Acquisition of multi camera (USB)

Similar Questions

• Acquisition of multi camera (IMAQdx)

  Hello

  I failed to enter two cameras with the IMAQdx driver. For example, download the sample of "enter and select Mode.vi ', copy and paste a second loop for my second camera (see example).

  But the second call to 'IMAQdx Grab.vi' returns an error:

  "The error 1074360296 occurred at: IMAQdx configuration Acquisition.vi.
  Possible reasons:
  NOR-IMAQdx: resources for insufficient transfer (Hex 0xBFF69018) engine. »

  Sorry for the newbie question, but can someone help?

  Thank you very much.

  PS: I had this problem with the pilot "IMAQ for 1394", but it is no longer supported... I've improved the Vision Acquisition software to version VASAugust2010, do not know if my problem is caused by this upgrade.

  PetitOhu

  Must be a problem of bandwidth and you may need to reduce the size of packages.
  Looking for support OR with the term "inadequate transfer engine resources", you will find a lot of threads (I hope so).
  If this is not the case, let us know here.
  Guenter

• Camera USB LabVIEW 8.6 problem

  I'm new kind of LabView.  I'm working on a project of image editing, but I have problems with a camera USB and LV.

  I installed the NI_IMAQ file USB, I the NI Vision module.  I read the "NOR-IMAQ_for_USB_Camera_User_Guide", but I can't find that they use the numbers (fig. 6).  I imagine that the writer may have used a slightly different version of the LV, but I can't find anything in my icon palette that has a "USB Grab of acquisition".

  When work to aid the Vision Assistant, I am able to capture images of my USB camera so I know it works, I can not set up as a VI.

  Y at - he one day User Guide or matter who has a direction?

  Thank you for your time,

  -Rocky

  Hey, Rocky,

  Attached the files you're looking for...

  Andrey.

• Acquisition of data NOR usb 6008: a strange problem: mxwcgoutrunsilent.VI is not respected

  Expensive OR

  Today, I bought an acquisition of data NOR usb 6008

  and I'm using labview in 2011
  the problem is appear when after I end the process of configuration of the i/o data acquisition Wizard

  the following image shows the mxwcgoutrunsilent.VI is ignored and an error has occurred

  

  someone can help provide this VI for me

  What is the complete labview modules can also so I could do a real time data acquisition

  Best regards

  mangood,

  You received an error code? If so, what is it? What version of NOR-DAQmx driver you have installed? It seems your driver potentially incorrectly installed, and you may need to reinstall the driver.

  Here is the link to the latest version of the NOR-DAQmx driver: http://www.ni.com/download/ni-daqmx-9.8/4297/en/

• Imaq is for cameras USB driver always available? He can not find on the Web site of NOR

  Cannot find or-Imaq for cameras USB Driver.  Is it still available on the Web site of nor?

  Thank you

  Or here.

  Andrey.

• How can I change the default actions of what made the PC when I connect a camera, USB key, etc.?

  How can I change the default actions of what made the PC when I connect a camera, USB key, etc.. My Samsung intensity II is what I need it for; I want to shoot to the top of this window asking me what to do when I plug in, but one day, I was not thought and press on 'No Action' with the "always perform this action for this device" (or said something like that) checkbox checked.

  Once it is connected, go to my computer, and your camera photo or anything else that should be there.  If is isn't, it is a completely different issue.  It's done, right-click on it and select Properties.  Click the AutoPlay tab.  There is a version of dialogue enough of this "window asking me what to do."  You can figure out what to do from there.

• Multi camera: Z3

  Hello

  I have a compact Z3 and a Compact of Z3 tablet. Both have the multi camera installed function.

  However, when I allow it to touch their back to back, they are trying to connect for a long time, but nothing happens and finally a message to say that they are unable to connect.

  They are obviously grateful each other, but there isn't any multi-camera event.

  I tried three permutations:

  (1) multicamera beginning the Z3 compact and touch to the Table Compact Z3. This results in a long delay, then a pop-up on the Z3 Compact to say "Connecting to the Xperia" and a pop-up on the Tablet Z3 compact saying "collected a new tag: application/onlineremote ' which is repeated on several lines." Finally the Z3 Compact says that it cannot connect.

  (2) in reverse with the Z3 Compact Tablet first. Same again (1), just the opposite.

  (3) start the camera both application and select multicamera on both and then press them back to back. They try to connect and then eventually abandoned.

  Any ideas? I'm not as something exotic. They are the two models Sony Z3 with the default android on them and they have not taken root.

  Thank you

  Joe

  Hello

  So, an important update on that.

  I called Sony and they told me to delete the data files and the cache for the application of the camera on both devices. I did and it made no difference.

  Then they told me to factory reset the devices, how I've had enough of bad mood because I spent long enough to implement and Sony did not have a specific reason why this should solve the problem. I felt that it was somewhat a 'try this because we cannot think of another thing to tell you".

  Anyway, I didn't do that. What I did to, it's get to restart both devices over the next few days.

  Then I tried again, put the two devices in mode multicamera, before I tried to open the connection. And it worked.

  Thus, three options are available:

  • Reset the date/cache for applications.
  • Restart the device.
  • Retry the connection when the two devices are mode multicamera.
  • Or maybe just a combination of those three...?

  I hope this helps someone!

  Joe

• The camera USB driver

  My guard computer crashing, either go to the blue screen or gel so bad that I have to press the power button. Then windows troubleshooting tells me that the problem is due to a camera USB driver, but she doesn't tell me how to remove it. When I try to find this driver, I can't. Can someone give me some ideas on removing this driver? Please keep in mind that I am barely computer literate.

  Hello

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  If you still bluescreens then so tell us BCCode or Code numbers to stop.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Pilot the camera USB 2.0 Video 8 64-bit Windows

  Hello
  I'm having a problem with my webcam. I recently installed gesture control which darkens my camera, so I uninstalled the driver now I can't go back there. Even when I install a pilot Imaging it does not work and video/camera USB 2.0 driver is not yet on the list. Please help me to get the video/usb camera driver.

  Hi Sunny,

  I would need more information to help better understand the issue.  Please answer these questions:
  1. What is the brand and model of the webcam?
  2 do you have uninstalled the software of gesture?
  3. What is the brand and model of the PC?
  4. do you get an error message when you try to install the driver for the webcam?
  I suggest to install the drivers for the chipset of the website of the manufacturer of the computer.  Then, try to install the driver for the webcam and check.
  Please come back with information to help you solve the problem.

• Synchronization multi camera using points, but no point

  Hi all

  The question is quite simple:

  Can I synchronize two clips for multi-cam using the point in but but not starting from the point.

  I thought it should be a basic option, given that many times, I have a point a minute in the video sync, but I still need this minute in the sequence obtained from multi-cam.

  This minute to lose since the multi-cam sequence starts from where was the sync point.

  Any ideas?

  Use markers instead of points.

• Multi-cam editing - switch cameras

  I am currently editing a multiple camera sequence, but a right click and select camera 1, camera 2, picture 3 in the Drop Down

  It takes time to scroll to the bottom of the drop-down list, and pass in the source window slows down the machine a little

  Is there a quicker way to switch?

  Even a keyboard shortcut would be useful...

  Thank you

  There are actually a multi-camera set view. You can add buttons to your monitor, the program for access to these or access the view with Shift + 0. If you click the sign icon at the bottom right of your program monitor, you can add recording and one button directly on his right to switch to the display of MC.

  To turn the cameras with a shortcut, you can press the number keys 1-9, and to cut the cameras during playback you can add Ctrl modifier to these keys. You can go into control panel shortcuts shortcuts keyboard and see what multi-cam already exist, and add your own commands that are not shortcuts already assigned to them.

• How to make a Multi camera track is always visible?

  I'm working on a sequence of Multi cameras.

  Let's say I have 13 titles in there:

  • 12 tracks are actual video clips
  • 1 track made of graphical overlays (as in Formula 1 Racing, with stuff like positions of rank, drivers, lap time, telemetry, etc...). This track is imported from legacy and has in it's alpha channel. This track is at the top of all the other tracks.

  I want the graphic track to be ALWAYS on, regardless of which track I select in blocking.

  This path must be on the INSIDE of the camera multi sequence and I can't get out of multi camera (for reasons of synchronisation).

  No idea how to do it?

  Some screenshots to clarify what I mean.

  Here's my multicamera Setup:

  

  Here is the final result. You can see the graphics overlay on video.

  

  It is not possible.  You need to place the chart outside of the multicam sequence so that it is always visible.

• First film edited with Premiere - proxy, audio questions and multi-cames

  I have several questions that I have not found in the videos and forums, at least not for my situation. I'm finishing the revision of sequences now adding comments in prelude and will begin soon to change it. Please excuse the long post.

  Background:

  I'm working on my first film, a documentary. Most of my work is 10-11 interviews, about an hour each. The majority is 4K Panasonic GH4, but some of the images is an Olympus MDGS EM5 II 1080.

  I recorded the sound using a LAV and a shotgun microphone, each goes in its own channel in a Tascam DR - 70 d, an external audio recorder, with a line going into the camera for reference. Audio and video files (at least one, since GH4 brings several) will have a slate tone to the head, created by the audio recorder. The recorder has captured the audio 24-bit, 16-bit audio captured camera. The recorder fooled also two other channels to lower 12db audio in the case of audio peaks.

  I will be changing on Mac laptop - 2013 MacBook Pro, OS 10.11.5, 2.9 Ghz Intel Core i7 memory of 16GB 1600 MHz DDR3, NVIDIA GeForce GT 650 M 1024 MB graphics card. I think I need to create my images 4 K proxies.

  All images is storage on my external drive of G. The interviews are separated and are located in the folders of each interviewee.

  The final project will be 1080, not 4K.

  Questions:

  Naming - being a hybrid, the GH4 breaks an interview of an hour in several separate files. Should I change the names of all files, or keep them in folders named in Premiere Pro? If I should change them, should I do it before swallowing?

  First synchronize audio and video, but since I have an audio file and several video files, I synchronize each video file individually or assemble them somehow, then synchronize? If each of these excerpts from the interview is sewn together, wouldn't that make editing more easy?

  When you create proxy for video files, also create proxy for audio files separate? Once synchronized, will be presented first the Hi output version of the resolution of the video and audio?

  Multicamera - in one case, I have an interview with two 1080 cameras. But for the rest, I've shot with a camera in 4K, so I intend to use a section cropped interview (zoom) when an important statement is mentioned, simulating a two cameras set up. Given that I have to create a sequence of multi camera after I ingest proxy files, first will be a problem activating/deactivating files proxy for the salvation of the res files?

  B - roll is added later, once the interviews are published about. It will be a few (not 4K) images and photos. Make the proxies of these too or first care to have all files proxy or a mixture?

  Finally, I have never edited a video which has been more than 10 minutes. This film could be of 40 minutes or up to 90. Everything I need to know to make the editing more smooth? I am a beginner!

  Thank you for bearing with me and thank you in advance for any idea!

  -SK

  1. allow only file names.  Make your organization with records (hard drive) and ferries (project).

  2. Manual of multi-camera method

  3. the audio files are small and will not need of proxies.  Export will always use the original media.

  4. possibly.  My first attempt was a disaster that froze the machine so badly, I had to do a hard reset.  However, you need not go back to the original of the sequence to make your cut-ins.  Proxy media will do fine work.  Simply place a copy of the plans at the 50% level in V1 and a second copy on the scale of 100% in V2 when creating the source multicam sequence...  Will allow you to see the full versions and then cropped the multicam editing.

  5. the photos no need of proxies.  If the B-roll change, make proxies for those.  PP not care a spirit to keep all the images the same.

  6. $ 2,000 custom PC vs $ 4,000 Mac Pro - YouTube

• All clips in my sequence of multi camera went black

  After spending a long time, editing a sequence of multi cameras, all the clips have now gone black. The waveform has disappeared, but the audio is not yet. Other clips on the same timeline, including another sequence mulitcam all seem to be good and I can't identify exactly where it happened in what concerns the measures I did.

  The last element in the sequence multicam has diagonal white lines through it. I don't know if this is related? Online forums suggest it's something to do with the insufficient media, but I don't really know what that means. The camera angle ends before the other, it's the only thing I can think of that would cause the white lines.

  I have attached some sceenshots I hope clearly the question - can anyone help? I'm desperate: I lost several hours of work! Thank you!

  I have it solved! (With the help!) It turns out that the original source multicam file has been deleted. I was able to return to a previous AutoSave and import it into the current version of the project and add a link to my sequence for it. So relieved to have solved this problem without having to re - edit. Thanks again for the help!

• I have a sound of HUSH with one of my multi-cam sequence

  Hello, can the French guy with poor English here, you help me?

  

  It's my 'main sequence' (I call it "Montage"), left I got a subsequence multi-cam of an interview, everything good about it but right, I also had a subsequence multi-cam of an interview and the sound is horrible, as you can see.

  Two days before I have had no problem and today when I load the project, I got that.

  To see what I have and I go to the sequence:

  

  No sound problem, not DAVID.

  Of course, I tried to recharge my project, restart the computer, load the project on another computer, but none of it worked.

  I have an old auto-save where I don't have the problem but I did a lot of things since...

  So if anyone has a solution or something I can try please help me .

  Thank you

  Try this:

  1. close the Premiere Pro

  2 delete the Cache files.

  3 Rename the folder containing the media.

  4 put updated to 2015.2

  5 reopen the project and link it to the media.