active view - in the update Hotmail is terrible

Similar Questions

• Incorrect paths for active content after the update of the models

  When I apply a new model with a page in Dreamweaver CS3 all links updated correctly with the exception of any content active. The paths of active content (files .swf) point to the correct locations. The paths to the files remain the same, as if they were always pointing towards the model. All other links and paths are updated properly (images, links), but not the Flash. Everyone heard talk of this problem/bug? I just can't understand why it's happening.
  I must add, however, when you open a new document from the template links ARE correct. Only when the application of the template to a page, or when I update the model and update the pages associated with it that happens. Am I missing something?

  Thanks Murray. Who did the trick.
  I guess I'll use only the paths relative to root for the insertion of these objects in the future.

  Detective Conan!

• Tried the updated software: your ipad could not be activated because the activation server is unavailable tempoarily

  Received error msg after trying to upgrade to the latest version of the software for the iPad.

  Your iPad could not be activated because the activation server is temporarily unavailable.

  What is the problem have never had a problem with the update of the software before.

  There is a problem known/glitch with Apple activation servers.

  Apple, I think, has recognized and acknowledged this problem with difficulties with some models of iPad activation server and have stated that they are working on this issue and it will be resolved as soon as possible.

  I hope more early.

• Cannot complete the update of iOS for my iPad, the "the activation server is temporarily unavailable" message keeps popping up? Suggestions as to how I could complete the activation?

  Suggestions as to how I could complete the activation of my iPad after iOS update?

  I tried for 2 days now to complete the update of iOS on my iPad. Everything was going fine until activation, as I tried to continue, the message "your iPad could not be activated because the activation server is temporarily unavailable" keeps popping up. If anyone has suggestions as to how I could complete the process?

  Thank you.

  I have the same problem with you. There is no suggestions now. It seems that the problem exists only on the IPad 2

• After installing the updates, event viewer says "Some of the updates are not applicable for this system"

  I have a laptop Toshiba Satellite L355D-57901.  I am running Windows Vista Home Premium SP2.  I have the updatedWindows updates in place so that I can revisit before installing.  After you install the updates, I noticed for some time that when I check myEvent Viewer , there are several errors indicating that "Windows Servicing identified that package (the number of update i.e. KB980436 (security update) is not applicable to this system .).   Can you please tell me why?  Thank you very much.

  Hi Simply4real,

  Check out the link below to a thread with similar problem and check if it helps.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/c6883a0c-FF12-4bcd-86e0-4af3006eb7ce/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I activated the auto updates. When I take the update it says in the center of the page "the page failed to load".

  I activated the auto updates. When I take the update it says in the center of the page "the page failed to load".

  I tried to take different paths, as via the Control Panel, but it's the same thing.

  Operating system?

  Try the following: -.

  Open search Vista Start Menu Bar and type: RUN

  Click OK

  Type the following lines, and after each one, click OK: -.

  regsvr32 jscript

  regsvr32 vbscript

  regsvr32 /i mshtml

  No guarantee

  TaurArian [MVP] 2005-2010 - Update Services

• Updated - where is view the updates available? It seems so gone

  So I did not open the Windows Update window as... a month. This isn't saying it has not updated. Things were pretty darn run automatically updates each morning apparently, when I got the value every Tuesday (which I went and put it like that once again), but not after that I noticed that Windows Update design is different.

  Now I'm referring ot the control panel > Windows Update thing. Before when I used that, it would show a list of the updates, if recommended, important, or I think he said 'Optional' for others. He'd jump upward to updates on everything, even my Nvidia graphics card, I liked because I could see what updates for everything that I needed.

  Now when I go to Windows update, I can't find that page/area. I think I was clicking on view available updates, or whatever...

  Because I was actually about to get all the updates for my Nvidia and other things that it listed there, and since he has been through windows update I trust more what to say, going to a website and download what it says, it would be, but windows update is not displayed it more.

  Halp plz? D:

  Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  Assuming that Vista SP1 or SP2 with the Windows Update Agent 7.4.7600.226 installed, try Control Panel | System and Maintenance | Windows Update | Look for the updates or Select updates to install

  See pictures before and after Installation of Windows Update Agent 7.4.7600.226 (compliments of Update Services MVP TaurArian) here: http://taurarian.mvps.org/Screenshots_Vista/before_and_after.html ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error manually running Windows updates "the website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem.

  Original title - manual update of Windows XP via "Windows Update" fails

  07/01/14: click on "Windows Update" on the desktop (XP Home) and XP Tablet

  Result: 'the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. »

  This office has begun on about 3 days ago and just this morning appeared on the Tablet

  I do McAfee and Microsoft updates manually every morning after the startup of computers so that they will not automatically be updated when I'm busy with other things

  I suspect that the McAfee via Verizon security package is the culprit since the 'look' of their package and procedures changed end of December

  Since then, they have had updates almost every day

  And around the same time, my problem appeared on XP Home Edition, I was not able to access Adobe PDF files and had to re-download Adobe Reader XI

  Any body else having the same problem?

  And help get the update of Windows XP to run again?

  It would not be the first step to disable automatic updates in Control Panel and manually download and install the most recent cumulative security update for internet explorer since without first, everything in the way of troubleshooting will be futile?

  Download and install the latest cumulative security for IE8 update and manually restart the computer.

  visit windows update via the shortened link in your Start menu.

  Assuming that you have Win XP SP3 and IE8, it will be the necessary file

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

• Error "the website has encountered a problem and cannot display the page you are trying to view. "Error number: 0x8024400A" when you try to install the updates

  Original title:

  I just reinstalled Windows XP on a laptop.  When I click on Windows Update in "all programs" selection, I'm headed on the update site, but I get this "the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. "Error number: 0x8024400A" is it an express update or Microsoft update.

  Hello
   
  Method 1:
   
  Run the fixit available at the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 2:
   
  Check out the following link.
  Windows Update, on new installation 0x8024400A error
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-error-0x8024400a-on-clean-install/4c79d20d-A4B3-4724-A6D8-4a768559038a

• I join just plu hotmail, but I would not cancel the update.

  Original title: hotmail plus

  I join just plu hotmail, but I would not cancel the update...    I'm really sorry for my miss point. I used MasterCard payment for the service, but you can the money used for your gift.  I just need close updated.sorry always nice to know that your company is help me.thank so. my homepage is msn.thank see again you

  * E-mail address is removed from the privacy * Thank you because we use hotmail.

  After all the Hotmail issues in the appropriate forum found here:
  http://windowslivehelp.com/

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• The operation did not complete because the disk management console view is not updated.

  Disk title management error: Windows 7 original by adding a drive letter
  Well, I don't know why this is happening, but if I try to add a disk to my windows system, it will not automatically add a drive letter, but it will add a drive letter to my USB and USB external drives without problem. It's just when I plug it in sata he's going all wobbly. I see the HARD internal disk in disk as a disk, but windows disk management Refuses anyway shape to add a drive letter, even with diskpart automount enabled. This is the error I get when I try:

  "The operation failed to complete because the disk management console view is not updated. Refresh the view by using the refresh task. If the problem persists close the disk management console, then restart disk management or restart the computer. »

  Absolutely nothing works. I tried Diskpart, acronis, AOMEI, EausUS, chkdsk, sfc/scannow, Microsoft fixit. Nothing works to get the drive Manager to add a drive letter to an internal HARD disk. Like I said, sticks and USB drives are no problem. I looked all over Google and I have not seen one solution to this problem short of a total erase and start again, and at this point, I'm not be done with everything I installed and might have to reinstall.

  I have other systems that do not have this problem. Just this one windows 7 install x 64. Can anyone shed some light on why this happens and how to fix it or if there is even a fix for it.

  Thank you

  Methadras

  Just to follow and finish this, the old MAIN drive has had some problems and was

  continues to worsen, it ends up by crashed.  scannow revealed some Windows system

  Files were corrupted and could not be repaired.  After the crash, I used the blank hard disc 500 gig

  and did a restore of the system since the disks created with the purchase and restored the system to

  "DAY 1".   Yes all the data and installed programs are missing, but I reinstalled my software.

  Adding external or internal disks worked without any problem now.

  I created a Windows 7/64 system repair disc.

  I created an Image of the system.

  I have a backup plan.

  I do the scheduled backup.

  I learned a lesson...

  Joe_T45

• View of the Disk Management Console is not updated.

  I use win 7.
  I tried to change the size of the disk by using the magic of the partion and it failed. He asked me about a wrong address, and I click on continue (I guess he's changed the logical address).
  Now I can't see my partion (D) to the workstation.
  When I run windows disk management and try to change the drive letter, it is said: "the operation failed to complete because the disk management console view is not updated. Refresh the gwendoline by using the refresh task. If the problem persists close the disk management console, then restart disk management or restart the computer. »
  I tried with windows Diskpart to mount the partition but I can't. If I have the volume list, it shows me only (C), but if I list the partition, then it shows me all the 3 partition:
  Partion 1: OEM
  Partion 2: primary
  Partion 3: primary
  but I can't access partition 3.

  Hello faithful,.

  Have you tried to use other third-party programs to "manipulate" the discs?  It seems that even if Palcouk $ million question with is it compatible, so I shot to the top of Partition Magic site and see the this PM 8 is not compatible with Windows 7.  I would try to see if you can access the partition from the command prompt, but I promise that would work.  Have you created a backup of your data before you do?

  I would say go to the link below and post a question with the community to see if you have viable options to recover from this.

  PartitionMagic 8.0 system requirements

  http://Service1.Symantec.com/support/PowerQuest.nsf/docid/2004050716123662?open&docid=2004050712232662&NSF=PowerQuest.nsf&view=6c360f88152ecfce88256e91005066ac

• Materialized view automatically refresh? If the updating of the means how?

  Materialized view refresh automatically? If the updating of the means how?

  It is expected is not to ask questions of the basic documentation.

  Refresh Options

  When you define a materialized view, you can specify three update options: how to refresh, what kind of update and can trust constraints be used. If not specified, default values are considered as ON DEMAND , FORCE , and ENFORCED forced respectively.

  The two execution modes are ON COMMIT and ON DEMAND . According to the materialized view, you create, some options may be unavailable. Update modes are described in table 8-4 .

  Table 8-4 Modes of discount

  Refresh the Mode	Description
  ON COMMIT	Refresh product automatically when a transaction which changed one of the paintings of the materialized view's retail is committed. This can be specified as the materialized view is quickly updatable (in other words, no complex). The ON COMMIT privilege is required to use this mode.
  ON DEMAND	Refresh occurs when a user manually executes one of the procedures available refresh contained in the DBMS_MVIEW package ( REFRESH , REFRESH_ALL_MVIEWS , REFRESH_DEPENDENT ).

  http://docs.Oracle.com/CD/B28359_01/server.111/b28313/basicmv.htm#i1006193

• I downloaded the latest version of the DNG Converter Camera Raw version 9.1.1 for windows. However, I get error install the update saying "error opening file for writing. Also on my help menu updates is not active?

  I downloaded the latest version of the DNG Converter Camera Raw version 9.1.1 for windows. However, I get error install the update saying "error opening file for writing. Also on my help menu updates is not active?

  If the installation program itself fails to open and run. Download it again maybe your current download is corrupted. Also, what OS you are using and you are an administrator with permission to install.