Black screen after restart of the Bootcamp Assistant

Similar Questions

• Black screen after restart, and the machine to sign

  Send a message to PC-cillan virus my conputer he loses her, so I rebooted it. When he returned to the top of the screen Dell came and then I got floppy diskette seek failure. Strike F1 to continue. I do and it takes a black screen, and the computer is still on Windows does not come to the top or even try. Ive tried F12 and I cannot get into safe mode that brings back me to black screen. It gives me the same symptoms as the BSOD but no cursor.

  Hi jhintense,

  As the virus is running on the computer, we recommend that you first of all allows you to remove the virus from your computer. To do this, you might consider contacting the provider of security software.

  Try these steps and check if your computer starts on the desktop.
  Step 1: Try the last known good configuration
  a. start your computer and press the F8 key continuously to see the menu advanced startup options.
  b. in the menu, select last known good configuration, and press to enter.
  c. see if the system will load very well.

  Step 2: Disable the Floppy drive in the BIOS (Basic input/output system)
  a. start your computer and press DELETE continuously on the screen of the BIOS see.
  b. turn off the power or turn off the disk and save the settings.
  c. restart the computer and check if Windows loads very well.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 2012 standard r2 in vsphere 5.1 shows the black screen after restart. But the video works in safeboot

  Hi I restarted recently a r2 2012 in esxi 5.1 windows machine managed by vcenter. After restarting the machine is black display screen. In safe mode without problem with video.   I tried the troubleshooting as advised in https://support.microsoft.com/en-us/kb/2897632 method. but only the first update (Windows8.1 - KB2887595-v2-x 64.msu) is able to install in safe mode.

  Someone can help me. ?

  Thanks in advance

  Hello Arjun,

  Thanks for posting your query in Microsoft Community Forum.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information is useful.

• Windows Update: 1 or several updates made a black screen after restart

  So I have this problem for like 3-4 months ago... You all a long history, he gets to that: an update of specefic is originally that when I restart, the computer still works, but the screen is all black. Not even a light down there!
  Someone knows this problem?
  The update that I am sure that all this is cause:
  KB929729 (a security update for Microsoft .NET Framework, version 1.1 SP 1) - I think this is the one, but could be one of these schools:
  KB957000 KB952714, KB929735 - all these are just regular updates for vista x 64-vista systems

  I have the laptop to fix where I bought it. They said that the problem has been resolved, but it didn't. Well, the computer worked as if after I came, but after a Windows Installer update, the system crashed again with black screen.
  Fortunately, I was able to use an ERD to do a system restore to before installing the update.

  MY LAPTOP SPEC. :
  Windows Vista, home Edt. (SP1 has not been installed now, but had SP1 when the 1st problem started)
  Processor Intel Core Duo CPU 2.4 GHz
  4 GB of Ram
  NVIDIA Geforce 9650 GT

  OK, I'm pretty sure it's KB929729 (a security update for Microsoft .NET Framework, version 1.1 SP 1)
  She is marked as an important update, hope that I can live without it?

• Black screen after logging into the domain account

  OK, it's making me nutty and I don't know what to do.

  Configuration: SB Server 2008 running domain controller.  4 client machines connected, 2 XP, 2 running Vista Ultimate SP1.  XP machines work fine (of course).  Vista machines are in the tank.
  Two Vista machines are about 2 weeks with the only changes to the installation of the factory Office, Norton 360 and printer drivers.  Both machines exhibit the same symptoms at the same time:
  (1) after the restart, each machine running Vista for 10 minutes exactly, saying "Please wait...". "before the screen"press Control-Alt-Delete.  Safe Mode boot normally.  Examine the event log, I see entries on running a startup script of some kind that took 600 seconds (10 minutes).  This of course comes from the domain controller.  What is this and how do I get rid of him?
  (2) after finally journaling, tries to connect the domain account ("domain\username") result in a "Welcome" screen... ', followed by a black screen with a mouse cursor which is mobile.  It is a permanent condition.  I let the machine sit overnight and nothing changes.  I get an occasional popup on the black screen of Norton saying it runs background tasks and that's all, so I know the machines are running.  Pressing Ctrl-alt-delete is * not * bring up the Security screen.  It doesn't do anything.
  Note that connect to a * local * account ("machinename\name") works very well.  I have a desktop, icons, everything.  I even connected locally and made a "change user" to a domain account, and now the machine is stuck again to a black screen with mobile mouse.
  Both machines have worked very well for two weeks.  When I reboot safe mode and remove the computer domain, everything works well, probably because I'm just connect to a local account again.
  I did * no. * change to group policy.  The server works with all settings by default wrt updates, etc.  I did not have any mods system to customers other than to join them to the domain.
  I searched online, and I see other people have this problem, but I can't find a definitive solution.  I tried to restart by using the last known good configuration, but I think that the system is of the opinion that the last logon was successful, which is not good.  To return to the last restore Point is not good.  Both machines has stagnated at the same time, which implies a problem across the field.
  Please don't tell me that I have to spend $200 and one day online with technical support to get an answer to this.
  Thanks in advance for any help you can provide.
  -Rob
  2)

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Thank you for visiting the website of Microsoft Windows Vista Community.  The question you have posted is related to Small Business Server and would be better suited to the Small Business Server community.  Please visit the link below to find a community that will provide the support you want.

  SBS 2008

  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Black screen after restarting mode "hibernate", green power button is turned on.

  Anyone had a problem in the past to have a black screen?

  Have had a Sony Vaio VPCF11JFX/B for 2 years now and noticed this problem 3 days ago.

  Whenever the laptop might restart out of hibernation it would show me only a black screen and light green power.

  Had unplugged it and took out the battery with now the off button for up to 1 minute, but it's still doing the same thing.

  Don't know how to troubleshoot it.

  Many would like to advice helful.

  Hi Ameli,

  First of all, download and install the utility to update the BIOS from here: http://esupport.sony.com/US/p/swu-download.pl?mdl=VPCF11JFXB&upd_id=5818&os_group_id=6

  Then, download and install the updated video driver here: http://esupport.sony.com/US/p/swu-download.pl?mdl=VPCF11JFXB&upd_id=5577&os_group_id=6

  Then, perform a restore of the system to an earlier time when it worked very well: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1003813

  Then, perform a full system recovery to restore your computer to factory settings. Restart the computer, keep pressing the F10 key continuously, press on enter key at the start of editing option, Recovery Wizard, select start and click on ignore VAIO Care rescue (if you do not want to back up data) to start the system recovery process.

  Note: You can perform system recovery if you are using the same operating system installed at the factory. It is necessary to backup all data before performing the system recovery as it erases everything from the computer.

  If the problem persists, contact Sony Service support here: http://esupport.sony.com/US/p/service.pl

  Note: If my post answered your question, please mark it as an "accepted Solution".

• Windows 8 black screen after Login or the wake from sleep / hibernate and flickering screen

  Hello

  I have something of a nightmare with my desktop computer running Windows 8 x 64.

  I did a bit of cleaning, unplug all cables, etc. and then reconnected everything later.

  Since then, I've known the following questions: -.

  After starting and going through the connection, I am faced with a black screen.  The monitor turns on, but there is no pointer.  However, if I clicked at random, it would open a Windows App out of the splash screen, which would then become visible.  If I moved the mouse to the bottom left, to get the splash screen, he would immediately go black screen on me.  He seemed to be refusing to display the splash screen.

  With "display" black screen, I found I could get the Task Manager (Ctrl, Alt, Del) upward and there could access the desktop.  It would then execute as usual, but if I let it go into hibernation or even just having the power of the screen down, it would be black screen again, and I have to use the 'trick' Task Manager to retrieve the desktop computer.

  Sometimes, using the Manager tasks does not always, because he'll sweep between the black screen and the desktop, alternating every 5-6 seconds.  I found through the process from the Task Manager, it stops doing this.

  Now, I did a Windows 8 regenerate, without any change in the problems.  I made sure the AMD drivers have been completely updated (they were) and also physically checked all cables and cables are properly connected and the GPU / RAM etc are properly placed.

  There is no error message displayed at any time. I have also disabled Fast Boot, nothing helps.

  I examined a faulty monitor, but it worked fine for an hour or two at a time, until I got let go sleep or put into hibernation, and I'm at square one.  It would of course be a faulty GPU, or even a PSU failure, but I'm not convinced the symptoms are pointing to them.

  For me, the fact it does not display the Windows 8 start screen after that Login or Wake Up is important.  It makes me think that Windows may interfere with the display in some way?

  I can, if necessary, provide DXDIAG etc, and I "m hoping someone will have an idea of what goes wrong.  I have spent ages going through Google and others, but cannot find a solution to my problem.

  Thanks for any help or suggestion you may have.

  Conrad.

  It solved!  Traded my monitor cable and all problems solved.  Guess he had a break or something in one of the lines.

  Thanks anyway.

• Black screen after installation of the Agent from the view.

  Hello

  I am facing a weird problem on my windows 8.1.

  I have install for use as a template for a pool automated view 5.1

  When I install the vmtools, after that I installed the agent of sight, I got a black screen.

  I tried several times and I got the same thing.

  I'm not able to convert into a model of deployment of workstations after.

  Can you please help me on this problem.

  Thank you in advance.

  I'm a little unclear - which command do you have installed? If you have installed VMware Tools after the Agent of the view, you need to uninstall and re-install the Agent of the view... It must ALWAYS be installed last, even if you're just updating tools.

  In addition, Windows 8.1 is not supported with view 5.1 IIRC

• iPad black screen after turning on the voiceover

  I turned voiceover on and then when I locked my ipad. I tried pressing the locking button and button "home" together and that has not fixed my problems, the apple logo appears when booting up, then briefly the lock screen. Any ideas as to what I should try?

  A black screen with Voice over on East to reduce the screen. Triple, tap the screen with three fingers to remove the screen.

  Or

  Siri say politely, 'Vouceover Turn off.'

• HP 15-f039wm Notebook PC: black screen after login in the 8.1 window

  Once connected, the screen goes black, with only the visible mouse. I can run programs through task manager and the computer works normally until after I connect. I would like to know if this can be corrected as soon as possible because I need a computer for school.

  Hello:
  
  Follow this web document of HP to the useful address:
  http://support.HP.com/us-en/document/c04572861
  
  Or suggestion of David here:
  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-X2-PC-goes-black-after-logging-in/m-p/4897895#M67690
  
  Concerning
  
  Visruth

• HP xw8400: HP xw8400: black screen after you add the Bios password

  
  

  Remove the password bios reset jumper on the motherboard and reset the bios/cmos solved the problem.

  Hope this helps someone else.

• Pavilion 15 - p065tx: Pavilion 15 - p065tx, black screen after BIOS update recommended by HP assistant

  System reboot with black screen after accepting the update of the BIOS recommended by HP assistant this morning. AC power on at least three hours of waiting after the process completed successfully with auto update reboots always.

  Power light is on. Wired broadband light is turned on. Light CAP LOCK keyboard and led speaker hold noway.

  Hard reset has been tried 3 times with no improvement.

  External monitor is connected but no signal has been out of the laptop, screen is black.

  Done a few times this page to reset the BIOS setting blindly:

  http://support.HP.com/us-en/document/c02217843

  BEEPS heard when you press F10 or F5 during procedures. But still black screen.

  What can I try again?  Please advice kindly!

  Hi @ sokw,

  I have read and reviewed the post. Thanks for your reply. It seems that bios is damaged, and that is why the computer does not start. As it cannot be fixed by any software troubleshooting, you will need to contact the HP support by phone for the machine.

  HP technical support are available by clicking on the following link:
  
  http://h22207.www2.HP.com/us-en/?openCLC=true
  
  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
  
  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
  
  (3) Once finished, click the "Show Options" at the bottom right.
  
  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Believe me, I've done everything I can to help by keeping your interests in mind. Please reach out for questions and I'll be there for you help.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• At the end of the factory restore, but black screen after "Windows has set up the computer.

  The model in question is VC863AA #UUW

  I want to get back the computer to the factory condition, so I rebooted and you press F11. Everything went exactly like this: http://support.hp.com/us-en/document/c00814731#N72 (chapter "Start a restore from the hard drive and the computer is off")...

  .. until step 10, which States:

  "The computer restarts and continues in the installation of Windows. Complete the configuration screens and wait until the computer finishes the installation program. "Then turn off the computer, reconnect all devices and turn on the computer.

  Yes, the computer restarts. She continues in the Windows installation (it says "medan windows konfigurerar datorn Vanta", which means roughly "Please wait while Windows configures the computer"). After that which was for about 5-10 minutes, the text disappears and the computer restarts by itself.

  After that, he gives a normal load Windows Vista bar and after that black screen. It seems to be a little bit alive but jammed somehow. If I let it be for several hours, he goes to the standby mode. If I wake up, he still won't. I can plug a USB another keyboard and he will make some access to hard drive (load a driver probably). I can press the sleep button and it will go into sleep mode. But if I press the power button / stop briefly, it will NOT stop.

  So finally, after several hours I forced to shut down (by pressing the power button / stop longer). When I start it, it goes back to behave as explained in the previous paragraph.

  If I press F8 during startup and select Safe mode, it goes in safe mode and I get dialogue indicating in Finnish:

  «Asenna Windows: Windows ei voi suorittaa vikasietotilassa asennusta.» See devam fenetresdans asennusta uudelleen tietokoneen kaynnistamalla. »

  Rough translation:

  "Installation of Windows: Windows cannot complete installation in safe mode." "You can continue the installation by restarting the computer.

  If I restart the computer, it goes back to the black screen after the windows loading bar.

  This suggests that there is something in the installation of Windows who jams it.

  I can install Windows Vista from a Vista DVD, but then I can't use the software included with the computer. (App States installation cannot install on a machine that is unauthorized, then of course they are looking for some OEM HP things.)

  Any suggestions on how to fix jam that continues with installing Recovery Windows or how to install the software on a normal Vista would be very appreciated.

  I solved the problem. Good thing I didn't order the restore disks, because that would not have solved the problem.

  I decided to post it because I don't know there will be others who have HP Pavilion Elite m9754sc and will have to face this problem of a black screen after the restoration.

  The fact is that the restore worked perfectly, but in this display card driver is buggy and it causes the screen to go black.

  I thought that what I installed fresh Vista which worked until I installed the driver from the recovery partition display. I tried VGA, outputs HDMI and DVI on the factory installed GeForce GT220 and none worked.

  A defective display driver should normally be no problem we could go in safe mode and fix it to the it. But as with the recovery goes to pre install state (ask what language to use etc.), safe mode does not work.

  So the solution is to unlock the display of the motherboard connectors and remove the factory installed GeForce GT220. Once the recovery and installation of Windows is finished using the graphics card integrated motherboards, you can reconnect the GeForce GT220 and get a updated driver with safe mode.

• Satellite M70 - black screen after the installation of recovery

  So far, what I did is put in the Recovery DVD - ROM product. Then when my computer restarts I was invited to restore my computer failing and said. After that he went through this process, that he told me to remove the disc that I did. Now he only get a black screen after the Toshiba screen that gives me options f2 for Setup and f12 for options.

  I don't know what to do now to make my laptop works again. Help, please.

  Hi Zach_1,

  Have you tried to launch the installation of recovery again? Maybe that something was wrong during the first installation, it might have arrived
  Then retry the recovery facility and see what happens.

  If it doesn't work you should try a normal Microsoft disk so determine if the problem is related to hardware or recovery disk.

• Vista - Error Code: 0XC000000D (black screen after the installation of update)

  Original title: blocked Vista patch

  Patch Vista landed on black screen

  message on the screen

  "0xc000000d" registry/40015/55341 (thing)

  It's the August updates, sorry I have no idea who would be KB. This is on a Dell Latitude D630 laptop. Auto repair did not work and States that there is in a slump.

  Any help in this would be very appreciated

  Hi RickL123,

  What is you receive the exact error message?

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: start the computer in last good known Configuration (and also in safe mode). To do this, follow the steps below:

  Access Advanced Startup menu options by turning on your computer and pressing the button F8 continuously until Windows starts. In the boot advanced options, select last good known Configuration-Safe Mode

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 3: You can follow the steps mentioned in the article below, which deals with a similar question

   

  Your computer may freeze or it may restart to a black screen that has an 0xc0000034 error message after you install a service pack for Windows Vista

  http://support.Microsoft.com/kb/975484

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.