Extend Proxy hangs after restart of the Cluster

Similar Questions

• After restart of the firmware upgrade

  Hi, I need to update the firmware on my controllers PS6100 EqualLogic.

  I found the instructions on how to do it and everything seems straight forward to do so via the GUI.

  I noticed there is a necessary restart after the firmware has been applied. Does this mean I have to gracefully shutdown the virtual machines running on my SAN LUNS? My iSCSI connections will be closed/broken during the restart of the post firmware upgrade?

  Thank you, Oliver.

  Hello Oliver,.

  In the same area download notes firmware and release is another PDF, entitled ' iSCSI initiator and optimize your SAN environment for high availability operating system considerations ", which includes some key parameters that will allow your computers virtual and servers through the failover time.  It is important that not only the Firmware update, but in the case of an unexpected failure due to a failure of CM.

  More if you use VMware ESXi, there is a best practices PDF for that as well.  In addition to better manage the failover, these changes have shown to improve performance as well.

  The Tech report TR1091 is available here:

  http://en.community.Dell.com/TechCenter/Extras/m/white_papers/20434601/download

  Changes for Windows and the knots of ESXi virtual machines will require a reboot to take effect.

  What version of firmware you are at, and what version you are migrating towards?

  Other things I always propose updates is to ensure that both controllers are plugged in your switch and in the VLAN correct.  Since assets CM are failed over to the passive, support gets much advertising is unable to access the storage after firmware update.  Or ports of the day before were not in the VLAN correct, or individuals with disabilities, etc...

  It is for these reasons that personally I prefer to do the updates via the serial port CLI.   The process is more talkative, and if something should go wrong, you need the serial port of some sort.   Since the installation and tested in advance is a huge time saver.   Here, we use serial mux so that all array controllers are easily accessible.

  Kind regards

  Don

• vFRC shows no free space after restart of the vcenter

  I have a new cluster I implement vFRC on. The cluster runs great and the vFRC which seems to work without problems. Unfortunately to restart my VCenter the hosts in the cluster always show all they have vFRC installed, but show 0 MB of available space. The only way to clear it is to place the host in maintenance mode.

  It is of course difficult since it happens to all hosts on the cluster at the same time. Forces me to each stop all the VM on a host or disable vFRC on the virtual machine to a host to get into maintenance mode.

  Anyone know if this is expected behavior?

  or if there is problem kb/known, and I'm not finding?

  or a good direction to go to diagnose why this is happening?

  I am running

  6 3018524 on windows 2012R2 vCenter fully patched

  ESXi 6 u1 3380124

  Reference Dell servers R730

  vFRC on intel P3600 (NVMe interface)

  How your vCenter is allowed? EntPlus?

  What type of shared storage do you have? What is a San with an option of Flash?

  I've been looking for KB and found this one. Have you seen this one yet? http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2136867

  Otherwise, I found the list of best practices in the guide of vFRC 5.5, which remain valid for the v6, and I would check that these are achieved before continue.

  https://www.VMware.com/files/PDF/Techpaper/vfrc-perf-vsphere55.PDF

• Blocking of data after restart of the success

  Hi guys,.
  
  I'm stuck in a process where my DB starts but after a few seconds his begins to close all processes of sorting.  The system worked perfectly before but after todays restarted that's what happening.
  
  the following is the log from start-up to shutdown. Can help them understand what is causing this problem any one.
  
  It comes to ORACLE 11 G on LINUX business. _
  
  
  Mon Aug 13 13:12:28 2012
  Starting ORACLE instance (normal)
  Large information Pages *.
  
  Total shared global area in large Pages = 0 KB (0%)
  
  Large Pages used by this instance: 0 (0 KB)
  Large wide Pages unused system = 0 (0 KB) (alloc incr 16 MB)
  Large Pages configured wide system = 0 (0 KB)
  The Page Size = 2048 KB
  
  RECOMMENDATION:
  Total size of Global region shared is 4098 MB. For optimal performance,
  before next restart of the instance, to increase the number
  unused wholesale Pages by 2049 2048 Pages atleast big Ko (4098 MB)
  scale to get 100% of the Shared System
  Global area allocated by using large pages
  ***********************************************************
  LICENSE_MAX_SESSION = 0
  LICENSE_SESSIONS_WARNING = 0
  Shared memory for the instance of created monitoring segment
  SNA system picked latch-free 3
  With the help of LOG_ARCHIVE_DEST_1 parameter value by default as USE_DB_RECOVERY_FILE_DEST
  Autotune undo retention is enabled.
  IMODE = BR
  ILAT = 28
  LICENSE_MAX_USERS = 0
  SYS audit is disabled
  Commissioning:
  Oracle Database 11 g Release 11.2.0.3.0 - 64 bit Production.
  ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/db_1
  Name of the system: Linux
  Name of the node: OM5000
  News Release: 2.6.18 - 308.el5
  Version: #1 SMP kills Jan 27 17:17:51 EAST 2012
  Machine: x86_64
  Using the settings in client pfile /u01/app/oracle/admin/OML5K/pfile/init.ora on machine OM5000
  Parameters of the system with default values:
  process = 150
  nls_language = "ENGLISH."
  nls_territory = 'AUSTRALIA '.
  SGA_TARGET = 4G
  control_files = "/ u01/app/oracle/oradata/OML5K/control01.ctl".
  control_files = "/ u01/app/oracle/fast_recovery_area/OML5K/control02.ctl".
  DB_BLOCK_SIZE = 8192
  compatible = "11.2.0.0.0."
  db_recovery_file_dest = ' / u01/app/oracle/fast_recovery_area.
  db_recovery_file_dest_size = 50000M
  undo_tablespace = 'UNDOTBS1.
  Remote_login_passwordfile = "EXCLUSIVE."
  db_domain = «»
  dispatchers = "(PROTOCOL=TCP) (SERVICE = OML5KXDB)" "
  audit_file_dest = ' / u01/app/oracle/admin/OML5K/adump.
  AUDIT_TRAIL = 'DB '.
  db_name = "OML5K".
  open_cursors = 300
  pga_aggregate_target = 34558M
  diagnostic_dest = ' / u01/app/oracle '.
  Mon Aug 13 13:12:28 2012
  PMON started with pid = 2, OS id = 21976
  Mon Aug 13 13:12:28 2012
  PSP0 started with pid = 3, OS id = 21978
  Mon Aug 13 13:12:29 2012
  VKTM started with pid = 4, OS id = 21980 high priority
  VKTM clocked at (1) precision of milliseconds with DBRM quantum (100) ms
  Mon Aug 13 13:12:29 2012
  GEN0 started with pid = 5, OS id = 21984
  Mon Aug 13 13:12:29 2012
  DIAG started with pid = 6, OS id = 21986
  Mon Aug 13 13:12:29 2012
  DBRM started with pid = 7, OS id = 21988
  Mon Aug 13 13:12:29 2012
  DIA0 started with pid = 8, OS id = 21990
  Mon Aug 13 13:12:29 2012
  MA started with pid = 9, OS id = 21992
  Mon Aug 13 13:12:29 2012
  DBW0 started with pid = 10, OS id = 21994
  Mon Aug 13 13:12:30 2012
  DBW1 started with pid = 11, OS id = 21996
  Mon Aug 13 13:12:30 2012
  DBW2 started with pid = 12, OS id = 21998
  Mon Aug 13 13:12:30 2012
  DBW3 started with pid = 13, OS id = 22000
  Mon Aug 13 13:12:30 2012
  LGWR started with pid = 14, OS id = 22002
  Mon Aug 13 13:12:30 2012
  CKPT started with pid = 15, OS id = 22004
  Mon Aug 13 13:12:30 2012
  SMON started with pid = 16, 22006 = OS id
  Mon Aug 13 13:12:30 2012
  RECCE has started with pid = 17, OS id = 22008
  Mon Aug 13 13:12:30 2012
  MMON started with pid = 18, OS id = 22010
  Mon Aug 13 13:12:30 2012
  MMNL started with pid = 19, OS id = 22012
  commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...
  commissioning or shared server 1...
  Environment ORACLE_BASE = / u01/app/oracle
  Mon Aug 13 13:12:30 2012
  kcbztek_populate_tbskey: key of db in controlfile and datafile 1 is incompatible...
  Complete full restoration of datafile 4 to datafile copy u01/app/oracle/oradata/OML5K/users01.dbf. Elapsed time: 0:00:00
  Checkpoint is 995547
  last deallocation CPN is 3
  Complete full restoration of datafile 3 to datafile copy u01/app/oracle/oradata/OML5K/undotbs01.dbf. Elapsed time: 0:00:00
  Checkpoint is 995547
  last deallocation CPN is 3
  Mon Aug 13 13:13 2012
  Complete full restoration of datafile 2 to datafile copy u01/app/oracle/oradata/OML5K/sysaux01.dbf. Elapsed time: 0:00:30
  Checkpoint is 995547
  last deallocation CPN is 995211
  Complete full restoration of datafile 1 to datafile copy u01/app/oracle/oradata/OML5K/system01.dbf. Elapsed time: 0:00:38
  Checkpoint is 995547
  last deallocation CPN is 993074
  Mon Aug 13 13:13:08 2012
  Create database set controlfile reuse "OML5K."
  MAXINSTANCES 8
  MAXLOGHISTORY 1
  MAXLOGFILES 16
  MAXLOGMEMBERS 3
  MAXDATAFILES 100
  Data file
  ' / u01/app/oracle/oradata/OML5K/system01.dbf',
  ' / u01/app/oracle/oradata/OML5K/sysaux01.dbf',
  ' / u01/app/oracle/oradata/OML5K/undotbs01.dbf',
  ' / u01/app/oracle/oradata/OML5K/users01.dbf'
  LOGFILE GROUP 1 ('/ u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200 K,.
  GROUP 2 ('/ u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200 K,.
  GROUP 3 ('/ u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200 K RESETLOGS
  WARNING: Temporary Tablespace default not specified in the CREATE DATABASE command
  Default temporary tablespace will be necessary for a locally managed database in future release
  Mon Aug 13 13:13:08 2012
  Mount of redo thread 1, with mount id 3547719972
  Completed: Create controlfile reuse set database 'OML5K '.
  MAXINSTANCES 8
  MAXLOGHISTORY 1
  MAXLOGFILES 16
  MAXLOGMEMBERS 3
  MAXDATAFILES 100
  Data file
  ' / u01/app/oracle/oradata/OML5K/system01.dbf',
  ' / u01/app/oracle/oradata/OML5K/sysaux01.dbf',
  ' / u01/app/oracle/oradata/OML5K/undotbs01.dbf',
  ' / u01/app/oracle/oradata/OML5K/users01.dbf'
  LOGFILE GROUP 1 ('/ u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200 K,.
  GROUP 2 ('/ u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200 K,.
  GROUP 3 ('/ u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200 K RESETLOGS
  Closure of proceedings (immediate)
  Closure of proceedings: in addition to logons disabled
  Stop background MMNL process
  MMON background process stop
  The high waters = 1 license
  All dispatchers/dispatchers and shared servers stop
  ALTER DATABASE CLOSE NORMAL
  ORA-1109 marked during: ALTER DATABASE CLOSE NORMAL...
  ALTER DATABASE TO REMOVE
  Stop process to archive
  Archiving is disabled
  Completed: ALTER DATABASE DISMOUNT
  ARCH: Disabled archives due to the stop: 1089
  Stop process to archive
  Archiving is disabled
  ARCH: Disabled archives due to the stop: 1089
  Stop process to archive
  Archiving is disabled
  Mon Aug 13 13:13:11 2012
  Stop background VKTM process
  Mon Aug 13 13:13:13 2012
  Instance shutdown complete
  Mon Aug 13 13:13:13 2012
  Starting ORACLE instance (normal)
  Large information Pages *.
  
  Total shared global area in large Pages = 0 KB (0%)
  
  Large Pages used by this instance: 0 (0 KB)
  Large wide Pages unused system = 0 (0 KB) (alloc incr 16 MB)
  Large Pages configured wide system = 0 (0 KB)
  The Page Size = 2048 KB
  
  RECOMMENDATION:
  Total size of Global region shared is 4098 MB. For optimal performance,
  before next restart of the instance, to increase the number
  unused wholesale Pages by 2049 2048 Pages atleast big Ko (4098 MB)
  scale to get 100% of the Shared System
  Global area allocated by using large pages
  ***********************************************************
  LICENSE_MAX_SESSION = 0
  LICENSE_SESSIONS_WARNING = 0
  SNA system picked latch-free 3
  With the help of LOG_ARCHIVE_DEST_1 parameter value by default as USE_DB_RECOVERY_FILE_DEST
  Autotune undo retention is enabled.
  IMODE = BR
  ILAT = 28
  LICENSE_MAX_USERS = 0
  SYS audit is disabled
  Commissioning:
  Oracle Database 11 g Release 11.2.0.3.0 - 64 bit Production.
  ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/db_1
  Name of the system: Linux
  Name of the node: OM5000
  News Release: 2.6.18 - 308.el5
  Version: #1 SMP kills Jan 27 17:17:51 EAST 2012
  Machine: x86_64
  Using the settings in client pfile /u01/app/oracle/cfgtoollogs/dbca/OML5K/initOML5KTemp.ora on machine OM5000
  Parameters of the system with default values:
  process = 150
  nls_language = "ENGLISH."
  nls_territory = 'AUSTRALIA '.
  SGA_TARGET = 4G
  control_files = "/ u01/app/oracle/oradata/OML5K/control01.ctl".
  control_files = "/ u01/app/oracle/fast_recovery_area/OML5K/control02.ctl".
  DB_BLOCK_SIZE = 8192
  compatible = "11.2.0.0.0."
  db_recovery_file_dest = ' / u01/app/oracle/fast_recovery_area.
  db_recovery_file_dest_size = 50000M
  nonerecovery_through_resetlogs = TRUE
  undo_tablespace = 'UNDOTBS1.
  Remote_login_passwordfile = "EXCLUSIVE."
  db_domain = «»
  dispatchers = "(PROTOCOL=TCP) (SERVICE = OML5KXDB)" "
  audit_file_dest = ' / u01/app/oracle/admin/OML5K/adump.
  AUDIT_TRAIL = 'DB '.
  db_name = "OML5K".
  open_cursors = 300
  pga_aggregate_target = 34558M
  diagnostic_dest = ' / u01/app/oracle '.
  Mon Aug 13 13:13:14 2012
  PMON started with pid = 2, OS id = 22030
  Mon Aug 13 13:13:14 2012
  PSP0 started with pid = 3, OS id = 22032
  Mon Aug 13 13:13:15 2012
  VKTM started with pid = 4, OS id = 22034 high priority
  VKTM clocked at (1) precision of milliseconds with DBRM quantum (100) ms
  Mon Aug 13 13:13:15 2012
  GEN0 started with pid = 5, OS id = 22038
  Mon Aug 13 13:13:15 2012
  DIAG started with pid = 6, OS id = 22040
  Mon Aug 13 13:13:15 2012
  DBRM started with pid = 7, OS id = 22042
  Mon Aug 13 13:13:15 2012
  DIA0 started with pid = 8, OS id = 22044
  Mon Aug 13 13:13:15 2012
  MA started with pid = 9, OS id = 22046
  Mon Aug 13 13:13:15 2012
  DBW0 started with pid = 10, OS id = 22048
  Mon Aug 13 13:13:15 2012
  DBW1 started with pid = 11, OS id = 22050
  Mon Aug 13 13:13:15 2012
  DBW2 started with pid = 12, OS id = 22052
  Mon Aug 13 13:13:15 2012
  DBW3 started with pid = 13, OS id = 22054
  Mon Aug 13 13:13:15 2012
  LGWR started with pid = 14, OS id = 22056
  Mon Aug 13 13:13:15 2012
  CKPT started with pid = 15, OS id = 22058
  Mon Aug 13 13:13:15 2012
  SMON started with pid = 16, OS id = 22060
  Mon Aug 13 13:13:15 2012
  RECCE has started with pid = 17, OS id = 22062
  Mon Aug 13 13:13:15 2012
  MMON started with pid = 18, OS id = 22064
  Mon Aug 13 13:13:15 2012
  MMNL started with pid = 19, OS id = 22066
  commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...
  commissioning or shared server 1...
  Environment ORACLE_BASE = / u01/app/oracle
  Mon Aug 13 13:13:15 2012
  Create database set controlfile reuse "OML5K."
  MAXINSTANCES 8
  MAXLOGHISTORY 1
  MAXLOGFILES 16
  MAXLOGMEMBERS 3
  MAXDATAFILES 100
  Data file
  ' / u01/app/oracle/oradata/OML5K/system01.dbf',
  ' / u01/app/oracle/oradata/OML5K/sysaux01.dbf',
  ' / u01/app/oracle/oradata/OML5K/undotbs01.dbf',
  ' / u01/app/oracle/oradata/OML5K/users01.dbf'
  LOGFILE GROUP 1 ('/ u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200 K,.
  GROUP 2 ('/ u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200 K,.
  GROUP 3 ('/ u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200 K RESETLOGS
  WARNING: Temporary Tablespace default not specified in the CREATE DATABASE command
  Default temporary tablespace will be necessary for a locally managed database in future release
  Mount of redo thread 1, with mount id 3547724076
  Completed: Create controlfile reuse set database 'OML5K '.
  MAXINSTANCES 8
  MAXLOGHISTORY 1
  MAXLOGFILES 16
  MAXLOGMEMBERS 3
  MAXDATAFILES 100
  Data file
  ' / u01/app/oracle/oradata/OML5K/system01.dbf',
  ' / u01/app/oracle/oradata/OML5K/sysaux01.dbf',
  ' / u01/app/oracle/oradata/OML5K/undotbs01.dbf',
  ' / u01/app/oracle/oradata/OML5K/users01.dbf'
  LOGFILE GROUP 1 ('/ u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200 K,.
  GROUP 2 ('/ u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200 K,.
  GROUP 3 ('/ u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200 K RESETLOGS
  Stop background MMNL process
  MMON background process stop
  From MMON background process
  From MMNL background process
  Mon Aug 13 13:13:18 2012
  MMON started with pid = 18, OS id = 22077
  Mon Aug 13 13:13:18 2012
  MMNL started with pid = 19, OS id = 22079
  ALTER SYSTEM active session restricted;
  ALTER database open resetlogs ' OML5K'
  RESETLOGS after incomplete recovery until this THAT the CHANGE 995547
  Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
  ORA-00313: open failed for the members of the group log 1 of thread 1
  ORA-00312: thread 1 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo01.log'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  Compensation online redo logfile 1 /u01/app/oracle/oradata/OML5K/redo01.log
  Deletion log 1 of thread 1 sequence number 0 online
  Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
  ORA-00313: open failed for the members of the group log 1 of thread 1
  ORA-00312: thread 1 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo01.log'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
  ORA-00313: open failed for the members of the group log 1 of thread 1
  ORA-00312: thread 1 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo01.log'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  Mon Aug 13 13:13:18 2012
  Running the Checker found 1 new failures of persistent data
  Online redo logfile 1 full compensation
  Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
  ORA-00313: open failed for the members of the Group of newspapers wire 2 1
  ORA-00312: wire 2 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo02.log'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  Compensation online redo logfile 2 /u01/app/oracle/oradata/OML5K/redo02.log
  Erasing online newspaper wire 2 1 sequence number 0
  Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
  ORA-00313: open failed for the members of the Group of newspapers wire 2 1
  ORA-00312: wire 2 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo02.log'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
  ORA-00313: open failed for the members of the Group of newspapers wire 2 1
  ORA-00312: wire 2 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo02.log'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  Compensation online redo logfile 2 complete
  Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
  ORA-00313: open failed for the members of Group 3, Journal of thread 1
  ORA-00312: wire 3 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo03.log'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  Compensation online redo logfile 3 /u01/app/oracle/oradata/OML5K/redo03.log
  Erasing online Journal 3 of thread 1 sequence number 0
  Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
  ORA-00313: open failed for the members of Group 3, Journal of thread 1
  ORA-00312: wire 3 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo03.log'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  Errors in the /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc file:
  ORA-00313: open failed for the members of Group 3, Journal of thread 1
  ORA-00312: wire 3 1 online journal: ' / u01/app/oracle/oradata/OML5K/redo03.log'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  Compensation online redo logfile 3 complete
  Log in online /u01/app/oracle/oradata/OML5K/redo01.log: thread 1 Group 1 had been previously authorized
  Log in online /u01/app/oracle/oradata/OML5K/redo02.log: thread 1 group 2 was previously disabled
  Log in online /u01/app/oracle/oradata/OML5K/redo03.log: thread 1 Group 3 has been previously authorized
  Definition of embodiment of recovery target 2
  Assigning activation ID 3547724076 (0xd375f92c)
  Thread 1 is open to the log sequence 1
  Currently journal # 1, seq # 1 mem # 0: /u01/app/oracle/oradata/OML5K/redo01.log
  Opening of redo thread 1
  SMON: enabling cache recovery
  [22071] successfully put 2 undo Tablespace online.
  Cancel initialization is complete series: 0 start: 256557774 end: 256557834 diff:60 (0 seconds)
  Dictionary check start
  Tablespace 'TEMP' #3 found in the data dictionary,
  but not in the controlfile. Adding to controlfile.
  Verification of the complete dictionary
  Check the compatibility of the header files for tablespace 11g encryption...
  Compatibility check header files 11g for tablespace encryption completed
  SMON: enabling the recovery of tx
  *********************************************************************
  ATTENTION: The following temporary tablespaces do not contain any file.
  This condition can occur when a backup controlfile
  been restored. It may be necessary to add files to these
  storage spaces. This can be done using the SQL statement:
  
  ALTER TABLESPACE < nom_tablespace > ADD TEMPFILE
  
  Furthermore, if these temporary tablespaces are no longer
  necessary, then they can be recessed.
  Temporary tablespace is empty: TEMP
  *********************************************************************
  Database character set is US7ASCII
  Create the relationship IPS_PACKAGE_UNPACK_HISTORY
  No Resource Manager plan active
  **********************************************************
  WARNING: Files may exist in db_recovery_file_dest
  that are not known to the database. Use the RMAN command
  RECOVERY of CATALOG AREA again all these files from the catalog.
  If the files cannot be catalogued, then remove them manually
  using the OS command.
  Cause one of the following events:
  1. a backup controlfile was restored.
  2. a standby controlfile was restored.
  3. the controlfile was recreated.
  4 db_recovery_file_dest had previously been activated and
  then disabled.
  **********************************************************
  off replication_dependency_tracking (no replication multimaster async found)
  From QMNC background process
  Mon Aug 13 13:13:20 2012
  QMNC started with pid = 24, OS id = 22087
  LOGSTDBY: Validation controlfile with logical metadata
  LOGSTDBY: Validation complete
  World famous OML5K
  Completed: alter resetlogs open database 'OML5K '.
  ALTER database rename global_name to 'OML5K '.
  Completed: alter database rename global_name to 'OML5K '.
  ALTER TABLESPACE TEMP add TEMPFILE ' / u01/app/oracle/oradata/OML5K/temp01.dbf' SIZE 20480 K REUSE AUTOEXTEND ON NEXT 640 K MAXSIZE UNLIMITED
  Completed: ALTER TABLESPACE TEMP add TEMPFILE ' / u01/app/oracle/oradata/OML5K/temp01.dbf' SIZE 20480 K REUSE AUTOEXTEND ON NEXT 640 K MAXSIZE UNLIMITED
  ALTER DEFAULT DATABASE TABLESPACE 'USERS '.
  Completed: ALTER DATABASE default TABLESPACE 'USERS '.
  change the character set of database INTERNAL_CONVERT ZHS16GBK
  From CJQ0 background process
  Mon Aug 13 13:13:22 2012
  CJQ0 started with pid = 23, OS id = 22089
  Mon Aug 13 13:13:23 2012
  50000 MB db_recovery_file_dest_size is 0.00% used. It is a
  user-specified limit on the amount of space that will be used by the present
  for the files related to the recovery of databases and does not reflect the amount of
  space available in the underlying file system or ASM diskgroup.
  Mon Aug 13 13:13:27 2012
  Thread 1 Advanced to save sequence 2 (LGWR switch)
  Currently Journal # 2 seq # 2 mem # 0: /u01/app/oracle/oradata/OML5K/redo02.log
  Mon Aug 13 13:13:30 2012
  Character in controlfile to ZHS16GBK update
  Set the synchronization information in connection with the base characters
  SYS. RULE$ (CONDITION) - modified CLOB representation
  SYS. PLANNER$ _EVENT_LOG (ADDITIONAL_INFO) - modified CLOB representation
  SYS. SNAP$ (REL_QUERY) - modified CLOB representation
  SYS. SNAP$ (ALIAS_TXT) - modified CLOB representation
  SYS. WRI$ _ADV_OBJECTS (ATTR4) - modified CLOB representation
  SYS. WRI$ _ADV_OBJECTS (OTHER) - modified CLOB representation
  SYS. WRI$ _ADV_DIRECTIVE_META (DATA) - modified CLOB representation
  SYS. WRI$ _DBU_FEATURE_METADATA (INST_CHK_LOGIC) - modified CLOB representation
  SYS. WRI$ _DBU_FEATURE_METADATA (USG_DET_LOGIC) - modified CLOB representation
  SYS. WRI$ _DBU_HWM_METADATA (LOGIC) - modified CLOB representation
  SYS. WRI$ _OPTSTAT_HISTHEAD_HISTORY (EXPRESSION) - modified CLOB representation
  Mon Aug 13 13:13:30 2012
  From OCMS background process
  Mon Aug 13 13:13:30 2012
  OCMS started with pid = 27, OS id = 22098
  SYS. WRI$ _REPT_FILES ($SYS_NC00005) - modified CLOB representation
  SYS. AMOUNT $ (SRC_STMT) - modified CLOB representation
  SYS. AMOUNT $ (DEST_STMT) - modified CLOB representation
  SYS. ATTRIBUTE_TRANSFORMATIONS$ (XSL_TRANSFORMATION) - modified CLOB representation
  SYS. METASTYLESHEET (STYLE sheet) - modified CLOB representation
  XDB. XDB RESOURCE $ (SYS_NC00027$)-modified CLOB representation
  XDB. XDB$ XDB_READY (DATA) - modified CLOB representation
  XDB. XDB$ DXPTAB ($SYS_NC00006) - modified CLOB representation
  MDSYS. SDO_XML_SCHEMAS (XMLSCHEMA) - modified CLOB representation
  Thread 1 Advanced to save sequence 3 (switch LGWR)
  Currently Journal # 3 seq # 3 mem # 0: /u01/app/oracle/oradata/OML5K/redo03.log
  Mon Aug 13 13:13:43 2012
  MDSYS. SDO_COORD_OP_PARAM_VALS (PARAM_VALUE_FILE) - modified CLOB representation
  MDSYS. SDO_GEOR_XMLSCHEMA_TABLE (XMLSCHEMA) - modified CLOB representation
  MDSYS. SDO_STYLES_TABLE (DEFINITION) - modified CLOB representation
  SYSMAN. MGMT_IP_ELEM_DEFAULT_PARAMS (VALUE) - modified CLOB representation
  SYSMAN. MGMT_IP_REPORT_ELEM_PARAMS (VALUE) - modified CLOB representation
  SYSMAN. MGMT_IP_SQL_STATEMENTS (SQL_STATEMENT) - modified CLOB representation
  SYSMAN. MGMT_JOB_LARGE_PARAMS (PARAM_VALUE) - modified CLOB representation
  SYSMAN. MGMT_SEC_INFO (B64_LOCAL_CA) - modified CLOB representation
  SYSMAN. MGMT_SEC_INFO (B64_INTERNET_CA) - modified CLOB representation
  APEX_030200.WWV_FLOW_FLASH_CHARTS (CHART_XML) - modified CLOB representation
  APEX_030200.WWV_FLOW_FLASH_CHART_SERIES (SERIES_QUERY) - modified CLOB representation
  APEX_030200.WWV_FLOW_SHORTCUTS (SHORTENED) - modified CLOB representation
  APEX_030200.WWV_FLOW_STEPS (HELP_TEXT) - modified CLOB representation
  APEX_030200.WWV_FLOW_STEPS (HTML_PAGE_HEADER) - modified CLOB representation
  APEX_030200.WWV_FLOW_STEP_PROCESSING (PROCESS_SQL_CLOB) - modified CLOB representation
  APEX_030200.WWV_FLOW_PAGE_GENERIC_ATTR (ATTRIBUTE_VALUE) - modified CLOB representation
  APEX_030200.WWV_FLOW_TEMPLATES (HEADER_TEMPLATE) - modified CLOB representation
  APEX_030200.WWV_FLOW_TEMPLATES (FOOTER_TEMPLATE) - modified CLOB representation
  APEX_030200.WWV_FLOW_TEMPLATES (BOX) - modified CLOB representation
  Mon Aug 13 13:13:54 2012
  Thread 1 cannot allot of new newspapers, sequence 4
  Checkpoint is not complete
  Currently Journal # 3 seq # 3 mem # 0: /u01/app/oracle/oradata/OML5K/redo03.log
  Mon Aug 13 13:13:57 2012
  APEX_030200.WWV_FLOW_PAGE_PLUGS (PLUG_SOURCE) - modified CLOB representation
  Thread 1 Advanced to record the sequence 4 (switch LGWR)
  Currently journal # 1, seq # 4 mem # 0: /u01/app/oracle/oradata/OML5K/redo01.log
  APEX_030200.WWV_FLOW_PAGE_PLUGS (CUSTOM_ITEM_LAYOUT) - modified CLOB representation
  APEX_030200.WWV_FLOW_PAGE_PLUG_TEMPLATES (MODEL) - modified CLOB representation
  APEX_030200.WWV_FLOW_PAGE_PLUG_TEMPLATES (TEMPLATE2) - modified CLOB representation
  APEX_030200.WWV_FLOW_PAGE_PLUG_TEMPLATES (TEMPLATE3) - modified CLOB representation
  APEX_030200.WWV_FLOW_PROCESSING (PROCESS_SQL_CLOB) - modified CLOB representation
  APEX_030200.WWV_FLOW_REGION_REPORT_COLUMN (PK_COL_SOURCE) - modified CLOB representation
  APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE1) - modified CLOB representation
  APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE2) - modified CLOB representation
  APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE3) - modified CLOB representation
  APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE4) - modified CLOB representation
  APEX_030200.WWV_FLOW_BANNER (BANNER) - modified CLOB representation
  APEX_030200.WWV_FLOW_BUTTON_TEMPLATES (MODEL) - modified CLOB representation
  APEX_030200.WWV_FLOW_INSTALL (DEINSTALL_SCRIPT) - modified CLOB representation
  APEX_030200.WWV_FLOW_LIST_TEMPLATES (LIST_TEMPLATE_CURRENT) - modified CLOB representation
  APEX_030200.WWV_FLOW_LIST_TEMPLATES (LIST_TEMPLATE_NONCURRENT) - modified CLOB representation
  APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_LIST_ITEM_CURRENT) - modified CLOB representation
  APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_LIST_ITEM_NONCURRENT) - modified CLOB representation
  APEX_030200.WWV_FLOW_LIST_TEMPLATES (ITEM_TEMPLATE_CURR_W_CHILD) - modified CLOB representation
  APEX_030200.WWV_FLOW_LIST_TEMPLATES (ITEM_TEMPLATE_NONCURR_W_CHILD) - modified CLOB representation
  APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_TEMPLATE_CURR_W_CHILD) - modified CLOB representation
  APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_TEMPLATE_NONCURR_W_CHILD) - modified CLOB representation
  APEX_030200.WWV_FLOW_WORKSHEETS (SQL_QUERY) - modified CLOB representation
  Mon Aug 13 13:14:08 2012
  APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (PAGE_SENTRY_FUNCTION) - modified CLOB representation
  APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (SESS_VERIFY_FUNCTION) - modified CLOB representation
  APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (PRE_AUTH_PROCESS) - modified CLOB representation
  APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (AUTH_FUNCTION) - modified CLOB representation
  APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (POST_AUTH_PROCESS) - modified CLOB representation
  Information about the game refreshing attributes of type new character
  Completed: alter database INTERNAL_CONVERT ZHS16GBK character set
  Mon Aug 13 13:14:11 2012
  ALTER SYSTEM disable session restricted;
  Mon Aug 13 13:14:12 2012
  Thread 1 Advanced to record the sequence 5 (switch LGWR)
  Currently Journal # 2 seq # 5 mem # 0: /u01/app/oracle/oradata/OML5K/redo02.log
  Mon Aug 13 13:14:28 2012
  Closure of proceedings (immediate)
  OCMS background process stop
  Closure of proceedings: in addition to logons disabled
  Stop background QMNC process
  Mon Aug 13 13:14:29 2012
  Stop background CJQ0 process
  Stop background MMNL process
  MMON background process stop
  License of the high waters = 14
  Stop slave queue treatments, flags = 7
  Treatment of slave leader arrested projects
  All dispatchers/dispatchers and shared servers stop
  ALTER DATABASE CLOSE NORMAL
  Mon Aug 13 13:14:33 2012
  SMON: disabling recovery tx
  SMON: disabling of cache recovery
  Mon Aug 13 13:14:33 2012
  Stop process to archive
  Archiving is disabled
  Stopping the process Archive avoided: active 0
  Thread 1 is thrown to the sequence of journal 5
  Closing of redo thread 1
  Completed: ALTER DATABASE CLOSE NORMAL
  ALTER DATABASE TO REMOVE
  Stop process to archive
  Archiving is disabled
  Completed: ALTER DATABASE DISMOUNT
  ARCH: Disabled archives due to the stop: 1089
  Stop process to archive
  Archiving is disabled
  ARCH: Disabled archives due to the stop: 1089
  Stop process to archive
  Archiving is disabled
  Mon Aug 13 13:14:34 2012
  Stop background VKTM process
  State of the system dumped to trace file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22163.trc
  Mon Aug 13 13:14:36 2012
  Instance shutdown complete
  Mon Aug 13 13:14:37 2012
  Starting ORACLE instance (normal)

  We are in 2013, all the logs of your alerts indicate former far

• Restart of the cluster

  I have a cluster created in Virtual Center, 2.5 update 4.  The ESX hosts are running any version 3.5.

  I would like to know if I should be disable HA before restarting the cluster hosts.

  Your comments would be appreciated

  Thank you.  Makes sense.  What happens if I wanted to restart all hosts in the cluester.  Would it not easier to disable HA before doing so?

  Yes.

  Please consider awarding points to 'correct' or 'useful' responses.

• Root user cannot create VMS within the Resource Pool after you rename the Cluster

  Currently, vCenter manages two clusters. I renamed a single cluster and the root user seems now are not allowed to create a new Virtual Machine in resource pools to the title of the group with the changed name. I tried to change the name of the cluster to its original name... no luck.

  The root user can still create a VM under the individual cluster nodes, but not in a resource pool.

  The cluster that has not been renamed yet can be managed completely with the root user. Resource pools it allow me to create a virtual machine.

  I found this last issue and checked on each cluster node that the ACEDataRoleId is-1 for each section: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1031192

  I am at a loss, any help would be greatly appreciated! Thank you!

  I think it's a bug. When I created a new data center and migrate all nodes in cluster about him, the permissions problem I was experiencing did not follow.

  Thank you for your help.

• 64-bit Windows vista hangs after you run the update

  Hello

  Last night I ran the update of windows on my 64 bit vista laptop, he said there are 2 updates important (I don't remember what they were) and 1 optional (for security essentials).  I chose to install them all, let run updates, restarted the computer when he was asked and then pinned the problem.  Windows starts up nicely, all my startup apps pop up like normal (things like security basics, steam, etc.) and, if I don't touch it, it looks fine.  Sometimes I can get as opening firefox, sometimes just moving my mouse t - it, but the computer just hangs.  I can still move my mouse (sometimes it turns in a circle, as the computer working on something) but I can't click on anything whatsoever, cannot Ctrl + alt + delete... my only way of l ' down made a difficult start.

  I tried to use the tool of the previous version to roll back to before the update, the Wizard works well and said completing, but I still have the same question.  If I'm in safe mode or safe mode with networking, it works fine. I even tried to delete pending.xml to see if it was an update stuck but who did not (cmd said that there was no pending.xml found to remove)

  Anyone know what this might be or how to fix it?  I'm fresh out of ideas

  Hello
   
  Given that everything works well in safe mode which makes them a third-party application causes the computer to freeze.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  Here are the steps to do:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  8. in addition, you will need to uninstall and reinstall the software problem on your computer.
  Reset the computer to start as usual
  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.
   
  For more information, refer to the article below.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer hangs after you type the bitlocker password

  Sir I use bitlocker in my computor now my drive is locked when I open the drive and after entering the password my PC hang and does not work then I restart my system again now, Sir tell me the soloution of this problem my window is window 7

  OT: bitoloker

  Hello

  I suggest you try to type the password. If you are unable to access the drive, I suggest you try the steps in the response post by abhishek.

• Black screen after restart of the Bootcamp Assistant

  Hello

  I understand that 10 Windows is not supported with the MBP Late 2011 officially by Apple, I have it working earlier today and had no problems at all. I tried to add another partition for windows side so that I would be able to install Deep Freeze on Windows have a clean install of Windows every time that I boot in there and have all my programs and files on what would have been called "Local D.

  I deleted the Windows partition and I deleted the first player who had only 200 MB normally created from windows which I believe that holds the MBR for the old Windows Installer install. I tried to create 2 different partitions in disk utility and that the load bootcamp. He said well obviously not, because the reader must be around to do this, I did the road together again, put my Windows 10 disc in and let bootcamp.

  I wanted the reader to have 51 GB of bootcamp, that I would use 300 GB for the 'Local D' drive and the rest of the SSD 1 TB drive, I got OS X El Capitan. If at this point, I have X amount of GB to OS X and 51 GB will be used so that the wizard has done for me, once the wizard bootcamp is made, it will restart OS X and brings me to a gray screen. Normally, it's just going to continue in the installation of Windows, but it takes me to a black screen and does nothing else. Is this by far where can I fix? I even tried simply to launch the installation of Windows Installer directly from the drive itself without going through installation of bootcamp by holding ALT and selecting the drive and he finally took to the installation without any problem and now it goes to a black screen and does not change even.

  And for those wondering, no I do not get a flashing cursor in the upper left corner of my screen. Its completely black.

  PerfectStory wrote:

  I deleted the Windows partition and I deleted the first player who had only 200 MB normally created from windows which I believe that holds the MBR for the old Windows Installer install.

  You have deleted the EFI Partition from Mac. Not a very good idea. She does not hold the MBR. Your Mac uses a hybrid MBR. The MBR and the boot for Windows Manager are two separate entities.

  I tried to create 2 different partitions in disk utility and that the load bootcamp. He said well obviously not, because the reader must be around to do this, I did the road together again, put my Windows 10 disc in and let bootcamp.

  Disk utility is now considered an invalid drive due to a missing EFI partition. How did you again the reader "XV"? If you start from W10 in the optical drive, it is no Bootcamp involved more.

  I wanted the reader to have 51 GB of bootcamp, that I would use 300 GB for the 'Local D' drive and the rest of the SSD 1 TB drive, I got OS X El Capitan. If at this point, I have X amount of GB to OS X and 51 GB will be used so that the wizard has done for me, once the wizard bootcamp is made, it will restart OS X and brings me to a gray screen. Normally, it's just going to continue in the installation of Windows, but it takes me to a black screen and does nothing else. Is this by far where can I fix? I even tried simply to launch the installation of Windows Installer directly from the drive itself without going through installation of bootcamp by holding ALT and selecting the drive and he finally took to the installation without any problem and now it goes to a black screen and does not change even.

  And for those wondering, no I do not get a flashing cursor in the upper left corner of my screen. Its completely black.

  Please after the release of the following Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Birth of Nations hangs after update to the last version of windows

  the ndvidia update was unsuccessful and now Rise of Nations hangs and the computer restarts.

  Hi BillElliott,
   
  -Do you remember the number of the Knowledge Base (KB) of the update has been installed recently?
  -What happens when you try to update the graphics card? You receive an error message or error code? If Yes, indicate the same.
   
  Follow these steps to display the history of facility for the number of the update has been installed recently.
   
  a. click Start, click all programsand then click Windows Update or Microsoft Update.
  b. on the Windows Update Web site or on the Microsoft Update Web site, click view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.
   
  Keep me updated on the status of the issue.

• Losing files, programs and settings after restart of the system or of the judgment

  Whenever I restart or star - with respect to a previous stop, restarting my laptop with programs and missing files. The only way to solve this problem is to restore the system several times until I have the chance. Why is this happening?

  Hello

  It seems that the profile does not work correctly then try these methods to solve the problem.

  1 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ----------------------------------------------------------------------------

  2. you can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• After restart of the cc does not start

  Hello

  on iMac27 with OS X Yosemite. After each restart creative cloud does not start. I must force "reboot several times for throwing.

  Any suggestions?

  Thank you

  Enrico

  Hi Enrico,.

  Please try the below steps mentioned and see if it works.

  1. open Activity Monitor

  2 search for Adobe related process (Creative cloud, coresync, AAMnotifire/updater)

  3 - put an end to all Services from Adobe

  4 restart the computer, try to run.

  Cleaning tool allows you to delete the corrupted files creative cloud and reinstall it.

  • Removal tool: https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
  • Installer: creative cloud help | Download, install, update or uninstall applications

  If you still find the same behavior, please try to create a new admin account and try to run to this user account.

  Thank you

  Atul Saini

• why I get a 502 Bad Gateway in SOME sites only after restarting, reset the browser, update flash player etc and always get "bad gateway"?

  2 sites in particular when I go to old-time TV stream, my movie site is ok, youtube is ok, all plugins are up-to-date, I reset firefox, restarted and all it all that regular but still these 2 sites will not broadcast my video

  now it's all links on the sites given, I tried everything, maybe that it's related to gave 2 sites, one being 'watchseries.ch' I don't know, all the input is appreciated. At this point, I can just wait a day or two before you try something else and see if it is these particular sites.

• Black screen after restart, and the machine to sign

  Send a message to PC-cillan virus my conputer he loses her, so I rebooted it. When he returned to the top of the screen Dell came and then I got floppy diskette seek failure. Strike F1 to continue. I do and it takes a black screen, and the computer is still on Windows does not come to the top or even try. Ive tried F12 and I cannot get into safe mode that brings back me to black screen. It gives me the same symptoms as the BSOD but no cursor.

  Hi jhintense,

  As the virus is running on the computer, we recommend that you first of all allows you to remove the virus from your computer. To do this, you might consider contacting the provider of security software.

  Try these steps and check if your computer starts on the desktop.
  Step 1: Try the last known good configuration
  a. start your computer and press the F8 key continuously to see the menu advanced startup options.
  b. in the menu, select last known good configuration, and press to enter.
  c. see if the system will load very well.

  Step 2: Disable the Floppy drive in the BIOS (Basic input/output system)
  a. start your computer and press DELETE continuously on the screen of the BIOS see.
  b. turn off the power or turn off the disk and save the settings.
  c. restart the computer and check if Windows loads very well.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Surface Pro hangs after restart when MAC address has been spoofed. Why?

  After the usurpation of the MAC address of my 2 - day old Surface Pro, I press the power button. According to my power options, the computer goes to sleep. After awakening, the network adapter is disabled and 5 minutes later, I get a BSOD. The message is a bugcheck 0x9f DRIVER_POWER_STATE_FAILURE. Guilty drivers belong to the Marvell AVASTAR ngn350 card. Drivers have been updated to the latest 14.69.24019.88 but that did not help.

  If I remove the theft (by removing the contents of the registry key"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0012\NetworkAddress") the BSOD go away. They come back at the first sleep after spoofing. So, spoofing is clearly the problem.

  Am I missing any step for a successful spoof in Windows 8 (beyond just the registry hack)? Is there any other way to spoof?

  Thanks in advance for any help you can provide.

  hc++


  Hello

  Welcome to the Microsoft Community Forums.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w8itpro

  Hope this information helps.