AirPort Express 'expand' works not

Similar Questions

• AirPort Express - ethernet works, not wi - fi

  Just got from an appt to Genius Bar in which technology shows that my Express does not model AP A1392 works fine when connected with an ethernet cable. I repeated the process when I got home and indeed was able to add the AP Express to my network - where he worked very well in mode wi - fi for several years.

  However, when the cable is unplugged and that the AP in the room next door where it belongs, Express I get is orange flashing - once again. Then ethernet working, WiFi not so much. Of course several resets were considered, and the entire network rebuilt w / AP Utility. The base station AP Extreme and Express other, AP (much older) right hook to the top, but not my A1392 model.

  In the hope there an easy solution somewhere. Thank you!

  If you unplug ethernet then the entire setup of the express must extend the roaming wireless change.

  It is better to do the installation in the same room as the router wireless, that you intend to connect... Place the express within 8' (2 M for example) of the router or AP... do a factory reset and reconfigure... the Express should go via the airport Wireless Utility Setup Wizard automatically extend mode and work very well... Make you think that.

  You can then move it to the desired location.

  What can happen that here is the signal of something else in your network... is greater than the extreme radio or whether... and you cannot extend twice... If this does not work... I experienced it myself using too many Extenders. The express tries to connect to the incorrect device and fails.

  You must place the Express at the location where the signal is BEST router will connect with.

• Airport Express (1st generation) not connect to iPhone 6 iOS 10.0.2

  I am trying to connect and listen to music from my iPhone 6 iOS 10.0.2 through the music app. My phone does not see the Airport Express Terminal more. All I see is my Apple TV. I can connect to the Airport Express terminal when I use iTunes on my computer. My iPhone is used to connect to the Airport Express Terminal.

  I checked my Airport Express for the updates and it is updated in accordance with the programme of AirPort and PC utility App.

  AirPort Express (1st generation)

  Version: 7.6.7

  I also tried to restart the AirPort Express.

  Any ideas on how to make of this connect on my iPhone?

  Thank you!

  Hello...

  Try a reset > reset an airport base station FAQ - Apple Support

• Airport Express - USB drive not visible in the finder

  I have a brand new Airport Express that I currently use as an Extender for our old time Capsule. I would like to share a USB between computers. The Aiport utility see the drive.

  

  

  However, the Finder does not show the drive.

  In the future this extreme with a USB (mini 4 TB drobo) will be in our caravan to help us to do video editing and blogging with 2 computers on the road.

  Finder are not displayed at the start of the drive, but it should display the AirPort Extreme under the Shared heading in the left side of the Finder window.

  In the example below, my AirPort Extreme (called AEBS) has a drive named 500 GB drive connected to the USB port at the back of the unit.

  

  By clicking on the AEBS, another window displays the name of the player on the right side of the window.

  

  Double-click to mount the drive on the desktop.

  

  Now you can drag and drop files on the disc icon, or open the drive and drag the files into the opened window, which represents the drive.

• Airport Express stops working after that put 7.7.7 upgraded to Time Capsule

  I was able to update my firmware for my Time Capsule airport, but now my two devices Airport Express, which gave me "an unexpected error has occurred", seem to be in 'brick' and I can not even time Capsule to recognize after a reset.  I even spent my firmware to see if that was the problem... nothing.  Please help

  At this point, is the time Capsule still loaded with an earlier version of the firmware or is it still in 7.7.7? Nevertheless, I would say that you do a ' default ' reset on each of the affected AirPort Express base stations to their "out-of-the-box" configurations

  Depending on your answer to the first question, we can proceed from there.

• Apple Airport express records is not on the wifi network

  HI, I bought an Apple Airport Extreme new several months and I haven't connected my Airport Express so far. For some reason, the Airport Express is same does not record on the network. I unplugged for several minutes and plugged in. I don't know if there may be a software update that I missed?  Someone had this problem?  I would be grateful for any help. Thank you! Chuck

  If you have not reset the Terminal AirPort Express to settings by default and then set up again to extend the network provided by the AirPort Extreme... so now may be a good time to do this.

  As it is, the Express is not "appear" on your network because it has not been provided with the settings to do.

  If you need some advice on how to get the Express running... we will need a little more information from you as follows:

  (1) your AirPort Express Terminal has two Ethernet ports... or... does he have one?  If is has one, we need to model on the side of the unit number. It starts with an "A" followed four digits.  For example... A1264.

  (2) AirPort Express Terminal will connect to the network using a permanent connection to the Ethernet cable wired to AirPort Extreme... or... the Express will connect wireless?

  (3) what device you use to configure the AirPort Express Terminal?

  (4) If you have a Mac, we need to know what operating system they are running. If you are not sure about this, click on the Apple icon in the upper left corner of the screen, then click on about this Mac and post back with the Version of OS X number that you see there.

• Airport express appears is not on the iPhone, macbook pro

  My express airplay airport appeared on iTunes (macbook pro with El Capitan), but it does not appear on my iPhone (6 s more with the last update iOS 10.0.2).  I have an old iPhone (iOS 9.3.5) 5 c and airtime appears that iPhone.  Don't know why I can't see it on my main iPhone, can not see on macbook pro on option of airtime on the menu bar top-side wifi unique display and clock are located.   On macbook pro if I open iTunes it appears through the iTunes program.  I restarted all my routers, modem, computer and telephone, still no luck.  Any suggestions to find my airplay?

  I solved this, new ios10 a little goofy.  See this link: Re: problem airplay ios 10

  Still not listed is not on my macbook pro well.  If I go into the audio output on computer settings I'm able to find, very strange.

• Airport Express not on my network more

  My Airport Express has worked wonderfully for years. Today when I tried to use AirPlay, it shows that the Airport Express Terminal dropped out of the network. The network works fine everywhere else, iMac, iPhone, iPad Pro...  I checked the plug and it works fine. Also, I have plugged and unplugged the power cord from the socket and rear of the machine.  I also tried to reset. What can I do else? The Airport express has just been? I had about 4-5 years.

  Five years, on average, is about that for a router designed for home use, so it can be discussed here.

  Suggest that you perform a hard reset on the Express and try to set it up again. To do this, turn on the Express for a few minutes, then press and hold the reset button on the Express for 7 to 8 seconds and release.  Allow a minute for the Express restart to a slow status of amber light flashes.

  Try to implement the Express again. If the Express will not properly configure, or it will not stay on the network, it's time for a new AirPort Express Terminal.

• Airport Express connection problem

  I have an old Airport Express I can not connect to.  My utility program Airport says that it does not support this Airport Express device.

  The version of AirPort Utility which is required to administer the old 802.11 g AirPort Express does not work with newer versions of Mac OS X or on iOS devices. You would need either a Mac OS X lion or earlier, or a PC running Windows XP or 7 that does not have the correct version for this base station.

  In addition, a base station that old was its useful life and it can be much simpler to replace it with a newer model.

• Airport Express connects to my WiFi bridge

  Hello world

  It is searched many Web pages and throughout the Apple support forums, but I still could not understand...

  I bought recently Airport Express to extend my Wifi in another room and thus use it for AirPlay. My existing WiFi network is set up by the router, Asus RT - N12 (it is connected to our modem from the vendor to the scale of home - isn't available). I want to my Airport Express to work as bridge, connected to the existing network and to serve as extension and receiver airplay.

  It works only when I connect Airport Express via LAN cable to the Asus router and set it as the new network. This is not convenient because it is located near the router and does not provide any additional coverage to our Wifi.

  I tried to set up the base Airport Express "Extend existing network." But once set, it REQUIRES connection via cable. To connect to the existing WiFi network, there is NO other choice. This option is missing in the Airpot utility, so I can't select the Wifi to connect to.

  In addition, when I connect to the Airport Express Terminal cable to the WAN port (which is our wall of our home modem), you do not find the internet connection for some reason any (while Asus has no question to do).

  I'm quite desperate here. I already think to buy Airport Extreme. But I don't know if he will be able to connect to the internet for the same reason. And, it is five times more expensive. Everything else works with Asus without problems and additional parameters. iPhones, iPads, Apple TV, Android phones, Mac Pro, laptops Windows (except old 3G iPhone that says that it cannot connect to the network).

  Any ideas where to look for a solution? None of the settings in our modem Asus to allow the airport as bridge recommended? And, above all, WHY is configuring lack the ability to connect to the existing Wifi network and wants to connect via cable ONLY?

  Thank you...

  I want to my Airport Express to work as bridge, connected to the existing network and to serve as extension and receiver airplay.

  Unfortunately, function of "extend a wireless network" Apple is an exclusive feature that has been designed by Apple for only wireless "extend" the signal of another Apple wireless router.

  Or, another way of saying the same thing would be to say that, if you want to extend the wireless network, you will need two routers Apple for this purpose.

  In other words, the function 'extend' is not compatible with 3rd party routers, so the only way that you will be able to get the Express at work... or any other router from Apple, incidentally... would do what you did and plug the Express using a wired Ethernet cable connection.  If you cannot run the Ethernet cable, then you can take a look at a pair of Ethernet over Powerline (EOP) adapters to eventually send the signal on power lines the existing AC in your House.

  If you only want to use the AirPort Express for AirPlay, it might be possible for the Express to 'join' the wireless network... but the Express won't provide any additional wireless signal coverage by joining a wireless network.

• How to configure a printer without wire of Canon (MG4150) to the Airport Express

  In my living room, I have a cable modem that is configured in Bridge mode. On the first floor in a room, I installed an Airport Express station. Everything works well except my printer Canon (MG4150) does not work. What is the solution for my problem?

  This Canon printer supports wireless connectivity, should just be configured to connect to the wireless network provided by the AirPort Express. Is not the way you currently put in place?

• Can I connect a switch to my Airport Express 1st gen?

  Hi Experts,

  I was wondering if I'll be able to connect a switch 8 ports to the ethernet port on my AirPort Express?

  My current setup is the D-Link router/Modem > airport Time Capsule <> AirPort Express

  So I've matched the AirPort Express to the Capsule to expand my network.

  FYI: AirPort Express is 1st Gen model.

  Thank you.

  Tony

  If you really have a 1st version of the AirPort Express Gen (see note below *)... and you have configured to connect to the time Capsule using Wireless 'add a wireless network', then the Ethernet port is active and you can connect a switch to the Express.

  Don't forget that the Ethernet on the Express port is only 100 Mbit/s capable, so even if you could have a 1 000 Mbps or Gigabit switch, the speed will never be higher than 100 Mbit / s.

  * A 1st Gen Express is A1264 model number. Look on the side of the Express to locate the model number. Hard to see, with grey lettering on white background.

• HP LaserJet Pro P1606DN compatible w / Airport Express?

  I'm going to buy a new Mac Pro and would like to be able to print wireless to a laser printer. I like the HP LaserJet Pro P1606DN, but this isn't a printer wireless, itself.

  I understand after talking with a representative from Apple that a printer non - wireless (assuming he has the correct drivers) can be directly connected to the Airport Express Terminal via the USB port, allowing a Mac Pro with an Airport card installed for wireless printing.

  So I have two questions:

  (1) only the above mentioned HP printer has the correct drivers (or is otherwise compatible) to work with the Airport Express?

  (2) will be the configuration that I mentioned above work, assuming that the printer is compatible with the Airport Express?

  Thanks in advance for any help and suggestions!

  It should work perfectly.  Your Mac Pro is not to be connected wireless to your network to make it work, a wired connection works also (unless the Airport Express Terminal will not on your network, but rather just stand-alone).

• AirPort Express is no show in the utility AP

  Airport Express 1264 does not appear in the chart of AirPort Utility.

  I had my time airport Capsule (3rd generation) running for years.

  Buy a model 1264 1st Gen Airport Express to extend the system.

  CAT6 used to connect Express to Time Capsule but Express is a utility AirPort show

  Not connected Express directly to Mac-Mini photo express is a show.

  2 days, I played and I tried many internet configuration scenarios.

  Can you help me or would it be better to mix the 1264 and buy another Express?

  Thanks in advance,

  Mike

  AirPort Utility is based on both the mDNS (aka, Hello) and IPv6 IP protocols to find an AirPort base station.

  I suggest that you check that your Mac mini is configured for, at least, only link-local IPv6 mode. To do:

  • Run system preferences > network > select depending on how you connect your mini to the network Ethernet or Wi - Fi
  • Select Advanced
  • Configure IPv6: Link-local only
  • Click OK.
  • Click on apply.

• airplay iOS 10 with airport express

  Impossible to find airplay with Airport Express, but works well with apple tv

  some1 help me

  Same problem with my iPhone 5 and IPad Mini after upgrading to IOS 10.

  Firmware Express Airport: 7.6.7