Similar Questions

• T400s "battery not installed" after updating to Bios (1.20)

  Hey,.

  I have a problem with my T400s. It is a month and he now asked me to update the system software. I did it and it installed a lot of new drivers etc Inc. a Bios Update. (1.20)

  The problem is now, who can't see the condition of the battery. (The battery icon remains Gray and says "battery not installed")

  The work of computers very well (AFAIK) both on battery as power.

  I checked the thinkvantage Toolbox diagnostics and there I can see the State of the battery (for example, discharge, 48%).

  The latest versions of thinkpad power manager and driver ThinkPad power manager are installed.

  I tried restarting the computer and remove the battery for a while, it does not work...

  Someone at - it an idea?

  Have you tried to reinstall thinkvantage Power Manager?

• 8.1 will not install after updating

  My computer laptop (Acer Aspire V5-122P-0643) was running bad so I ran a refresh on it.

  After the update, I installed all the updates important and then tried to reinstall 8.1 but when I press the tile into the store it dose literally nothing no nothing just the error. I can't 'trust' my laptop so I spent account.live.com/trustdevice and entered everything, including the code sent by text, but nothing helped. Another problem is that if I try to install an app on the store it is stuck on standby.

  I think that all these things are related, but do not have a solution or all tracks.

  S ' ensure that you apply the latest updates before upgrading.

  -Try to switch to a wired connection if you download over Wi - Fi

  Disable/uninstall no matter what third-party Antivirus, you may have installed before the update.

  -Do a clean boot.

  http://support.Microsoft.com/kb/929135

  You can find the details here for which the update is necessary to see the Windows 8.1 update.

  If you encounter problems with the installation of Windows Update, we recommend that you post for help with this question.

  You can also try an automated solution by running the Windows Update troubleshooting tool

  3. you must synchronize your App license; You can do this:

  * On the start screen, tap or click on Store to open the Windows store.

  * Drag from the right edge of the screen, and then tap Settings.

  (If you use a mouse, point to the lower right of the screen, move the mouse to the top and then click settings.)

  * Tap or click App updates

  * Press or click on Sync licensing

  4. the Windows store catalog is not refreshing properly.

  To refresh the catalog, try pressing the Windows key and R to open the Run dialog box type WSReset.exe and press ENTER. Restart, then check again the store Windows.

  also:

  http://blogs.technet.com/b/ouc1too/archive/2013/10/25/something-happened-in-the-install-of-Windows-8-1-can-t-be-completed-and-now-you-re-annoyed.aspx

  1. press Windows + W and put updates in the search box, select view installed updates search results.

  2. in the window updates installed, search the update for Microsoft Windows (KB2871389) and right-click on it, select uninstall.

  3. now, using the following links, download the update KB2871389 manually package for your edition of Windows 8 and install it:

  Download link [All versions supported on x 86 Windows 8]

• MacBook Pro wifi hardware not installed after update of El Capitan

  Hello

  I connected my macbook this morning to find that I had a gray wifi symbol with an x through it saying ' wifi: no hardware installed '. I'm taking in the Apple Store to be looked at in a few days, but only I was wondering if anyone in this community has experienced a similar issue that has an easy solution so that I can return to the top and run. It worked all fine until this morning.

  Ive updated to El Capitan - 10.11.1

  I have a Macbook Pro 13 inch retina end 2012

  Thanks in advance

  This means that the two Wi - Fi drivers are damaged or that your wireless card has stopped working.

  A good way to find out what the problem is to start up in OS X Recovery in now pressed the command keys so much R during start up your Mac to the top. Once your Mac is turned on, look at the Wi - Fi icon in the upper right and see if you can choose any Wi - Fi network. If so, reinstall OS X.

  However, if you can not choose any network, it is probably a hardware problem, so you have to take your Mac to an Apple Retail Store or dealer to get the Wi - Fi card replaced.

• Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  If you leave CC 2015 Installer remove older versions of Photoshop you can re - install older versions using the creative Cloud Desktop application or through direct downloads, you can install.

  Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools

  Download new Adobe CC trials: direct links (no Assistant Manager) | ProDesignTools

  Download Creative Suite 6 applications

• As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  This may be caused by the Tab Mix Plus extension

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to install the latest Dev version of Tab Mix more if you use this extension.

  See the sticky on the forum of Tab Mix Plus:

  • http://tmp.garyr.NET/forum/viewforum.php?f=3
  • http://tmp.garyr.NET/forum/viewtopic.php?f=3 & t = 15740

• Satellite L300 - I can not install an update for Windows Vista

  I can not install an update to Windows Vista after you restore laptop (satellite L300) to factory settings. Tried to install with automatic updates and download of the update on your computer. What auto-update error: 8024 to 000.

  When you try to manually install SP1 getting error: 0800FFFF. I tried to disable the firewall, Defender and the UAC. Someone with such ideas?

  The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.

  I would like for you to perform general troubleshooting steps for Windows Update.

  This diagnosis is generally applied to all Windows Update related issues.

  Stop Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net stop wuauserv
  net stop bits
  net stop cryptsvc
  4 Please, do not close the command prompt window.

  * Rename Windows Update records *.
  1. at the command prompt, type the following commands and press ENTER after each command:
  2 ren %systemroot%\System32\Catroot2 Catroot2.old
  3 ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
  4 Please, do not close the command prompt window.

  Registration of DLL's on Windows Update *.
  1. Please copy and paste the following text in a new Notepad document and save the file as WindowsUpdate.BAT
  2 if it is registered correctly the icon will go from a Notepad file in .BAT file which has two blue toothed wheels as its icon.

  Restarting Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net start wuauserv
  net start bits
  net start cryptsvc
  output
  4 now, please check the updates via Windows Update to determine if the problem has been resolved.

• autorotation does not work after update 8, 1 wind - W510

  

  I have a tablet with docking station and 32 GB w510

  the autorotation feature does not work after update to 8.1 windows. the lock button does not work and there is no option for the autorotation lock in the settings.

  I ve installed the latest driver form acer download page and Windows update.

  then I tried a clean install of windows 8 and yet once installed can I 8.1 and it still does not work.

  What can I do?

  PS the camera does not work

  

  -solution for me! ----

  I don't know what happened, but I'll tell you what I did not last:

  I have the European version of Windows 8.1 N(without Media Feature Pack)

  1. reinstalled microsoft silverlight.
  2. search for update---> silverlight update available!---> installed!
  3. reset
  4. installed the 'Media Feature Pack for N and KN from Windows 8.1 versions"from here: http://www.microsoft.com/en-us/download/details.aspx?id=40744
  5. reset
  6. Search again---> new available updates updates---> installed
  7. reset!

  now, camera, autorotation and all the apps work for me. I hope this will help you

  Best regards

• my computer will not install the update of security for Windows XP (KB2481109)

  Moderator before go Note: IE8.
  -----

  my computer will not install the update of security for Windows XP (KB2481109) can you help me.

  Hello

  (a) don't you try to install the update manually?

  (b) you get any error message?

  (c) don't you make changes to the computer until the problem occurred?

  (d) what anti-virus software is installed on your computer?

  I suggest you try the steps below and check if it helps

  Method 1:

  If you have installed a security software on the computer, then I suggest you to temporarily disable a software antivirus installed on the computer and check if the same problem occurs

  Note: Please make sure that you activate the software of Antivirus\Firewall after the test to keep your computer protected.

  Method 2:

  I would say as you try to perform the clean boot and then try to install the update and check if it helps, here is the link:

  http://support.Microsoft.com/kb/310353

  Make sure that return you the computer to a normal startup mode once it's done.

  Additional information: make reference in the link below:

  http://support.Microsoft.com/kb/2481109

  Hope this information is useful.

• Creative cloud not install after that I put my user password

  Creative cloud not install after I put my user/administrators password, nothing happens after. I have creative cloud before but I deleted it instead of uninstall. I tried everything and nothing works, I have urgent need! someone please help! -Thank you

  When you install or update, it's PROBABLY your operating system for you to prove that you have by asking your COMPUTER, not your Adobe https://forums.adobe.com/thread/2139902 password password

  Sign out of your account... Uninstall... to run vacuuming...

  -non-Cloud programs, to disable the service before uninstalling

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and before reinstalling is often necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

  - and 5 steps in response to #1 https://forums.adobe.com/thread/2144928

• Design Premium CS5 does not install after download for Mac.

  Design Premium CS5 does not install after download for Mac.  He says that the installer is corrupted.  It was downloaded from the other downloads page repeatedly.  Is there another way to download this file?

  When you ask a question you will need to provide some basic information

  -https://forums.adobe.com/docs/DOC-5601

  -Exactly which version of the operating system?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Certain things does not work after update MacOS Sierra on my Macbook Air 13 "Late 2010

  Drag between apps full screen, Mission Control and expose App are not working after update MacOS Sierra on my Macbook Air 13 '' end 2010. The problem because my macbook are not compatible with the current Mac OS or something else?

  Go to System Preferences > Trackpad and turn off and then on the ' shot between apps full screen» It should then work.

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• My front camera not working after update to ios 9 (Iphone 5) Please help me to solve this

  Hello

  My front camera of the iphone 5 does not work after update to ios 9, please help?

  I have the same problem on my 5s.  Just after the upgrade to 9.3 camera is black.

  Work, rear camera, but the camera application usually freezes before let me pass.  Sometimes a warning icon yellow appear in enforcement camera, touch, he says the flash does not work for the unit to cool down.  No change after a restore is complete.  Other applications of the camera have the same problem.

  iPhone 5, iOs 9.3