Cloned Partition Windows not start (Winclone)

Similar Questions

• error 0xC0000225, recovery partition does not start

  Hello

  I have a HP dv7 with Windows 7 Home premium 64-bit.

  A few months ago, I did a factory restore, the recovery partition start (I have no recovery disks). After that, I thought to divide my C: partition where Windows is installed, and I did it with Windows disk management.

  So my new scores were: C: D: with recovery, OS, E: HP_Tools and g.: the new partition.

  A few days ago the sistem ran very hard, so I thought I do another factory restore from the recovery partition. When I rebooted and you press F11, I got the "0xc0000225 error".

  I have a Windows 7 Home Premium 64-bit bootable drive and I tried Startup Repair tool and other repairs of sistem, checks HDD, but everything seems to be ok.

  I reinstalled the operating system, from the disk bootable on C: (OS starts and works well) and let the other partitions as they were... but it seems that the recovery partition still does not start if I can do a restore from the factory with all the drivers and utilities, as they were at the beginning.

  Any ideas on how I can do?

  Thank you!

  It seemed that it there was not much I could do about this problem. My disk is dynamic, there is no Recovery Manager from the Start Menu, there has not been any creation of HP with HP folder recovery support. I managed somehow to make a repair disk, I tried it but no results, the error kept popping out every time.

  I inserted the Windows 7 disc to try to delete all partitions, including the recovery and HP-tools and do a Windows Installer Cleanup, but the Format, New and Delete buttons are inactive.

  I did some scans disk and memory tests, everything was ok... I started with a disc of Hiren and accesed the HARD drive with a program based on linux and so I managed to delete the partitions.

  After I installed a new copy of Windows 7 to work with my SN and everything was ok. Unfortunately I lost partitions recovery and HP-tools, but at least it works well again.

  Thanks for your all your support.

• Vista Boot Camp partition does not start

  I have been using Fusion to open my Boot Camp with Vista Ultimate installed partition.  It worked fine for months.  Suddenly, I get a windows Boot Manager error.  The message says that some required files missing.  Here's the weird: I can open the Visa using Boot Camp partition.

  Any ideas?

  Tim

  Note: These steps assume that you have a default Apple installation of Windows and a VMware Fusion Boot Camp Virtual Machine default partition and if you changed the Boot Camp partition the Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Virtual Machine package first.

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will remove the Boot Camp Virtual Machine meta-data partition. Note: This does not affect the Boot Camp partition to install Windows. Also make sure that you copy the entire command below "rm" line at the beginning of the ' (quote) after the p in the Camp. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp."

  3. start Fusion (/ Applications/VMware Fusion.app) and select the Boot Camp partition on the library of the Virtual Machine window, and then click the run button.

  Notes: Then, an authentication dialog box appears. "VMware Fusion requires that you type your password." Enter your name and password, and then click OK. (It is necessary to remove the Boot Camp for the merge partition to access it directly).

  Then, we should see a Boot Camp partition message stating "VMware Fusion prepares your Boot Camp partition to run as a virtual machine. This may take a few minutes. This occurs once. »

  When the virtual partition Boot Camp Machine starts for the first time after this VMware Tools may want or will install/update and restart the virtual partition Boot Camp Machine.

• Windows not start on Satellite A205

  I have toshiba A205 with vista windows.
  My system stoped working all the way down loading photos.

  Now, if I take my system, I have the following msg. -.
  "windows has not start." It is perhaps because of recent hardware or software change. To fix the problem insert the instalation disc and restart. "

  It shows also missing file as file\windows\system32\volsnap.sys.

  I have important documents in the laptop.

  Can someone guide me how to do?

  Hey,.

  You can start safe mode? Is press F8 before Windows loads you should be able to choose this mode.
  Check it!

  Perhaps you can restore the system to a previous state. Did you change something on the hardware and software configuration?

  In the worst cases, you need to reinstall Windows using the Toshiba Recovery disk?

• Windows not start on Satellite C50 - B - 15 c

  Hello everyone,

  First of all, sorry for my English origins, the french does not help... But it won't translate with Google Trad

  Well, I have a problem with my laptop Toshiba Satellite C50 - B - 15 c. Yesterday, I had to update Windows 8.1, after update, it restarts, but it never comes back. Had a black screen and mouse (can move it). After a few restarts, so I decided to restore before the last update. Backup done but always the same problem (black screen and mouse)

  So I decided to re - install Windows 7, the installation is complete, restart the computer and what I get? Error screen of windows with a few choice you know certainly: "safe mode, start windows etc.," whatever i choose, it is not do anything just restart and come back to the same screen...

  Does anyone have a solution?

  For more information:

  -I'm not a computer novice
  -J' have HD format
  -J' I try Boot CD (do not start) and USB Boot (give me this problem)
  -I don't have Toshiba Recovery CD (I bought the laptop in a big industry in France)
  -Maybe I'll try to install Linu, just to test the HD.

  Have a niceday

  Today, I tried to install Ubuntu 14.04 and it does not work.

  I go to install Windows 7 on HD but on another computer and install works!
  After inserting the HD on my laptop it does not work...

  Looks like the problem is in the BIOS.

  Someone had something?

• Error not allowing Windows not start

  My computer with Windows Vista, will not start.  It tells me that there is an error in my Windows application and allow me only so that it starts in repair mode.  In this mode, request a "another user name" and password... There is not a game I know.  If I hit F8 to try to start in safe mode with guests he brings me the same startup repair... help!  Thank you!

  Hello

  If you can get into the BIOS, I suggest you follow the steps in the following article to boot from the drive:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

• Drive external HARD with bootcamp partition, does not start?

  Hi all

  If I'm running into a bit of a problem. I had an older macbook pro (mid - 09), kept just upgraded HARD drive I had before I sold it. On this HARD drive, it has a partition Mac OS 10.8, and a boot camp windows partition 7. Now that I have my new Macbook Pro (mid-12), with an impressive but small SSD, I tried to start the windows partition via external enclosure. Im running in some points once I selected the bootcamp on the HARD drive partition. It tries to open windows, but I get the error "Windows failed to Start. Kind of stuck here, seeing that I won't try to Exchange hard disks for obvious reasons. Y at - there a fix, or any way around it?

  Windows 7 can not boot from an external device. Visit the Microsoft Windows features.

• After changing the partitions may not start Vista

  Hi all

  I have problem with my Satellite L310...
  I want to a different partition. I m using paragon partition magic. After that, you are prompted to restart windows, but when I restart it I couldn t get into windows.

  There is a note "Please insert... recovery CD. ».
  How I supposed to do? If I re - install windows, I m using the original windows Vista and I haven t done a recovery CD...
  Thank you

  Hello

  Can you please tell me why you play with partitions if you didn't create recovery DVDs?

  Have you seen this Toshiba recall:
  * Important INFORMATION *.

  * your system is equipped with a hard drive recovery system. If you need repair *.
  * your computer in the restaurant to original factory State, you can do it directly *.
  * from the HDD (press F8 when you start your computer, choose 'Repair your computer' *)
  * and follow the instructions in the menu) or create a bootable recovery for this fin.* drive carrier

  * Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator."
  * to ensure that you are able to restore your computer to the factory installed state, even if your computer is severely damaged.*

  I don't know what you did exactly, but you have big problem now. Recovery image cannot be used for the installation of the OS more and cannot create recovery DVDs too.
  What you can do now is to order the new DVD of recovery under https://backupmedia.toshiba.eu/landing.aspx

  Sorry mate :(

• Mavericks on external partition does not start

  Hello

  I'm trying to implement the Mavericks on a partition on my external hard drive. Found several good guides on how but can't seem to boot from it.

  I created a Mavericks install USB and started one. I deleted the partition (guid partition map and extended journaled) where I wanted to install the Mavericks ran through the facility and said it will re-start automatically that it did.

  However it is started on my internal drive with OS X 10.11.4.

  The partition where the Mavericks has been installed is displayed in the Finder.

  The partition where the Mavericks has been installed is displayed as a virtual disk in system preferences, but when Source selected to restart, but after rebooting, it does not appear.

  When I hold the ket Option initially upwards, it does not seem to me to choose.

  I retried with 'createinstallmedia' https://support.apple.com/en-us/HT201372 and Diskmaker, but the same results.

  How can I solve why it why it seems installed, but is not a bootable disk?

  Thanks for any advice.

  Also...

  I use a partition of 100 GB of the Mavericks on a backup drive Seagate to Office for Mac 4.

• Recovery partition does not start!

  Hello dear forum participants!

  I have computer hp pavilion dv6 laptop, recently I reinstalled original OS (win7 home 64 bit that comes with the laptop) to win7 Home premium.

  Now I want to return to the default settings, and I'm unable to start on the HP Recovery partition.

  When I press F11 at startup it boots regular OS, but not the HP recovery software.

  How can I get my work as a recovery partition?

  Problem has been solved!

  It seems that recovery partition boot records have been corrupted by the installation of the non-native OS, but the directory structure and files were intact.

  Steps performed:

  -J' created the recovery USB using HP USB recovery Flash Disk Utility disk

  Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-77449-1&lc=en&dlc=en&cc=us&lang=en&os=4062&product=4057188

  -Fact flash drive bootable using EasyBCD utility

  Link: http://neosmart.net/dl.php?id=1

  just add a new entry to point the finger removable WIM image, see documentation for EasyBCD

  http://NeoSmart.NET/wiki/display/EBCD/EasyBCD+documentation+home

  It's quick and dirty solution, there will be more estetically without creating recovery USB drive, simply add the for the recovery partition boot record.

  Thank you all for attenction!

  IonCannon

• Windows not start successfully after updating BIOS on Satellite P100-240

  Hi all
  After you install a new version of BIOS my laptop wouldn't start windows xp properly.
  It just freezes in a screen black, I was able to go in safe mode, but then I reinstalled windows and now it's the same problem and I can't go in safe mode as I haven´t went through all the procedures of installation of windows.
  Please help me: I can reset the BIOS to my old?

  I use a satellite P100 - 240 (PSPA3E) and any help would be greatly appreciated.
  Thank you

  Hello

  What version of BIOS you have loaded? Version 4.20?

  Normally it shouldn´t do problems, especially after upgrading your BIOS. May I ask if the version of Windows installed on your machine you´d is on the media recovery or from scratch (from scratch means install with a genuine Windows CD and install the downloaded drivers)?

  If everything fails then send you the machine and let check the laptop on certain shortcomings of the BIOS.
  Click [HERE: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] to reach the index of ASP (authorized service provider) and find one that is closest to your country.

• Windows not start displays the following error message

  (X) /8130/ Realtek RTL8139 810 x
  Fast Ethernet PCI v. 2.16 controller (041224)
  PXE - E61: Media Test failure, check cable of
  PXE - MOF: Existing PXE Rom
  No Bootable - insert the startup disk, and then press any key
  When I insert the factory OEM disc, everything works well, but without it, the error message comes up what can I do to start normally

  discodazz1,
  The information you listed are oriented to the network card and he doesn't see any boot device.  The first thing I would do is to check the BIOS settings and make sure that your drive is seen correctly and that the boot order is set to boot from your 1st CD then your drive hard 2nd drive.  You will need to check with the PC manufacturer for assistance with the BIOS settings.

  Then I would try the steps listed in this thread: XP without boot troubleshooting

  If you are able to enter safe mode but not any other way or you can't in safe mode then I would do the following.

  If you can boot into Safe Mode with command prompt, or if you have a XP CD and you can boot into the Recovery Console, and then run the following commands.

  Chkdsk /r

  sfc/scannow (you will need an XP CD for this command)

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 500-281: does not start a 2nd drive cloned in sata1

  HP 500-281 desktop

  Win 10 home

  BIOS MEMv80.22

  Short version of the latest issue:

  Fine Win10 after upgrade to 10 at the start of the hd0 in sata0 slot (original). HD1 in sata1 slot is a new clone of HD0 (Win10, using Reflect). HD1 and its files in Windows more HD1 is seen in the BIOS. If the boot order is changed in the BIOS will not start (sata1 above sata0), saying "no boot disk. Boot order reset default (sata0 and sata1). If the HD0 data cable is disconnected, does not start, once again "no boot drive" Boot order is reset by default. Cable data Sata0 off HD0 and HD1-connected, with no data connection to HD0. Now, she starts to HD1. How to start the HD1 connected to sata1 with or without HD0?

  Greetings,

  UEFI is ruthless.

  The cloned drive should be connected to the port SATA (SATA0) where the source drive has been connected.

  The cloned drive does not start on the SATA1 without modification.

  See you soon!

• Bootcamp does not start

  My bootcamp partition is not start after resizing partition. I'm under el capitan. Thank you very much for your help!

  Last login: Saturday, June 25 at 14:30:15 on ttys000

  independenceadec1s-Mac-mini: ~ the independenceadec1 list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 256.1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Untitled Apple_HFS 1 GB 101,0 disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 71.3 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 82.7 GB disk0s5

  independenceadec1s-Mac-mini: ~ independenceadec1$

  Can you use [help] can not boot Windows after resizing partition (8.1) as reference and check if the solution will work for you?

• Equium - after hibernation, it does not start

  I put my laptop into hibernation a few days ago.
  I can't start over, however.

  Can someone help, please?

  What do you mean go can t get to start?
  Windows not start or complete Notepad?

  Moreover, what laptop do you have?

  You can try to remove the battery and the AC adapter. Wait 30 to 60 minutes and reconnect the adapter AC/DC and battery.
  Maybe it works.