.ADMX Inetres (142) is missing from Windows 7 Pro 64-bit

Similar Questions

• Downgrade from Windows 7 Pro 64-bit of Windows XP pro 32 bit

  Hello

  I have a desktop running windows 7 pro 64-bit, but need to switch to windows XP pro 32-bit as I has an electronic Development Council which is not easily compatible with this version.  I understand from licensing that as I Pro I would be entitled to downgrade, this applies to the downgrading to 32-bit as well.  If it's ok where can I download some ISO Windows XP pro 32 course and it's just a case of putting my windows 7 inside product key?

  Hello

  Until you, ensure that you will have drivers for your hardware + devices on x 86 XP. If this isn't the case, I wouldn't do the downgrade you will have many problems.

  Did you first try to run the program in compatibility?

  Kind regards

  Patrick

• Unsupported personality: PCL on print Laserjet 1012 from Windows 7 Pro 64-bit

  I have an HP Laserjet 1012.  My PC has Windows 7 Pro 64 bit.  I used the Laserjet 1015 PCL 6 drivers.  When I printed the first two times, it worked fine.  Now each page just print "Unsupported personality: PCL ' at the top.

  What should I do now?

  Thank you for your ' Experts for a day Tech Support.

  Mark

  Hi rbarbo43,

  I found the following thread that will help you during the installation of the printer in Windows 7. Let me know if you need assistance?

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/LaserJet-1012-driver-for-Windows-7/m-p/351356#M16114

• HP Compaq 8200 Elite SFF: Downloading an image from Windows 7 Pro 64 bit with product key

  I have this machine and the product key for the operating system, but WHERE I can download an image or a file with she understood EVERYTHING?

  I donot want to download 10-20 different parts... just a bump - but where?

  Hello:

  You can legally download W7 wherever you more unless you have a product key from retail full version, (including one on your PC isn't the case).

  The best thing to do to reinstall W7 would call HP at this number (USA/Canada) and order a set of W7 for your PC recovery discs.

  1-800-334-5144 PC serial number handy to give to the customer service rep.

  A set should cost about $10 mailed to class 1.

• My windows 8 pro 64-bit oem disk is broken. How can I download ISO from microsoft?

  My windows 8 pro 64-bit oem disk is broken/not can not be read from the optical drive. How can I download ISO from microsoft? Thank you.

  Thanks for responding to my question.  Unfortunately I'm building a new pc for myself and there is not yet installed on the pc of the OS. It is not clear if the downloaded package requires a previously installed operating system of existing windows.  Anyway, thanks again for taking the time answering my question.

  Try to return the drive to the place you bought it for a replacement. Not guaranteed, but they could understand.

  or

  How to replace hardware or lost, broken, or missing Microsoft software

  http://support.Microsoft.com/kb/326246/en-GB

• Replace the MBR from Windows XP Pro

  How to replace or repair the MBR from Windows XP Pro?

  An ASR replaces the MBR?

  Out of curiosity, I tried sysint.no mbrfix.exe using examples.  I know ran fixmbr mbrfix application.  How to bring back the original Windows XP Pro MBR?

  In addition, the flush for the app to c: drive was performed.  Made BRIM?  Thank you

  Hello

  See the following article: Description of the recovery Windows XP for power users Console

• Downgrade from Windows - 8 updates from Windows-7 Pro-Windows-8 causing of programs; Troubleshooting and problems

  Dear Microsoft community team,
   
  I installed the Windows (27) - 8 and Office 2010 updates yesterday that was recommended in the notifications of security & systems.
   
  After installing these updates (27) in my HP Envy h8 - 1520t PC, my programs said crash and stop and start automatically. This has been a recurring problem with the updates of Windows-8 that I installed in my new PC.
   
  As a result, I am unable to play my favorite games, use applications and have constant program blocks.
   
  I am very disappointed with these problems. I bought a copy of OEM OS-Windows 7 PRO 64 bit and would like to downgrade from Windows-8 to-Windows 7 PRO 64-bit OS. Can you please provide me with instructions to install Windows - 7 PRO on my PC?
   
  I spent countless hours online and search for bugs on the web sites of Microsoft for Windows-8 updates of the anomalies and corrections, with no resolution. HP has no alternative but to contact Microsoft support. I can't find a link email Microsoft support anywhere.
   
  Please help me as soon as possible. Many individuals have downgraded to Windown-8 to-Windows 7 PRO with positive results on their HP Envy h8 - 1520 t PC. I never had a problem with the Windows 7 operating system.
   
  Sincerely,
   
  Paul Ferrughelli

  http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/downgrade_rights.aspx#fBid=WF8U8JFesYQ

  or

  http://support.Microsoft.com/kb/2832566/en-AU

• Aurora running, but can not be played on Desktop Windows 7 pro 64-bit

  I've been using Aurora for several years with Windows 7 pro 64-bit with the two latest major 28/29 Auroa just missing from my desk after clicking on the icon on the desktop, I tried to uninstall, but the system told me I had still Aroura running uninstall so I had to reboot my PC, I could uninstall I then reinstalled Aurora and a pinned icon appeared in the taskbar, but when I clicked on the icon on the desktop the hourglass turned but no Aroura started on the desktop, so I went through the whole thing again and uninstalled Aurora and installed Firefox V26 and now it has progressed to the last version that has disappeared as exactly the same way.

  What can I do if I use Aroura again because it is very good and safe to use?

  I can't use the troubleshooting info as I can't see Aurora/Firefox to view or copy/paste the info shown.

  Pete

  Thank you solved the problem, I restarted the PC and now Aurora works again thanks.

• HP Pavilion 15 lowered a score of 8.1 for Windows 64-bit for Windows 7 Pro 64 bit driver problem

  I just downgraded a HP Pavilion 15 Notebook, which was just recently bought with Windows 8.1 64-bit installed.

  The owners could not get with Windows 8, so they bought Windows 7 Pro 64 bit.

  After changing the option of Secure Boot UEFI BIOS, I installed windows 7 for them, installed the drivers from the site HP Web for this model of laptop, but there are a few drivers who will not not turn on.

  Product number is F8S59EA #ABU

  SYS ID card is 2163

  Intel processor Core I5-4200U @ 1.60 GHz

  8 GB memory

  BIOS Version F42 has been upgraded to F62

  But there is a PCI device in device without driver manager now, details of the error are:

  PCI DEVICE

  Hardware ID

  PCI\VEN_10EC & DEV_5227 & SUBSYS_2163103C & REV_01

  There is also another error of unknown device listed, the details are:

  The unknown device properties

  Hardware ID

  ACPI\HPQ6007

  I don't know if this is related to the first error message, but I thought I'd list them here anyway.

  In addition, try to install the software Cyberlink listed on page of drivers for this laptop, Cyberlink Director Photo software, the software Cyberlink PowerDVD and PowerDirector Cyberlink software all refuse to install.

  PowerDVD and PhotoDirector gave "Software can be installed in the machine allowed" error message and PowerDirector gave the error message "is not a valid HP drive, the installer stops now.

  If someone could please help in telling me that drivers are missing, (I enter all the machine ID in the box HP drivers, pilots said it remained for this machine, installed correctly, just these some problems) I would be most gratefull and the owners of laptops would be too!

  Mushty wrote:
  

  I just downgraded a HP Pavilion 15 Notebook, which was just recently bought with Windows 8.1 64-bit installed.

  The owners could not get with Windows 8, so they bought Windows 7 Pro 64 bit.

  After changing the option of Secure Boot UEFI BIOS, I installed windows 7 for them, installed the drivers from the site HP Web for this model of laptop, but there are a few drivers who will not not turn on.

  Product number is F8S59EA #ABU

  SYS ID card is 2163

  Intel processor Core I5-4200U @ 1.60 GHz

  8 GB memory

  BIOS Version F42 has been upgraded to F62

  But there is a PCI device in device without driver manager now, details of the error are:

  PCI DEVICE

  Hardware ID

  PCI\VEN_10EC & DEV_5227 & SUBSYS_2163103C & REV_01 is a card reader.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63708.exe

  There is also another error of unknown device listed, the details are:

  The unknown device properties

  Hardware ID

  ACPI\HPQ6007 is the software of HP 3D Driveguard

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&DLC=en&LC=en&OS=4063&product=6732717&sw_lang=

  I don't know if this is related to the first error message, but I thought I'd list them here anyway.

  In addition, try to install the software Cyberlink listed on page of drivers for this laptop, Cyberlink Director Photo software, the software Cyberlink PowerDVD and PowerDirector Cyberlink software all refuse to install.

  PowerDVD and PhotoDirector gave "Software can be installed in the machine allowed" error message and PowerDirector gave the error message "is not a valid HP drive, the installer stops now.

  If someone could please help in telling me that drivers are missing, (I enter all the machine ID in the box HP drivers, pilots said it remained for this machine, installed correctly, just these some problems) I would be most gratefull and the owners of laptops would be too!

• Maximum supported size of HARD drive for HP Elitebook 8440p Windows 7 Pro 64 bit runing

  Hello, I just bought a HP Elitebook 8440p "off lease" of Tigerdirect and seeks to upgrade the two memory (from 4 GB to 8 GB) and put in the eligible of the biggest HARD drive I can. Either a 512 GB SSD or a 1 TB WD hybrid WD BLACK2 (1 TB HDD / 120 GB SSD Combo drive in a single package!). I would like to see more large disk addressable by using Windows 7 Pro 64 Bit OS since I don't seem able to find this info on the web. HP offers only only a 256 GB SSD in its specifications. but I didn't know if it was do limitations of BIOS or availability at the time of production, even for the HARD drive to 512 GB.

  Also, I would like to know if 9.5 mm compliant Bay that it needs to be for the WD drive. Can't find that either, and while the new laptop has not yet happen, all measure exactly the same way regarding what works and what simply cannot be "cheated".

  Thank you for taking the time to read this and NO information to that effect would be Greatl appreciated!

  Essentially the reason why you do not have a maximum size of hard drive is because there is not everything. Between SATA and 64-bit OS', worrying about maximum size of hard drive is a thing of the past. Are the biggest readers found in the manual, as you suspected him, just a function of the market at the time of manufacture. It was a few years ago now, it is so understandable that the offerings were "at the time" more thin than now.

  Here is the Service Manual:

  Manual

  Page 4-9 shows the procedure of the Bay and the replacement of the hard disk. The Bay is made for a 9.5 mm thickness 2.5-inch wide SATA hard but the new 7 mm readers also works. The black hybrid drive requires some software (included in the package) to treat the two drives in Windows and I read a modest amount of disappointment in the documentation about them. If you can afford the 512 GB SSD go in this direction and you will not be sorry. I use a Samsung 840 Evo and it has worked perfectly for me for almost 2 years and the most recent 850 I hear is even better.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• DownGrade Windows 8 Pro 64 bit on 4540 s HP Probook Windows 7 Pro 64-bit

  Hello

  can someone tell me the correct procedure to downgrade pre-installed 64-bit Windows 8 Pro that came on my laptop 4540 s newly purchased to Windows 7 Professional 64-bit? Machine itsself comes not with any media. I also read the key is now also integrated into the BIOS. As I intend to replace the 500 GB HDD with a SSD 250 GB, I would like to re - install windows 7 at the same time. I know that you can download the vanilla windows versions 7 of m6mobile.fr and others and then install but I wanted to know if there was a formal process for HP machines. It would be also good to know that the process of extraction of the COA, so I can activate Windows 7 installation completed.

  I am based in the United Kingdom (and an employee of HP)

  (it seems I'm not the only one having this problem - I guess this method works http://www.pcworld.com/article/2015107/downgrading-from-windows-8-to-7-what-you-need-to-know.html?pa... )

  but before could someone confirm that part "call microsoft" will be ok for me if I have no physical cost... also what can I do if I have not a pro windows 7 product key to enter during the installation of windows 7 - because obviously I intend to use the rights to downgrade to windows 8 pro key!).

  advice appreciated.

  Ad.

  Ok...

  so having figured out that I can downgrade sounding MS I took the lead and mounted my new SSD drive and installed Windows 7 Pro 64 bit. Everything is good. What I need now is some of the correct drivers to get me going.

  If someone could point me to the right for the following, I'd be grateful so I don't waste time to download everything. My version is HP Probook 4540 s C4Y79EA (i5-3210/4 GB RAM/15.6 inches) model British.

  Some of the choices pilot have several versions of pointers to good enjoyed.

  It is mainly in the field of the network drivers for the Wifi and fixed ports.

  Thank you.

  I determined what hardware is in this model.

  WIFI/Bluetooth - download drivers Ralink

  Ethernet card integrated - download the Realtek drivers.

  The rest should be pretty straigtforward...

  Cheers.

• Can I do a clean install of Windows 7 Pro 64 bit on Vista Ultimate 32-bit upgrade. Installation file will not work. The error is described below.

  The XPS 730 with Intel Q9450 computer yourself running Windows 7 64 bit? The details of performance show that it is capable of 64-bit. When I try to install Windows 7 pro 64-bit upgrade, the installer will not work. I get an error that reads:
  The version of this file is not compatible with the version of Windows that you are running.
  
  I'm currently running Vista Ultimate 32 bit. Everything that I read on Microsoft and elsewhere says that you can go from Vista 32 bit to an operating system Windows 7 64-bit as long as you do the clean install. I'm that far away since I can't even run the installation.
  Maybe nobody knows what could be the problem?

  Hi Hal K,

  Thank you for visiting Microsoft Answers.

  If you are currently running a 32-bit version of Windows, you can only perform an upgrade to another 32-bit version of Windows. Similarly, if you run a 64-bit version of Windows, you can perform an upgrade to another 64-bit Windows version.

  If you want to move from a 32-bit version of Windows to a 64-bit version of Windows, and vice versa, you will need to back up your files and then perform a custom of the version of Windows you want to install installation.

  You can see the following link, installation and reinstallation of windows: http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Swati K - Microsoft support technician
  Visit our Microsoft answers feedback Forum and let us know what you think.

• New installation on windows 7 pro 64-bit sees not connected wired Officejet 6500 E710a-f

  Hello!

  New installation of Windows 7 Pro 64 bit on a gigahertz 3.40 AMD Phenom II X 4 965 with 8 GB of ram. Printer drivers worked on the same bench while he was running as Windows 7 Pro 32-bit.
  After only install FF, AVG, and Acrobat (almost a clean install), downloaded the software HP Officejet full feature and pilot 2012-10-22, Version: 116,98, 28.8 M - OJ6500_E710n - z_1315.exe and tried to install the Officejet 6500 E710a f.

  The printer has a manually set static IP and can be ping from the host. Clean Windows Firewall is disabled and stopped.

  The web interface using the IP address of the printer comes with all the features works on FF.
  Network status shows connected with IP address, hostname and Mac.

  However, when installing the network audit is no ethernet connection. Even manually enter his public static IP address or hostname does not solve the problem.

  Try the USB, the same question option. I see in Device Manager under other devices HPOfficejet 6500 and 6500 HPOfficejet - Fax with a blue questionmark.
  (In the same "other devices" there are 2 Officejet 6500 with a yellow exclamation point - probably from failed network installation).

  In the printers and devices window, the 6500 is displayed with the correct thumbnail, but with a yellow exclamation point icon. Law and by selecting the convenience store, Windows comes up with the message that no driver is installed and offers a solution.  The correction ends with the error that no drivers not found for the FAX. Re-apply the patch never finds the driver.

  Anyone who has met something similar (and a solution)?

  Thanks for any help!

  Jack

  After trying to do an install clean-install of 100% and once again, the driver software could not find the printer name or IP address.
  Back at each stage, I noticed that I was not using the correct driver! For some reason I D/L the pilot E710n which is for HP Officejet 6500 a Plus e-All-in-One.
  Whatever the difference, when installing the E710n for the model does not detect the printer, or via USB or Ethernet.
  After you download the right driver for the E710a - f HP Officejet 6500 a e-All-in-One Printer (OJ6500_E710a - f_1315.exe) installation perfectly finished in a few minutes and everything goes well...

  You would think, base or USB connectivity network should not be dependent on the specific differences sub-model. I was expecting that a bad driver interrogate the device after finding its IP address and display an error message with useful text.

• LaserJet p1006 and windows 8 pro 64-bit

  When released drivers for the laserjet p1006 for windows 8 pro 64-bit? I have a printer which i cannont use...

  Passed Windows 7 32-bit to 64-bit Windows 8, had all the problems mentioned above, trying to install Laser Jet P1006.  Downloaded and installed Windows 7 64 bit P1006 drivers from HP web site, hp_LJ_P1005_Full_Solution_Row.exe, and ljP1000_P1500-HB-pnp-win64 - in .exe.  Had to install both in the order listed above, printer would not work with a driver in itself.  Printer works like a champ, can't install the new 64 bit drvr Win8 when (if) HP comes out with it.

  Update: A worked well for a week, out of nowhere the same document is sent to print twice, one showing file size, a display 0 kb to the size of the file cannot be deleted 0 kb file without unplugging the printer and restart the computer.  May have to do with the installation of Office 2010. Back to the drawing board.

  Update 2: after failing to uninstall driver, used HP print and Scan Doctor in order to get the docs on the queue, and how 'delete device '.  After that, couldn't find no port selected in "Print properties", I use the usb port 2, but was not yet registered, usb 1 was for my other printer (Lexmark).  Computer restarted, a second icon p1006 printer/device manager, was listed usb port 2 and was selected.  Printer worked.  Uninstalled first icon legacy p1006, unfortunately the two p1006 icons disappeared.  Computer restarted, windows detected printer and installed, p1006 icon reappeared in Device Manager, usb still selected as port 2.  At the moment the two printers work.  All I have to ' do now is of fig on the flag "yellow" on my pc modem... 8 windows aah.

  Also:
  1. recently installed Office 2010.  In previous versions of windows and Office, had a similar impression of the problems with the hp laserjet p1006 queued default printer.  The fix was to choose Microsoft XPS Document Writer as default, and then select the printer that I want to use in the program when I tried to print a document.  Even once just in case.
  2. having two HP printers (for example a deskjet and a laserjet) downloaded on your computer causes all sorts of problems of print queue.  Has to do with both printers using common files. HP has ever imagined a fix for what I know (haven't checked lately), so if you have an HP printer that is installed, and you want a second printer, you have to buy a different brand as Lexmark for your second printer printer.  Suppport from HP will talk about common files, but not on the installation of a different brand printer, then you will have to take my word for it that it works.

• Looking to download a 64-bit Microsoft Virtual PC version that works on Windows 7 Pro, 64-bit operating system.

  From what I've been able to 'collect', Microsoft Virtual PC may not be compatible with 64-bit operating systems, but if it is true, that I can't seem to find a version of downloadable copy of 32-bit that I can install on my HP Pro Book G3 450 who will install properly & appear in the "Programs and features" section of the control panel possibly listed as: "Windows Virtual PC.

  NOTE: my laptop operating system is: Windows 7 Pro, 64 bit.

  All the tips useful on this topic will be useful, & thanks, Chris Canfield.

  Microsoft provides two specific versions, Windows Virtual PC 32 and 64 bit for PC running Windows 7 32 or 64 bits respectively.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=3702

  You can use the 64-bit package to install and run 32 and 64-bit operating systems.

  Windows6. 1 KB958559 - x 64 - RefreshPkg.msu

  But you must install the package of law for your architecture.