Aironet 1142 standalone, no clients can connect to this topic.

Similar Questions

• 11201 client can connect to 8174?

  Hello
  11201 client can connect to 8174
  I can see in Client / Server / Support of interoperability between different Versions of Oracle [207303.1 ID]
  
  It is not, but some dba claims it works fine?

  I don't think it will work (as the MOS - Doc you noted States) - I think that you will get a "closed connection TNS-12537" or a similar error.

  HTH
  Srini

• Y does it does anyone know how many client can connect at the same time on the Microsoft VPN server?

  Hello everyone

  Is there anyone know how many client can be connected same time on microsoft VPN Server?

  Thank you

  Original title: VPN Windows Server 2012

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• RV082 VPN Client can connect only for 6 minutes

  Hello

  I have a RV082 with firmware 1.3.98 - tm.

  The problem I have is that a Client with Windows XP SP3 can connect only for 6 minutes exactly.

  In addition, a windows appears on the client saying that the remote system is not respoding and asking to wait or not.

  We have also applied fix for Windows XP described here:

  http://www.linksys.com/servlet/Satellite?blobcol=urldata&blobheadername1=Content-Type&blobheadername2=Content-Disposition&blobheadervalue1=text%2Fplain&blobheadervalue2=inline%3B+filename%3DQVPN%2BClient%2Bv1.2.11%2BRelease%2BNote.txt&blobkey=id&blobtable=MungoBlobs&blobwhere=1193800512161&ssbinary=true&lid=3723833685B09

  http://support.Microsoft.com/kb/889527/en-us

  I have restart the RV082. What can I do else?

  Thank you very much

  Oliver

  The problem was the NAT in the ADSL modem. I tryied changing the ADSL modem and the problem is solved.

  Thank you

  Oliver

• Cisco ASA 5510 - Cisco Client can connect to the VPN but cannot Ping!

  Hello

  I have an ASA 5510 with the configuration below. I have configure the ASA as vpn server for remote access with cisco vpn client, now my problem is that I can connect but I can not ping.

  Config

  ciscoasa # sh run

  : Saved

  :

  ASA Version 8.0 (3)

  !

  ciscoasa hostname

  activate the 5QB4svsHoIHxXpF password / encrypted

  names of

  xxx.xxx.xxx.xxx SAP_router_IP_on_SAP name

  xxx.xxx.xxx.xxx ISA_Server_second_external_IP name

  xxx.xxx.xxx.xxx name Mail_Server

  xxx.xxx.xxx.xxx IncomingIP name

  xxx.xxx.xxx.xxx SAP name

  xxx.xxx.xxx.xxx Web server name

  xxx.xxx.xxx.xxx cms_eservices_projects_sharepointold name

  isa_server_outside name 192.168.2.2

  !

  interface Ethernet0/0

  nameif outside

  security-level 0

  address IP IncomingIP 255.255.255.248

  !

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP 192.168.2.1 255.255.255.0

  !

  interface Ethernet0/2

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Ethernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  nameif management

  security-level 100

  IP 192.168.1.253 255.255.255.0

  management only

  !

  passwd 123

  passive FTP mode

  clock timezone IS 2

  clock summer-time EEDT recurring last Sun Mar 03:00 last Sun Oct 04:00

  TCP_8081 tcp service object-group

  EQ port 8081 object

  DM_INLINE_TCP_1 tcp service object-group

  EQ port 3389 object

  port-object eq ftp

  port-object eq www

  EQ object of the https port

  EQ smtp port object

  EQ Port pop3 object

  port-object eq 3200

  port-object eq 3300

  port-object eq 3600

  port-object eq 3299

  port-object eq 3390

  EQ port 50000 object

  port-object eq 3396

  port-object eq 3397

  port-object eq 3398

  port-object eq imap4

  EQ port 587 object

  port-object eq 993

  port-object eq 8000

  EQ port 8443 object

  port-object eq telnet

  port-object eq 3901

  purpose of group TCP_8081

  EQ port 1433 object

  port-object eq 3391

  port-object eq 3399

  EQ object of port 8080

  EQ port 3128 object

  port-object eq 3900

  port-object eq 3902

  port-object eq 7777

  port-object eq 3392

  port-object eq 3393

  port-object eq 3394

  Equalizer object port 3395

  port-object eq 92

  port-object eq 91

  port-object eq 3206

  port-object eq 8001

  EQ port 8181 object

  object-port 7778 eq

  port-object eq 8180

  port-object 22222 eq

  port-object eq 11001

  port-object eq 11002

  port-object eq 1555

  port-object eq 2223

  port-object eq 2224

  object-group service RDP - tcp

  EQ port 3389 object

  3901 tcp service object-group

  3901 description

  port-object eq 3901

  object-group service tcp 50000

  50000 description

  EQ port 50000 object

  Enable_Transparent_Tunneling_UDP udp service object-group

  port-object eq 4500

  access-list connection to SAP Note inside_access_in

  inside_access_in to access extended list ip 192.168.2.0 allow 255.255.255.0 host SAP_router_IP_on_SAP

  access-list inside_access_in note outgoing VPN - PPTP

  inside_access_in list extended access permitted tcp 192.168.2.0 255.255.255.0 any eq pptp

  access-list inside_access_in note outgoing VPN - GRE

  inside_access_in list extended access allow accord 192.168.2.0 255.255.255.0 any

  Comment from inside_access_in-list of access VPN - GRE

  inside_access_in list extended access will permit a full

  access-list inside_access_in note outgoing VPN - Client IKE

  inside_access_in list extended access permitted udp 192.168.2.0 255.255.255.0 any isakmp eq

  Comment of access outgoing VPN - IPSecNAT - inside_access_in-list T

  inside_access_in list extended access permitted udp 192.168.2.0 255.255.255.0 any eq 4500

  Note to inside_access_in of outgoing DNS list access

  inside_access_in list extended access udp allowed any any eq field

  Note to inside_access_in of outgoing DNS list access

  inside_access_in list extended access permit tcp any any eq field

  Note to inside_access_in to access list carried forward Ports

  inside_access_in list extended access permitted tcp 192.168.2.0 255.255.255.0 any DM_INLINE_TCP_1 object-group

  access extensive list ip 172.16.1.0 inside_access_in allow 255.255.255.0 any

  outside_access_in of access allowed any ip an extended list

  outside_access_in list extended access permit tcp any any eq pptp

  outside_access_in list extended access will permit a full

  outside_access_in list extended access allowed grateful if any host Mail_Server

  outside_access_in list extended access permit tcp any host Mail_Server eq pptp

  outside_access_in list extended access allow esp a whole

  outside_access_in ah allowed extended access list a whole

  outside_access_in list extended access udp allowed any any eq isakmp

  outside_access_in list of permitted udp access all all Enable_Transparent_Tunneling_UDP object-group

  list of access allowed standard VPN 192.168.2.0 255.255.255.0

  corp_vpn to access extended list ip 192.168.2.0 allow 255.255.255.0 172.16.1.0 255.255.255.0

  pager lines 24

  Enable logging

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  management of MTU 1500

  pool POOL 172.16.1.10 - 172.16.1.20 255.255.255.0 IP mask

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 603.bin

  don't allow no asdm history

  ARP timeout 14400

  NAT-control

  Global (outside) 2 Mail_Server netmask 255.0.0.0

  Global 1 interface (outside)

  Global interface (2 inside)

  NAT (inside) 0-list of access corp_vpn

  NAT (inside) 1 0.0.0.0 0.0.0.0

  static (inside, outside) tcp Mail_Server 8001 8001 ISA_Server_second_external_IP netmask 255.255.255.255

  static (inside, outside) tcp Mail_Server 8000 ISA_Server_second_external_IP 8000 netmask 255.255.255.255

  static (inside, outside) tcp Mail_Server pptp pptp netmask 255.255.255.255 isa_server_outside

  public static tcp (indoor, outdoor) Mail_Server smtp smtp isa_server_outside mask 255.255.255.255 subnet

  static (inside, outside) tcp 587 Mail_Server isa_server_outside 587 netmask 255.255.255.255

  static (inside, outside) tcp Mail_Server 9444 isa_server_outside 9444 netmask 255.255.255.255

  static (inside, outside) tcp 9443 Mail_Server 9443 netmask 255.255.255.255 isa_server_outside

  static (inside, outside) tcp 3389 3389 netmask 255.255.255.255 isa_server_outside Mail_Server

  static (inside, outside) tcp 3390 Mail_Server 3390 netmask 255.255.255.255 isa_server_outside

  static (inside, outside) tcp Mail_Server 3901 isa_server_outside 3901 netmask 255.255.255.255

  static (inside, outside) tcp SAP 50000 50000 netmask 255.255.255.255 isa_server_outside

  static (inside, outside) tcp SAP 3200 3200 netmask 255.255.255.255 isa_server_outside

  static (inside, outside) SAP 3299 isa_server_outside 3299 netmask 255.255.255.255 tcp

  static (inside, outside) tcp Mail_Server www isa_server_outside www netmask 255.255.255.255

  static (inside, outside) tcp Mail_Server https isa_server_outside https netmask 255.255.255.255

  static (inside, outside) tcp Mail_Server pop3 pop3 netmask 255.255.255.255 isa_server_outside

  static (inside, outside) tcp imap4 Mail_Server imap4 netmask 255.255.255.255 isa_server_outside

  static (inside, outside) tcp cms_eservices_projects_sharepointold 9999 9999 netmask 255.255.255.255 isa_server_outside

  public static 192.168.2.0 (inside, outside) - corp_vpn access list

  Access-group outside_access_in in interface outside

  inside_access_in access to the interface inside group

  Route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout, uauth 0:05:00 absolute

  dynamic-access-policy-registration DfltAccessPolicy

  Enable http server

  http 192.168.2.0 255.255.255.0 inside

  http 192.168.1.0 255.255.255.0 management

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp - esp-md5-hmac transet

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto-map dynamic dynmap 10 set pfs

  Crypto-map dynamic dynmap 10 transform-set ESP-3DES-SHA transet

  cryptomap 10 card crypto ipsec-isakmp dynamic dynmap

  cryptomap interface card crypto outside

  crypto isakmp identity address

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 30

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  No encryption isakmp nat-traversal

  Telnet 192.168.2.0 255.255.255.0 inside

  Telnet 192.168.1.0 255.255.255.0 management

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd dns xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx interface inside

  dhcpd domain.local domain inside interface

  !

  a basic threat threat detection

  host of statistical threat detection

  Statistics-list of access threat detection

  Management Server TFTP 192.168.1.123.

  internal group mypolicy strategy

  mypolicy group policy attributes

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value VPN

  Pseudo vpdn password 123

  vpdn username attributes

  VPN-group-policy mypolicy

  type of remote access service

  type mypolicy tunnel-group remote access

  tunnel-group mypolicy General attributes

  address-pool

  strategy-group-by default mypolicy

  tunnel-group mypolicy ipsec-attributes

  pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  inspect the pptp

  !

  global service-policy global_policy

  context of prompt hostname

  Cryptochecksum:b8bb19b6cb05cfa9ee125ad7bc5444ac

  : end

  Thank you very much.

  Hello

  You probably need

  Policy-map global_policy

  class inspection_default

  inspect the icmp

  inspect the icmp error

  Your Tunnel of Split and NAT0 configurations seem to.

  -Jouni

• What client can connect to the server ESX 2.5.2?

  Asked me to restart a computer virtual running in ESX Server 2.5.2. Y at - it a client vSphere for this or do I need something else? I started with VMWare 4.0.0 if this old box is a bit before my time...

  I found what I needed in this reference http://www.vmware.com/pdf/esx25_admin.pdf

  Look at page 79 for the overview: using the VMware Management Interface

  Then on page 82 for details: using Internet Explorer 6.0 to access the VMware Management Interface

  It doesn't seem to work best with Internet Explorer 6. I had no luck with IE7, but don't spend too much time on him.

  See you soon

• I get a connection error mesaage when entering a Web site, every day I get on this subject, and I can't to this topic on other browsers?

  OK, for some reason, today, I'm not able to get on one of the sites I hear me every day, and I just can't get that up on IE or google chrome, I'm on a laptop on wifi from school just to let you know. Is there something I can do?

  Other people around you may get on this site? It's maybe down or the wi - fi network presents a routing problem.

• updated mozilla 9.0.1, opening of firefox get 2 tabs being boring "what's new in firefox. Got rid of him yesterday, but today when you are connected to this topic reappeared

  I've updated to Firefox v 9.0.1 and found when opening Mozilla 2 tabs appear. I just want my coming home page. It is very annoying. The 2nd tab is that keeps you pleased and tells you what's new in firefox.

  Hi Cardy,

  You should look at this article on this specific issue and Preferences not savedarticle. It could be a problem of pref.js. It should give you all the information you need!

  If this does not work:

  1. Enter about: config in the address bar
  2. Click I'll be careful, I promise you if prompted
  3. In the filter field, type Startup
  4. Double click on startup.homepage_override_url
  5. Delete the text string, and then click OK
  6. Close Firefox and reopen the window to check that it worked.

  Hope this helps!

• Need help to set up AP 1142 standalone

  Hi all

  Need help. I am trying to configure Cisco Aironet 1142 standalone, this access point has been previously connected to WLC and the previous post, I found that we need to delete and reload the AP

  private-multiple-fs, c1140-k9w8 - mx.124 - 21A .JHA

  Now when I try to configure the IP address for the AP, he is in error:

  Ip address of AP1142 #lwapp ap 10.61.1.151 255.255.255.0
  ERROR! Command is disabled.
  AP1142 #.

  Current flash content:

  AP1142 #dir
  Directory of flash: /.

  2 - rwx 10264 March 1, 2002 01:25:57 + 00:00 private-multiple-fs
  3 - rwx 90396 March 1, 2002 01:18:04 + 00:00 event.log
  drwx-5 128 1 March 2002 00:12:24 + 00:00 c1140-rcvk9w8-mx
  8 - rwx 0 March 1, 2002 01:26:06 + 00:00 config.txt
  9 - rwx 337 March 1, 2002 01:18:04 + 00:00 env_vars

  total 32385024 bytes (30019584 bytes free)
  AP1142 #.

  Please let me know whatelse is required for the configured in stand-alone mode access point.

  Thanks in advance

  The image that is on the device's LWAPP, not the autonomous... If you want to use the AP autonoous mode then the image must be W7... It's...

  C1140-k9w7 - mx.124 - 21A .JHA not c1140-k9w8 - mx.124 - 21A .JHA.

  Please feel free to download any image from the below link and perform the conversion of image LWAPP to stand alone...

  http://tools.cisco.com/support/downloads/go/PlatformList.x?sftType=IOS+Software&mdfid=282439881&treeName=Wireless&mdfLevel=Model&url=null&modelName=Cisco+Aironet+1140+Access+Point&isPlatform=N&treeMdfId=278875243&modifmdfid=null&imname=&hybrid=Y&imst=N

  the methos to convert is...

  Download TFTPd32 of google and install it on your PC... point of the image that you downloaded on the TFTP server.

  Connect a cable ethernet between your notebook and AP... both should be on the same subnet... Connect a cable from the console and access the hyperterminal console with the command...

  AP > en

  AP #debug lwapp console cli or debugging console cli capwap

  T AP #config

  AP (confg) int FA 0

  AP(confg-IF) ip addr (same subnet as the laptop)

  End AP(confg-IF)

  Force - reload DOWNLOAD - AP #archieve sw / overwrite tftp: / /.

  This will solve the problem...

  Concerning

  Surendra

• Why one of my yahoo mail can connect to the iphone ipad but can't connect to imac?

  I have iMac OS X Yosemite version 10.10.5,

  size 21.5 inches, end of 2013. Processor 2.7 GHz. 8GB memory.

  I have 2 yahoo email account to connect to my imac.

  last night suddenly one of my mail yahoo asking to reenter the password. After you enter the password, it says that can not verity the user name or password. I try fixed so the system pref - internet account with delete yahoo mail add it it yet this yahoo mail again by saying who cannot check this mail.

  I check on my iphone and ipad for this email. This yahoo mail has no problem on ipad & iphone. I have delete and add this email on ipad & iphone yahoo account, e-mail account yahoo adds normally without any problems.

  I have restart & close my iMac and then try to add this yahoo mail, still unverified. 2 emails yahoo account to connect to my iMac, a mail has no problem. I change my yahoo mail password and reconnect to the iMac still unverified.

  If I go to the browser and connect you to this mail from yahoo to safari, it works I can connect to this yahoo mail.

  Please help, why one of my yahoo mail cannot connect to my iMac?

  Thank you

  Visit the Web of Yahoo e-mail / your account and see if there is an option to allow you to sign up with any safety.

• You can connect Apple TV thru or with decoder

  Can hang you with an Apple TV cable box at the same time

  Depends on your decoder.

  Apple TV using HDMI.

  If your cable box has a HDMI passthrough you can connect in this way.

  Otherwise, why would you want it to go through the cable box?

• I can't add a second e-mail account. I get a message next to the 'User name' or password invalid password field. I can connect to the web gmail ok, imap is enabled.

  I setup a gmail account to and works very well. When I try to add another gmail account, I get an error 'User name' or invalid password. I can connect to this second gmail via the web to gmail account and the account active imap.

  PS - I use these accounts for the years through the web

  Thank you

  I also tried to delete completely the TB and reinstalled to try the problem gmail account and it still doesn't work.

  When checking on the 2-factor authentication, which I use, I noticed something. The work gmail account has allowed access to less secure applications"and my problem of account does not. I activated that and managed to add it to the TB. Everything works now!

  Not sure if less secure applications is a good thing, but its working.

  Thanks Christ1

• How to create users that can connect to the application?

  Hello
  
  
  As an example of Application provided by APEX, in this application, the administrator can create users and reset passwords, and the user can connect to this application. How is this happening?
  
  Now I know how to create users and reset passwords through the corresponding working table.
  
  But I don't know how to use the user to to connect to the application? I tried several times to use the user create by ADMIN to connect to the application, but I failed.
  
  I can't find any setting in the sample Application, but it do.
  
  If any good plans?
  
  I thank in advance.

  There are two ways you can handle this... Build users of the APEX and continued them through the api of the APEX (not recommended by what I saw several comments here, outside the development environment) OR in your application, you could build a custom authentication system...

  Here is a link to explain how make one:
  http://djmein.blogspot.com/2007/07/custom-authentication-authorisation.html

  Thank you

  Tony Miller
  Webster, TX

• The client (Windows XP, Vista, Windows 7) users can connect to Microsoft Small Business Server 2008?

  Dear all,

  I intend to install on Server 2008 SBS Active Directory domain controller. In this session, I would like to know the client users can connect to the SBS server or not. If CAN, I want to know the steps & solutions on this answer and if NOT, why the clients could not connect to the SBS server.

  Server 2008 SBS can also be installed on the sequence of steps:
  SBS 2008 (AD, Exchange Server, SQL 2005 or 08, CRM4.0). It depends on the situation of the organization.

  I really want to know that, if we install steps on SBS 2008 above, can clients connect to the server?

  Kind regards
  Tun Aung Kyaw

  Hi Geraldine Tun.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• This computer can't connect to the remote computer. ONLY 2 people it out 200 users...? baffeled by WindowsXPe Thin Client RDP connection

  Here's the situation.  We have 2 TS servers running WIN2K3 and 200 users with Thin Clients.  We'll call it the first server A and b of a second.

  They normally connect to an IP address and they will be directed to the server A or B according to the load.

  However; users can still select the specific TS server, they want to connect to.

  If user 1 and user 2 cannot connect to Server B.  They get the error listed above in the title.  However the user 1 and 2 can connect to A server.  If they say:

  192.168.123.2 the two of them get

  192.168.123.3 the two of them cannot get.

  I deleted the user de.3 A profile and it still can't get.  I have checked no orphan key inHKEY_LOCAL_MACHINEMicrosoft\Windows NT\CurrentVersion\ProfileList

  I checked the settings in TSCC. MSC, I' checked worm Licensing by user and they are good, I gave them full administrator privileges and still not pass via the serveur.3, they adhere to all groups within the ORGANIZATIONAL unit that they can connect to TS, they were able to connect to her very well this back on Wednesday.  It is not a firewall issue and port 3389 has been verified in the case otherwise he would not just these two on each CT they try.

  Again, they can get utilisant.2.

  In the event de.3 Viewer I can see users connected CORRECTLY but then it pop their right.  There is no other error message when connecting, just the success Message in the security log.

  Let's bounce servers tonight so I'll have to turn it back on and I pray that they can later log on this server, but I'm baffeled.  Why only 2 people would receive this question and most (not sure how many others there may be, but I know 30 people connected today on this server and worked out of it) people are not getting an error.

  The thin client on their desktop is not the issue, because the error follows them any CLIENT LÉGER, they are connecting from.

  Short of this re-boot and short to delete accounts and recreate them, ideas?

  Found the problem.  I did not remove the key to all the indicated previously.  I should have done that for this user since her CentralProfile Key was empty when she had to be filled in by the system.  Removed his Key specific SID for listed above point and viola.  User can connect.