Agent installation causes stale vmtools

Similar Questions

• Converter Standalone Agent installation failed, error code: 1601

  Hi all

  I downloaded the VMware converter tryware version, to see if we can use this tool to create virtual machines from existing industrial PC.

  We intend to make a test remote backup to a XP to a laptop machine (to keep mobile in an industrial environment)

  I installed you VMware converter and disabled the firewall on both machines.

  I also disabled the network drives that are shared on the remote computer.

  When data powered the remote computer has been entered (ip address, username, PW, BONE family) and press us Next, the pop-up appears to deploy the Agent of Standalone converter.

  If you press 'Yes' to continue, after a minute or two the following message appears:

  -Converter Standalone Agent installation failed, error code: 1601 -.

  Can someone tell me what this error code means and how I can fix this error?

  Any help will be appreciated cincerely!

  Sincere friendships and thank you in advance,

  Marcel Lefèvre

  the Netherlands

  Can someone tell me what this error code means and how I can fix this error?

  Windows Installer error 1601 = The Windows Installer service could not be accessed. Contact your support team to verify that the Windows Installer service is properly registered.

  Additionally, make sure that the appropriate ports are open to allow the Windows agent to settle.

  Alternatively, you can manually install the converter on the remote system agent... and then try to restart the conversion (then there is no need to install anything).

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• The cluster Agent installation does not ask for password Agent

  Hi all
  I try to install configure the management agent on a few nodes of the RAC on Windows Server 2003 64-bit. I installed the agent on other hosts before, but not on clusters. Installation seems to be pretty simple, YES the other nodes automatically detects and installs on them. However, when I do the installation of cluster, I am never invited to the agent registration page register with the administration server. He's asking the host name of the server and port, but never the password. Then the agent installs and starts the service, he is never seen by the administration server.
  Has anyone encountered this before? Is it possible to save it now, or should I just try to reinstall manually?

  This is an expected on windows cluster behavior, registration of the agent will not be asked.
  Once the user installation must ensure the agent on each node manually by emctl sure agent \bin

• linux agent installation

  Trying to install 5.4.3.106 linux on centOS 6.5 agent.  This version of the agent is supposed to be compatible w/centos 6.5.

  at the end of installation, I have this error:

  kernel-devel - 2.6.32 - 431.e16.x86_64 is not available for the kernel running, run with a new kernel

  I know ZERO about linux, so what is causing this error?

  Thank you!

  Ran: yum install kernel-devel

  and yum update kernel

  then re-directed the facility.  Only the correction of the error

• Realtek 8185 Driver Windows Update installation causes system crash

  Install the Realtek 8185 Extensible 802. 11b / g wireless listed device driver as optional in windows update in windows 7 ultimate 64 bit results BSOD and system becomes unable to boot (System Restore will fix it).

  I am writing this to see if it is a special situation with my system or if it's a widespread problem, the following driver Details.

  Camera works great with the default driver, so if someone is going to tell me do not install this driver and look for another who is not the issue. Problem is that this driver in Windows update will cause the crash (BSOD) and system does not start until the restoration of the system is used.

  System Specs:
  OS: Windows 7 RTM x 64 Ultimate (new installation)
  P: AMD X 3 720
  M: 4 GB DDR3
  VC: GTX 260
  MB: Gygabyte MA790XT-UD4P
  (Related to the problem) wireless adapter: Realtek 8185 Extensible 802. 11b / g Wireless Device

  Driver details:
  Realtek Semiconductor Corp. - network - Realtek 8185 Extensible 802. 11b / g Wireless Device

  Download size: 409 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Optional

  Software update of Realtek Semiconductor Corp. network released in September 2009

  More information:
  http://winqual.Microsoft.com/support/?DriverID=20298246

  Help and Support:
  http://support.Microsoft.com/select/?target=hub

  Hello

  You must go to Realtek and get the current driver, it works fine on my system. Do not do it just
  means that you're stuck in the loop, you're in and the pilot trying to update Windows Installer is a
  an old man just certified for Windows (MS is far behind the pilot certification and accreditation is not
  means that they work properly).

  Good luck.
  Rob - bicycle - Mark Twain said it is good.

• Windows XP installation causes the laptop restart on the installing devices portion.

  I have a HP dv9000 series, which came with vista and I decided to downgrade to XP. After having inserted the WinXP CD and continue with the installation of the configuration, starts about 39mins and then begins to install devices that gets stuck and then to halfway through the process and my cell phone begins to turn off and then back on. When he turns on the system begins to restart the same installation configuration and then turn back off the coast to the installation of devices.

  Ive google which could help for hours. things like type SHIFT + F10 and then type tskmgr.exe and ending the files of svchost.exe. This was do nothing. The computer restarts again to the installation of devices.

  I read it could be a driver, but that the cause could be could be?
  We hope to get this fixed a problem and thank you all who try and help me.

  You can get the best expert advice for laptop HP attending the Forum Notebook HP. Carey Frisch

• HPDM: 'Update Agent' installs Version 4.4.3660.14029 instead of 4.5.3660.16180

  Hello

  I've got 4.5 HPDM Rev B installed. If I now run the "Update Agent" task on a client, it installs Version 4.4. However: If I check my master repository (I kid No. repositories), I see the 4.5 version it...

  So why doenst Version 4.5 to install on the Client?

  (I know: 4.5 Rev B is NOT the latest version of HPDM, but I can't imagine that's the problem...)

  Thank you for your support,

  Simon

  Hello

  There was a 'feature' in V4.5 who 'forgot' to update the agent files. I hope that you have installed V4.5 using the original version which had this function.

  I suggest strongly to download and install SP4 V4.5 because it corrects this problem and a few others as well.

  The V4.5 and Ms are ftp://ftp.hp.com/pub/hpdm/Software/4.5/ that all MS are cumulative, so that you can install SP4 straight on V4.5.

  There is also the chance that your FTP repository is the default not in V4.4. * and now the default in version 4.5. * This could mean that installation of version 4.5 updated in one place, but customers are always pulling respiratory FTP elsewhere.

  Please perform the installation of SP4 V4.5 first and then report.

  Concerning

  Andrew S.

• Windows 2003 Remote Agent installation problem.

  Dear team,

  I am facing a problem in the installation of the agent RA in win2003.

  Details:-

  1 windows 2003 server r2 SP2

  2. agent remotely 4.1.4.13.16

  3 operating system 32 bit version

  Kindly advice

  Kind regards

  Subash.c

  Hi Philippe,.

  There is a patch for version 4.1.4. 4.1.4 ACS must be installed before you install this hotfix.

  Instructions on how to install the patch

  ========================================

  1. make sure that Cisco Secure ACS Agent 4.1.4.13 is installed.

  2. extract the files NTlib.dll, CSLogAgent.exe, CSAgent.exe, CSWinAgent.exe, NAS.dll, ConsoleDLL.dll, csvLog.dll, EndPoint.dll & odbcLogger.dll of Acs - 4.1.4.13.16 - RA.zip

  3. stop the Cisco Secure ACS Agent service.

  4 locate CiscoSecure ACS Agent\bin and save a copy of the course NTlib.dll, NAS.dll, CSAgent.exe, CSLogAgent.exe, CSWinAgent.exe & EndPoint.dll

  5 copy the files NTlib.dll, CSLogAgent.exe, CSWinAgent.exe & EndPoint.dll extracted zip CiscoSecure ACS Agent\bin, NAS.dll, CSAgent.exe

  6 locate CiscoSecure ACS Agent\Support and save a copy of the current ConsoleDLL.dll, csvLog.dll & odbcLogger.dll

  7. ConsoleDLL.dll, csvLog.dll & odbcLogger.dll copy extract the files from the zip to CiscoSecure ACS Agent\Support

  6. start the Service Agent secure Cisco.

  Kind regards

  ~ JG

  Note the useful messages

• Guest OS Windows cloned Blueprint agent installation program

  According to the literature, it is supposed to be an installer is available at https://vcac-hostname.domain.name:5480 / installation

  When I browse to this page, I get a 404 error.

  Where can I get the installer of agent OS comments since?

  Their documentation is wrong... it should be https://vcac-hostname.domain.name:5480 / Installer

• Agent installation on Redhat Linux for managing database through grid

  Hi friends,
  
  Plan to add Oracle databases (we are now 6 databases) Grid control. Please specify the options available. We will choose based on our environment.
  
  Significant immediate responses
  
  Vincent

  Hello

  Seven options are available. Choose your option depending on your environment.

  1. agent deploy Application
  2 installation of the agent mounted by NFS
  3 agentDownload script

  for example: chmod 755 agentDownload.linux & utilisation./agentDownload.linux

  4 installation of the cluster Agent
  5. cloning management agent
  6 installation of the interactive Agent through YES
  7. silent

  for example: responsefile

  It could be that useful...

  Thank you
  LaserSoft

• See 4.6, no Option of Agent composer Agent Installation...

  When we try to install the Agent from the view on our vm office to serve as the Parent virtual machine for our composer vm, the Agent of the composer is not an option on the installation.

  We are using VMware-viewagent-x86_64 - 4.6.0 - 366101.exe.  I also tried the Installer 4.5 VMware-viewagent-x86_64 - 4.5.0 - 293049.exe and I got the same result.  The only options are:

  See Agent

  USB redirection

  PCoIP Server

  PCoIP smart card

  I tried to install the Agent with all the features available, but the composer vm is created from this image has resulted in an error:

  Discovers the error of initialization of the agent (-65535) composer status: View Composer agent is not installed in the computer master virtual

  There is a sine qua non for the composer Agent that I'm missing?

  Any help is greatly appreciated.

  -Dan

  Please ensure that you have VMware installed on your agent machine tools.

  If Vmware tools is not present in the VM agent, install will not view composer and related components.

  To install VMware tools, right click on the VM-> comments-> installation/upgrade VMware Tools. Reboor the virtual machine and proceed with the installation of the Agent from the view.

• The Agent installation to view Vmware on a virtual PC on the player or workstation

  Hi all

  We have a problem where by we have a PC running Windows XP with player installed on it.  Then, build us our image of default on PC and install the vmware tools.  We then install the Agent view on it, but he asks us for the default server which I don't want to specify at that time here.  If I do the above actions on an ESXi server then the Agent does not ask us for the default server.  I looking for the agent on the position of the player he can find on the ESXi server, but not on the drive?

  Thank you in advance.

  Kind regards

  Rob

  OK, it's a summer product your unmanaged desktop "unmanaged" witch of office is defined as any machine is not running on an ESX Server.  You can reivew the instructions on installation for a desktop computer unmanaged on page 204 in the following link http://www.vmware.com/pdf/view40_admin_guide.pdf.   I'm sorry to say vCenter earlier, but for some reason it was sticking out in my head.

  In the end, you will need to give the person the name of connection broker.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Problems with the new Agent installation 12

  Hello
  
  Installed a new officer on 12 c, the installation was successful.
  But the Agent status is not properly in the Console.
  
  Why? All possible cases?
  
  s/n

  Hello

  Thanks for the pointers...

  When you use the b_startAgent parameter.
  After installation, there are the 3 steps:

  1 start the agent of
  . / emctl start agent

  2. Add the target
  . / emctl config agent addinternaltargets

  3 configuration of the Plugin
  /Core/12.1.0.1.0/Perl/bin/perl /core/12.1.0.1.0/bin/AgentPluginDeploy.pl - Origine_oracle /core/12.1.0.1.0 - agentDir - pluginIdsInfoFile /plugins.txt - action set - emStateDir

  Once the steps above carried out, check the status. If possible once syncing of the agent as well.

  Go to the Home Agent and the "agent" dropdown select resynchronization.

  Best regards
  Vincent

• Agent installation

  Dear friends, I tried installation guide step by step for the agent. My goal is to see a new database on a different host. Could you please explain to me should I install agent and deploy a new grid control?
  Oracle 11g EM rack 11 R1, Windows 2003
  
  Published by: Rodriguez on 09.04.2012 09:40

  Hello

  + agent 10.2.0.4, clearstate can be used.

  Find below the steps to re - synchronize the console agent:

  + connection to the console of the grid user sysman

  + Click on setup

  + Click the sub-tab of the agents

  + Click on the name of the problematic agent

  + On agent homepage, click on the "Resycnhronize" button on the top of the right hand of the page.

  Best regards
  Vincent

• QUESTION: Extracting data Essbase and ODI Agent installation?

  To extract the data of Essbase cubes, ODI has 'LKM Hyperion Essbase DATA to SQL'.
  We can use (1). ReportScript, or (2). An MDX query or (3). CalcScript
  
  For the extraction of data by using CalcScript, ODI Agent must be running on the same server as the Essbase server.
  
  Anyone know if there is a need for ODI Agent on the Essbase machine if we use the method of MDX query for the extraction of the data?
  
  We would like to avoid the installation of Agent ODI for Essbase-extraction of data.
  
  
  
  
  
  .

  It's just for the Calc script method because it has access to the exported file, you should be fine with the other methods.

  See you soon

  John
  http://John-Goodwin.blogspot.com/