After the upgrade to CS5 has lost the BACKSPACE...

Similar Questions

• After Run DEFRAG in VISTA has lost 37 GB of disk space

  I ran disk cleanup after my loss of hard drive space that remove all restore points except last option and I do not recover FROM my concert 37 loss of hard drive space.  What does Windows Vista DEFRAG! ???  He dé-compresser some old compressed files?  In addition, during the execution of the "System Tools" folder defragmentation, there no option to see you an analisys "REPORT" of the hard drive before or after the execution of the actual DEFRAGMENTATION.  In addition, for a disk hard 320 GB with ANY other running application (3 GB of memory on an AMD Turion TL-60 2.00 GHz HP Laptop) it took more than 24 hours for the defragmentation to finish.  Help!  I want my rear disc space!

  Hello Halima,

  It was an excellent and informative answer...  If you read my other two messages about this problem, I explained that I am very aware of the technical aspects of DEFRAG as system support for environments IBM Mainframe using IBM DEFAG back in the early 1980s.  My main concern was what happened to my DISK space.  Your reply explained what actually happened.  A little more complete history: it is a new DRIVE that I had just put into service (used CMS of TRANSFER of DATA to copy the entire volume, including the OS) upgrade to 160 GB to 320 GB.  He had worked flawlessly for two weeks.  I decided that I wanted a copy of my hard drive again and that he wanted to 'clean & not fragmented' volume before I copied it to a NEW 320 GB volume spare.  It was when I Defraged this week two used the volume I had my 'problem '.  I could get my space by manually deleting some files work and execution 'OWN DISC' system with deletes everything except the last system restore file.  Thanks for your time in my question ansewring.

• After a scan of Norton, has lost all the emails in the Inbox.

  Original title: to replace computer yesterday

  I did a norton scan, then we went to a reboot. The computer says that there is someone else connected, and they would lose data there. I clicked restart, when it came I had lost all my emails in the Inbox. How can I get back them, or go back one day.

  Hello

  1. you are using a mail client (Outlook Express) or a webmail (Hotmail)?
  2. who is the provider of mail service?

  Note : all system performing scan if data files that are infected can be cleaned by removing the file completely, i.e. There is a risk of data loss.

  
  I suggest you to perform system restore to a point when the computer was working fine.
  
  How to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084
  
  Note: to restore the email and contact, I suggest you contact your e-mail provider.

• After resetting Firefox, LCD screen has lost its sharpness - as there are some missing pixels - WHY?

  I have a PC running Windows 7 Ultimate. Lately when I'm in Firefox (running the most recent version), if I try to open more than one tab, Firefox slows down and I get the message "Mozilla Firefox does not. in a few seconds, regardless of site I try to open in the new tab opens; Firefox just seems to be morose. Finally, I tried to reset Firefox. After I did the reset, I noticed that the images on my screen (Acer LCD S200hl) appear to be less clear, even the wallpaper. As I type this, there seems to be holes in the image on the screen, as if the pixels are missing. Some letters look as if they are not completely filled. The only change is that I have reset Firefox.
  Any help will be appreciated.

  Where there is an incompatibility between Firefox and your graphics driver, try to disable the use of Firefox hardware acceleration. You could have done this once before, but of course, reset turns it back.

  the button Firefox orange (or the Tools menu) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  It will take effect after you exit and then restart Firefox. Any difference?

• my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

  my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

  Hi rog247,

  Thanks for posting here in Support of Apple communities! After reading your post, I see that your iPhone 4S shows 'No Service'. It is certainly important to have access to mobile data; I would like to help get this sorted out.

  Please follow the instructions here:
  

  If you see no Service or research

  If you see no Service or search on your device, or cannot connect to a cellular network or cellular data, follow these steps:

  1. Check your coverage area to ensure that you are in an area with a cellular network coverage.
     • If you cannot connect to a cellular network on your iPhone, make sure that the cell data is on in settings > cellular*. On your iPad, go to settings > cellular data.
     • If you travel internationally, make sure that your device is set up for data roaming. Go to settings > cellular > data roaming.
       
  2. Restart your iPhone or iPad.
  3. Looking for a carrier settings update.
  4. Update your iPhone or iPad to the latest version of iOS.
  5. Remove the SIM card and put it again. If the SIM card is damaged, or does not fit in the drawer of the SIM card, contact your carrier.
  6. Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.
  7. If you have another device, see if you can connect your business with her network to this place.
  8. Contact your operator for:
     • Make sure your account is active and in good and due form.
     • Make sure that there are no failures in your area.
     • Verify that your device is not blocked to receive cellular services and is set up with the right data plan.

  If you still cannot connect to a cellular network and have confirmed with your carrier is not a problem with your account, or your network, try to restore your device.

  If you cannot connect to a cellular network or cellular data - Apple Support

  See you soon!

• Time travel has stopped working after the upgrade to watch OS 3

  Hi all
  Since I upgraded to 3 watch OS stopped working time travel feature - by turning the digital Crown now does nothing.  The digital Crown works fine on the other screens, for example the notifications, but not on the dial of the watch itself.  I did a cycle power, but to no avail. Does anyone have information?

  Thank you
  Ray

  Come on, show on your iPhone in the app, then check the clock settings. There is an option to turn on or off; travel in time after the update to watch OS 3, it has been disabled by default for me.

• Does anyone know how to return the icons in the sidebar color safari?  My mac has lost this ability on the upgrade to El Capitan.  Thank you.

  Does anyone know how to get Safari sidebar icons to color?  My mac has lost this ability when I upgraded to El Capitan.  Thank you.

  rmcdga wrote:

  Does anyone know how to get Safari sidebar icons to color?  My mac has lost this ability when I upgraded to El Capitan.  Thank you.

  rmcdga ~.

  Safari sidebar slips into view, move the mouse to the left or by clicking on the icon in the toolbar.

  There are 3 menus through the albums has only 2 3 show any color.  This is part of the new flat design, minimal color (a bit like side bar of the Finder)

  Favorites - No.

  reading list - Yes (if photos)

  subscriptions: Yes

• HP Mini 210: Palm Desktop (see 6.2.2) lost address book during and after the upgrade to Windows from December 10

  The problem is not with the HP Mini. This computer is running Windows 7 Starter and he Hotsyncs perfectly with my Tungsten C handheld. The problem is with a Dell Vostro, but because it is a problem of Palm, I hope you can help.

  My Dell Vostro has been upgraded to Windows 10 in September. I had a few problem get the Palm to synchronize at this time, but I thought her and successfully synched bases Memo, address and the Date of all the way up to 10 Windows update that Microsoft pushed around Christmas.

  The first Hot Sync attempt after the update given my address book disappear from desktop ONLY (running version 6.2.2) and I was not able to find a way to restore the address book on the desk.

  Handheld still works fine. As I said the HotSync with the HP Netbook (Windows 7 Starter Edition) and I would like to continue to use it as long as ITO still works.

  Try using the Import/Export built-in in Palm Desktop.

  On the PC that contains the data, go to File/Export (while the address book is open and being viewed).  This will produce a file that you can copy to the Dell PC.  Use a flash drive, Cloud Computing service, card SD - it doesn't matter.

  On the Dell, go to file/import and locate the file.

  Windows 10 has caused some 'quirks' to appear in Palm Desktop.  We learn that we will!

  WyreNut

• I lost my msn icon after the upgrade to windows 7. How I connect msn plsu? What is the web address?

  I lost my msn icon after the upgrade to windows 7. How I connect msn plsu? What is the web address?

  Hello

  I suggest you to contact MSN customer support for assistance.

  Here is the link for "how to contact MSN Support.

  http://support.Microsoft.com/kb/940784

  I hope that helps!

• HDMI has stopped working after the upgrade to windows 8 Pro

  Hi all

  After upgrading my laptop to Windows 7 Ultimate for Windows 8 Pro (upgrade of the place) my HDMI output not working anymore.
  I use a nvidia Geforce 8200 M G graphics card, went to their website and downloaded the drivers of windows 8, but this did not help.
  Is what is happening when I plug the HDMI cable, the laptop screen goes black and there is no output to the TV I am trying to connect to. However, when you remove the HDMI cable, the laptop screen does not return to normal, but still rather dark. I tried pressing + P, but it does not help, and ultimately, I can't get the laptop screen showing something by a full reboot.
  Someone has a bright idea?
  Thank you!

  SOLVED (for me at least)

  I had the same problem after I upgraded my Acer Aspire 5745PG from Windows 7 to Windows 8. My second monitor via HDMI would not be recognized.
  Here's how I solved it: went to the website of the manufacturer (Acer in my case) and downloaded the NVIDIA for Windows 7 driver and installed it. Installation was a little buggy. I had to restore my computer to an earlier point, twice (make sure that you create a restore point before you start just in case where; google if you don't know how).
  In the end, the installation was successful. I plugged in my HDMI cable and second screen has increased as before I upgraded.

  IMPORTANT: Do NOT download the driver from the website of the manufacturer of the graphics card (NVIDIA, AMD, Intel,...). Go to the Web site (HP, Acer, Dell, etc.) of the manufacturer of your PC and find the. I tried the driver from NVIDIA that I have a NVIDIA Geforce Graphics card and it would not install. If you find that several display drivers for your specific PC model on the manufacturer's website you can try then one by one. I found 3 NVIDIA for my Acer 5745P. The second was the right thing.

  Good luck everybody!

• I need to re - install CS5 after having my hard drive has changed. But when I try it says ' serial number [removed] is valid but the product was not found on this computer HELP!

  I need to re - install CS5 after having my hard drive has changed. But when I try it says ' serial number [removed by Mod] is valid but the product was not found on this calculation? Help!

  More information about this error is also available onhttp://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html who can refer you to contact support if necessary.

  Concerning

  Stéphane

• relocation of cs5 or cs3 both have been upgraded to d/l engraved on asked to insert the cs3 and drive 5 but he was already in the drive I installed to win 10. CS5 has already been installed and turn off before the attempt to re - install. I then tried my

  My computer crashed and I tried to reinstall cs5 or cs3, both have been upgraded to d/l engraved on asked to insert the cs3 and drive 5, but he was already in the drive I installed to win 10. CS5 has already been installed and turn off before the attempt to re - install. I then tried my copy of CS3 same results. Then I tried CS2 it installs and works, but cannot activate online and the phone activation is no longer available it tells me to check the forums?

  First of all, that the software is old enough so that it does not at all with Windows 10... but

  An idea that MAY work to install or run some programs in Windows old 10

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  CS2 (or earlier version) software activation server replacement

  NOTE that CS2 will not install on a Mac "modern."

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• After the upgrade to windows 10, my dreamweaver has stopped working. Could someone give me a solution for this? I really need DW!

  After the upgrade to windows 10, my dreamweaver has stopped working. It starst and lasts 30 seconds and never work again.

  Could someone give me a solution for this? I really need DW!

  Problems during the installation or opening Dreamweaver on Windows 10

• A few years back, I bought CS5. because of my house having to repair my CS5 has been lost in the move. Then I had to take care of my mother who died later of cancer. I have now found my product, but the customer service person said that there is no newspa

  A few years back, I bought CS5. because of my house having to repair my Adobe CS5 has been lost in the move.  Then I had to take care of my mother who died later of cancer.  I have now found my product but the person said the customer service there is no newspaper of me purchase of the product.  I can't use the product that I bought because I don't have the registration code.  So could I please get a refund and I will return the edition teachers and students of CS5.  Thank you.

  @

  Quickly find your serial number

  Download the CS5 products

• The host has not enough space on the boot partition to store the image upgrade. It takes a minimum of size_in_MB. After the release of space or perform an installation from the CD-ROM.

  Hi everyone, the difficulties in trying to update the Update Manager. ESX4.1 to ESXi5.0

  Error I get is below to correct the scan before update:

  The host has not enough space on the boot partition to store the image upgrade. A minimum of 299MB is necessary. After the release of space or perform an installation from the CD-ROM.

  There is enough space in the local disk

  Size of filesystem used Avail use % mounted on
  / dev/sdd5 4.9 G 1.6 G 3.0 G 35%.
  / dev/sdd2 2.0 G 107 M 1.8 G 6% / var/log
  / dev/CCISS/c0d0p1 99 M 67 M 27 M 72% / Boot
  / dev/CCISS/c0d0p2 4.9 G 1.6 G 3.1 G 34% / esx3-installation
  / dev/CCISS/c0d0p1 99 M 67 M 27 M 72% / esx3-installation/boot
  / dev/CCISS/c0d0p7 2.0 G 101 M 1.8 G 6% / esx3-installation/var/log

  Cannot continue installation due to the lack of space and don't have the option upgrade CD directly (of complicated issues)

  Do you have any suggestions?

  Thank you

  It sounds like this host has already been improved 3.x! In this case you will not be able to upgrade to 5.x using the Manager to update because of the small partition/boot (99 MB).

  to remedy the hosts against a basic upgrade

  ... You cannot use Update Manager to upgrade to 5.0 ESXi host, if the host has upgraded ESX 3.x to ESX 4.x. These hosts have not enough free space in the partition/Boot to support the process of update Update Manager. Use either interactive or scripted upgrade.

  André