized, works under DOS, but there is no access to XP.

  This happens with two floppies different usb connected directly to a laptop (not a hub). When connecting to another XP computer, the disks are immediately recognized in the file manager and work as expected.

  Any ideas?

  It's embarrassing, BUT I solved the problem by using TweakIU. It seems that in the workstation. The floppy drives were not verified. Verification of A & B readers did the trick.

• WMP11 does not recognize USB drives

  I have 2 laptops, the two Vista running. Both have WMP 11. We recognize USB drives in WMP11 and allows playlist to copy to them. The other laptop recognize USB drives (I have a variety of brands and sizes) in Win Explorer, will play the music of their share in WMP11 but will not recognize USB keys for use with copy of the lists of reading or synchronization. Sync, refresh devices does not help. Same result if USB is directly connect to the laptop or connected via USB multi hub. USB key works perfectly in all other respects, but WMP11 is unable to locate one of them.

  Hi MarcGG,

  ·        At the devices detected before?

  ·        Do you remember the last changes before the show?

  1. check if the sync settings are correct. To do this, follow these steps.

  a. open Windows Media Player.

  b. click the arrow below the Sync tab, point to the device and then click Advanced Options.

  c. the Properties dialog box for your device is displayed. Tab sync, box start sync when device connects checkbox.

  d. restart the media player.

  e. the next time you want to sync, connect the device to your computer, click the Sync tab, and then click Start synchronization.

  For more information, please see the link below: set up a device to sync in Windows Media Player:http://windows.microsoft.com/en-US/windows-vista/Set-up-a-device-to-sync-in-Windows-Media-Player

  2. Add a device to sync in Windows Media Player.

  a. start Windows Media Player and connect your portable device into a USB port on your computer. A box of "Windows Media Player ‑‑ Device Setup" appears, showing that he recognized the device and provides an opportunity for you to name your device.

  (b) read how the player will sync your device, which is directly under where you type the name of the device. If storage of the device is more than 4 gigabytes, for example, and your library on Windows Media Player fits on this device, the player chooses automatic.

  c. selection of automatic syncing means that your device will reflect all your Windows Media Player library and it will do so that whenever it is connected. Click on "Finish".

  d. to synchronize only some of your library when the player chose automatic, you can choose what will sync when you open Windows Media Player. Click on the portable device in the right pane and drag the items you want to synchronize with this device.

  e. selection of a manual synchronization indicates that the player has detected that the portable device has no place for your entire library. Click on "Finish". Open Windows Media Player, select the portable device in the right pane and drag the items you want to synchronize with this device.

  For more information on "Windows Media Player sync: frequently asked questions" visit this link:http://windows.microsoft.com/en-us/windows-vista/Windows-Media-Player-Sync-frequently-asked-questions

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• first instance LR 6 cc import goes well with the various cards, that one card does not work, usb HDD with only images, map 9571 photos 115GB, sometimes only 300 photos, then wait all night nothing, try the separate subfolders, only two (including su subfo

  trial LR 6 cc import goes well with different cards, that one card does not work, usb HDD with only images, map 9571 115GB, sometimes only 300 photos pics, then wait all night nothing, try separate subfolders, only two subfoldrs(including subfolder) done well, 175, and 125 peaks, other subfolders doesnot work, opendLR as administrator : no difference. I7 import about 60-70%. on the import of only about 300 visible pictures, the other empty square. solution?

  Hi willemm,

  first instance LR 6 cc import goes well with different cards, that one card does not work.

  Could you please develop the issue you are facing?

  What is the image format you import?

  USB HARD drive with only images, card 9571 115GB, sometimes only 300 photos pics

  I would not recommend to import gb 115 library at once.

  Kind regards

  Assani

• Satellite L50 - B suddenly does not recognize USB devices

  Suddenly my laptop does not recognize any USB.

  The USB key or external hard drive works on other computers, but not on my laptop.
  Only cards SD-are recognized.

  I tried to remove the usb portals on the Control Panel, but after I restarted my computer all returned.
  One reappear with a caveat that it does not work, but when I search a new program to run it, it can not be found. After removing it, it comes back with the same caveat.

  I also tried to download the new discs (chip set utility) but who doesn't either.
  I don't know what else to do.

  Can someone help me if I can access my USB-products once again on my laptop?

  Hello

  What about the USB mouse? You can use the USB mouse connected to one of the USB ports?

  Have you changed the system or you have installed new OS on this laptop?
  I m asking because the L50 - B Satellite supports USB 2.0 as well USB 3.0 ports

  In the case where you have installed the new OS (Win 7?) on this laptop, the USB 3.0 ports would require additional USB 3.0 driver

  However, in case that you are always using the OS preinstalled Toshiba, I recommend you to reset the initial setup and test the USB ports once more.

• Satellite A30: Does not recognize USB devices.

  My computer does not recognize any devices when connected to the USB Port on my Satellite A30. After downloading SP2, I was able to install the printer, but I can't use it because there is no printer icon in the toolbar. If I want to print something I get the window of the printer, select printing, then it goes to the author of the Image of MS Office. Basically, I can't use my printer or any other device connected to a USB port.

  However, it was working perfectly fine when I had the home edition of XP but I can not reinstall this one because there is something wrong with the recovery disk that's why I had to install XP Pro.
  Also, I used to get a sound, letting me know that a device has been connected. I get more or the icon in the toolbar.

  Is that what I could do to fix this please? Is it possible to get another disc of recovery somehow? Obviously, it's something to do with XP Pro software, but I don't know what to do.
  Could you please help me?

  Thank you!

  Hello

  If you get a window of the printer you need to select the right printer. If printing goes to MS Office Image writer so the right printer is not selected.

  On the new installation: If you install the operating system from the original Windows CD you must install the necessary drivers and QFE patches all in the right order.

  USB port: I found a useful paper on this topic:
  http://support.Microsoft.com/kb/873169/en-us/

  Good bye

• L50-B-11J satellite does not recognize the HARD drive connected by USB 3.0

  Hello

  I recently bought a new laptop and install a new legal copy of windows pro 8.1.

  The problem that arises is actually a USB 3.0 port.
  Also, I have a drive external hard support standard USB 2.0 and 3.0.

  When I plug-in the hard drive into a USB 2.0 or any USB 3.0 port (two port supports USB 3.0 is disabled in the BIOS) fine, hard drive is recognized and I can access.

  But, when I plug-in the hard disk into a USB 3.0 port (two port supports USB 3.0 is active in the BIOS) Windows does not recognize it and I can't access it.

  The hard disk led flashes, so it has the power, but does not appear in the devices or Device Manager.
  My opinion is that the problem may be with the drivers for USB, but Toshiba is supported for driver for USB 3.0 for Windows 8.1.

  Then can someone suggest me what to do?

  Laptop: Satellite L50-B-11J
  USB ports: 1xUSB 2.0 port, 2xUSB 3.0 port
  Operating system: Windows Pro 8.1
  USB 3.0 driver: Intel (r) USB 3.0 eXtensible Host Control - 0100 (Microsoft)
  External hard drive: support USB 2.0 and USB 3.0 standard

  Intel USB 3.0 driver is part of the 8.1 Windows System... This is not supplied by Toshiba.

  Windows 7 contains no such USB 3.0 driver and so you can download driver Intel USB 3.0 page of the Toshiba driver as well as the Intel download site.

  By the way: try to disable the functionality of sleep & Charge and check how the HARD drive would work.

• Statellite M100 does not recognize USB storage devices or SD card

  I had problems with my laptop Toshiba Satellite M100 series read don't not Sandisk SD card in the camera to my son - is a 2 GB card and what I read online, maybe that is the problem BUT the laptop is also not reading any of my devices USB "stick". When I insert the SD card or a USB 'stick' he asks me to install the driver software that is simply stupid. I tried to connect the camera via a usb cable too and it does not recognize the device and still once, claims the driver software device.

  I looked on the toshiba site and have installed all updates that I thought may be justified, I'm also trying to run Windows update (at least every 2nd week anyway so it shouldn't be a problem). I am running Vista Home Edition (32 bit). The USB ports have certainly worked in the past, I don't really want to resort to execution of recovery discs if I have as I don't want to lose all the stuff I've stored.

  Question of the SD Card/USB seems to be a common one, but I can't find a specific patch to this topic or any other tech site, any suggestions?

  See you soon

  In your case, I would do two things.

  First: Check if a new BIOS is available. Search on the Toshiba site and do an update.

  Second: Reinstall the laptop with the recovery discs. I know that you will lose all the data, but you can save it to s DVD or external HARD drive.

• C50-B-15Z satellite does not recognize discs when inserted

  Toshiba Satellite C50-B-15Z
  Hello! Pls my Satellite C50-B-15Z newly purchased does not recognize discs when inserted. It dosent play any CD or DVD drive, or it even recognize it at all. Pls help... What should I do?

  Original Win8.1 is installed on your machine?
  Have you tested the feature with different CD and DVD, DVD (original)?

• Windows Media Player does not recognize usb devices

  My Windows Media Player has stopped connecting to my usb key, so I can't sync. my music any longer. Computer recognizes the usb, but not WMP

  Hey Joe,

  Maybe rebuild the database of Windows Media Player could solve the problem.

  Here is a link where similar problem is resolved by disabling the database corrupt:

  Please refer to the suggestions that are marked as answer.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/WMP-doesn

  You can even try to reboot/turn ON the "Portable Device Enumerator Service":

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Player-12-does-not-recognize-removable-media/69a1be0e-9451-42b8-88b6-a69f0b324456

  Let us know the results.

• Computer will not recognize USB printers

  Original title: no USB connection recognized computer to the printer

  I use windows 7 64-bit. I use a HP Deskjet 2050 for 3 years... all of a sudden he says computer is not connected to the printer. I uninstalled and reinstalled the printer drivers, still nothing. I bought a new printer and the computer still does not recognize a USB connection of the computer to the printer (HP Officejet 2620).

  Michelle,

  Thank you for keeping us posted.

  I'd like you to try this article-

  http://support.Microsoft.com/kb/2654149/en-us

  Please let us know if that helps.

• iMac restart and does not recognize usb-keyboard... freezes black screen with white bar tape

  Does anyone know this problem?... reboot does not work, usb keyboard does not work and the screen freezes...

  

  What version of Mac OS X is installed on the computer?

• Ports of USB 3.0 EliteBook 8470p not recognize USB 3.0 devices

  USB 3.0 ports 8470p EliteBook located on the left side of the PC (near the ms in) is not recognizing the USB 3.0 devices.

  Operating system is Windows XP Professional SP3 and the BIOS has been updated to the most recent available on HP website.

  Any suggestions please?

  Thank you.

  It just occurred to me that I had missed a vital part of your first message, the words:

  OS is XP pro.

  XP pro can't stand NOT the USB 3.0