Adpaters/active with the vPort ID load balancing

Looking at the following configuration, my understanding is that some virtual machines in this group of ports will use vmnic1 and some will use vmnic6 (based on their ID vport).  Pretty simple.

Assume that the uplink different swithces cards.  This works because there is no tree blocking one of the unplinks.  Question is: what happens to traffic on vmnic6 if the link fails? (failure of the local liaison, NIC failure, etc. - I'm even not consider upstream failure here).  My understanding is that vmnic1 will not resume because the windows are related to the vmnic6.  Only if there is a Standby adapter is there a link to relief for vmnic6 or vmnic1.  In other words, with vPort (no Etherchannel) of load balancing, two active/active adapters are not 'Standby' to each other.  Is that correct, or am I wrong?

I ask because I see this routinely on customer sites.  But what I always have it set up as a channel of port for a single switch, if two switches or was to be used, then I made active/active and then included a Standby adapter for failover should one Fail of active principles.  Or, if all I need is resumed, not load balancing, I just did a single active/passive and alternate ports between them as a form of manual balancing groups.

I always just assumed Active would not switch to another asset without a port channel/IP-hash config (where the whole reason for standby in the first place).  I'm quite right or completely wrong?  Later today, I want to test this is a lab while monitoring with top.

img.jpg

With the default configuration in your example, the virtual machine-> Teddy assignment is when a virtual machine is running. In the case of a Teddy/link failure the VMs will be assigned to other natachasery. A standby NIC cannot be used unless there is a power failure.

André

Tags: VMware

Similar Questions

  • NIC teaming with the IP hash load balancing

    Hi guys

    I have a virtual machine with a VMXNET3 10 Gbps. It is usually have a heavy traffic with a special server and saturate one of my two physical NIC of 1 Gbps in its PortGroup. I want to know what's going to happen if I turn on "NIC Teaming for this portgroup with basic IP hash load balancing". In my case the source IP address and destination are not change so the aggregates of traffic between my two physical network adapters?

    To avoid saturating completely the two 1GbE NIC, it can also be useful to look in charge based on the grouping and the NIOC. It will ensure that the other streams of traffic VM are not crushed by this machine a virtual when it saturates a network card. The disadvantage is that it requires Enterprise Plus licenses (using a dvSwitch).

  • Lighthouse of unusable probing with the IP hash load balancing.

    I read this in one Web site, but I would like to know the reason for this?

    Is it because the IP hash uses IP source and destination to select the path and so for the markup, it can only detect the failure of the link for one of the trajectory of two?

    Is there some user guide of VMware or documentation that talks about what I can read on this subject?

    Thank you and have a nice week,

    Anthony.

    Please take a look at http://kb.vmware.com/kb/1012819 and the links provided in this KB. This explains why probe headlight does not work with EtherChannel.

    André

  • Network of twinning with Port trunks to support the host ESX VShere 4 with several NIC for load balancing across a HP ProCurve 2810 - 24 G

    We are trying to increase production of our ESX host.

    ESX4 with 6 NIC connected to HP Procurve 2810 - 24G 2 ports; 4; 6; 8; 10 and 12.

    The

    grouping of parameters on ESX is rather easy to activate, however, we do not know

    How to configure the HP switch to support above connections.

    Pourrait

    someone please help with a few examples on how to seup the HP switch.

    Help will be greatly appreciated as we continue to lose tru RDP sessions

    disconnects.

    Best regards, Hendrik

    Disabling protocols spanning-tree on the Procurve ports connected to the ESX host is going to promote a recovery more rapid port. Similarly, running global spanning tree is not recommended if you mix some VLAN iSCSI and data in the same fabric (i.. e. you do not want a STP process to hang storage IO). Spanning tree on your switches, look PVST (or Procurve BPMH) to isolate the STP VLANs unique events.

    In regard to the load balancing is, by default (route based port ID) value algorithm requires less overhead on the ESX hosts.  You may not use LACP on the Provurve the lack of facilities LACP ESX. You must use "route based on the IP hash" sideways ESX and 'static trunks' on the side of Procurve. Unless you have specific reasons why your network need loads this configuration, I'd caution against it for the following reasons:

    (1) IP hash requires thorough inspection of packages by the ESX host, increasing CPU load as load package increases;

    (2) the static configuration puts switch physics rigid and critical ESX host port mapping. Similarly, groups of ports all will fail as the Procurve batteries for management only and won't be on switches 802.3ad circuits Group (i.e. all ports of a group of circuits must be linked to a single switch) - this isn't a limitation of the port ID routing;

    (3) K.I.S.S. love port ID mix of port ID, beacon probe and failover on the port assignments you will get segregation of the raw traffic without sacrificing redundancy - even through switches.

    I hope this helps!

    -Collin C. MacMillan

    SOLORI - Oriented Solution, LLC

    http://blog.Solori.NET

    If you find this information useful, please give points to "correct" or "useful".

  • 2811 - problem with the «failed to load the flash» start

    Hello community,

    I have some problems to use my router from cisco c2811. After accidentley delete flash: / .bin file, my IOS is no longer available. That is why, after a reboot, the router is in a continuous loop with boot: cannot fload 'flash'

    Y at - it any possibiliy to set up the device with the new IOS, which could be installed from usbflash1: for example

    I can't enter break (CTRL + BREAK to the secure CRT) sequence.

    Error code:

    Upgrade ROMMON initialized
    PASSWORD RECOVERY FEATURE IS DISABLED
    load complete, point of entry to the program: 0x8000f000, size: 0xcb80
    load complete, point of entry to the program: 0x8000f000, size: 0xcb80
    loadprog: incorrect file magic number: 0x0
    startup: unable to load "flash:
    C2811 platform of 262144 KB of main memory
    Main memory is configured for 64-bit with ECC active

    Upgrade ROMMON initialized
    PASSWORD RECOVERY FEATURE IS DISABLED
    load complete, point of entry to the program: 0x8000f000, size: 0xcb80
    load complete, point of entry to the program: 0x8000f000, size: 0xcb80
    loadprog: incorrect file magic number: 0x0
    startup: unable to load "flash:
    C2811 platform of 262144 KB of main memory
    Main memory is configured for 64-bit with ECC active

    Upgrade ROMMON initialized
    PASSWORD RECOVERY FEATURE IS DISABLED
    load complete, point of entry to the program: 0x8000f000, size: 0xcb80
    load complete, point of entry to the program: 0x8000f000, size: 0xcb80
    loadprog: incorrect file magic number: 0x0
    startup: unable to load "flash:
    C2811 platform of 262144 KB of main memory
    Main memory is configured for 64-bit with ECC active

    Upgrade ROMMON initialized
    PASSWORD RECOVERY FEATURE IS DISABLED
    load complete, point of entry to the program: 0x8000f000, size: 0xcb80
    load complete, point of entry to the program: 0x8000f000, size: 0xcb80
    loadprog: incorrect file magic number: 0x0
    startup: unable to load "flash:
    C2811 platform of 262144 KB of main memory
    Main memory is configured for 64-bit with ECC active

    Y at - it any possibiliy to set up the device with the new IOS, which could be installed from usbflash1: for example

    To get the G1 SERP to start an IOS (from ROMmon) using the USB, the ROMmon himself must firstly upgraded.

    Then, is there a compact flash currently in the slot?  If so, eject the CF and copy the IOS in CF using a multicard reader.

  • With view 5.1 load balancer

    Hey all,.

    I have a question about to lift our load balancing program and perform in our view environment 5.1.  I followed the article KB 2020913 to get our servers view running with SSL certificates.  I'm doing our load balancer in place and I keep getting errors in SSL certificate.  Here is a brief summary of our facility.  I have two servers to view (VCS1 and VCS2) connection with our internal certificate authority SSL certificates.  There is our program of load balancing.  When you use VMware View Client and go to the view.company.com address of the load balancer, I get "pipe in the certificate name is invalid or does not match.  I click on 'See the certificate' and it is to show the certificate of one of the connection view servers.  A I mess up something with the installation program, or have I missed an obvious solution?  Any help would be appreciated.

    Thank you

    -Kyle

    Hello

    It is the expected behavior. With SSL, the certificate name is checked by report specified by the client host name.

    There are two ways to deal with this. If you are using certificates with another subject of your load-balanced alias name, it all will work.

    for example if you have some certs on each connection to the server (or the Security Server) with the names cs1.myco.com and cs2.myco.com but customers do you think users will connect using a load-balanced alias view.myco.com, then by ensuring that each cert has another name of subject of view.myco.com then the hostname match control work.

    See KB. VMware.com/kb/2006751 for more information.

    Mark

  • Fresh CPU overhead on the IP hash load balancing?

    I read VMware which are disadvantages of IP increased CPU load hash load balancing option memory in the host.

    Who would come to have to do a part of the source IP address and destination of each frame to know what link to put the framework on a hash. This won't be necessary on the Port or MAC based, since this is "hard coded" by VM.

    My question is, what is this overload of the processor? On a fairly modern processor, these calculations would be noticeable, as in less time available for the guests of computer virtual CPU?

    I'm not looking for an exact answer as in ' it takes 2.9 percent of time cpu ", exactly what are your experiences?

    If you do not run your ESX with 80 + % CPU load then overhaed is negligible.

    ---

    MCSA, MCTS Hyper-V, VCP 3/4, VMware vExpert

    http://blog.vadmin.ru

  • With forms 10g server load balancing

    Hello

    I have a client who is just now dealing with a migration from a platform of client-server 6i (using Terminal servers) to a platform of web forms 10 g with several application 10 g standalone servers.

    In the end, customer wants to activate load balancing in order to have some manage to each application server workload.

    The idea to accomplish is to have a hardware load balancer. The customer has already a CISCO CSS 11503 SSL.
    Is there a documentation where I can check more info on compatibility/configuration for this architecture.

    Thank you for your attention.

    Kind regards
    Pedro Ribeiro

    You can check this doc link: [http://download.oracle.com/docs/cd/B14099_19/hpux.1012/install.1012/install/toc.htm]
    It say everything and anything mention on a load balancer, but I'll try to keep the research.

    Greetings.

  • iPhone 5 s can not active with the Apple ID

    My 5s iPhone has just been reset, however, I could not active with my ID to iCloud. A single pop up notification "could not use this apple ID active thi iPhone in the parameter list iCloud, we saw again.» Then, I removed it from the list, but I still can not active there.

    Hi Phuc Bo,

    Looks like you were using your iPhone very well, but after a reset you can activate it no longer.

    Please scroll through this article for help.

    If you can not activate your iPhone - Apple Support

    Best regards.

  • Key and original Windows XP disc has activation with the re-installation problem

    My old machine running on Windows XP Professional exploded in April. I bought a new one and installed the original software (performed by a technician here in SA) disc.

    Microsoft raised a question on the authentic software and I provided all the originals to the Microsoft Help team, but my technician was to get Windows running again may 23 (after 8 days of waiting for a response from the Microsoft Help Center).

    Today the Windows operating system were asked again for activation - but it says that it is enabled.

    However I can not open a session.

    Is the product key: XXXXX-XXXXX-XXXXX-XXXXX-XXXXX

    The bar code on the label said hologram: 99994-625-347-755 b X 12-08297

    THE CASE WAS REFERENCE: 1177290811 and THE DATE was 22/23 May 2012.

    I was dealing with Jatin Gandhi, who has not responded to me since last week when I sent him an e-mail on the caveat on the question of the activation.

    I am running Windows XP because I have the drivers for instruments that are not upgraded to the other windows.

    Concerning

    Margie Hengstberger

    Hi Margie.

    Let me start by saying that is a bad idea to share your first and last name on a public forum. It is just as bad validate your product key. Fortunately, it has been blocked or deleted.

    Then, the majority of us who provide assistance here does not work for Microsoft. We are volunteers who give of our time and our knowledge. Therefore, your file number and the name of the person who helped you is of no consequence to us.

    With that, on the way, we will, if we can solve your problem. It is clear from your message and correct me if I'm wrong, that you have a Windows disk that was used to install Windows Xp on your current computer by some technicians where you live. Validation/activation issues have emerged, now, with the current computer. Apparently the technicians who installed Windows on your current computer gave you the Windows disc. Am I correct so far? If not, please tell me what I'm missing.

    In the interest of time assume that my interpretation of the scenario is correct. I would be very surprised if the disc you received is legitimate. It seems that the computer was in the period 30 trial when you received that would explain why you now get a request to activate Windows. The period seems to be very close to matching the scenario I described as well.

    Personally, if it was my computer and I had paid someone (the technicians who installed Windows) to the computer or to install Windows, I come back to that person and ask it be fixed. I think maybe it's where is the problem and who is responsible for this problem.

    For now, I will provide you with instructions to reset the trial period. However, the number of times that this is limited to four. Therefore, once the new trial has started, you will need to solve this problem one way or another, with technicians who have installed Windows on the computer.

    The trial of Activation reset:
    ------------------------------

    1 turn on your PC

    2 repeatedly press F8 and go to Safe Mode

    3. connect according to the normal
    (Note: administrator password is usually empty, or use the recovery password if CD does not know the password)

    4. leave the Office to fully charge (who answered "Yes" to continue mode without failure)
    (Note: this is just a long way to say go to Safe Mode)

    5. click on start - run

    6 type exactly: rundll32.exe syssetup, SetupOobeBnk (then click OK)
    (Note: a single space after 'rundll32.exe' also the Oo are two letter o in "oobe"; capital and the comma are important)

    7. wait a few seconds (although you won't see any change)

    8 restart your PC normally (start - stop - restart - Ok)

  • No sound from the computer with connected generic speakers VISTA SP2. Symbol pregnant shows active with the Digital Audio device.

    I have vista SP2, I connected to generic stereo speakers using the green light at the back of the computer. Vista does not recognize the speakers. The speaker symbol at the bottom right shows "digital (HDMI) 2 high definition output audio device." It shows active. I had this problem before, and VISTA should pick up 'speakers' something to that effect. I have no sound until it captures "speakers". I can't get VISTA to recognize this. It keeps starting with the digital audio device. Don't know what to do, checked all the forums. It should just pick up these simple generic markets good speakers. Before SP2, I lose sound when VISTA is in standby mode. He would then turn off the stereo speaker and replace the digital output device driver... However since SP2 I can't get VISTA to recognize that I have just connected speakers and not a digital output device.

    Yes, when I uninstalled the driver, THEN shut down the computer and then restarted, he picked up the device high definition audio "speakers" good pilot is NOT the

    "digital (HDMI) 2 high definition audio output device that he used to pick up."

    I now have sound!

    I hope that it stores the right driver now as in the past, when VISTA went into sleep mode, it will disable the speakers, and you have to restart every time.

    Thanks for your help.

    You can add instructions to boumediene, the fact that you must RESTART your computer to search for new drivers, once you uninstall.

  • hard drive crashed reloaded family pack upgrade from windows 7 Home premium and cannot be activated with the Activation Center

    hard drive crashed reloaded windows 7 Edition home premium and now the automatic activation Center said I failed to meet the requirements to activate my copy of windows. I have the keys to the family upgraded to windows 7 Edition pack Home premium.  If I remember correctly which is enough for six computers. then I am owner of a key for windows 7 Professional and three keys for windows 8 Professional I have only 5 computers and we got xp on 3 have windows 8 and the hard drive crashed on my computer with windows 7, replaced the hard drive and reloaded windows 7 and now I can't turn it on. what I am doing wrong?

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

    Please note that the family pack is an upgrade.

    However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

    15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

    So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  • FDMEE with LCMS migration on load balancer

    Hello

    When I click on FDMEE in shared Service, I get "EPMLCM-13000: Service not available"error. "  I don't know if this is the case only because we use a load balancer.

    Some that I am not able to run in one of the environments - 11.1.2.4. Features of FDMEE are very good.

    Is just me or everyone sailing in the same boat?

    Thank you

    AA

    So if SSL is discharged then communication LWA will be on by default http and not the LB will accept that.

    Similar to the Standard deployment topology

    See you soon

    John

  • Someone at - he set up the Insight Log load balancing?

    Hello

    We try to log configuration Insight in a load-balanced, and cluster configuration. After the search tirelessly for blogs, the question on this forum, or other persons who completed it and shared their installation that I found nothing. The only thing that comes close is http://sflanders.net/2014/05/01/log-insight-2-0-beta-load-balancing/ , but indicates only how it will come in a future post!

    I was going to Setup Proxy HA, but from my understanding it will not charge the way UDP traffic that newspapers Insight will want to have it transmitted information. Because we want to send more, otherwise all traffic to syslog to log Insight area, we would need to use UDP 514.

    Those who have actually set up load balancing, you followed a guide? If not, could you share how you accomplished, setting up your environment to balance between several workers?

    Any help is appreciated!

    -Patrick

    Hey Patrick,

    I just posted a more practical guide this morning: http://sflanders.net/2014/06/24/log-insight-external-load-balancer-configurations/

    You can use HAproxy, but if you need UDP, then you're right in that it will not be to your needs. If you are looking for a free/free alternative, take a look at: downloads | Load balancer Zen

    If you have any other questions, please let me know!

  • Trouble with the adapter SQL Loader

    Hi all

    I'm trying to sue the adapter SQL Loader to collect my SQL server instance performance statistics.  I followed the instructions in Appendix A of this document: https://www.vmware.com/files/pdf/solutions/Monitoring-Business-Critical-Applications-VMware-vCenter-Operations-Manager-white-paper.pdf

    Our environment is one vCOps 5.8 vCloud Suite Enterprise license licensed.  SQL server SQL 2008 R2 and is reasonably up-to-date on patches, etc.  (CUA8, I think)

    I've gotten to the point where the database is logged in and my query is running, but it seems that the values returned by the query correspond to default values (0).  I don't know why this is happening, but because the newspapers seem to show the actual values from the database:

    2014-02-10 17:29:50, 438 DEBUG [Collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB - #SELECT "SQL LOADER" ADAPTERKIND, query

    "SQL Server PERFMON STATS" RESOURCEKIND,.

    GETUTCDATE() TIMESTAMP,

    'Agent' RESOURCEKIND,

    "SVC-mgmt-sql SQL Server" RESOURCENAME,.

    (LTRIM (RTRIM (replace ([parameter], ':', '-'))) + "|" + counter_name) METRICNAME1,

    Sum (cntr_value) VALUE1

    FROM sys.dm_os_performance_counters

    WHERE

    (GETUTCDATE() > = (CONVERT (datetime, ' 02/10/2014 17:9:0 ', 101))) AND

    (' 01 / 01/2000 ' < (CONVERT (datetime, ' 02/10/2014-17:29:50 ', 101))) AND

    counter_name in)

    "User connections"

    "Compilations SQL/s."

    "SQL Recompilations/sec."

    "Server memory target (KB)"

    "Total server memory (KB)"

    "Scriptures delayed/s."

    "Checkpoint pages/sec.

    "Page life expectancy."

    'Memory waiting requests',

    "IO Page lock expects."

    "Wait worker."

    "Writing waiting to connect."

    "IO expects network")

    GROUP BY (LTRIM (RTRIM (replace ([parameter], ':', '-'))) + "|" + counter_name)

    ORDER OF TIMESTAMP

    2014-02-10 17:29:50, 467 com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB DEBUG [Collector worker thread 8] (20583) - try to connect...

    2014-02-10 17:29:50, 478 com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB DEBUG [Collector worker thread 8] (20583) - connected...

    2014-02-10 17:29:50, 490 DEBUG [Collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB - QueryExecutionTime = 12

    2014-02-10 17:29:50, 509 DEBUG [Collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB - strMetricCount = 0

    2014-02-10 17:29:50, 533 DEBUG [Collector worker thread 8] com.integrien.adapter3.generalsqldataloader.DataReader.getResourceKeyFromResultSet (20583) - work on resource: SVC - mgmt - sql SQL Server

    2014-02-10 17:29:50, 538 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.isResourceRenameAllowed - rename audit allowed for resource key {resourceName = SVC - mgmt - sql SQL Server & adapterKindKey = SQL LOADER & resourceKindKey = SQL Server PERFORMANCE Monitor STATS}

    2014-02-10 17:29:50, 571 DEBUG [Collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB - resource of treatment: SVC-mgmt-sql SQL Server extract the metric values are 12921

    2014-02-10 17:29:50, 612 DEBUG [Collector worker thread 8] com.integrien.adapter3.generalsqldataloader.DataReader.getResourceKeyFromResultSet (20583) - work on resource: SVC - mgmt - sql SQL Server

    2014-02-10 17:29:50, 624 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.isResourceRenameAllowed - rename audit allowed for resource key {resourceName = SVC - mgmt - sql SQL Server & adapterKindKey = SQL LOADER & resourceKindKey = SQL Server PERFORMANCE Monitor STATS}

    2014-02-10 17:29:50, 624 DEBUG [Collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB - resource of treatment: SVC-mgmt-sql SQL Server extract the metric values are 10

    2014-02-10 17:29:50, 626 DEBUG [Collector worker thread 8] com.integrien.adapter3.generalsqldataloader.DataReader.getResourceKeyFromResultSet (20583) - work on resource: SVC - mgmt - sql SQL Server

    2014-02-10 17:29:50, 626 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.isResourceRenameAllowed - rename audit allowed for resource key {resourceName = SVC - mgmt - sql SQL Server & adapterKindKey = SQL LOADER & resourceKindKey = SQL Server PERFORMANCE Monitor STATS}

    2014-02-10 17:29:50, 626 DEBUG [Collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB - resource of treatment: SVC-mgmt-sql SQL Server extract the metric values are 72869

    2014-02-10 17:29:50, 626 DEBUG [Collector worker thread 8] com.integrien.adapter3.generalsqldataloader.DataReader.getResourceKeyFromResultSet (20583) - work on resource: SVC - mgmt - sql SQL Server

    2014-02-10 17:29:50, 626 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.isResourceRenameAllowed - rename audit allowed for resource key {resourceName = SVC - mgmt - sql SQL Server & adapterKindKey = SQL LOADER & resourceKindKey = SQL Server PERFORMANCE Monitor STATS}

    2014-02-10 17:29:50, 626 DEBUG [Collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB - resource of treatment: SVC-mgmt-sql SQL Server extract the metric values are 17

    2014-02-10 17:29:50, 627 DEBUG [Collector worker thread 8] com.integrien.adapter3.generalsqldataloader.DataReader.getResourceKeyFromResultSet (20583) - work on resource: SVC - mgmt - sql SQL Server

    2014-02-10 17:29:50, 627 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.isResourceRenameAllowed - rename audit allowed for resource key {resourceName = SVC - mgmt - sql SQL Server & adapterKindKey = SQL LOADER & resourceKindKey = SQL Server PERFORMANCE Monitor STATS}

    2014-02-10 17:29:50, 627 DEBUG [Collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB - resource of treatment: SVC-mgmt-sql SQL Server extract the metric values are 72869

    2014-02-10 17:29:50, 627 DEBUG [Collector worker thread 8] com.integrien.adapter3.generalsqldataloader.DataReader.getResourceKeyFromResultSet (20583) - work on resource: SVC - mgmt - sql SQL Server

    2014-02-10 17:29:50, 628 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.isResourceRenameAllowed - rename audit allowed for resource key {resourceName = SVC - mgmt - sql SQL Server & adapterKindKey = SQL LOADER & resourceKindKey = SQL Server PERFORMANCE Monitor STATS}

    2014-02-10 17:29:50, 628 DEBUG [Collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB - resource of treatment: SVC-mgmt-sql SQL Server extract the metric values are 10644

    2014-02-10 17:29:50, 628 DEBUG [Collector worker thread 8] com.integrien.adapter3.generalsqldataloader.DataReader.getResourceKeyFromResultSet (20583) - work on resource: SVC - mgmt - sql SQL Server

    2014-02-10 17:29:50, 628 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.isResourceRenameAllowed - rename audit allowed for resource key {resourceName = SVC - mgmt - sql SQL Server & adapterKindKey = SQL LOADER & resourceKindKey = SQL Server PERFORMANCE Monitor STATS}

    2014-02-10 17:29:50, 628 DEBUG [Collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB - resource of treatment: SVC-mgmt-sql SQL Server extract the metric values are 77

    2014-02-10 17:29:50, 629 DEBUG [Collector worker thread 8] com.integrien.adapter3.generalsqldataloader.DataReader.getResourceKeyFromResultSet (20583) - work on resource: SVC - mgmt - sql SQL Server

    2014-02-10 17:29:50, 629 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.isResourceRenameAllowed - rename audit allowed for resource key {resourceName = SVC - mgmt - sql SQL Server & adapterKindKey = SQL LOADER & resourceKindKey = SQL Server PERFORMANCE Monitor STATS}

    2014-02-10 17:29:50, 629 DEBUG [Collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB - resource of treatment: SVC-mgmt-sql SQL Server extract the metric values are 0

    2014-02-10 17:29:50, 629 DEBUG [Collector worker thread 8] com.integrien.adapter3.generalsqldataloader.DataReader.getResourceKeyFromResultSet (20583) - work on resource: SVC - mgmt - sql SQL Server

    2014-02-10 17:29:50, 629 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.isResourceRenameAllowed - rename audit allowed for resource key {resourceName = SVC - mgmt - sql SQL Server & adapterKindKey = SQL LOADER & resourceKindKey = SQL Server PERFORMANCE Monitor STATS}

    2014-02-10 17:29:50, 630 DEBUG [Collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB - resource of treatment: SVC-mgmt-sql SQL Server extract the metric values are 425692

    2014-02-10 17:29:50, 630 DEBUG [Collector worker thread 8] com.integrien.adapter3.generalsqldataloader.DataReader.getResourceKeyFromResultSet (20583) - work on resource: SVC - mgmt - sql SQL Server

    2014-02-10 17:29:50, 630 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.isResourceRenameAllowed - rename audit allowed for resource key {resourceName = SVC - mgmt - sql SQL Server & adapterKindKey = SQL LOADER & resourceKindKey = SQL Server PERFORMANCE Monitor STATS}

    2014-02-10 17:29:50, 630 DEBUG [Collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB - resource of treatment: SVC-mgmt-sql SQL Server extract the metric values are 11747062

    2014-02-10 17:29:50, 630 DEBUG [Collector worker thread 8] com.integrien.adapter3.generalsqldataloader.DataReader.getResourceKeyFromResultSet (20583) - work on resource: SVC - mgmt - sql SQL Server

    2014-02-10 17:29:50, 631 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.isResourceRenameAllowed - rename audit allowed for resource key {resourceName = SVC - mgmt - sql SQL Server & adapterKindKey = SQL LOADER & resourceKindKey = SQL Server PERFORMANCE Monitor STATS}

    2014-02-10 17:29:50, 631 DEBUG [Collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB - resource of treatment: SVC-mgmt-sql SQL Server extract the metric values are 29360128

    2014-02-10 17:29:50, 631 DEBUG [Collector worker thread 8] com.integrien.adapter3.generalsqldataloader.DataReader.getResourceKeyFromResultSet (20583) - work on resource: SVC - mgmt - sql SQL Server

    2014-02-10 17:29:50, 631 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.isResourceRenameAllowed - rename audit allowed for resource key {resourceName = SVC - mgmt - sql SQL Server & adapterKindKey = SQL LOADER & resourceKindKey = SQL Server PERFORMANCE Monitor STATS}

    2014-02-10 17:29:50, 631 DEBUG [Collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB - resource of treatment: SVC-mgmt-sql SQL Server extract the metric values are 29360128

    2014-02-10 17:29:50, 632 DEBUG [Collector worker thread 8] com.integrien.adapter3.generalsqldataloader.DataReader.getResourceKeyFromResultSet (20583) - work on resource: SVC - mgmt - sql SQL Server

    2014-02-10 17:29:50, 632 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.isResourceRenameAllowed - rename audit allowed for resource key {resourceName = SVC - mgmt - sql SQL Server & adapterKindKey = SQL LOADER & resourceKindKey = SQL Server PERFORMANCE Monitor STATS}

    2014-02-10 17:29:50, 632 DEBUG [Collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB - resource of treatment: SVC-mgmt-sql SQL Server extract the metric values are 0

    2014-02-10 17:29:50, 632 DEBUG [Collector worker thread 8] com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB (20583) - number of records processed 13 - used memory (MB): free Mem in 1757 (Mo): 1104

    2014-02-10 17:29:50, 632 DEBUG [Collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.getDataFromDB - for request #= "SQL LOADER' SELECT ADAPTERKIND,.

    "SQL Server PERFMON STATS" RESOURCEKIND,.

    GETUTCDATE() TIMESTAMP,

    'Agent' RESOURCEKIND,

    "SVC-mgmt-sql SQL Server" RESOURCENAME,.

    (LTRIM (RTRIM (replace ([parameter], ':', '-'))) + "|" + counter_name) METRICNAME1,

    Sum (cntr_value) VALUE1

    FROM sys.dm_os_performance_counters

    WHERE

    (GETUTCDATE() > = %f)) AND

    (' 01 / 01/2000 ' < %t)) AND

    counter_name in)

    "User connections"

    "Compilations SQL/s."

    "SQL Recompilations/sec."

    "Server memory target (KB)"

    "Total server memory (KB)"

    "Scriptures delayed/s."

    "Checkpoint pages/sec.

    "Page life expectancy."

    'Memory waiting requests',

    "IO Page lock expects."

    "Wait worker."

    "Writing waiting to connect."

    "IO expects network")

    GROUP BY (LTRIM (RTRIM (replace ([parameter], ':', '-'))) + "|" + counter_name)

    ORDER OF TIMESTAMP

    RecordCount = 13 FilteredRecordCount = 0

    2014-02-10 17:29:50, 632 DEBUG [Collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.addDefaultData - Default Metrics size after a data loop = 13

    2014-02-10 17:29:50, 633 INFO [collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.addDefaultData - number of default values for this piece of data = 13

    2014-02-10 17:29:50, 633 INFO [collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.DataReader.read - 26 returned query parameters

    2014-02-10 17:29:50, 634 INFO [collector worker thread 8] com.integrien.adapter3.generalsqldataloader.DataReader.updateResourceTimeMapAndRemoveDuplicates (20583) - 26 data 0 resource comments who have been sent the last time.

    2014-02-10 17:29:50, 634 INFO [collector worker thread 8] (20583) com.integrien.adapter3.generalsqldataloader.GeneralSQLDataLoaderAdapter.groupByResource - grouping of resources

    2014-02-10 17:29:50, 634 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 634 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 634 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 634 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 634 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 634 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 634 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 634 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 635 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 635 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 635 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 635 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 635 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 635 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 635 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 635 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 635 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 635 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 636 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 636 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 636 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 636 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 636 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 636 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 636 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2014-02-10 17:29:50, 636 DEBUG [Collector worker thread 8] (20583) com.integrien.alive.common.adapter3.AdapterBase.addMetricData - 1 added metrics to collect the result for the "SVC - mgmt - sql SQL Server" resource, resId = 20584, adapter "GeneralSQLDataLoaderAdapter".

    2

    Has anyone out there dealt with this or found a way around this kind of problem?  There only seems to be a lot of information regarding the use of this (or of the) adapters.

    Thank you

    Jason

    IS to use the option you gave.

    Looks like that time is not the same timezone between solutions if he just started working after 5 to 6 hours. Make sure you that you don't need to use a different zone such as GMT.

Maybe you are looking for

  • I need to update my firefox latest version

    I'm not a technical person. I tried to update firefox due to a pop-up message on my old version. I followed the instructions to click on Firefox Help, then select about firefox. Then, I was ready to install it and restart. But then he asked me to go

  • USB drive w / CDRom virtual stalls Desktop

    Hello Toshiba laptop of a friend must be updated by key USB WLAn (from Chello.at) and mobile internet (for AON.at): Thoshiba SPA40 GR, model no PSA45E - 0024 M - Gr. Windowx XP SP3, IE8, Avast AV, Ashampoo Firewall; System clean and free of errors. I

  • Fingerprint reader not working not not after sleep

    So, I've mentioned this problem in a previous post and was directed here http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67245 which is a patch that could solve this. This patch did not work. What happens when my

  • Acer aspire 5732z wait almost exactly a minute at the start

    I have an acer aspire laptop 5732z (now Windows 10) as I'd first of all several years ago was a delay of 1 minute at the start (but usually not re - starts). If I turn it on closing down the blue disk activity light flashes - and then he lowers very

  • Vista will not start even in safe mode

    Download service Pack 2 electric exploded Vista start the system restore / boot cannot fix blue screen with stop: 0x0000c1f5(0x00000000,0x00000000,0x00000000,0x00000000), can anyone help thanks