ac1200 adapter not to hit speeds
Hello. I have the Linksys Dual - Band Wireless USB 3.0 adapter AC1200 (WUSB6300) connected to my pc. My wireless router is AC1600. My speed is showing 348Mbps 5, but according to the specifications, that I should be in 867 and the speed, I am currently is more what is the 2.4 ghz. Any info is appreciated.
Thank you very much.
5th = 5 GHz
Tags: Linksys Adapters
Similar Questions
-
I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work
What do you mean, your message is not clear.
-
They are in the question. I was very happy with the old download box, I have a mac, so when I got the new update of firefox, I was very surprised to see I cannot look through old downloads and can not see the speed in which the file is downloaded, it is not sensible cut options off...
Note that Firefox 20 can also open the topic: downloads page in a tab (see also about: on).
You can set the Boolean pref browser.download.useToolkitUI true on the topic: config page to restore the old Download Manager window.
-
Lenovo Y460p: Adapter not found Wifi even reinstalled the dirver
Question:
1 Wifi adapter not found in Device Manager.
2. press "Fn + F5" not shows the Wifi settings
Action taken:
1 rebooted system.
2 reinstalled wifi adapter
The two steps to solve the problem.
Is - this hardware problem?, how confirm?
What is the wifi card to origin came with the laptop?
Try to take the wifi card, restart the system, then stop, reinsert the wireless card, then restart your computer.
-
I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver
See the following article:
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932520Make sure your network connection is working and properly configured.
You can try to uninstall and reinstall the Microsoft ISATAP adapters using the following steps:
In Device Manager, this adapter under network adapters and are hidden so you need to click the view menu, "Show hidden devices".
1. in the Device Manager, right click on the element of Microsoft ISATAP adapter #4 and choose uninstall.
2. in Device Manager, click on the "Actions" menu and select "Add legacy hardware.
3. click Next, then select "Install the hardware that I manually select from the list (user)", click Next.
4. Select "Network adapters" under common hardware types, and then click Next.
5. Select "Microsoft" to the title of manufacturer and "Microsoft ISATAP Adapter" in the title of the network card.
6. click Next and follow the remaining instructions. -
Clean install. 2 problems. 1. no installed audio device? 2 Ethernet adapter not found. Yes router does not. Planet WNRT - 617G
Probably you run first win7 Upgrade Advisor, who did you would probably show your system as not supported under win7
-
Adapter not in the registry State
I had problems connecting my laptop the wireless network usually get the message "no or limited connectivity.
When you try to analyze the issue by examining the properties of the wireless card I get the message "State of adapter not in the registry.
Anyone know what it really means that I think it could be the crux of my problem. A second laptop XP connects without any problems, so I'm sure that the problem is with the laptop not the office or the router.
-
AMT-12557: TNS:protocol adapter not loadable
Hi am not able to start my listner, am getting above error
How to solve thisLSNRCTL> status Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=host)(PORT=1521))) TNS-12557: TNS:protocol adapter not loadable TNS-12560: TNS:protocol adapter error TNS-00527: Protocol Adapter not loadable LSNRCTL> start Starting tnslsnr: please wait... TNS-12557: TNS:protocol adapter not loadable TNS-12560: TNS:protocol adapter error TNS-00527: Protocol Adapter not loadable my path is PATH=C:\OracleClient32;C:\app\10017134\product\11.2.0\dbhome_1\BIN;C:\DevSuiteHome\jdk\jre\bin\classic;C:\DevSuiteHome\jdk\jre\bin;C:\DevSuiteHome\jdk\jre\bin\client;C:\DevSuiteHome\jlib;C:\DevSuiteHome\bin;C:\DevSuiteHome\jre\1.4.2\bin SuiteHome\jre\1.4.2\bin;C:\DevSuiteHome;C:\app\10017134\product\11.2.0\dbhome_1;C:\Windows\System32;C:\Windows;C:\DevSuiteHome\BIN;C:\app\10017134\product\11.2.0\dbhome_1\NETWORK\ADMIN;C:\Oracle\Middleware\jdk160_24;C:\james-2.3.2;C:\ja C:\james-2.3.2\temp mt set is C:\>set ALLUSERSPROFILE=C:\ProgramData APPDATA=C:\Users\10017134\AppData\Roaming CommonProgramFiles=C:\Program Files (x86)\Common Files CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files CommonProgramW6432=C:\Program Files\Common Files COMPUTERNAME=SRD-WS23042 ComSpec=C:\Windows\system32\cmd.exe FPPUILang=en-US FP_NO_HOST_CHECK=NO HOMEDRIVE=C: HOMEPATH=\Users\10017134 JAVA_HOME=C:\Oracle\Middleware\jdk160_24\jre\bin LOCALAPPDATA=C:\Users\10017134\AppData\Local LOGONSERVER=\\SRDVCDW003 NUMBER_OF_PROCESSORS=4 OnlineServices=Online Services OOBEUILang=en-US ORACLE_HOME=C:\DevSuiteHome OS=Windows_NT Path=C:\OracleClient32;C:\app\10017134\product\11.2.0\dbhome_1\BIN;C:\DevSuiteHome\jdk\jre\bin\classic;C:\DevSuiteHome\jdk\jre\bin;C:\DevSuiteHome\jdk\jre\bin\client;C:\DevSuiteHome\jlib;C:\DevSuiteHome\bin;C:\DevSuiteHome\jre\1.4.2\bin SuiteHome\jre\1.4.2\bin;C:\DevSuiteHome;C:\app\10017134\product\11.2.0\dbhome_1;C:\Windows\System32;C:\Windows;C:\DevSuiteHome\BIN;C:\app\10017134\product\11.2.0\dbhome_1\NETWORK\ADMIN;C:\Oracle\Middleware\jdk160_24;C:\james-2.3.2;C:\ja C:\james-2.3.2\temp PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC PHOENIX_HOME=C:\james-2.3.2 PHOENIX_JAVACMD=C:\Oracle\Middleware\jdk160_24\jre\bin\bin\java PHOENIX_JVM_OPTS= -Dnetworkaddress.cache.ttl=300 PHOENIX_SM="-Djava.security.manager" PHOENIX_TMPDIR=C:\james-2.3.2\temp Platform=BPC PROCESSOR_ARCHITECTURE=x86 PROCESSOR_ARCHITEW6432=AMD64 PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 58 Stepping 9, GenuineIntel PROCESSOR_LEVEL=6 PROCESSOR_REVISION=3a09 ProgramData=C:\ProgramData ProgramFiles=C:\Program Files (x86) ProgramFiles(x86)=C:\Program Files (x86) ProgramW6432=C:\Program Files PROMPT=$P$G PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\ PTSMInstallPath_X86=c:\Program Files (x86)\Hewlett-Packard\HP ProtectTools Security Manager\ PUBLIC=C:\Users\Public SESSIONNAME=Console SystemDrive=C: SystemRoot=C:\Windows TEMP=C:\Users\10017134\AppData\Local\Temp TMP=C:\Users\10017134\AppData\Local\Temp TNS_ADMIN=C:\app\10017134\product\11.2.0\dbhome_1\NETWORK\ADMIN UATDATA=C:\Windows\SysWOW64\CCM\UATData\D9F8C395-CAB8-491d-B8AC-179A1FE1BE77 USERDNSDOMAIN=domain USERDOMAIN=ASTZA USERNAME=useranae USERPROFILE=C:\Users\10017134 windir=C:\Windows windows_tracing_flags=3 windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log C:\> C:\>
Published by: adf009 on 05/31/2013 10:05
Published by: adf009 on 05/31/2013 10:05
Published by: adf009 on 05/31/2013 10:07adf009 wrote:
in 64 bit Windows 7And which edition? Don't forget, the oracle is not supported on any edition of Windows "home".
C:\>set ORACLE_HOME=C:\app\10017134\product\11.2.0\dbhome_1 C:\>set PATH=C:\app\10017134\product\11.2.0\dbhome_1\BIN LSNRCTL> STATUS Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=host)(PORT=1521))) STATUS of the LISTENER ------------------------ Alias LISTENER Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production Start Date 31-MAY-2013 08:55:55 Uptime 1 days 3 hr. 12 min. 23 sec Trace Level off Security ON: Local OS Authentication SNMP OFF Listener Parameter File C:\app\10017134\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora Listener Log File c:\app\10017134\diag\tnslsnr\srd-ws23042\listener\alert\log.xml Listening Endpoints Summary... (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=host)(PORT=1521))) Services Summary... Service "TESTOLTPDB" has 1 instance(s). Instance "TESTOLTPDB", status UNKNOWN, has 1 handler(s) for this service... Service "orcl" has 1 instance(s). Instance "orcl", status READY, has 1 handler(s) for this service... Service "orclXDB" has 1 instance(s). Instance "orcl", status READY, has 1 handler(s) for this service... The command completed successfully LSNRCTL> exit
It seems that you have solved the problem that you have opened the wire for. You are now able to start the listener.
>
C:\>sqlplus/NoLog
SQL * more: Production of release 11.2.0.1.0 Sat Jun 1 12:09:21 2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL > connect sysdba virtue
ERROR:
ORA-12560: TNS:protocol adapter errorAnd now you have a new, different problem.
99.99% of the time I see this problem with a connection of sqlplus on windows, this is because the variable ORACLE_SID is not set correctly, or not at all.
c:> set ORACLE_SID=TESTOLTPDB C:> sqlplus / as sysdba
am not able to connect as sysdba
Edited by: adf009, 2013/06/01 13:11
Published by: EdStevens on June 2, 2013 09:05
-
My HP Envy 15 t-k000 works very well, but it is slow. I thought it was my internet until I did some troubleshooting and discovered that I don't get the super fast speed that I'm supposed to receive this is because my computer does not have a fast enough network adapter. He's currently the Qualcomm Atheros AR9485 it came with. I watched the maintenance manual and could not find an upgrade. Is there a module I can replace with allowing for speeds 1 G?
The part number for the laptop is G0T55AV.
Thank you!
Hello:
The adapter you mentioned... Qualcomm Atheros AR9485 is the wireless network card, and I do not think that this card connects everything faster than 72 Mbps.
Your laptop comes with the card Realtek 10/100 ethernet (wired) and it cannot be upgraded because the ethernet chip is part of the motheboard.
If you want a gigabit ethernet connection, so I advise you to buy an external USB to RJ-45 gigabit ethernet adapter.
You won't find any wireless card that will go beyond the rate of 867 Mbps AC, and you would need a router ca to achieve these speeds.
You would also dismantle the entire notebook to replace the wireless card and if your laptop has a single antenna attached to the atheros wireless network card, you will not be able to upgrade to the fastest wireless card.
A proper AC map would be the Intel 7260 wireless card if your mobile phone has two antennas attached to the atheros card.
http://www.Intel.com/content/www/us/en/wireless-products/dual-band-wireless-AC-7260-Bluetooth.html
-
Thunderbolt to Gigabit Ethernet adapter not working
Hello
I'm new to this community has never had a problem on my mac since I had last year. MacBook Pro retina mi 2014 running El captain.
My ethernet is not picking up DHCP and thunderbolt ethernet does not appear in the network interface.
I use also fell in love with VGA Converter works on the two test port.
I also reset the PRAM and the MSC still nothing. Also restored some peripheral preference to another forum I found on the internet.
I created another account from administrator to test to see if the interface resumes, still nothing. How ever wifi works without problem
Thanks in advance if anyone could help with my problem.
Dump of information systems presents its collection as below.
Bolt of lightning to Gigabit Ethernet Adapter:
Name of seller: Apple Inc..
Device name: Thunderbolt to Gigabit Ethernet Adapter
Vendor ID: 0 x 1
Device ID: 0 x 8003
Revision of the device: 0x1
UID: 0X0001000203A8FCF0
Apple serial number: DTN450706APDWKHBZ
Route of chain: 1
Firmware Version: 5.5
Port (upstream):
Status: Connected device
Link status: 0x2
Speed: up to 10 Gb/s x 1
Port Micro Firmware Version: 0.0.8
I have this problem as well. My crush to the ethernet adapter was working yesterday, but now I have not been able to run all day. I even tried everything said in this thread: ImtiazThunderbolt Ethernet does not work after upgrade to Yosemite , you should try what is in the thread, as it has worked for some people.
-
Venue 11 Pro Ethernet Controller does not not at Gigabit speed
Hello
I got a place 11 Pro 7130 with the office computer docking station. I'm having the same HDMI DVI issues that everyone else is having, however I have also another problem with him where I can't connect to the Gigabit speed network, even if it is announced as having a Gigabit Ethernet card.
Dell Reference number that was on my order is part # 332-2364, which shows a number of part physically on the dock as model "K10A.
In Device Manager, it shows my network card, which must be a 6 AX88772C USB 2.0 to Fast Ethernet adapt. Fast Ethernet card I can say only means that it supports speeds of 10/100 MB, while according to the specifications for the dock it shows clearly that its supposed to come with a card Gigabit. Here is a link to the job description:
I also have this connected to two different network switches supporting the two Gigabit speeds and none of them will negotiate Gigabit speeds. On the properties of the adapter in the Device Manager, it shows the highest speed that I can force the adapter is 100 full duplex MB. When I connect my laptop E6520 to one of these same connections, it immediately detects GIgabit.
As another test, I plugged a USB31000S Startech USB 3.0 adapter Gigabit Ethernet and that will also establish links to Gigabit speeds. As by chance also a network ASIX adapter this adapter has, which is a reference number different and is described as an adapter Gigabit Ethernet in Device Manager.
So, what's the problem with the network card in my desktop dock or is - this false advertising, or y at - it an update of the driver or something?
Thank you.
The NIC dock is only 10/100. Unfortunately, the web page that you reference has incorrect information. A request was made to change this, earlier when it was caught, but obviously that has not yet arrived. I'm going to submit another application. We will soon have a dongle available Gigabit, but he didn't intend to offer gigabit in the current desktop dock.
-
After the last update will not work my speed dial icon
After the upgrade to firefox 5, my speed dial icon does not work
This version of abstract works well in ff5 https://addons.mozilla.org/en-US/firefox/addon/fast-dial-5721/versions/
-
Satellite P100-216: V20 EDR Bluetooth adapter not supported?
I recently bought a P100-216 laptop and I am trying to load it on a CD for my Toshiba Bluetooth V20 EDR adapter so that I can use my Toshiba Wireless Optical Mouse.
When to insert the CD and select install, I get a promt return "NOT taken into CHARGE OS VERSION.
Any ideas please. I called the TOSHIBA SUPPORT, but they have not been very helpful, they said to contact the manufacturer, I did.
All parts are genunie Toshiba Toshiba.And what operating system is preinstalled on your device? Is this software for Windows XP Home edition only or also for VISTA?
By the way: last stack of Toshiba BT you will find under http://aps.toshiba-tro.de/bluetooth/ Check it!
-
Wireless network adapter not available on my Equium A300D
Hello
I hope you can help; I currently have the Toshiba Equium A300D laptop. He has a virus and corrupt 1 of my hard drives, I can now t use, however I installed the operating system on my other hard drive, everything was fine until I try 2 connect 2 internet, windows diagnostic the problem and said that he couldn't find the network adapter for my Wi - Fi t.
Can someone give me help solve this problem?
Thank you very much
>.. .couldn t find my Wi - Fi network adapter
Wireless network card recognized and installed correctly?
What is the status in Device Manager?If everything is OK here I assume card WLAN is not properly enabled. At the first WLAN switch on ON position and then use combination FN + F8 to activate the wireless network card.
-
Jabra A320s Bluetooth adapter not recognized by Toshiba Stack
Hello, I have a Jabra A320s Bluetooth adapter (Broadcom Bluetooth 2.0 EDR dongle) and after the installation of the battery of Toshiba Bt 5.0.1 for Vista does not recognize my device. Ask me every time "If please, plug the Bluetooth device and click on the Ok button" and my Bluetooth device is pluged. I have no problem with my adapter Linksys Bluetooth 1.1. Also, I previously installed stack Broadcom and the drivers for my Jabra A320s (obviously, I now prefer the Toshiba one), I uninstalled it and I got the same message "Please plug in the Bluetooth device and click on the Ok button" configure the stack of BT from Toshiba. Can someone help me?
Hello
This seems to be a problem of the current Release v5.10.01. This will install only on the internal modules.
In order to work properly, you must first install v4.xx.xx. After that your can reinstall v5.xx.xx without problems.
This way I got it on my side.CU
DM
Maybe you are looking for
-
Satellite A30 921: XP does not detect the Firewire IEEE 1394 port
I have a satellite A30 921.There I link port aswell. My problem is that im trying to connect my camcorder dv via I LINK and this is the first time since I bought this laptop. But XP won't dectecting it. Can someone help me on this problem?
-
DAQmx Read is limited to 9 digital channels?
I'm reading several digital channels with DAQmx Read (Digital 1-d Wfm NChan NSamp). The output of the DAQmx Read vi is a table 1 d of digital waveforms. If I put this output through Cluster in the cluster that results seems to be limited to 9 element
-
My new printer works, but although I've marked the parameters for the letter and print preview appears correct, that the printed pages are coming on only the left excluded from the page. On the right 1/3, there is a gray rectangle. I really need to
-
I think I deleted windows... How can I get it back? Help!?
I downloaded Ubuntu stupidly just to see what it was... but I think I should have deleted windows vista. When I turn on my computer, it brings me to a screen startup 'grub '. Windows vista is listed, but when I click on it the screen goes black just
-
18 - 5019il AIO Win 7 drivers needed
Recently I bought HP 18-5019il desktop 2nos. now the problem is I have win 7 with me but HP site does not win 7 drivers. How can I get especially wifi and Ethernet card?