Access NBC will accomplish

Similar Questions

• Access Manager will not see this website need a supervisor password. This Page has been blocked by your approved Sites list.

  kb956196

  Access Manager will not see this site, supervisor password needs.  This page has been blocked by your approved sites list

  We have forgotten the password. is there a way to reset the password or to disable it without the password?

  Hello

  Download and run the http://www.nirsoft.net/utils/conadvpass.html program (if you are able to access the site)

  If not, perform this task:

  "If you have forgotten the password of Access Manager, you can remove it by accessing this folder in Regedit (don't forget to back up your registry first):

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\

  CurrentVersion\Policies\Ratings

  Select the key called icon in the right pane and press on delete. Close Regedit.

  Now, you can start Internet Explorer and goto tools, Internet Options... Select the content tab and click on disable. When asked a password, do not write, just click OK. This will disable access Manager, since nothing is more a password. You can enable it again as soon as invent you a more memorable password"

• change in Dynamics car for access mode will disable DTP effectively?

  Hi all

  "n a switch basis spoofing attack, the attacker takes advantage of the fact that the default configuration of the way of the switch is dynamic auto.". The network attacker sets up a system to spoof himself like a switch. This theft requires that the network attacker capable of emulating 802. 1 q and DTP messages. By encouraging a switch in thinking that another switch is trying to form a trunk, an attacker can gain access to all the VLANS allowed on the trunk port. »

  My question is. East-configuration of a dynamic to access the port DTP stop auto port? Or should be still the switchport nonegotiate command to run to the port in question?

  EDIT:

  • switchport nonegotiate- prevents the interface generating DTP frames. You can only use this command when the interface switchport mode access or trunk. You must manually configure the neighboring interface such as a network interface to establish a trunk link.

  I think that it answers my question, but can someone please confirm

  Thank you and best regards

  Adam

  Hi Adam, Mark,.

  Let me join you.

  As far as I know, a port set to the static access mode was disabled by default DTP. Switchport nonegotiate on a static port using access is not harmful but really does not do anything, like DTP would have been disabled in any case.

  See the following output. I have two ports, a static access a single static trunk. In the output of the show interfaces switchport , the access port said "negotiation of Trunking: Off" (which means DTC) while the trunk port reports this feature on. When I disable DTP on the trunk by using switchport nonegotiate, the trunk reported negotiating trunking as well as off, identical to what access port has had all the time:

  HQ(config)# do show run int fa0/10Building configuration...
  
  Current configuration : 58 bytes!interface FastEthernet0/10 switchport mode accessend
  
  HQ(config)# do show run int fa0/11Building configuration...
  
  Current configuration : 95 bytes!interface FastEthernet0/11 switchport trunk encapsulation dot1q switchport mode trunkend
  
  HQ(config)# do show int fa0/10 switchportName: Fa0/10Switchport: EnabledAdministrative Mode: static accessOperational Mode: downAdministrative Trunking Encapsulation: negotiateNegotiation of Trunking: Off[ ... cut ... ]
  
  HQ(config)# do show int fa0/11 switchportName: Fa0/11Switchport: EnabledAdministrative Mode: trunkOperational Mode: downAdministrative Trunking Encapsulation: dot1qNegotiation of Trunking: On[ ... cut ... ]
  
  HQ(config)# int fa0/11HQ(config-if)# switchport nonegotiateHQ(config-if)# do show run int fa0/11Building configuration...
  
  Current configuration : 119 bytes!interface FastEthernet0/11 switchport trunk encapsulation dot1q switchport mode trunk switchport nonegotiateend
  
  HQ(config-if)# do show int fa0/11 switchportName: Fa0/11Switchport: EnabledAdministrative Mode: trunkOperational Mode: downAdministrative Trunking Encapsulation: dot1qNegotiation of Trunking: Off[ ... cut ... ]
  
  

  Personally, I do not believe that an access port longer listening DTP frames. Yes, it can receive (it is connected to send link partner or not these images, right?) but reject it immediately.

  Even if an intruder connects to a switch configured as an access port port it doesn't really matter because even if the neighboring interface is set to dynamic auto / desirable Dynamics / trunk it will end up as an access port.

  
  This is true but an attacker wouldn't be using an ordinary Cisco switch that is well-behaved. The attacker would use a PC and a DTP message injector tool to try to force the other port to become a trunk, regardless of what is the other port's response. Of course, if the port at the other end is a static access port, the attacker is out of luck.
  Best regards,Peter
  

• access code will work no - has rejected the correct password, deleted the data

  Hi people

  Had a problem with the iPhone OS 9.3.1 (6 s)

  The password was rejected, even if she did the same every time: it worked randomly.  This question has followed a request to change the password to another.  I put in an alphanumeric password with a special character, as he refused to let me use the previous password.

  I tried to change the password but failed at each point and wouldn't let me delete the iPhone either.  He decided to spontaneously clear the data while it was in my pocket.

  I restored the iPhone and will monitor.

  I was wondering if anyone else has had this problem and it could be a virus or something.  Could it be spyware? Or simply corrupted software?

  Your thoughts appreciated

  Unless your phone has been jailbroken (and I doubt it was) it wouldn't get a virus.

  It's a working phone? Is there an exchange account or an email from work?

  The request came via a pop-up of Safari?

  If the request came from Safari, I would follow the steps below. If it's a working phone that I would like to talk to your people in TI.

  Close Safari completely from the window of the selector app by double clicking the Home button and slide up the preview pane of Safari until it disappears from the display. You may need to search the Safari part covering scribbles to the left. Then go to settings > Safari > clear the history and data from the Web site. Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears.

• All iOS Devices "allow access" but will be out of sync

  Hello

  I have a 2 Air iPad & iPhone 6s, using iTunes on Windows 10.

  I always sync my devices by USB. I have not synchronized each device in a few weeks. The two iOS devices running iOS 9.3.1.

  For some reason any when I plug in a device, under Windows it warns me that 'Apple iPad' (or iPhone) is plugged in (not his name), and then on my iPad/iPhone, it asks if I want to "allow access". Neither the source device list appears in iTunes and therefore cannot sync my devices.

  I have synced with this installation of iTunes on this computer many times before, so I'm not sure why this is happening now.
  I have deleted my iTunes twice lockdown folder and restarting computer & all my devices.

  Can anyone suggest a solution?

  Thank you!

  Ash

  Problem solved. The following steps are taken:

  Reinstalled the drivers:

  Plug in Device iOS

  Open Manager devices (search in the start menu)

  Portable devices - right click on the Apple iPhone and choose Update driver software.

  Go to C:\Program Files\Common Apple Mobile Device Support and choose the Drivers folder. Click OK.

  Click next to reinstall the driver pack.

  Synchronize now works as usual.

  Hope this helps anyone who is going to search for.

• Access code will not work to reset iPad

  An employee who retires gave his iPad.  She gave me an access code and password to his iTunes account.  I have reset the password, and you want to "Erase content and settings."   I get the message that the password is incorrect.  I tried the old password and the new password.  What other password could reset search?

  I'd give him a call and see if she can help.

  She gave me an access code and password to his iTunes account.

  I think you want to enter his password to his iTunes account.

  -------------------

  You should have the employee go through this procedure before leaving.

  What to do before you sell or give away your iPhone, iPad or iPod touch

  http://support.Apple.com/kb/ht5661

  https://support.Apple.com/en-us/HT201351

• Site WRT160N access restrictions will not work for https sites

  I configured a Web site blocking blocks http:// political access successfullywww.facebook.com on a WRT160N V1 v1.02.2.  I did it by entering www.facebook.com as URL #1 and "facebook" as a keyword and it works very well.  However, I have found that this policy does not prevent https:\\www.facebook.com.  Looks like the keyword would be able to block it but it does not work.  Help, please.

  It is not possible to block HTTPS web sites because the URLs are transmitted encrypted and therefore are not readable by the router...

• Access Manager will not allow access without password

  Access Manager does not allow me to access anything without having to type the password first. He started to do this without my permission.

  How can I stop the stop?

  Access Manager does not allow me to access anything without having to type the password first. He started to do this without my permission.

  How can I stop the stop?

  The administrator has put a password on the Internet.
  You can not surf without your administrator password. Talk to this person. No one here can help you.

  t-4-2

• HP envy 110: hp envy 110 will accomplish the print job

  I recently bought a Dell Inspiron with Windows 8.1.  I connected wirelessly with HP Envy 110.  It is very inconsistent on whether she completed print jobs.  The questions comes with several documents pages, if I print single-sided or double-sided.  Sometimes it works, more often than otherwise it doesn't.  I previous had a HP laptop works wireless with the same printer - no problem.

  two documents of several pages printed at the end!  hoping that this is a trend.  Thanks a lot for your help.

• error 503 on Win7 Web Access Service will not stay running.

  Hi all, I just can't get the service to stay running. I checked a few post about the problem and that you have tried to run tomcat6.exe under permissions admin and Win XP/Vista, compatibility without success modes. UAC is disabled.

  I was running 2.0 on this configuration before the problem started after the withdrawal of some additional HARD drives on my machine (not the OS drive however).

  As a remedy, I removed and reinstalled VMware Server (I had to remove and reinstall MS C++ 2005 to get the installation to run without breaking - a problem with Setup DLL does not complete) but all installed fine except for this one problem now.

  I need to get this race again to reconnect my vmdk files located on a sperate HARD disk.

  In Event Viewer, I ID 7034 Service Control Manager 'terminated unexpectedly.

  Mount all: Windows 7 Enterprise x 64, 8gig Ram, Intel Core 2 Quad Q9550. Maybe someone can tell me newspapers Tomcat6 in this configuration? I have remove the AV software also to see if blocking the service of the State of enforcement.

  Thanks for any advice - I'm running out of time and ideas.

  I had this problem too - with the answer here;

  from the 503 error correction

  Trevor

• IMovie 09 with El Capitan will not otherwise pictures/iphoto or itunes - projects lost forever?

  Simple (I hope) questions on imovie and iphoto/photos/itunes... Well simple enough...

  I use imovie 09 with El Capitan. As you know that el Capitan not including iphoto, imovie 09 can no longer access to iphoto.  Pictures is the replacement for iphoto and imovie 09 will not otherwise be. Finally, imovie 09 access is more itunes.

  I have so many projects that are now useless, like all pictures and external soundtracks are more accessible.

  IF I update to imovie 10 version (a snip at £10.99 apparently)...

  (a) my imovie 09 projects will be viable, IE. will be links to the (ex-iphoto, now photos) images and itunes files to recovery for my old projects are not lost forever?

  (b) the new imovie will be able to access photos and itunes as good old imovie 09 used to before el capitan burned its bridges for her?

  This may be academic, because in some things I can't access my old projects in any case. What is scary and sad.

  But any assistance gratefully received. Thank you!

  I use imovie 09 with El Capitan. As you know that el Capitan not including iphoto, imovie 09 can no longer access to iphoto.

  Have you tried updating iPhoto version 9.6.1? This version works well on El Capitan and iMovie 9.0.9 shows iPhoto libraries in the photo browser. The screenshot below is from iMovie on OS X 10.11.5 9.0.9: I don't have older versions of iMovie, if they are still able to see the iPhoto library.

  

  You can update to iPhoto 9.6.1, if you have a version of iPhoto 11, which shows the history of your purchases on the App Store in, see user Barney'a trick:

  Can't update iPhoto because it is not available in the App Store.

  Your question (a)

  I migrated libraries iMovie 9.0.9 to 10, some time ago, and the conversion was lossless. But I can't test what will happen now.

  Your question (b)

  iMovie 10.1.2 shows me all the libraries of my picture in the Media tab - the iPhoto, Aperture, photo library library library, also a long time that you have installed the compatible applications.

  And the iTunes Library will accomplish in the Audio tab.

• Can't access the files from the HARD drive of any account on the windows computer 7

  Hello

  When I tried to connect my Western digital external hard drive to a 32-bit desktop P 3 with a Windows XP SP1, then this HARD drive is not detected. Then I tried to copy his WD driver ITS a USB Flash drive, then isntalled all the WD HARD drive was always plugged into my computer. After that, the HARD drive was identified by computer and appear in my computer. As I thought that this folder has been created by the installation of the driver, did not exist on my HARD drive before connected to the desktop computer.

  When I plugged my WD HDDagain to my laptop HP with Windows 7 SP1 64 bit and I tried open this folder, and then the main folder only opened without facing access denied, however, access to all of its subfolders, and the files inside it has been declined.

  In addition, althoguh the username admin Curernet "Mohammad" can open the folder of human "83f04ce083fb03083bb88e50", as shown in the screenshot above, it can not access all of the subfolders, files in the main folder, and to access, I will need to use the scecurity tab. Thus, it would be absolute nonsense, if I want to have access to all of the subfolders, I will need to use the security for each tab.

  How do I gain access to all of the subfolders with use of the Security tab once the time (i.e. as long as all subfolders are inside the main folder, then simply use the main folder security tab?

  

  As long as the current username "Mohammad" can open the folder of "83f04ce083fb03083bb88e50" man, "Mohammad" is so allowed system to have access to the main folder as shown in the screenshot above, then I think that the username 'Mohammad' will have to reach all subfolders as well. However, when you try to open any subfolder or file, then the current user 'Mohammad' name could not have access to all of the subfolders in the main folder and all subfolders or files opening gave me this error below (screenshots below)

  

  

  I tried to remove this main folder, however, each time, I found myself with a loop "you need permission SYSTEM to make changes to this file.

  

  Original title: file access denied

  Groan.  It is so easy to fix, and you should have gotten a lot better support now.  Surprisingly, the worst suggestion came directly from the "Microsoft Support Engineer" Reda Singh, his suggestion potentially compromising the security of your computer while doing absolutely nothing to solve the problem.  Fortunately, it seems like you didn't do something quite right and so the script was not run.

  First of all, let me explain why this difficult access occurs in the first place.  Originally, you had three 'users' granted access to training, SYSTEM, Administrators, and Mohammad.  SYSTEM allows Windows to read your disk, and retrieve things like its label.  It can also allow your antivirus software to access the drive.  Because this OPTION is enabled, Administrators is not accomplish anything, even if you are an administrator.  As long as this OPTION is enabled, this permission only works for programs, that you manually raised to run as administrator.  This leaves access to the drive depend on the last entry, Mohammad.  The problem is the SID behind Mohammad is only good on the computer, it was created, so if you connect this HARD drive on another computer, no access is allowed!  Enter the security on the other computer dialog box, you can either see something "could not read permissions" or you will see the SYSTEM, directorsand a third entry with a long series of numbers.  It's your first computer Mohammad , and it will not work on another computer.

  It is not surprising that you're facing this problem because you are using the drive on multiple computers, which is running XP that is not UAC.  Here's how to unlock a storage drive (in Windows 7) so that it can be normally accessed in any PC without any permissions problem:

  1. Press [Windows] (or click on the circles to start), and then type "user account control".
  2. In the search results, click on "change user account control settings."
  3. Drag the slider to "never notify".
  4. Click [OK] to confirm the changes and restart your computer.
  5. Open Windows Explorer, right-click on the affected drive, and then click Properties -> Security (tab)-> [Advanced]-> owner (tab)-> [change].
  6. You should be on a dialog box that asks what you want to change the owner.  Click on Administrators.
  7. Check Replace owner of subcontainers and objects, and click [OK].  Windows should start processing all the files on the disc.  This may take a few minutes.
  8. When it's done, click [OK] to close the property message and then close out of all other dialog boxes.
  9. In Windows Explorer, click the drive affected again, and then click Properties -> Security (tab)-> [Advanced]-> [edit permissions].
  10. Now in the dialog box Advanced security settings , click the button [delete] repeatedly to remove all permission entries.
  11. Add SYSTEM and grant full control.
      1. Click on [Add...].
      2. Type 'SYSTEM' and press [Enter].
      3. Check full control in the allow column and press [Enter].
  12. Add Administrators and grant full control.
  13. Add users and grant Full control.
  14. In the dialog box Advanced security settings , you should have three entrances of permissions: SYSTEM Administratorsand users, all granted full control.  Check "Replace all permissions of child object with permissions inheritable from this object" and click [OK].
  15. Click [Yes] to confirm the replacement of permissions.  Again, Windows start to process all files on the disk, which may take a few minutes.
  16. When he finishes, close to all the dialog boxes and check that all records are now accessible.  You may have to refresh (or close and reopen) explore to see the changes.
  17. Assuming that it worked, we will re-enable UAC to reduce the vulnerability of temporary security, that we created earlier.  Press [Windows] and then type 'user account control '.
  18. In the search results, click on "change user account control settings."
  19. Drag the slider to the position below the top (position #2, by default).
  20. Click [OK] and restart your computer.  Now, the files remain accessible.

  This should straighten the permissions of your disk storage so that you can use it again.  You may need to empty the trash on this drive after changing permissions.

  Don't do this procedure on your C:\ drive, it will seriously reduce the security of your Windows installation.  This is for the readers of storage only.  If you need access to a specific file that you created to C:\, you can safely do the steps above on this issue, but never on the C:\ drive itself.  Please note that when you perform this procedure on a folder instead of a hard drive, you will need to replace this step #10:

  10. now in the dialog box Advanced security settings , uncheck the box "Include permissions can be inherited from the parent to this object" and click [delete] to confirm.  If some permission entries remain, click [Remove] until they are all gone.

  The concept is the same in Windows Vista, even if the exact steps differ from the foregoing at least Windows 8.  In Windows 8, you must also disable UAC with a registry tweak because, unlike Windows 7, UAC remains on even when the value of "Never notify", giving rise to all sorts of problems in Explorer tries to work with file permissions.

  Oh and to answer one other question I saw you ask from the beginning: this folder of the .net Framework was created by .net Framework Installer.  He breaks all the rules and frustrating unpacks his junk everywhere where it feels like.  I got it decompress on a front SD card, making the installation would take forever.  After installing the .net Framework, you probably disconnected the drive before restarting your computer, so these files let me.  Or the installation crashed and started you again.  Meanwhile, installs the failure left its Temp files behind.  It was supposed to remove the folder when the installation is complete.  You can remove safely as the folder manually.

• 5.2 ACS access policy

  Hello

  could you recommend me how I accomplish the following task, I need to configure ACS 5.2 to authenticate WIRELESS users.

  There are two types of users: users in domain and not domain users.  I want to authenticate users in domain with PEAP-MSCHAPv2.

  And no domain users, I want to authenticate the host lookup (MAC).

  The question is how to properly organize access policy? I need to access several services or access service will be sufficient.

  Thanks in advance.

  Hello

  Your understanding is very close but MAB to work to work with wireless users, you need to activate the option for mac filtering to the SSID. This setting is global and will always trigger unlike port based authentication where you can define a sequence of authentication.

  You can create a service and strategy with which you can leave several policies. For the parameters of the identity of this policy, you will need to create an identity store sequence so that either AD is used first, then the internal hosts serves as a second, or vice versa. For the identity parameter, you need to set the indicator not found user to continue.

  Let me know if it works.

  Thank you

  Tarik Admani

  Please rate if useful!

• LDAP and APEX for access from home

  I am new to LDAP and only familiar with concepts so bear with me. I would like to know if I can use LDAP with an APEX application so that employees can access the LAN/intranet working system as well from home (or anywhere on the internet). They have access to the intranet via the LAN by signing on the use of their Novell username and password. I'm assuming that they can connect to the House using the same Novell username and password. (BTW-I don't want to set up APEX user ID or database user ID for users of 1800-1900). This can be accomplished? If so, how?
  
  I have a meeting with the vice-principal of the week next to discuss this project which it can manage access from the internet.
  
  
  Thank you in advance.
  
  Robert
  http://apexjscss.blogspot.com

  Hi Robert,.

  Yes, he is indifferent to the APEX where a user comes from. As I mentioned above, authentication is performed in the database by data that shows through the front. As long as the front-end server reaches the end back, your users can connect.
  The onlyl restriction that can be there is the Novell (LDAP) server not accepting does not request to the database server. But if you have LDAP works on your APEX for a LAN/WAN access, he will work with the reverse proxy as well.

  -Udo

• What add - it (s) FF will complete the name, address, telephone, etc. When you fill out an order form on a site?

  With my new Win7 desktop, options for the completion of the data after I type the first letter or number, is not, as was the case with my old unit.
  Such as, if I typed 'e' East Moline came, or if I typed a "6" my zip code came.
  I don't remember, but I guess that this has been accomplished by an add-on for Firefox.
  Which one, or ones, will accomplish this?
  If it wasn't an add-on, how to activate this option?

  Get a form by completing the module