XP desktop icons missing after the removal of virus

Similar Questions

• Start bar and the desktop icons missing after the update to vista windows pack 1 and package 2

  I can't what anyone, all my music and photos and all my programs have disappeared from my start bar is missing and all office stuff I had after a windows update has been installed there are vista pack 1 and 2

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• The menu icons and desktop start missing after the start of the desktop computer

  Original title: I do not see my bar of tasks or deskop

  When I start windows xp, I don't see the start menu or the desktop icons, only the desktop wallpaper. I was able to access the internet Explorer via windows Task Manager...

  Help me please! :))

  Hi Daannii,

  1. don't you make changes before the show?

  Try the following steps to start a process of the Windows Explorer and check the result.
  a. start your computer and boot to the desktop.
  b. press CTRL + ALT + DELETE, and then click Manager tasks.
  c. click on the file menu, click New task (run...).
  d. type % windir%\explorer.exe, and then click ok.
  e. restart the computer and check if the problem persists.

  For additional troubleshooting steps, see the following article: http://support.microsoft.com/kb/318027

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the removal of viruses, I have no internet access. Only "absorbing IP" or "renewal IP", nothing els.

  I have windows XP, I had to remove a virus from the Dell XPS. After that, I can't connect to the internet. Either with a wireless connection to the router or a straight cable to the router. All I have is that I can't renew or obtain an IP address. I ran WinsockXP, LSPfix, nothing. I fixed my HOSTS file.

  Nothing.

  Help!

  This is not unusual.  Your best bet, in my opiniojn, is to backup all your data, and then reinstall Windows properly.

• Cannot depend on Windows Firewall after the removal of virus.

  I've removed a virus, but cannot enable Windows Firewall.  The error is "due to a problem not identified, Windows cannot display Windows Firewall settings"

  @Tricky300 good advice

  @krw006

  Each of the variations of the sirefef are extremely wicked him force more often you to reinstall Windows. The reason is that changes made to the file system is usually bad. I'll be happy to try to help you to see if we can get the system to its original state by removing the malware. Unfortunately, the problem is that the file system become corrupt you remove malware. This can often leave you with a computer that won't start plu.

  I would like first of all for you to get all your personal data off your computer. You have an external hard drive, cd/dvd disc or a disc thumb/flash that you can put your personal data for backup? In the affirmative, please download the data.

  Finally, I would like to know how you want to move forward. As stated, I can help to see if we can remove malware or I can help you format the drive and reinstall Windows. Of course, this assumes you have a Windows disc or another recovery option.

• Problem with Windows Update after the removal of Virus

  My operating system is Win Vista 32 bit, had some virus closed my windows updates, have a view of the white page. Checked that my services and win update is in automatic mode has started, so I don't know why my updater gives me a red x saying windows updater is turned off.  Any suggestions?

  [Original title: Windows Update]

  https://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/problem-with-Windows-Update-after-removing-virus/3a8dd279-2732-4693-88bf-f5cea4afca96>

  It makes more sense. How to reset the Windows Update components?

  Yet, as indicated in The ball , the search results links do not work. I also used several browsers and DuckDuckGo. Maybe it's because the Windows Update Agent was changed some time ago and the article is no longer valid.

  EDIT: If the OP is also struggling to access the link I suggest using repair Windows updates available from tweaking.com. I suggest also using the Registry backup of the same author before hand.

  Repair the Windows updates

  http://www.tweaking.com/content/page/repair_windows_updates.html

  Registry backup
  http://www.tweaking.com/content/page/registry_backup.html

  I hope this helps.

• After the removal of virus, lost images and music

  because the virus has been removed I lost all my photos that I had on this subject and I lost all my music that I downloaded and when I try an email somewhere it shows error messages something on a port.

  Hi ernestpilkey,
   
  -What is the exact error message that you receive?
   
  It might be possible that those files had been corrupted by virus.
   
  To restore the system to an earlier point until this problem occurred.
  For more information, see:
  How to restore Windows XP to a previous state

• lost product key and can not access computer - after the removal of virus; Then restart laptop that has requested that the product key

  I removed the virus using malbytes and AVG. I was invited to restart the laptop in order to remove the virus.  When restarting a laptop that asked that the product key, the problem is that I have lost. Can anyone suggest anything?

  I removed the virus using malbytes and AVG. I was invited to restart the laptop in order to remove the virus.  When restarting a laptop that asked that the product key, the problem is that I have lost. Can anyone suggest anything?

  Probably what you see is a fake windows alert activation. Please read the article on the link below to see if it applies to you.

  http://www.bleepingcomputer.com/virus-removal/remove-fake-Windows-activation

• Cannot open programs after the removal of virus to the AVG Virus Vault and rebooted.

  Hi, I have AVG 2011 Free Edition and when I had a virus, AVG it is removed from the quarantine. He then told me to restart the computer to finish. So I restarted and I noticed that the programs which usually start up when I turn on the computer start (like AIM and others). In addition, when I try to open a program for example Firefox, it tells me to choose a program to open the file. It's really annoying and it won't let me choose a default program to open a specific file. Thank you all for the help!

  You have system restore before you have been affected by the virus?

  http://bertk.MVPs.org/index.html

• Windows Firewall service does not start after the removal of Virus

  Hello

  I believe that my son's computer has been infected with the Trojan.Agent.Ed virus.  I managed to remove it (from different folders in AppData), but a few vestiges remain of course.  The windows firewall service does not start - it throws an exception to access denied on startup and when I try to start the service manually.
  I tried to run the Sysinternals Process Monitor to display all events ACCESS DENIED and checked the permissions on the key to registry MpsSvc in HKLM\System\CurrentControlSet\services and compared to a corresponding Windows 7 machine.  I've even exported the key MpsSvc and sous-branches of the laptop in good health and tried to import into a failure, but the import does not seem to occur, even if it gives a message "imported".
  I also tried the troubleshooting of Windows Firewall that confusedly says:
  "Windows could not start the Windows Firewall... Not fixed
  "Set permissions for the registry keys involved"... succeeded
  "Windows Firewall service is not started. Not fixed
  "Starting the Firewall Service"... succeeded
  Any ideas would be most appreciated.
  Thank you.

  It seems that I solved the problem by running this:

  http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe
  that I found in a post on this thread:
  http://social.technet.Microsoft.com/forums/Windows/en-us/5366225a-46e7-4D6C-A389-8bd18a5c3aad/Windows-Firewall-damaged-by-Windows-7-antivirus-2012?Forum=w7itprosecurity

• XP Pro shortcuts do not work after the removal of virus

  had a virus (XP Internet Security 2011), cleaned and ran cc cleaner - now the shortcuts don't work unless I right click to uncheck the option «protect data...» "under the currently logged-on user account, or choose 'run as administrator '.

  Also if I open Control Panel I can not open all programs-ex firewall windows etc.

  I saved the front register CC Cleaner cleaned but restore it makes no difference. Try and find the XP Media and attempt a repair. All this before and know a correction that could save me a lot of time?

  Any suggestions would be greatly appreciated!

  Hi John,.

  You can then create a new profile for the user by the listed method: http://support.microsoft.com/kb/279783

  and copy the data using the index method: http://support.microsoft.com/kb/811151

  When you sign in as an administrator, you can rename your existing profile

  C:\Document and settings\

  Rename as desired. Now restart your pc and you connect with your normal login account.

  It will recreate a user profile with the same identifier. Now refer http://support.microsoft.com/kb/811151 and copy data from the renamed account of this new profile, would be easy.

  I hope this helps.

• yellow folder icons missing in the Bookmarks Manager

  yellow folder icons missing in the Bookmarks Manager

  Default theme of 22.0, 22 FF.
  22 FF, 20.0.1 compact Classic theme
  W7 sp1

  I have more yellow folder icons in the Bookmarks Manager. How to make a comeback?

  Thank you

  Favicon changer is no longer totally compatible and is is more updated.
  Removing it solved the problem.

• HP Officejet 6500 E710: How to create desktop icon to launch the Scanner dialog box?

  I would like to create a desktop icon to launch the Scanner dialog box. I'm not a fan of the approach to Tile Windows.

  Under Windows, 8.1, there was a desktop icon which allow me to connect to my Officejet 6500 unit and allow the scan to computer option. Who disappeared with the upgrade of Windows 10.

  I ran the print and Scan doctor and it solved the problems. When I went to test scanning, it arises from the familiar dialog box where I could choose different settings.

  It worked perfectly. But after having closed the doctor, I could not find any place to launch the new dialogue box, outside the doctor.

  I downloaded and installed the scanning HP and Capture app. It works very well, but I rather not leaving office to launch it, or use it enough to justify the taskbar setting.

  Is it possible to create a desktop icon for the application of scanning and Capture

  or

  is there a way to create an icon to launch the dialog box scan that print and Scan Doctor uses?

  I prefer this one.

  Hello
  
  Thank you for using the HP Forums.

  Is there a way to create the shortcut to scan on your desktop. Try the following steps:

  1. open a file Explorer

  2 C: > Program Files (x 86)

  3 program Files (x 86) > HP

  4 HP > HP Officejet 6500

  5 HP Officejet 6500 > Bin

  6 bin > Scanner HP

  7. right click on the analysis of HP and "create shortcut".

  You'll get a prompt that "Windows cannot create a shortcut here.  Do you want the shortcut to be placed on the desktop instead?    Select "Yes".

  Hope that helps!

• Windows 7 desktop icons move after reboot

  Hello world!

  This is the first time in my life (and I am 41) ask your question like this, windows product but I am already desperate with this annoying icon problem, and I consider myself an advanced PC user.

  I like to organize my desktop icons (and I have a lot) in my own way everywhere in the desktop for my comfort and until a few days ago they still reappeard on the same place where I put them after the restart or shutdown.

  A few days ago, I bought a new TV (LG LCD 80 cm) with a HDMI input and connect with my Nvidia GeForce 9400GT via a graphics card HDMI 10 m long hi-speed and turn on my PC. During the time of startup, I chose Windows 7 (either by the way, I have 3 OS-es on a HARD drive on separate partitions 3: WinXPpro Win7pro 64 bit, Ubuntu 11.04 64-bit) and when the loggin screen should appeard there was only white screen on my primary monitor, ACER A221HQ (22 "), connected by VGA cable. I couldn't even logg in Windows until it hits me, I better turn on the TV as well and BINGO, my loggin screen was on TV and not on my screen. Then I try to set my screen as main screen to be invited to have the obsolete Nvidia graphics card driver and I need to download the latest version. Is not not lazy i made cela, open the Nvidia Control Panel and set both views to clone fashion but the TV is to be marked as 1 (primary) and 2 (secondary) monitor and there is no option to manually set monitor as display a (primary).

  After that whenever I boot windows 7, that the desktop icons move to the left side of the screen little matter what I do in the menu desktop options.

  I guess this happens because windows now think my TV is the main display, not the monitor and send it so the Office on television to see that is turned off and then sends it to the screen, but with desktop icons rearranged for a stupid reason because I put resolutions on both screens to their native 1920 x 1080 resolution / 32 bit color / 60 Hz.

  Does anyone have an idea how to solve this problem? I tried to install this 3rd party software to save the position of the desktop icon, but it didn't work, I uninstall.

  Also this problem appears only on Windows 7, Windows XP have no problem at all, nor Ubuntu 11.04.

  Thanx.

  (Sorry for the grammatical errors, but English is not my native language)

  I'm sure you're right about the why behind it all, and I don't have an immediate solution.  However, I recommend a program of a company that has done a lot to work with and licensed a lot of Microsoft software.  It's an arrangement program called desktop icon by StarDock fences.  It might suit your needs.

• My URL/address bar is missing, after the delicious update. My search engine is missing after the delicious update. I can't figure out how to reactivate them. rhouwan@***.***, thank you.

  My URL/address bar is missing, after the delicious update.
  My drop-down search engine list is missing after the delicious update.
  I can't understand how turn them back on, please advise, thanks.

  You are welcome