Add on your HP printer connected account failed

Similar Questions

• error message ' Add printer. Connect to the printer. Windows cannot connect to the printer. Operation failed with error 0x0000007e"___Any ideas?

  trying to access a lexmark printer installed on xp based computer from a laptop running windows7 via a local network.  Although the network is configured correctly, when I run the Windows printer installation I get an error message ' Add printer.  Connect to the printer.  Windows cannot connect to the printer. Operation failed with error 0x0000007e"I just upgraded to Vista by using the upgrade Acer and had the problems that Windows tried to download the drivers from Lexmark-, but could not. [the same lexmark printer and the configuration worked without any problems before the upgrade on this combination of machines running vista and xp].

  I had a similar problem when I tried to connect to an hp printer that used a Vista driver. Could do this test? Download Windows 7 driver from Lexmark, install it, and then try to connect to the printer again. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• my Macbook just stop to connect to one of my yahoo email (failed connection) accounts can I connect on all my other devices

  my Macbook just stop to connect to one of my yahoo email (failed connection) accounts can I connect on all my other devices

  Delete and re add the password for that account or delete and re add this email account.

• "Unable to connect to the printer. Operation failed with error 0 x 00000866", setting up a network printer

  Title of the Moose: error 0 x 00000866

  I have a laptop with windows 7 Professional.

  When I try to install a network printer I always get the message "cannot connect to the printer. Operation failed with error 0 x 00000866.

  What can I do to fix this

  Hi ETPM.

  You can try the following steps and check if it helps.

  Method 1:

  You can try to start troubleshooting printer and check.

  Check out the link:

  Open the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  Note: You can read this article and try to proceed as for Windows 7 also.

  Important: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow the steps in the link mentioned above carefully. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/windows7Back-up-the-registry

  Method 3:

  If the fix above is unable to get the printer working on your client machine to vista, so I suggest to follow the steps mentioned by Afzal Taher as of Friday, December 18, 2009 02:00.

  http://social.answers.Microsoft.com/forums/en/w7network/thread/954c4b9d-2F4C-4b1b-8fb6-49204ed96dfc

  Also check out the link:

  Install a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• You do not have sufficient access to your computer to connect to the selected printer

  I am a beginner to the field. I have recently installed windows 2008 standard edition and create a user and the user even working in the environment field. How can I installed printers installed on the servers. Whenever I click on any printer share the error comes from "you don't have sufficient access to your computer to connect to the selected printer. Client computers is teacher of Win Xp (Sp3) and the printer Kyocera FS - 1030D. Please go back. Waiting for your answer.

  Hi Shiju_Ganga,

  Your Windows 2008 server question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/winserverprint/threads

• OfficeJet J6450 - printer connects wireless but does not print job cable modem replacement

  Material: My printer is an OfficeJet J6450. I am running Windows Vista, current update.

  Probably triggering the event: I replaced my modem docsis 3.0 with a doscis 2.0 modem. PSI has remained the same. All other software and firewall remained the same.

  Dysfunction: After the replacement of cable modem, I found that I could print is no longer in my HP OfficeJet 6450. I would get an error in the printer window ' error - print. "  After the reboot after the publication of the initial error, I would get the error "error - sent to the printer.

  What I did:

  As a first step, I've uninstalled and reinstalled the HP software for the printer (complete package with exception of PhotoSmart and HP customer monitoring program).

  Use the connection for the network printer wizard, I entered the router password wireless to the printer. At first I don't have a connection. Then I rebooted the computer and the printer. I also returned to the default setting of network on the printer and repeated the configuration of the network. The connection was finally successful.

  The automatic test of the network page and the network printer wizard confirms the connection. Digital display of the printer and the HP diagnostic utility has also confirmed the connection. But the diagnostic utility is unable to print a test page and throw an error - "Print Test failed.

  The result disappointing:  I still can't anything to print wireless.

  ... Thanks in advance for your suggestions to get my printer back on...

  Go to start > Control Panel > printers and delete all instances of the printer.

  Then re-add the printer:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.  Get IP address of a Test of Netowork wireless on the front of the printer (usually in the network menu).
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• I get a 'Secure connection' error failed with google stating "certificate contains the same serial number.

  When I click on a link to a google search, I get the "Secure connection" error failed in Firefox. He says, "please contact the administrator of the server or email correspondent and give them the following information: your certificate contains the same serial number for another certificate issued by the certification authority."

  I followed the instructions here:
  https://support.Mozilla.org/en-us/KB/certificate%20contains%20The%20Same%20serial%20number%20As%20another%20certificate
  and looked at this article:
  https://support.Mozilla.org/en-us/questions/1028103?ESAB=a & As = AAQ

  I uninstalled and reinstalled Firefox, deleted the entire folder profiles and reset Firefox. I see that the older (orphans) article points to my router. However, I have a new router and have updated their software. There is no button to add an exception (as stated in the article), so I can't just work around it. This problem does not occur with IE, so I have a hard time to believe that it is my router.

  How to solve this problem? I really want to change browser.

  Finally, I tracked the issue. The answer was found here:
  https://support.Mozilla.org/en-us/questions/1028985

  It turns out that Avast has a web shield that passes through its own verification of certificate https. Of course, this feature is not quite right and loses track of the certificates. Disable "https scanning" in the settings of Avast resolved the problem.

• Laptop computer connecting to the printer connected to the Airport Extreme

  I will soon buy a MacBook Pro laptop and I'm interested in the way in which I connect to the printer connected to my iMac through my Airport Extreme.

  Unfortunately, you don't specify how the printer is connected to the iMac, but let's guess that's via USB.

  On your iMac...

  Open the preferences system (gear on the dock icon)

  Open the share

  Enter a check mark in the box next to printer sharing

  Close the window

  Now, do the same for the MacBook Pro

  Then, open Preferences system again on the MacBook Pro

  Click on printers and Scanners

  Click the + to add the printer to the MacBook Pro

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them

• OfficeJet Pro 6830: Remove old HP printer connected

  I just received and installed a 6830 JO reconditioned to replace under warranty.  I want to remove the old connected HP printer, but REMOVE PRINTER link is grayed.  Any suggestions?

  Hey @racerbrb,

  I see that you have some problems with the removal of your old connected HP printer. For this issue, you will need to contact HP Cloud Services directly. You can do this by clicking on this link and fill in the form below. If you have an instant account of ink that has been saved to your original printer, make sure you leave the chat or phone agent know immediately so that you get to the correct service.

  Please let me know if they are able to help you with the removal of the printer. If you get all solved, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Why can't I create a Microsoft Connect account using the Safari web browser?

  After that I created an account in profile MS asked me to create a MS Connect account that does not succeed. Is this because I use Safari as my browser, or is it another problem?

  Hello

  1. Was there any error code or message displayed during the creation of the account has failed?
  2. What version of Windows is installed on your computer?
  Try to use Internet Explorer and verify. If you install Internet prefered then refer the link, download and install Internet Explorer 9. Check if the problem persists.
  http://Windows.Microsoft.com/en-us/Internet-Explorer/downloads/IE/

• not printed; print head alignment failed

  I bought a printer HP 6700 Premium last summer (2012) and made a montage for use by WiFi connection to my laptop Dell Inspiron 1700.  The printer worked fine for 2 months, he was used before packing away until may 2013.

  To start using again once I got an error message regarding the Set up ink cartridges.  Assuming that the cartridges were parched of non-use, I have bought/installed HP 933 XL (color) and 933XL (black) ink cartridges.  All indications from the printer indicates that the cartridges are installed correctly, and that all are new/full shells.

  The printer continues to not print under the orders of the normal print or with orders queue on the printer for reports such as the 'printer status', 'Print quality', etc.  I also asked 3 times the printer functions "align the print heads", with a message of continuation of the print head alignment failed.  Show based on the "clean printhead" printer (twice) also failed to solve the problem.  When producing a page using above mentioned orders, the paper emerges with images very low (and widely dispersed).

  I'm not a person technically the inclined and would be very grateful if anyone could advise on the potential problems noted, and suggestions for the resolution of it.  Thanks in advance for your response (s).

  Hi Plapen,

  Can you double check your black ink cartridge.  What is a 932 instead of 933 cartridge?

  If it's a 932, can your try to clean the cartridges 2 times more?  Are there changes?  If this does not help, take a look at the following link and try all measures not yet taken.  Click here  Let me know how it goes.

• When I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003

  How to fix error code 105-100003

  I am running windows7 on my host network and vista on the other computer. I am able to connect to the correct internet on vista computer, but when I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003. I printed before and I have not changed or added to any software since. Both computers are desktop computers and connected by ethernet cable. I have run diagnostics and checked all cables. I have a modem 2 son I had about 2 months.

  Hi, Jimmy.

  Make the printer and model would be useful.  Thank you.

  Try the following:

  If your printer is connected via a wireless network:

  1. Make sure that your printer is turned on. (Start button / stop is turned on).
  2. Make sure that the blue LED of Wi - Fi on the front of the printer is on and stays on.
     • If the blue wireless LED flashes, your printer is not connected to your router.
     • 1. Follow the steps in the configuration of wireless network Guide (named the network installation Guide, if your printer has Ethernet printer capabilities) to connect your printer to your router.
       2. If you are unable to connect the printer to the router:
          1. Turn off the power to the router, and then turn on the router
          2. Follow the steps described in the [wireless] Network Installation Guide once again.
          3. If necessary, see what should I do if I can't configure my all-in-one printer (including the connection of wireless configuration)?
  3. When the blue LED on Wi - Fi from your printer stays on (not flashing):
     • If the error ' printer does not "occurred while you have been setting up the printer:
     • 1. Open Software Center.
       2. Select the tools of the printer, and then select Printer Setup Utility (under Tools).
       3. Follow the on-screen instructions to set up the printer.
       4. Try to use the printer again.
     • If the error occurred after you completed the roll-out of your printer from Home Center Software:
     • 1. Make sure that the print queue is online.
       2. From your computer, click Start > settings > printers and faxes (or start > printers and faxes).
       3. Click on your printer.
       4. In the printer menu, make sure that use printer offline is not checked.
          NOTE: These steps may vary depending on your operating system.
       5. Try to use the printer again.

  If the error persists:

  1. Remove the printer from your computer.
     1. Select start > settings > printers and faxes.
     2. Right click on your printer, then click on remove.
  2. If your computer is WINDOWS VISTA or WINDOWS 7 OS, turn user account control.
     1. Select start > Control Panel.
     2. Double-click user accounts.
     3. Click turn user account control on or turn it off.
     4. Select the check box use user account control.
     5. Click OK.
  3. Configure the printer again.
     1. Go to start > programs > Kodak > Kodak Printer Setup Utility.
     2. Follow the on-screen instructions to set up your printer.
  4. Try to use the printer again.

  If the error persists:

  1. If you have updated to the Home Center Software v6.x or greater, disable the Hello Service.
     1. Select start > run.
     2. Type services.msc in the box, and then click OK.
     3. Locate and right click on the Hello Service and select Properties.
     4. Since the "Startup type:" drop-down list, select Disable.
     5. Click OK.
     6. Locate and right click on the network AiO Kodak Discovery Service, then select restart.
  2. If you configure your printer, run the KODAK printer setup utility.
     1. Select start > programs > Kodak > KODAK Printer Setup Utility.
     2. Follow the on-screen instructions to set up your printer.
  3. Select the Hello Service.
     1. Select start > run.
     2. Type services.msc in the box, and then click OK.
     3. Locate and right click on the Hello Service and select Properties.
     4. Since the "Startup type:" drop-down list, select automatic.
     5. Click OK.
  4. Try printing from the center of renovation again.

  If the error persists:

  1. Make sure that any firewall software blocking the required services and that it does not block the firewall of the router. See cannot use a wireless printer to computer on the same network with firewall security program.
  
  NOTE: If you use BitDefender Total Security 2010, the problem can be solved by turning on the game mode in the firewall. If it does not turn on the game mode, temporarily disable the firewall to enable wireless printing.
• Make sure your computer is not connected to a virtual private network (VPN) or wireless home another network of safe working when you use the printer on your network. See using printer with the virtual private network (VPN).
• Check that your printer is not connected to the network trouble with the same name (routers with the same default SSID in your area). It is common for users to keep the value by default, out-of-box, SSID as the manufacturer provides (for example the linksys). If your router still has the default SSID, change the SSID under a new name specific to your router.

NOTE: updated to the latest version of the firmware of the printer and the software when prompted will help you have the most reliable connection possible. Go to www.kodak.com/go/aiodownloads.

If the error persists, contact us.

http://support.en.kodak.com/app/answers/detail/A_ID/36674/selected/true

• problem with the printer connected to windows vista,

  I have a Canon PIXMA printeriP1900 when I try to connect it to my computer, I get a message that the printer driver is not compatible with a policy enabled on your computer of mine that blocks NT 4.0 I have Windows vista. Can someone help me

  Go to the Canon Website and see if there are drivers for Vista.

  http://www.USA.Canon.com/consumer/controller?Act=DownloadIndexAct

  I don't see a pattern of IP1900 if you can't access the exact page. You will need to check your model number. If there are drivers for the version of Vista you have (32 or 64-bit), download and install. Do not have the printer connected until the installer tells you to do. If there are no Vista drivers for the printer, you can not run it under Vista.

  You must also run the software printer Canon of an administrative user account.

  MS - MVP - Elephant Boy computers - don't panic!

• printer connection

  I recently bought a hp Pavilion p6 2335ea to replace an old pc from dell.  Two dell computers were connected to my printer, a device All in hp officejet 4315, via a belkin device, which is passed from one user to another.

  The new pc works fine with the printer connected directly, as does the old another dell, but does not connect via the belkin.

  How can I reconnect the system so that the two PC works with a printer?

  I don't understand, and this Board is still topical. You're trying to network a printer between multiple computers through the Belkin router. However, the difficulty lies in the fact that it is a Deskjet and it is connectable via a USB cable only. Here, there are two options:

  First of all, if the router has a USB connection, you can connect the printer via the router and use the Add Printer Wizard:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_indirect_printer.mspx?mfr=true

  Second, you can install the printer via a computer and share the printer through the network. You must set up the computer on the network as a designated working group and share the printer through that.

  http://Windows.Microsoft.com/en-us/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-7&V1H=win8tab1&V2H=win7tab2&V3H=winvistatab1&v4h=winxptab1

  These are your best two solutions with this printer, but I would recommend get a printer with at least one Ethernet connection - this would simplify the networking of the printer in a simple and clean process.

  I would like to know how this happens and have a great day!