Similar Questions

• Cannot connect to Internet after reinstalling vista.

  * - Original title - OUR Dell laptop came with the vista operating system

  OUR Dell laptop came with the vista operating system. Myhusband dislike vista.  Exp of Windows has been installed on our laptop.  recently, virus disabled the jury mouse & key.  I reinstalled vista. How can I connect to the internet.  I get an error msg.  the underlying ethernet connectivity required for the broadband connection was not found. pls install activate the ethernet adapter.

  Fran

  Hi Joseph,.

  I see that you can not connect to the Internet after reinstalling vista. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2 have you installed all necessary drivers after installing vista?

  3. do you format the disk hard while re - install vista?

  4. who is the ISP?

  I suggest you to refer to this article and check if that helps.

  Wired and wireless network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-vista&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• cant conect to internet after reinstalling windows xp

  system crashed and had to reinstall service pack 3 system operations. all files lost and now I can not even conect to the enternet. tried everything. need help making a wireless connection... Theres not even a frame local-lan or wireless on my computer

  After reinstalling you installed all the drivers for your system? For example for the motherboard (chipset), audio, video, LAN (network adapter) and so on?

  If this isn't the case, you will need to do. Support web site of the manufacturer of the computer to check for the drivers for Windows XP for your model specific computer/specifications. You may need to get some drivers directly on the site of manufacturer support / Unit equipment for material or devices you have installed.

  Computer manufacturers
   http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Kind regards

• D7000 will not connect to internet after reinstalling

  Hello

  We moved our D7000 modem router from one room to the other and now it does not connect to internet at all. I spoke with our ISP and everything is fine on their end. I connected the modem and reset our ISP connection & the password, and the ISP did the same thing, without effect. The phone line has been tested, it's ok. I swapped the cables to make sure that they are not defective. I moved the modem to return to the old location, but now it does not work there either.

  WiFi seems to be ok and all our devices (phones, tablets, computer) recognize the wireless network and modem, but there is simply no internet connection. It is bizzarre! Nothing has changed, there is no new hardware, no updates or upgrades, the ISP is always the same, the only thing that differs is the location, in the same House.

  The lights on the router modem are as follows:

  Food - white

  Internet - amber

  DSL - off

  WiFi - white

  Any ideas what I could try to make it work again? Should I do a factory reset on it? This could be the cause? Move a modem do not stop working. We only had since November so it isn't old yet, and it has been working fine so far.

  Any help at all would be greatly appreciated!

  Päivi

  Hello

  It has been a while now, but I thought I would update this for anyone interested or affected by the same problem we did.

  After weeks of back and forth with the ISP and try and test anything and everything we could think, including the replacement of the D7000 in store warranty (not just once but), and nothing is helping, the ISP finally filed a foul for us and sent a CET. And what do we know? There was a flaw in the riding of Telstra which he had found, and which caused our internet connection fails. After that which has been set, we are online again. The line still falls here and there and the phone line is cute, but at least we are connected.

  And now I'm fighting with the ISP for refund during all these weeks we were disconnected while they refused to be a mistake for us and have someone out. Time for a new ISP, I think!

  Hope this helps someone else with the same problem there.

  Thank you

  Päivi

• No internet after reinstalling Windows XP

  My problem is that I just reinstalled XP but there are a few brands of yellow questions next to some devices. I am aware that I need to install drivers that windows can recognize these ports.
  The thing is, I don't really know the brand of my PC, all I know is that after opening, it appears that the motherboard is fsbighz ddr11800 (incredibly stupid, I know, but the cpu is old enough) I think it's a Dell but the model doesn't. etc I wouldn't be able to tell you.
  Using another PC with internet, I managed to locate the drivers that I need (by Googling the motherboard) I then downloaded the software on a CD and ran it on my PC without drivers. However after this software has me only said that the drivers that I need, and he then says that I need an internet connection to update them - which I don't have, so I'm in a situation of almost 22 catches. If I could get copies of the drivers, so I might be able to do, or even simpler - an internet connection on my PC so that I can update these drivers, perhaps through connection sharing the (which I do not know how?)
  Any help would be much appreciated

  You have to learn how to take screenshots instead of using a camera. :)

  Well, we were close. The image I posted is an ASRock > ALiveNF6G-DVI. What you have is an ASRock > ALiveNF6G-VSTA.

  The following URL uses drivers that you need.
  http://www.ASRock.com/MB/NVIDIA/ALiveNF6G-VSTA/?cat=download&OS=XP

  Good luck!

• Unable to connect my system to the internet after reinstalling my OS.

  NEED HELP IN OBTAINING MY COMPUTER CONNECTED TO THE INTERNET

  I recently had to reinstall my computer Dell Dimension 4600 (Windows XP with service pack 1) because the computer crashed I lost all my files.  I worked with a Dell representative for instructions.  Yesterday we finished the installation.  But now I can't connect to the internet.  I tried myself to troubleshooting, but since I'm not well informed on the computer back and donts of installation, nothing worked for me.  Should I upgrade to windows?  Help, what do I do?

  Hello Akobash

  Most likely, you have not installed the drivers for your network card. Here is the link for the drivers for your system. You will need to select the arrow next to 'Network' drop-down list, and then select the network appropriate for your system driver. You probably need to register this driver on a flash drive or other portable media. Once you've saved it you can then insert the support in your Dell Dimension 4600, access media, then run the driver installation program. Follow the instructions on the screen to complete the installation, and if necessary, you may need to restart. After that the driver installation network and you can get online I suggest you only install other drivers for your system from the link provided. If you have any questions please let us know. Thank you.

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&CS=555&l=en&s=biz&OS=WLH&OSL=en&SystemID=DIM_P4_4600&CATID=-1&impid=-1

• computer does not connect to the internet after reinstalling XP SP2 wit

  After that the computer we reinstalled windows XP with SP2.  The operating system loaded fine, but don't can't get the computer to connect to the internet.  Went through all the steps suggested even check the Service Manager to ensure that the appropriate services are started.  Any help would be appreciated.

  Hi DamonBrigham,
   
  -What exactly happens when you connect to the Internet? You get an error message or error code? If Yes, indicate the same.
   
  -Do you have a cable or a wireless connection?
   
  If this is a wired connection, try starting mode safe mode with network and check if you can connect to the Internet successfully.
   

  Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.

  See this link for instructions on the boot safe mode with networking:

  A description of the options to start in Windows XP Mode

• Connect to Internet after reinstalling

  I had to reinstall XP Pro to my mesh recovery disk. (blue screen of death) Is no longer an icon in the network window, so I can't set up or connect to Internet even activate XP again. How can I fix?

  Hello

  You are probably just need to install drivers for your Ethernet card and perhaps other parts also. If you are not provided with a CD of drivers by mesh, you could be in trouble, mesh downloads site is not available, it was "closed until further notice."

  If you have the driver CD, it can "autoplay" and install all the drivers for you. If this is not the case, there is probably folders separated on the CD for each type of driver installation.

  If you do not have a driver CD, or have problems with it, let us know for more asitance. If you have the CD but can not get the drivers installed, please provide information on what you're trying and what happens when you try it.

  Tricky

• E1-571-33124G50Mnks Question

  I think of the upgrade of the qraphics/video card in my laptop but I didn't know if I can replace my current laptops video card, I was thinking about getting a graphics card GeForce for it, this would be possible? my laptop is an Acer Aspire E1-571-33124G50Mnks thanks!

  Why not?

• Acer Aspire V3-571, a continuous beep on startup

  Hello

  I have an acer aspire v3 - 571 that keep a beep on startup. I can get into Windows 7 by pressing "ESC".

  However, after I enter Windows and use my browser (mozilla firefox), the Web page is scrolled automatically at the end of the page. Despite manually by pressing the scroll bar and bring the scroll bar to the top of the page, just wedpage keep automatic scrolling at the end of the page.

  Initially, I suspect my wireless mouse was defective, but even after changing for wired operation smile, the problem persists.

  Now I am suspecting if the problem is the built-in trackpad or the built-in keyboard key 'END '. Please en; ighten me on what I need to do to solve the problem above.

  If it is a sound signal and go to page END...

  There are many more to check, take a look at your 'End' button, use a cloth with compressed air to clean up a bit.

• ACER Aspire E1-571 initialize problem.

  Hi everyone, I recently bought a new hard drive for my acer Aspire E1-571 gor because the old one (500 GB hitachi) "crushed". Then I did today, it's a WD scorpio blue 2.5 "320 GB. I have installed the new drive, run an installation of windows 7 x 64 ultimate edition of windows install I divided on 2 partitions, formatted and installed the system disk. Installation is completely normal and fast but the laptop keep coming at startup screen ACER logo then restarts after the instalator finished and did the final restart before you run the Windows for the first time and again and again and again to infinity so I reinstall windows once more and it's the same thing. After that, I got the new drive from the laptop and put it in another laptop of mine an Asus and windows proceeded to the desktop without any problem. So my question is what is the case, do I need a disk for acer hitachi because no other brand will not work with it or what? or maybe its a sort of Matherboard problem with the disk?
  Thanks for the help!

  Hmm, how about uefi? After a few readings in a thread, it seems that bios is one of messing around.

  see this link; http://community.Acer.com/T5/notebooks-netbooks/Windows-7-UEFI-install-on-aspire-E1-571/TD-p/50201

  or perhaps this, simple and could be much more useful, http://community.acer.com/t5/Notebooks-Netbooks/Installing-Windows-7-on-acer-aspire-E1-571G/td-p/930...

  some posts here might be useful (as I browse some of them, some say install win7 on GPT with active uefi)

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• Firefox 36.0.4 does not go to the internet after the release of sleep

  My FF won't go to the internet after the resumption of sleep in specific situations to my use of power cord. I have Windows 7 on my laptop. I'm using FireFox 36.0.4. I searched the problem and found a person of 2013 with exactly the problem and I can reproduce my problem the exact way of sames like this person mentioned in their support of Mozilla question. Unfortunately, there is no effective solution to this problem. My FF fails to answer some specific situations:

  It seems to be when I have my laptop plugged in while using FF. If I close the lid to put to sleep, when I reopen the lid it later, that it does not connect to any websites. I can click on things on the page, so it is not completely frozen. I can search on google, but it never connects to a page. It has circular availability icon and 'connection '. It is not stop search or give an error message. I have to close off FF and completely shut down my computer and restart to clear the problem. If I try just close Mozilla and again I get an error message "already underway but enforcement does not." the old process of FF must be closed before opening a new window", but I do not have an open window and regardless of how many times I close and try to reopen, I get this message even; If I don't have the power supply cord is plugged in, I don't think not that I have this problem.

  I met the same problem, but it happens on a desktop running windows 7 and not another desktop running windows 7 so I think that there is another question. I can sometimes get around simply refresh the page he fell asleep on with the arrow curved in the address bar but would like to permanent an easy solution.

• Desktop Compaq with Windows 7 no reconnect to the internet after the awakening of the mode standby

  Info on the computer: Compaq SG3-150SC desktop computer, processor is AMD Athlon (TM) II x 2 215 with 2, is 7 MHz, bios American Megatrends Inc. 6.01, 23.4.2010 SMBIOS version 2.6, RAM is 4 GB total. OS is Windows 7 64 bit edition Home premium + service pack 2.
  
  ON THE PROBLEM

  This problem has happened recently. Once I turn on my desktop mode computer "sleep", it cannot reconnect to the Internet and I use only cable internet which computer is connected via ethernet to the cable-internet-modem/router cable. The computer seems to be able to view all available networks, but she was never able to connect to the Internet (after waking up from sleep). At the same time that the computer seems to have slowed a lot, I have no idea why, but I guess he's trying to reconnect to the internet and this process of reconnection is devouring its resources.

  I had other problems with this computer during this past year the half, but will not go into great detail with them now. These problems have been losing some dll. file that was ment to display the Win 7 great/normal devices connected to the computer, and a total system crashes / freezes after having updated graphics drivers AMD ATI Radeon 3000. However these problems seem to have disappeared after Windows 7 service pack 2 update. Also, I scanned the computer several times with a well-known and apreciated overall software security, no virus or other major security problems have been found.

  The only problem that seems to have the computer right now is just this question, I am trying to solve.

  Any suggestions to check and make what?

  Hello:

  A few suggestions, you can try...

  1. install the latest driver W7 ethernet of the Realtek RTL8105E ethernet adapter to your PC.

  Download, unzip and run the application configuration of the 2nd on the Web page below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  2. go in Device Manager, expand network adapters device category.

  Left click on the Realtek ethernet card.

  Click the power management tab, and uncheck the box to allow windows to turn off this device to save power.

• Acer Aspire E1-571: current password for boot Acer bios menu

  Hello

  I'm using a computer laptop acer aspire E1 - 571 and I want to enter the boot menu by pressing F2, so he asks the current password that I don't know. Help, please

  Hello

  This is the HP forum, you may need this repost on the Forum Acer or communicate with their help, however, if you enter an incorrect password 3 times, you receive a stop code?  If you do, post back with the code.

  Kind regards

  DP - K