Activate button used
Hi all..
As a beginner with Labview, I was very happy to have these forums to help me with many questions, other positions.
Although this time I could not find an answer, so here.
I'm a VI that will allow me to send messages SMS from my computer. My computer is connected to a GSM modem, and there's a Subvi, which controls the serial connection.
The problem I have now is that my button to send orders (the one that activates the structure of my case) will not activate. I tried to add a LED to see if that would show anything, but it made no difference. The LED is not turning on.
Basically what I do, is I have a textfield for the number of beneficiaries that adds "at + cmgs = + 45 ' in front of her and the ascii value of hex 0 D after her. Then a textfield for the message, where I add the ascii value of the hexagonal 1 eventually has to send.
This configuration works in smaller steps, like Sms_Send3, but it is Sms_send5 that I have problems with it.
Any ideas? :-)
Edit: Minor typo fault
Edit: If I add an indicator to the while loop, it seems that while the loop is not running at all?
I realized I could do what I wanted to do with a sequence...
It's a little embarrassing for having discovered it was something so simple.
Thanks a lot for your help though guys... Appreciate it :-)
Kind regards...
Tags: NI Software
Similar Questions
-
&; quot; Click here to activate and use this control &; quot;
I have a few animated flash buttons on my web page and they used to work properly. However, recently I am getting an error of Explorer 6 sp 2. When I rollover the text, I get a rectangle around the text, and a message that says "click to activate and use this control". I don't get the same error with Firefox. I mucked with the security settings, but if anyone knows just--I'm tired and want the answer.
Signed,
Stay - home-mother who used to be a geek!It is not strictly an error message. This is the new feature of IE
(presented in the Update April 2006 for IE6) to comply with a decision
against the Microsoft patent infringement.It is raised by the
-
Press SPACEBAR or enter to activate and use this control
I get this in my browser (IE 6.0) each time a load flash presentation "tap on space or enter to activate and use this control" none of the buttons on the flash presentation will be working until I click on the presentation or success. Is this a setting? Anyone seen this before?Yup - pretty everyone who has updated to windows in the last months of couple and this forum a bit
hundred times :)Type "enable control" in the search.
290 previous threads.also, www.Google.com returns I think more 1 million :)
******************************************
--> * Adobe Certified Expert *.
--> www.mudbubble.com
--> www.keyframer.comNetBossUSA wrote:
> I get this in my browser (IE 6.0) whenever a flash presentation support
> "Press SPACEBAR or enter to activate and use this control" none of the buttons
> on how flash will work until I click on the presentation or success
> enter. Is this a setting? Anyone seen this before?
> -
Where is the button 'Use small icons' customize the toolbar (or equivalent) passed?
I think my toolbar is taking up a lot of screen space since I installed Firefox version 29,0. I want like to screen for web pages space that possible but have still my toolbar is accessible at all times. Is it possible to do what the button 'use small icons' in the toolbar Customize with some other (hidden) setting? I don't mind if it crops up and down "big buttons.
I read something about a 'Restorer of classic theme", which is the only recommended way to go for now?
--
Thanks for a great web browser, I use it as my main browser since version 1.0.x.Thank you, but that does not make the icons smaller in size as the old way, used to work.
I try the extension Classic theme restaurant to see if it will fix it. So far, he seems to have a bug that I informed the author.
-
I just updated my iPad and it told me to activate it using my Apple ID. I entered my Apple ID and it will not work. Help please
There seems to be a problem, especially with older devices. And I guess that's the end of Apple since it affects both.
You can try to use iTunes to restore your device from a backup
http://support.Apple.com/kb/HT1414
Or you could wait it out and see if Apple fixes things.
-
Satellite P755-S5393 - cannot activate wireless using Fn + F8 keys
I have Toshiba P755-S5393 (PSAY1U-05W027) itfacing WIFI problem is not activate using the Fn + F8 keys.
Initially I was facing problem with auto power-off, I diagnose and disconnection of the electric connection of the media Panel since then my wifi is not activate even using the Fn + F8 key combination.Solutions and suggestions are welcome!
Aamir Malik
Hi Aamir Malik
Satellite P755-S5393 has been preloaded with Win 7.
If you still use this system, you should first check if the other next to the combination FN + F8 function keys work correctly.
If the keys n t work, you must install additional Toshiba as software
TOSHIBA Value Added Package and Toshiba Flash cards support utilityDrivers & updates for this model is located on the Toshiba USA support page:
http://support.Toshiba.com/support/modelHome?FREETEXT=3167433Where only the combination FN + F8 does not work, I recommend reinstalling the WLan driver.
-
How to activate and use the built-in webcam
built in webcam
How to activate and use the built in webcam on my desktop Dell Inspiron 1?
MikeViklund,
Try to read...
Use and troubleshooting of the Webcam Dell and Dell Webcam Central Software
Rick
-
I'm running out of black ink, can some 1 Please tell me how to activate the use of the colors that I have left
Read the printer manual or contact the manufacturer's technical support. MS does not print.
-
How to activate Bluetooth using the switch wireless on dell inspiron 3542
When I try to install dell WLAN and Bluetooth driver, it seems "activate bluetooth using the wireless switch". My laptop 'Dell inspiron 3542 run ms windows 8.1. Please help me!
How to activate bluetooth dell 3542
-
How to activate Bluetooth using the switch wireless on dell latitude e6420 (early 2011)
When I try to install dell WLAN and Bluetooth driver, it seems "activate bluetooth using the wireless switch". My laptop "Dell Latitude e6420 run ms windows 8.1". Please help me!
Your variant of the system doesn't have the Dell Wireless 380 card and that's why it will fail to install.
Install.
A21 OF THE BIOS:
http://downloads.Dell.com/FOLDER01853317M/1/E6420A21.exe
See notes about the update of the BIOS http://dellwindowsreinstallationguide.com/updating-the-bios/
Free fall sensor:
http://ftp.Dell.com/FOLDER01679418M/5/St-MICRO_FFS-LNG3DM_A06_V6681_setup_ZPE.exe
Intel Chipset Device Software:
Intel Management Engine Interface driver:
http://downloads.Dell.com/FOLDER01232584M/2/SWB_DRVR_ME7P1_5M_7_1_70_1205_MR_A05_SETUP_ZPE.exe
O2 card reader Micro:
http://ftp.Dell.com/FOLDER01481873M/1/Chipset_Driver_CY8D1_WN_3.0.08.18_A01.exe
Utility Intel Identity Protection:
http://downloads.Dell.com/FOLDER00705710M/1/Chipset_Driver_NGH46_WN_1.2.27.0_A05.exe
Intel Wireless N-6250:
http://www.Intel.com/support/wireless/wtech/PROSet-WS/sb/CS-034041.htm
Intel N-6250 Bluetooth:
http://www.Intel.com/support/wireless/wtech/PROSet-WS/sb/CS-034060.htm
Touchpad:
http://downloads.Dell.com/FOLDER01669864M/1/Input_Driver_VW486_WN_8.1200.101.134_A07.exe
Audio
Integrated
Driver Intel Ethernet:
Intel Video:
Video NVidia:
http://www.nvidia.co.UK/download/driverResults.aspx/80210/en-UK
Intel Device Manager Diagnostics utility:
http://downloads.Dell.com/FOLDER01433785M/9/DIAG_Network_Intel_A09_x86-6DDVX_setup_ZPE.exe
Application of Control Point System Manager:
http://downloads.Dell.com/FOLDER35332M/1/APP_WIN_R312259.exe
Let me know if all errors remain in Device Manager.
-
BlackBerry Smartphones Can you activate and use "BOLD" on Verizon?
I have a storm and wishes to buy a "BOLD" If there is a way to activate and use all the features on Verizon. Is this possible or should I expect for the "BOLD" on Verizon?
Is not possible, the blackberry "BOLD" is only GSM and Verizon CDMA network
-
plugged an external mouse and now the keys and mouse pad do not work. in the properties it shows activated but the Activate button is not active.
You can start in safe mode and restore the system.
-
You cannot activate and use CANON Image Browser EX
Title: CANON original Image Browser EX
01/03/2013
Windows 8 (no touch) HP Envy 23 all-in - One PC.
Trying to install CANON Image Browser E.G. IBXW_INST_1_1_018_U02_9L. I get 'Image Browser EX icon' on the desktop. When activated it will be single charge to 80% and then stall. I installed Microsoft Silverlight 5 - followed to uninstall MS Silverlight 5 - new reinstall MS Silverlight 5.
Several times I get the message "Silverlight 5 cannot be installed correctly.
"Edge".
GeraldSchuler
Hi GeraldSchuler,
Thank you for choosing Windows 8 and give us the opportunity to help you.
After the description of the question, I understand that you are unable to activate and use CANON Image Browser EX which you have recently installed on the computer.
Don't worry. We will certainly help you to solve the problem.
I suggest you to follow these steps to solve the problem of installing applications and check.
Step 1:
I suggest to uninstall CANON Image Browser EX, then run the patch for uninstall of an application and then install the applications and check. Here is the link to run the fix it.
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/program_install_and_uninstall/
Step 2:
I suggest to uninstall Silverlight 5 and then install it by following the steps in the article. Go through the link for your reference.
How to clean a facility damaged Silverlight and then reinstall Silverlight
http://support.Microsoft.com/kb/2608523?WA=wsignin1.0
If you have other questions related to the installation of CANON Image Browser EX or Silverlight, feel free to get back to us. We will be happy to help you.
-
I had 12 installed elements on my pc, I bought a new pc and re installed elements 12 on it. When I opened the items I asked me to connect to adobe account that I did successfully, then it says activate now so I clicked the Activate button and nothing happens.
Hi Jeff, sorry that I'm never home, I discovered that my copy I bought brand new online is already registered on behalf of a person... Adobe say there is nothing they can do, but it was already installed on my pc, I wanted to re install the same copy in a new computer anyway, I now have the PSE13 but I thank you for taking the time to answer
-
How to put a tooltip on a button using FXML?
Hello!
JavaFX 2.0 is really new to me, and I'm still learning. Anyone know a good tutorial FXML? I need to put a ToolTip for a button using FXML, but I don't know what to do, does anyone have examples?
Published by: user5836730 on 11/11/2011 20:03
Published by: user5836730 on 11/11/2011 20:05Here is an example:
The documentation is available here:
http://download.Oracle.com/JavaFX/2.0/fxml_get_started/jfxpub-fxml_get_started.htmIf you found my answer helpful or correct, you must mark it as such
Maybe you are looking for
-
Why is there no other choice "45 minutes" to the title of travel time?
I like the ability to add travel time to an event, but I am frustrated that I have to choose between 30 minutes or an hour. 45 minutes would be ideal, but it is not included in the selection. Why not?
-
Re: Satellite A660 - 12 p - can't find the right poster driver for Win XP
Hey everyone, I need help with this one: I have a dual boot Win7 (x 64) / XP (x 86) on my laptop, but I can't find the right poster drivers for compatible video controller VGA on XP. Anyone know where I can find them? Thank you very much
-
No audio device installed in Acer Travel mate
Acer travel mate 4060 * upgraded to 2 GB of ram and windows 7 32-bit Home premiun has just been recovered from an accident. I send you this message from the same computer. My speakers do not work. However when I connect an external speaker with USB c
-
How do I use the built in webcam on my computer laptop gateway?
I have no idea how even turn on the webcam. I don't know even where to find the software for the webcam. I tried to use Skype and that no longer works. Is there anyway that I can fix this?
-
Hello Just got my lenovo u400 today and super excited, however, the screen doesn't seem to work! When I turned on for the first time, I heard it starts but the screen is completely black. I try to use the shortcut key to adjust the brightness, but st