Adding an external device
How do you show your camera (connected via USB) in the Finder?
You put your camera in mass storage mode. Refer to the manual of your camera how to proceed.
Note: is not all cameras are supported mass storage mode. Some support only of Protocol PTP (Picture Transfer).
Tags: Mac OS & System Software
Similar Questions
-
I recently moved and you need to configure my Mac mini once again, I added 3 external hadrdrives. Previously, they have been listed under devices now that they do not appear anywhere. They contain all my pictures form opening and ambient light. Where required external drives? How can I find them?
Open Finder preferences and make sure the boxes for external drives are checked in the general tabs and sidebar.
If it does not help?
Try resetting the SMC, according to > reset the management system (SCM) controller on your Mac - Apple Support
-
My iPod touch get now and then next alert message due to change on my iPhone.
EMail address added to < < my device name > > < < my device name > > now using < < my mailadress (identical to the Apple ID) > > for FaceTime and iMessage.
Why I get this message? iPhone is disabled due to my work offshore for two weeks, but the use of the iPod touch is allowed.
What is my apple ID used on other devices with the same name as my iPhone?
I would be happy if anyone has an explanation of why I feel this strange behavior.
When you connect to FaceTime or Messages on another device, another peripheral other device using this same ID will get the message that has been signed to. Some iOS (and OSX) update log for other devices will get the message when that happens.
You said "by reason of change on my iPhone"
What has changed on the iPhone?
-
The use of recovery of product with external devices?
I have a laptop Toshiba Satellite and it is that I wanted to re - format my windows XP. But I realized that my CD Player no longer works so I decided to put my external CD burner on my pc.
When the laptop is turned on, the CD is well recognized from this source. But now, my problem is that I can't find a way to boot the CD in the external drive (USB-Boot).
How can I do? Or someone has a better solution for me to format my laptop because the internal CD player does not work? (I already tried in BIOS for external devices as the first boot device, does not :-()
Unfortunately the guy... I have bad news for you.
Boot from the external USB CD/DVD drive is not possible. BIOS do not support this feature.If you need to boot from the CD, you will need to purchase a new, compatible internal CD/DVD drive and supported.
Note that not all CD/DVD slim line drives are supported because different master/slave/c-salt settings.
Usually, the user manual should provide information on the supported CD/DVD burner.
If this isn't the case, then ask the maintainer authorized Toshiba and a compatible player.Best regards
-
My iMac does not 'see' an external device into USB port?
My iMac doesn't "see" my Galaxy S6 when I plug it into a USB port. The same thing happens when I plug my headset intercom of exploitation to a USB port. Nothing appears in the list of devices. I can see my external hard drive listed under devices. I tried different cables and all the USB ports. Both devices to load when it is connected, but they do not appear when I open the Finder. Any ideas on how I can get the Mac to recognize these external devices?
OS X El Capitan 10.11.3 version
Devices section of the Finder will be only peripheral with accessible storage. Open an application that interacts with the others.
(141396)
-
Satellite P200-1EE: DVD player HD Toshiba "video output for external device cannot".
Need help!
My P200-1EE won't play HD DVDs. At startup the HD DVD software with an HD DVD in the drive, the drive displays on the screen, and after a short time returns an error. The message is ' + Toshiba HD DVD Player - impossible to output the video to an external device. Please change your display device by pressing the FN + F5 keys after the end of the application ' +.
Problem is that I do not use any display on the screen of the laptop. Only the screen of the laptop is available when I use FN + F5 suggestion. It does not cure the problem.
Drivers are up to date as far as I can tell.
Any help is greatly appreciated.
GandalfHello
I searched this forum for similar issues and I think I have a solution.
It seems that the Realtek audio driver causes this problem.According to this Toshiba document a new soud driver installation will help you solve this problem of HD - DVD.
Check it;
HD DVD title does not play ("unable to output the video to an external device")
http://askiris.Toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1664 788xml & sliceId = & dialogid = 24590306 & stateId = 1% 200% 24588233 20Good bye
-
Error: "unable to release the video to external device" HD DVD playback
Hi all this makes me crazy,
I install only the updates mentioned on the site, but I get the following message appears when you try to play a HD DVD on the notbook or through my Tv.
+ Output of the external device video impossible. Please check the external output setting after the end of the application. +
Thanks for any help in advance.
Stew
Hello
I found a good thread posted several days.
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726There is exactly the same problem and a link to the document from Toshiba with the solution.
According to this doc Realtek Audio Driver for Windows Vista installation or update should correct this problem.
Check it out and please give me feedback.
Good bye
-
Equium A200 - 1V0 DVD Player error impossible of video output to an external device
Hello
I use my Equium A200 1V0 laptop with Vista Home Premium, and whenever I try to watch a DVD using the preinstalled Toshiba DVD Player software, I get the following error..."Unable to video output to an external device. Please spend your
display the buttons on the unit by pressing the Fn + F5 after the end of the application. »I do not have an external monitor, and have never had a. (By pressing the Fn + F5 buttons does not work, because...) I have not attached external devices!)
The software used to work properly, and I have not changed the settings at all.I have now tried to reinstall with the latest download from Toshiba, but the problem remains.
Any thoughts would be accepted with gratitude.
Bufster
Hello
I found a boyfriend of the solution.
How?I searched simply here in the forum and found this thread!
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726Jack Black has posted a link to a useful Toshiba doc that says that this error is related to the Realteck sound driver.
Update the audio driver and you must solve this problem!
-
Unable to release the video of external device
Hello
I am trying to play a DVD in my DVD play using the Toshiba DVD player software. I get the following error message when I do (paraphrasing):
Can't get out the video of external device. Use the FN + F5 to change device once you have closed the application.I did it but the "device" that I could choose was my laptop LCD - which makes sense because I am not connected to any device.
I come to this site and saw the comments I could need to install the Realtek Audio driver. I did, restarted and tried again. Still have the same error message.
Any ideas?
Thank you!Hello
Just a few questions:
What cell phone do you have?
What operating system you are using?
Have you tried another player like VLC media player?Maybe you should try to update the display driver. The audio driver has nothing to do with the video output.
I don t use Toshiba DVD Player, I m using VLC media player. It s faster and can play most audio and video files.
Good bye
-
Satellite A300 - Windows 7 does not recognize external devices
Windows 7 (32-bit) an upgrade of Vista and couldn't be more peripheral to work due to driver problems. Talked to Microsoft and they found that my drivers are still there but can not find them unless I tell them where to look, and so all devices I plug I need to install drivers for both times.
Any body have ideas how to solve this problem?
Hi doug47,
To be honest, I think I can t help you because I know you want to know exactly.
External devices, you mean? Not everything you need drivers, like external hard drives, USB sticks, etc. These discs will be recognized automatically (plug & play) and they are read to use after connecting.
If you mean printer or mobile phones you have need of additional drivers. You can get it from the manufacture.
-
playing a DVD from an external device
I just bought HP Envyx360 15.6 without CD/DVD drive, so I bought an external. I installed a LG external device and the DVD will not play. How to read the DVD to external devices?
Thanks I'll try that, after I have the LG device to uninstall and reinstall another LG unit. Hope this works
-
Is the possible to external device recovery?
Hi @all,
I have a Satellite M30x-134. My DVD player damaged a moment my question:
How can I recover my system (Windows xp) with a damaged internal drive?
Is it possible to leave an external via USB dvd drive or a USB?
Can you tell me the parameters of this procedure?
Many, many thanks and greetings,
EGGEIt is theoretically possible, but not so easy to do. USB option does not work. What you can try is to use the external CD/DVD drive, but it won't work so easy. The reason is that this external device will be recognized automatically.
I didn't try, but I'm sure you must start your laptop with disk boot BACK, BACK to load a driver for the external device to access and as the last step of the installation of recovery.
It's quite complicated.
Best solution for you is to check eBay, buy the new optical disk drive, be happy with many of the workbook. -
How can you save ringtone on external device
I had to do a factory reset after backing up my data to iTunes. When I've restored everything, my ringtones disappeared. I contacted support and they me regranted the purchase, but I would like to know how to save this ringtone on an external device, so that if I do a restore again, I have my ringtone
You have it redownloaded on your phone or the computer iTunes? If your phone, then connect to iTunes on your computer and file > devices > transfer purchases, it must copy the ringtones from your computer's iTunes library section (if you it download on your computer, it should already be there); Select ringtones from your computer's iTunes library section; Right-click (command-click on Mac) the tone and select 'Show in Explorer' ('show in finder' on a Mac) and that should take you where it is located on the computer so that you can copy
By default, your iTunes library is stored in:
- Mac OS x: /Users/username/Music
- Windows XP: \Documents and utilisateur\Mes Documents\My Music\ Settings\nom
- Windows Vista: \Users\username\Music\iTunes
- Windows 7 and Windows 8: \Users\username\My Music\iTunes
(I think that Windows 10 is the same as the 7 and 8).
-
Any external device to record and store the video?
I need an external device (card reader, USB dongle, no matter) allows me to directly record and store video on this subject. My iPhone is already full, so I can't use something like an ordinary lightning flash drive, because he always would force me to record videos in my iPhone and then move it from there.
Any ideas?
An external device that can record and store video? Look like a video camera for me.
-
HD - DVD will not play on Satellite P200-123 unable to output to external device
Hello
Yesterday I bought a P200-123. One of the first things I tried after installation of Vista originally ran a HD-DVD. I know that the drive is fine as it works in my Xbox 360. Unfortunately, it has not worked with the software provided the HD-DVD player - the play icon will light up and then I get this error message:
"Impossible for the release of the video on an external device. Please change your display keys of the device by pressing the Fn + F5 after the end of the application. »
I don't have an external display connected to the laptop. I tried different discs but all gave me the same error. I then carried on the update of drivers and install a bunch of Windows updates. I tried several times the HD-DVD player in the countless updates and restarts but I still get the same error. Frustration, I bought PowerDVD Ultra. Who played the film for about a second before giving me an error:
"Failed to initialize the display secure session - (error Code = 0122).
The error dialog box goes on to say that the error can be caused by an incompatible graphics driver or even because I use a Setup dual monitor. The reference to two monitors is common to every player application so I wonder if the problem is in this area. I have not connected to a secondary screen but when I look at the standard windows display properties or the ATI Catalyst control center app dialog I see a disabled secondary monitor. I guess that's normal - there is no obvious way to remove the secondary display disabled.
Can anyone help me to work the HD-DVD playback?
Thank you
Ian
Have you tried updating the Toshiba HD DVD player?
You can find the update in the Qosmio G40 section check it and try to run the update. Notes; Don t delete the old version of the laptop!
Maybe you are looking for
-
I just updated my iPad and it told me to activate it using my Apple ID. I entered my Apple ID and it will not work. Help please
-
Satellite A300 - 12K unable to connect to the ADSL wireless modem
My Satellite A300 - 12K suddenly cannot connect to a dsl wireless modem... There are no changes made to the parameters ofHowever it connects to a modem that is not encrypted. Any idea what the parameters might have changed?
-
HP Envy 15 j108la: HP Envy 15 WiFi problem
Hello. I recently had a new router, which has two networks. One, with a 2.4 Ghz wifi and the other with wifi 5 Ghz. I read my laptop specifications and details and said he had a dual wifi card incorporated, which means that it supports 5 Ghz wifi. My
-
LabWindows CVI 2010 and GetProcessAddress()
I use v10.0.1 Labwindows CVI 2010 after the upgrade to version 2010 CVI v10.0.0. After the upgrade, I have a compilation error of a statement that compiles fine in the previous version. The error is: «= Operands are types illegal "pointer to __stdcal
-
Could not load mndsifz.dat error on start up
Recently when I started my PC, so came with the message above. I click OK and everything seems to work OK. How I either correct the error or eliminate it? It is said that it is trying to load from C: program data / mndisfz.dat I do not have a direc