Advanced local network service

Similar Questions

• Simulator of impossible to connect to the local network services

  Hi all.

  I'm sure this has been answered somewhere, but I can't.

  I have the sim card of the installed 0.9.3 Playbook and (especially) work. It accesses the internet just fine, apps to load and run thin.

  However, what I can't do is access of local network services. I tried even by its IP address and just make mistakes.

  I don't have a DNS server on my local network right now, but could create one, if it helps.

  Any suggestions?

  Hey,.

  try to change the adapter settings in your VMware Player for 'bridge' and restart it. This will give you an actual IP your simulator of the router connecting all your networked computers and the Simulator and he will be treated like any other computer. hope that helps. Good luck!

• IAC Advanced Network Services configuration

  I have not been able to find documentation on how to use the features of advanced EPC network services.

  I am interested in the use of services VSG & Netscaler 1000V.

  Is there a guide for deployment of these services?

  Thank you

  Graham

  Better documentation I could find so far on this is the PDF file below, it provides the guide of full deployment of the infrastructure until the IAC software layer layer.

  http://www.Cisco.com/c/dam/en/us/TD/docs/solutions/Enterprise/Data_Cente...

• Satellite Pro A100 has "limited or no connectivity" & no connection to the local network

  Hello!

  I + really + hope someone might be able to help with this - been going slowly crazy.

  Bought my A100 18 months ago in Australia while I lived there and had no trouble to connect to LANs and others with my wireless. Everything was shipped over to me (here in London) last week and everything seems to have gone pear shaped. The House I live in has Wireless Broadband comes with our Sky Cable subscription, working on (I think - there is no real marking on the device) a router wireless Netgear A/G dual band (108 Mbps 802.11 b/g network). My laptop model is: SatellitePro A100 (part No.: PSAACE-007002EN) and it works on the following network hardware (drivers installed in brackets):

  1394 net adapter (5.1.2535.0)
  Intel(r) PRO/1000 PL Network Connection (9.2.24.0)
  Intel (R) PRO/Wireless 3945ABG Network Connection (10.1.0.13)

  I used the Sky Broadband installation disc to set up the network, but every time I try to connect it tells me that I have "Limited or no connectivity" and will not let me online. I've been on the phone for Technical Support of sky for hours, trying to get this sort, but when I plug in the Ethernet cable to the laptop it will not even get to communicate directly with the router (i.e. put the IP address of the router in explore and view the settings of the router). My 'Connectivity Doctor' shows there is a problem with my wireless connection (which the network has not assigned a network address of the computer), but no problem with my ethernet connection and yet neither will allow me to get online and every time that I try to repair the wireless connection I get an error message saying that Windows could not renew the IP address.

  I have disabled the Bluetooth, reset the router I don't know how many times and made sure that all cards have been activated and crosses without bad red and yellow exclaimation in Device Manager. All network devices seem to be "working properly" (according to the properties of the device).

  After days of weeding through the proverbial haystack of resources online while at work, I think that the problem is either something very simple (i.e. a setting random advanced configuration). I read somewhere as you will need to 'install' the router on the system, and that is not "plug and play" as Sky Broadband seems to have deduced by phone... but I would have thought the installation CD has done this, as when I discovered my connections (when the Ethernet cable is plugged in), it recognizes the connection (it won't only ++ anything). If there is no specific process I need to follow in order to properly install the Netgear router (for which I am currently trying to see if there are appropriate drivers, I need to download), I'd appreciate a lot of the age of enlightenment! It could also be a question that I need to reset the network key in the security settings of the router, as there are already three computers in the House connected to the network... but of course I can not do without first sorting on why my laptop can still communicate with the router via the Ethernet connection.

  Points to note:
  -My laptop runs on Windows XP Professional Version 2002 Service Pack 2
  -The disc to install Sky Broadband installed Internet Explorer 7. the last time I was online, I think that I was still using 6.

  If anyone could be of any use to solve this puzzle, you have earned yourself my eternal gratitude!

  -Danielle

  Hello

  I think that the solution should be simple;
  I presume that you TCP/IP settings are false. I mean that the settings should be set to automatically assign the IP address.

  Please check this box. Simply go to the network connections-> local network connections TCP/IP properties properties

  He put everything on automatic

• comments authorization access local network

  I have facility accessible from the internet (with encryption) using a mac mini with OS X server & airport extreme, mapping, but I would like to make a share accessible to the comments for my local network to share files. If I understand correctly, with port mappings, I now sharing comments accessible can be used by anyone knowing my ip/hostname. Is there a logical way to separate it? I was able to give to everyone on my LAN users or is there a simpler way?

  Chills run to the top of my spine.  I guess that you have open SMB in the world?  I know it might be convenient, but it is not wise to expose this service.  Ideally, I would recommend the service behind a VPN security.  Yes, your users will have two stages (auth to the VPN and then connect to file sharing), but your environment will be safer.

  Now, if you choose to leave the open port, the only way to safely reach a share of comments on the local network is to use a protocol that is not passed through the firewall.  For example, SMB is available to authenticated users on WAN and LAN, but AFP is available only on the local network and it supports the part of comments.  I still recommend perimeter security, but it is a "logical" way to separate.

  In addition, using unique connections is highly encouraged.  This brings back us to the ineffectiveness of a shared wireless key.  Once share you it, it is no longer a secret.  If you have 10 people on staff, and everyone knows the password wireless, which prevents the person driving to the office Friday shot you Sam and connect to your network?  Implementation of services of files with accounts of common use is just as bad.  A little lame like every password changes a Wi - Fi, person network all changes the credits has no password.  For that freelance account with the freelance password remains, even after crossing 10 freelancers.  What happens if we decide to be malicious?

  Protect your network.  Protect your data.

  Reid

  Apple Consultants Network

  'El Capitan Server - Foundation Services.

  «El Capitan Server - Collaboration & control»

  'El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store

• Connection to the local network after the connection to the Client AnyConnect Secure Mobility Client

  I connect to my network of business using Secure Mobility Client of Cisco AnyConnect.  Once connected, I can no longer print on my printer LAN attached and other local resources.  I use the router E4200 of Cisco/Lyncsys on my local network and can re - connect to storage on the local network by putting in place of Port Forwarding port 21 and the sharing of MS Windows FTP folders.  However, I can't connect to a client of the Terminal Services by transferring port 3389.  Is there a way to connect to the local LAN after scoring in the VPN connection.  I can connect to sites HTTP/HTTPS regulars and more than another type of connectiins, just not my own local resources.

  Thanks in advance... JS

  Happy to help, for what it's worth. Please mark question as answered if it is indeed and rate if the response is useful.

• AnyConnect client can not access local network

  Hello

  I have a problem with the Cisco anyconnect. Once clients are connected they cannot access anything whatsoever, including their default gateway.

  Pool of the VPN client is on the same subnet as the LAN (139.16.1.x/24). Local network clients can access DMZ, VPN clients can ping computers on the local network, but they cannot access the DMZ.

  I guess that any rule providing that traffic is absent but I m new with Cisco ASA and I m totally lost. I read as much as I could on this topic, but I do not understand which rule is necessary.

  Thank you very much in advance for your support.

  ASA release 9.4 (1)
  !
  ciscoasa hostname
  activate the encrypted password of WmlxhdtfAnw9XbcA
  TA.qizy4R//ChqQH encrypted passwd
  names of
  mask 139.16.1.50 - 139.16.1.80 255.255.255.0 IP local pool Pool_139
  !
  interface GigabitEthernet1/1
  nameif outside
  security-level 0
  192.168.1.100 IP address 255.255.255.0
  !
  interface GigabitEthernet1/2
  nameif inside
  security-level 100
  IP 139.16.1.1 255.255.255.0
  !
  interface GigabitEthernet1/3
  nameif DMZ
  security-level 50
  IP 172.16.1.1 255.255.255.0
  !
  interface GigabitEthernet1/4
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet1/5
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet1/6
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet1/7
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet1/8
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  Management1/1 interface
  management only
  nameif management
  security-level 100
  11.11.11.11 IP address 255.255.255.0
  !
  passive FTP mode
  network obj_any object
  subnet 0.0.0.0 0.0.0.0
  internal subnet object-
  139.16.1.0 subnet 255.255.255.0
  network dmz subnet object
  subnet 172.16.1.0 255.255.255.0
  wialon Server external ip network object
  Home 192.168.1.132
  wialon-Server network objects
  Home 172.16.1.69
  Wialon-service-TCP object service
  destination tcp source between 1 65535 21999 20100 service range
  Wialon-service-UDP object service
  destination service udp source between 0 65535 21999 20100 range
  network of the NETWORK_OBJ_139.16.1.0_25 object
  subnet 139.16.1.0 255.255.255.128
  outside_acl list extended access permit tcp any object wialon-Server eq www
  outside_acl list extended access allowed object Wialon-service-TCP any wialon-server object
  outside_acl list extended access allowed object Wialon-service-UDP any wialon-server object
  pager lines 24
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  MTU 1500 DMZ
  management of MTU 1500
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  NAT (inside, outside) static source any any static destination NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 non-proxy-arp-search to itinerary
  !
  network obj_any object
  dynamic NAT (all, outside) interface
  internal subnet object-
  NAT dynamic interface (indoor, outdoor)
  wialon-Server network objects
  NAT (DMZ, external) service wialon Server external ip static tcp www www
  Access-group outside_acl in interface outside
  Route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  identity of the user by default-domain LOCAL
  Enable http server
  http 11.11.11.0 255.255.255.0 management
  http 139.16.1.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  service sw-reset button
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  Crypto ca trustpoint ASDM_TrustPoint0
  registration auto
  domain name full ciscoasa.srdongato.null
  E-mail [email protected] / * /
  name of the object CN = srdongato
  Serial number
  Proxy-loc-transmitter
  Configure CRL
  Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
  registration auto
  full domain name no
  name of the object CN = 139.16.1.1, CN = ciscoasa
  ASDM_LAUNCHER key pair
  Configure CRL
  trustpool crypto ca policy
  string encryption ca ASDM_TrustPoint0 certificates
  certificate 09836256
  30820381 30820269 a0030201 02020409 83625630 0d06092a 864886f7 0d 010105
  05003050 31123010 06035504 03130973 72646f6e 6761746f 313 has 3012 06035504
  05130b4a a 41443139 32323033 34343024 06092, 86 01090216 17636973 4886f70d
  636f6173 612e7372 646f6e67 61746f2e 6e756c6c 31353132 30353036 301e170d
  5a170d32 33333535 35313230 32303633 3335355a 30503112 30100603 55040313
  09737264 6f6e6761 30120603 55040513 31393232 30333434 0b4a4144 746f313a
  2a 864886 30240609 f70d0109 6973636f 02161763 6173612e 7372646f 6e676174
  6f2e6e75 6c6c3082 0122300d 06092 has 86 01010105 00038201 0f003082 4886f70d
  010a 0282 010100d 2 295e679c 153e8b6a d3f6131d 8ea646e3 aa0a5fa9 20e49259
  ca895563 7e818047 033a4e8f 57f619e9 fa93bfd5 6c44141f b0abf2c0 8b86334e
  bac63f41 99e6d676 c689dcf7 080f2715 038a8e1b 694a00de 7124565e a1948f09
  8dbeffab c7c8a028 741c5b10 d0ede5e9 599f38fe 5b88f678 4decdc4b b 353, 6708
  cfa2fbce f58be06e 18feba56 4b2b04a1 77773ec6 5c58d2ed d7ca4f17 980f0353
  138bfe65 1b1165e6 7b6f94bb ab4d4286 e900178c 147a6dba 2427f38e e225030f
  0a66d1eb 5075c57e 6d77e5bb 247f5bc3 8d3530f0 49dedf2d 21a24b5f daa08d98
  690183cf e82a6b8d 5e489956 c5eecdbc 7fc2365c b629a52b 126b51e2 18590ed5
  c9da8503 a639f102 03010001 a3633061 300f0603 551d 1301 01ff0405 30030101
  ff300e06 03551d0f 0101ff04 86301f06 04030201 23 04183016 80143468 03551d
  dec79103 0a91b530 1ada7e47 7e27b16d 4186301d 0603551d 0e041604 143468de
  c791030a 91b5301a da7e477e 27b16d41 86300d 86f70d01 01050500 06 092 a 8648
  003cdb04 03820101 8ef5ed31 c05c684b ad2b0062 96bfd39a ecb0a3fe 547aebe5
  14b753e7 89f55827 3d4e0aa8 b8674e45 80d4c023 8e99a7b4 0907d 347 060a2fe4
  fa6e0c2f 3b9cd708 a539c09f 7022d2ee fb6e2cf6 82b0e861 a2839a71 1512b3ec
  e28664e9 732270c 9 d1c679d9 1eaf2ad5 31c3ff97 09aae869 88677a3d b 007, 5699
  ecb3032e 2dd0f74f 81f9a8fb 79f30809 723bbdbf dfef4154 5ad6b012 a8f37093
  481fa678 b44b0290 23390036 042828f3 5eefdc43 ebe52d26 78934455 9b4234a9
  4146 166e5adc b431f12f 8d0fbf16 46306228 731c bfeebc43 34 76984 d2e6ebbc
  88ca120a 96838694 d4f32884 963e7385 987ec6b0 dfa28d49 05ba5fa8 641bcfc7
  ff92ac3c 52
  quit smoking
  string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
  Certificate 0 is 836256
  308202cc a0030201 0202040a 0d06092a 83625630 864886f7 0d 010105 308201b 4
  05003028 06035504 03130863 61736131 13301106 03550403 6973636f 3111300f
  130a 3133 392e3136 2e312e31 31353132 30353036 35363236 5a170d32 301e170d
  35313230 32303635 3632365a 30283111 55040313 08636973 636f6173 300f0603
  61311330 11060355 0403130 3133392e 31362e31 2e313082 0122300d 06092 has 86
  4886f70d 01010105 00038201 0f003082 010 has 0282 010100e7 a5c16e86 16c15a10
  e018b868 bac7271a 30f1a3f8 ecb9c6b8 3ed4b1ad c9468f5e 287f2a7a 644f1496
  c43a061e da927d09 a755b53e ed7c6a66 f2f1fb1e f944345c 86e08ce0 891c99b3
  13101ab3 04963fad f91f987f 99f22a89 cd1e8c5a 5e4c026d 2cadd7b7 6620bbd1
  b4a5135b 24ec886f fa061a06 dd536e96 1e483730 756c 4101 23f83a8d 944a7fbe
  93c51d56 32ac0d17 ceb75f63 0ae24f07 f2c54e83 5b84ff00 16b0b899 c925c737
  1765b 066 23 b 54645 bc419684 d09dd130 c1479949 68b0a779 df39b078 6fb0deb9
  758b14c3 f0801faf f0ad60e1 a018ffba d769f867 3fe8e5fc 88ccc5b2 2319f5d4
  617a78c4 74e7a64b 5c68276c 06ea57c1 d0ffce4b 358c4d02 03010001 300 d 0609
  2a 864886 05050003 82010100 dff97c9f 4256fd47 8eb661fd d22ecea4 f70d0101
  589eff09 958e01f1 a435a20e 5ed1cf19 af42e54d d61fc0ab cb2ee7ac 7fcb4513
  1a44cc86 1e020d72 3a3f78d2 4 d 225177 857093d 9 f5fcf3c7 6e656d2b 54a0c522
  f636b8cf 33c5ae34 ea340f32 85dff4c1 50165e7a e94de10b ced15752 0b3a76c1
  2a50777b 20291106 a1a8a214 a 8 003716 680c15d4 ac3f7cc7 378f8f5f 38e3403f
  f958c095 e549c8ed 4baf8cc5 bdcd230e 260754ea 953c3a4c eb01fef5 62b97e01
  9f82ce6b f479dbdd 000c45af 8758b35f b4a958ee 32c4db3f 2ddc7385 dc05b0e3
  78b609ba a9280841 2433ae87 5dd7a7c2 d5691068 1dc0eddc c23f99c5 3df8b1a5
  aadbd82a 423f4ba8 563142bf 742771c 3
  quit smoking
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev2 activate out of service the customer port 443
  Crypto ikev2 access remote trustpoint ASDM_TrustPoint0
  Telnet 139.16.1.0 255.255.255.0 inside
  Telnet 11.11.11.0 255.255.255.0 management
  Telnet timeout 5
  without ssh stricthostkeycheck
  SSH timeout 5
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  dhcpd outside auto_config
  !
  dhcpd address 172.16.1.69 - DMZ 172.16.1.69
  dhcpd dns 87.216.1.65 87.216.1.66 DMZ interface
  dhcpd option 3 ip 172.16.1.1 DMZ interface
  dhcpd enable DMZ
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  SSL-trust outside ASDM_TrustPoint0 point
  SSL-trust ASDM_Launcher_Access_TrustPoint_0 inside point
  Trust ASDM_Launcher_Access_TrustPoint_0 inside the vpnlb-ip SSL-point
  WebVPN
  allow outside
  AnyConnect image disk0:/anyconnect-win-3.1.12020-k9.pkg 1
  AnyConnect profiles Wialon_client_profile disk0: / Wialon_client_profile.xml
  AnyConnect enable
  tunnel-group-list activate
  Disable error recovery
  internal GroupPolicy_Wialon group strategy
  attributes of Group Policy GroupPolicy_Wialon
  WINS server no
  value of 192.168.1.1 DNS server
  client ssl-VPN-tunnel-Protocol ikev2
  by default no
  WebVPN
  AnyConnect value Wialon_client_profile type user profiles
  dynamic-access-policy-registration DfltAccessPolicy
  wialon_1 Wy2aFpAQTXQavfJD username encrypted password
  wialon_2 4STJ9bvyWxOTxIyH encrypted password username
  remote access to Wialon tunnel-group type
  attributes global-tunnel-group Wialon
  address pool Pool_139
  Group Policy - by default-GroupPolicy_Wialon
  tunnel-group Wialon webvpn-attributes
  enable Wialon group-alias
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:447ec315ae30818a98f705fb1bf3fd75

  Hello

  You don't have NAT exemption the DMZ network to the pool of VPN traffic.

  Please try to add the following statement to run:

  nat (DMZ,outside) 1  source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 route-lookup

  Also please delete the existing instruction manual nat "non-proxy-arp" statement, because it can cause problems like you the ip subnet address pool is identical to that of the Interior of the network.

  no nat (inside,outside) source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 no-proxy-arp route-lookup
  
  nat (inside,outside) 1 source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 route-lookup
  
  

  Cordially Véronique

• Re: Satellite Pro A40 - connection to the local network

  Hello

  My names Andy and not bieng a total beginner computer, I tried to install all the drivers for my laptop model a SPA40 old fathers PSA45E-001VM-EN. (European model I think) everything looks ok, except that I can't get the ETHERNET driver.

  When I go into the Device Manager there is NO controller network displayed in the list and there is a yellow exclamation mark against two controllers ethernet ib the OTHER DEVICES tab looking here, I downloaded the atheros wlan xp file - 7704062.zip, broadcom wlan xp - installed 5604835.ziplan20070912134727.zip and nothing changes, we used to be able to go on the net and with the wifi card in the pci slot wireless go so I know its capable I think it's just the order of drivers and the drivers themselves,

  Then someone can point me in the right direction before as I have send myself crazy with this...

  You can

  regards and thanks in advance

  Andy

  Hey,.

  The drivers that you downloaded are WLAN Card and has nothing to do with the connection to the local network (Ethernet) normal

  I think you should check the Web from Toshiba site to download the latest LAN driver. You can find the drivers for Satellite Pro A40 in * archives *.
  ttp://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp h

• Satellite A105-4114 will not recognize the connection to the local network

  Whenever I plug my cable ethernet to ethernet port on my laptop, the ethernet port does not recognize my cable, even if the lights are flashing. I updated my LAN driver a week ago, and it has not really helped. My internet service is provided by my apartment complex at the school, but I don't think it has anything to do with it, because I had this problem last year living in dorms and at home. I have to restart my computer everytime for my computer to recognize the connection to the local network. Can someone help me please?

  Driver: Intel (r) PRO/1000 PL Network Connection

  Wireless connection works fune.

  Hello

  First of all, you should check your LAN cable.
  Sometimes the laptop may not be correctly connected to the LAN as a result of a defective cable.
  In addition, you should check if the network card is properly recognized in Device Manager. He should t be a yellow exclamation!
  In addition, you must check the settings for the TCP/IP protocol in the LAN card properties.
  TCP/IP must be set to automatic. I assume that you are connected to a server and the server supports supported a range of IP addresses and assigns it automatically.

  Last but not least check if you are using the latest version of the BIOS.

  Welcome them

• The local network settings for arbitrarily lose connectivity with ADSL modem

  Hi all

  I have a SAGEM 1500WG ADSL modem for internet connection and a laptop Satellite A100 (PSAA9). I noticed that arbitrarily, the ALARM led on the modem of DSL connection worked again (according to the lights on the modem) and the real problem was that I couldn't ping my modem. The problem was inside my local network. I can't be sure that what happened outside my LAN because I could not reach even the modem.

  The only solution is to reset the modem. After 4-5 months of use, I have concluded that, whenever this was happening, I used Azureus to download a movie and this download was pretty slow (for example because my counterpart have fast connection). Also, I was connected with wire and NOT using the modem wireless. This means that: the problem never appeared when the wireless or Azureus works and download a significant amount of data.

  I wonder if the LAN driver has any firewall installed on it. Or if she has any function that transforms the power driver LAN offshore when there are very few or no data go through it for a certain period of time.

  Or East-Azureus has any odd décor that reminds you of something above?
  The combination I think is problematic is "adapter LAN + Azureus work + very little data being downloaded. Maybe I'm a little confused. Anyone who has experienced the same problem or can come up with an idea will be extremely useful.
  Thank you very much.
  Lambros

  Hello

  Don t think that there is a problem with the LAN settings or the LAN driver on the device!
  Your data transmission to low and transfer depends on your service provider Internet (ISP) and the server.
  Your Azureus application does not for me, but in my easy it s a transfer of connection and the data of the software simply PEAR-pear file also depends on the number of users and the connected clients

• Mountain Lion Vs Mavericks (local sync services)

  Greetings!

  I'm currently under Mountain Lion. I would use the last Safari and have places works again in iPhoto. I understand that this requires upgrading at least Mavericks. I read elsewhere on this forum that will disable sync services local to the calendars between my 5s (also running iOS 9.2.1) iPhone and my MacBook Pro. However, according to Wikipedia (accessed today) local sync services have been reactivated in Mavericks 10.9.3 then (possibly and if all goes well);  ID is 10.9.5.

  I really want to know the truth about it, and if the local sync is always possible with the Mavericks (as if it isn't I'll save me the effort of ad time to upgrade at all).

  Thank you in advance...

  Unless you previously downloaded the installer from the App Store, Mavericks and Yosemite are no longer available.

  Information, discuss your issue.

  How to sync an iPhone with OS X Mavericks locally? iCloud is NOT an option.

• Setting up a local network private through the device that extracts public wifi internet

  I travel a lot in a RV I don't have a continuous Internet connection wherever I go, usually a public wifi some Camping I am for. I have several devices that I use, but I don't want that they are open to the public wifi network. I've had people send photos from their phone to my Xbox so that I use and I want to be more secure and control my devices.

  I have a knowledge of basic networking. I was able to use my laptop to connect to a public wifi and then share the connection through Windows on the LAN ethernet port. I then connect that to my old Netgear DGND3700v2 DSL model with its DHCP function disabled. It worked for several months now, and I am able to connect to the ports of my router modem and lan with my devices. But some games on the xbox does not work because I can't redirect ports or control static and other IP addresses. I think that there should be a much easier way to do it.

  I looked in my router Repeater functions, but I don't think that's the way I need to go. I have no access to the routers of the campsites configure them as bases. I need something that will pull simply bind an existing wifi and then deliver this private to my LAN connection.

  Thanks in advance for any advice.

  It worked perfectly. I bought a Netgear AC1200 and easily plugged into the local public wifi. I then wired to the LAN cable/Fiber gray on the Netgear router port and then reset the router ran smart installation thereon and he set up hands down with a new local network on a separate ip address range. Now all my devices independently connect to my router via wifi or LAN and use internet through the Extender without that person outside to get in and I don't have my laptop of aging on all the time to do so.

• Access to distance running OS x server local network

  I have a 2 person office with a local ethernet network connected to the internet via wifi provided by office building. Is there an easy way to connect to my server from Home Office? I have osx server updated to el capitan running on a mac mini. My colleague is connected using GoToMyPC, but I want to put in place so that I don't have the extra cost of this service if I can.

  To run a public VPN server behind a NAT gateway, you must do the following:

  1 give the bridge either a static external address or a dynamic DNS name. It must be a DNS record a public DNS record, not on the server itself. Also, in the latter case, you must run a background process to keep the DNS record update when your IP address changes.

  2. give the VPN server a static address on the local network and a host name that is not in the 'local' top-level domain (which is reserved for the Hello).

  3 transmit external ports 500 and 4500 1701 (for L2TP) UDP and TCP 1723 (for PPTP) port to the corresponding ports on the VPN server. The app Server can set this up for you if you have a router from Apple.

  If your router is an Apple device, select the AirPort network utility and click Network Options. In the leaf opens, check the box marked

  Allow inbound IPSec authentication

  If this isn't already done and save the change.

  There may be a similar setting on a third-party router.

  4. configure the firewall in use to pass this traffic.

  5. in the sidebar of the application server, select the server name, then select the Access tab. Access to the network for VPN service must be all the networks, if you want customers to be able to connect from anywhere.

  If you have followed all the steps above, the server application must show that the VPN service is accessible from the Internet to the external IP address. Otherwise, something in the network is blocking some of the required traffic. Some residential ISPS block incoming UDP packets redirected. If yours is by doing this, you will not be able to set up a virtual private network.

  6. each client must have an address on a network block that don't overlap one assigned by the VPN endpoint. For example, if endpoint affects addresses in the 10.0.0.0/24 range, and that the client has an address on a local network in the range of 10.0.1.0/24, it's OK, but if the LAN is 10.0.1.0/16, there will be a conflict. To reduce the risk of conflicts of this kind, it is preferable to address assignment to a random subblock of 10.0.0.0./0 with a mask of 24 bits.

  7. "back to my Mac" is incompatible with the VPN service. It should be disabled on the server and on an AirPort base station, if necessary.

  8 Hello won't work on an L2TP or PPTP VPN. To make services accessible through the tunnel, you need a DNS service work.

  If necessary, services such as mail must be configured to listen on the block assigned to the VPN clients network.

  9. If the server is connected directly to the Internet rather than being behind a NAT, see this blog.

• Windows wants to renew the IP address for the local network 2 to repair but cannot and says: network support contacts Manager. Don't know what to do

  Recently went to microcenter and added 2 GB memory and ethernet for cable service connection to the computer. Perhaps this new connection is LAN 2...

  Please elaborate on what has been done to add "an Ethernet for cable service."

  Please describe the physical connections from your computer to the Internet (i.e. where make the thread go?).

  What version of Windows you have, including the service pack (right click on desktop and select Properties, if you do not know)?

  Open network connections (start > run > ncpa.cpl > OK).
  What icons are listed?
  Click on each connection to the Local network and review the blue column on the left side of the window, at the bottom under the heading.  Please provide the information displayed (unfortunately, it cannot be copied, so you do not have to re - type).

• Windows XP (SP3) refuses to allow the addition of "Network Service" as a user of the service DCOM.

  DCOM error 1016 Windows XPx32

  Several solutions, all virtually identical to this question:

  Machine default permission settings grant Local Activation permission for the application server COM with the CLSID
  {A4199E55-EBB9-49E5-AF1A-7A5408B2E206}
  the user NT AUTHORITY\NETWORK SERVICE SID (S-1-5-20). This security permission can be modified using the Component Services administrative tool.

  However, the error persists;  Windows XP (SP3) refuses to allow the addition of "Network Service" as a user of the service DCOM.  The question was supposed to be fixed in a service pack, patches, etc., but he persists.  This despite the change permissions to allow that user permissions in HKCR | CLSID. {"clsid :} or HKLM\Software\Classes\AppID.

  Now what?

  Hi Ronegade,

  I suggest that you follow the steps in the article mentioned below.

  The event 10016 may be logged in the system log on a computer that is running Windows XP Professional x 64