Alignment problem page & ink cartridge

Similar Questions

• Problem - has ink cartridge but no printing appears on the paper

  I have a printer of HP Deskjet 4200 all-in-one with a relatively new ink cartridge.  The printer prints white - nothing appears on my paper.  The last time I used the printer (with the same cartridges) was four months ago, and he was fine.  To my knowledge, nothing has changed (parameters, etc.).  I can't figure out how to get the printer to print anything.  I could go out and buy new cartridges, but ones I have is barely used, although only around the age of 6 months.  And the problem seems to be both color and black print (printer has two cartridges) - so I made me think that it would not be a cartridge problem.  Any suggestions on what I might try?  Thank you.

  It is possible that the print heads have become clogged due to sitting for so long unused.  Try to run the three cycles of cleaning of the Toolbox.  If it does not recover the printhead, then place 1 "of very hot water in a cup and watch the nozzles of cartridge in hot water for about five minutes.  When it comes gently dry the printhead on a wet cloth dry contacts of the cartridge, then reinstall the cartridges in the printer, and try another cleaning cycle.

• HP Deskjet 3050: Problems installing ink cartridges

  I have a HP Deskjet 3050 all-in-in-one J610 series. I purchased & installed a black cartridge 61 and see the message on my printer: "authentic black HP print cartridge installed - ok. However, when I try to click on the button next to 'ok' nothing happens. I try by clicking New, or the one above (as in, maybe I clicked on the wrong button), and I turned my printer and turn it back on. Nothing changes. I'm unable to complete installation of ink cartridges and print anything.

  Can someone tell me what is the problem?

  Hi @TwoCharacters

  It's almost that the Ok button is not responding, or only works intermittently. You took the message of cartridge which means it must have admitted you pressed OK. What happens if you just keep trying to press OK, maybe try a little more pressure when you press it, or hold down the key longer than you should have to. Looks like it may be a hardware problem, you may consider giving us a call.

  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

  I hope this helps.

• Help! Problem with ink cartridge compatibility Photosmart C4383 in my current position

  Need your help! I bought my printer in the Middle East almost 2 years already Photosmart C4383 with ink cartridges 140 (black) & 141 (tricolor).  Since then, I have in my country now, resides in the Philippines and I always use the printer.  This week, I already have run out of ink Supply and decided to buy a.  Since then, I bought the printer in another country, I decided to check the site to ensure the compatibility of ink cartridges.  The results stated that the Photosmart C4383 belongs to the Photosmart C4380 series and it also says here that HP74 (black) & HP75 (HABs) are the compatible cartridges for the printer in my area.  Since then, I always have the tricolor ink cartridge available 141, I decided to buy only the HP74 (black) ink cartridge.  But when I place the HP74 (black) ink cartridge for my printer, I was surprised to see in the display as the ink cartridge, I bought is not compatible with the printer. I was so disappointed because if I can't use the product then I lose money and and check again and again in the sights of compatibility of ink in my area said but still the same thing as HP74 (black) is the compatible ink cartridge and also saw a result stating to "reset the printer to work in my current position."  Need your help to enlighten me and give me the right solutions to these problems and the steps how to make good sense.   I need to use my printer so badly. Thank you.

  You will need to Contact HP and require a reset of regionalization.  It will take you have access to your computer and printer so that on the phone with HP agent.  If the C4383 is a model only sold in some regions it is not possible to have the region reset.

• OfficeJet 5740 [redacted] s/n: ink cartridge problem 5740

  My 5740 is less than 6 months old. I inserted a new black cartridge 901 and a new tricolor cartridge 901 and a few printed pages.

  I now am getting an error for ink problems cartridge to remove and then reinstall, first black and now both cartridges. I reinstalled them several times and have restarted the printer twice.

  What can we do? This printer has worked quite well up to this point. Thank you.

  Hello @Mikegaand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have problems with the cartridge. I would like to help!

  I recommend you start by removing the ink cartridges and perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I would also say to following the steps found in this document:

  A 'lack of cartridges' or 'Problem of ink cartridges' Message is displayed on the control panel

  Good luck and please let me know the results of your troubleshooting operations. If this solves the problem, click on accept the Solution below, as well as others to find the answer.

  Thanks for posting on the HP Forums!

• without the Photosmart 5510 ink cartridges Control Panel cannot be accessed

  I have a Photosmart 5510 which has no ink cartridge. My intention is to use it to scan only, and I would like to be able to set up wireless. When I turn on the printer, the control panel displays this: "problem of ink cartridges.  One or more cartridges appear to be missing or damaged. Install or replace the affected cartridges. »

  The wireless button or the ePrint button cause anything to appear on the control panel and there is no other options, such as cancel or continue.

  Is there a way to go beyond this message of ink cartridges without installing cartridges?

  Hello

  In general, I'm afraid the answer is no, as a multifunction device, it requires the ink required to operate the device but there are of the workarounds you can try.

  That there is a problem with one or more of the ink cartridges should be sorted first, the control panel will not answer while the device is in an error state.

  You try to use the computer temporarily plugging in a USB port on the printer.

  If the printer is recognized by the PC in such a State, let it finish its configuration and open the software HP Photosmart 5510.

  Open the utilities tab and click on Setup & software printer, then click on convert USB to wireless and follow the steps on your PC.

  If this success then run a scan of your PC use.

  If it is not detected, which is likely to be affected by the error status of the device, such you will solve the problem first.

  You can follow these steps to solve a problem of cartridge if necessary:

  http://support.HP.com/us-en/document/c02924284

  Kind regards

  Shlomi

• HP Envy7640 -: set up the ink cartridge

  Printer purchased just, throughj of work put in place and have message problem of ink cartridges.  Have reinstalled cartridges supplied with the printer and also installed two extra cartridges I bought at the time I bought the printer.  Problem of ink message will not go away I can't find OK to touch.  Help!

  Welcome to the HP community @DesertDon,

  I read your message on the error message problem of ink cartridge that shows your 7640 new desire and I wanted to answer you! I want to try the steps from the link I posted for you below to see if you can work around the error message. If the error does not clear, contact HP directly to their contact information at the bottom of my message here to replace the printer for you.

  HP ENVY 5640, 5660, 7640 and Officejet 5740, 8040 e - all-in - One Printer Series - a 'lack of cartridges' or 'Problem of ink cartridges' Message is displayed on the control panel

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  I hope this information helps you!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• HP C7280: ink cartridge access door is open

  Hello

  My HP Potosmart C7280 AIO (all-in-one) is stuck with an error message.

  Door open

  Ink cartridge access door is open.

  I have reeived a printer replacement in support of July 2008 and HP will not help because my original printer was purchased in Dec 2007.

  Google did not help

  Search HP support site did not help

  User manual did not help.

  I also tried this:

  power off

  Unplug the power cable

  Wait a minute

  Press and hold the "#" and "6" keys

  Plug in power chords

  Be patient

  Wait for the white screen out.

  Release the keys #6

  Press the button power

  ... all of this in the hope that a false alert will disappear. There NO :-(

  Experts out there?

  Is - this firmware/hardware translation?

  In the future, I'm not spending a dime more with HP unless this issue is resolved in a satisfactory manner.

  Help to get forward.

  Pete

  Message edited by prnthlp on 05/21/2009 12:27

  I also sent the email below to HP support and hoping that someone will help.

  Sent by e-mail E-mail form
  Please contact the e-mail HP support

  Thank you for sending your e-mail to the customer of Hewlett-Packard. You will receive a system generated acknowledgement [[the lapse of time, may vary by region]]. If you do not, please resubmit take extra precautions to make sure that you enter a valid and functional e-mail address.

  If you have additional information or request for information, please contact HP

  
  When did you purchase your product? : 2008

  Product HP Photosmart C7280 all-in-One Printer

  Select a problem area: error messages

  What is your serial number (SN): MY82NH43NC

  What is your operating system? : Microsoft Windows Vista Home Premium 64

  How your product is connected to your PC? USB cable
  
  If there is an error message, please specify:

  Door opening / Inc. cartridge access door is open

  Description of the problem: the ink cartridge access door is not open, but this post just won't go away! The printer is in normal state (not open) and I am ready to print. How can I get rid off the coast of this message. Help, please.

  Please provide previous steps of troubleshooting, or information that can help HP help you. :

  I tried to plug the printer in holding together the "#" and "6". In the past it has helped to solve other problems of the firmware, but this time the message "access cartridge door is open" message remains on.

  Nothing changed since the device was working properly (installation of SW, settings, wiring, etc.): Nop.

  How would you describe your level of technical skill? : Advanced

• I found the FIX for the problem of HP4500 ink cartridge!

  I had problems with my ink cartridge three colors... just like many others. After searching endlessly with no solution to the problem, I decided to take a flashlight and look inside the printer. What I found was a piece that had become crooked behind my color cartridge. It was a simple solution... I took a long thin to flat head screwdriver and pushed very GENTLY in place. I then ran a TEST PAGE and ALIGNMENT before I printed anything... it worked! Here is a picture I took before I did the setting of the insert on the left hand side, it's here that the color cartridge is going... If you notice, it appears to be crooked... he slipped easily right now in place. I've reintroduced the cartridges and closed the door. IMPORTANT * make sure that you unplug your printer before attempting to solve this problem * good luck and hope it's a permanent and not temporary solution

  Hi coolinutah,

  Thanks for the valuable information and goot to know that you were able to correct and solve the problem.

• The life of ink cartridge and print head alignment failed

  I use an Officejet Pro 8500 A910 and did not have any problems with it until I recently changed the ink two weeks ago.

  I bought HP original on Amazon UK and after four attempts to align the print head (which fails permanently), my ink for all, but the black cartridge high capacity is exhausted.

  I havn't print all pages in full color, black only for the ebay postage labels.

  Hell this printer that consume all my ink in five attempts to alignment?

  HP will reimburse me for the color ink cartridges?

  I solved the problem.

  BUY A CANON INKJET...

  It cost me less than a new set of cartridges for the HP OfficeJet

• FIX for the problems of HP4500 ink cartridge!

  I had problems with my ink cartridge three colors... just like many others. After searching endlessly with no solution to the problem, I decided to take a flashlight and look inside the printer. What I found was a piece that had become crooked behind my color cartridge. It was a simple solution... I took a long thin to flat head screwdriver and pushed very GENTLY in place. I then ran a TEST PAGE and ALIGNMENT before I printed anything... it worked! Here is a picture I took before I did the setting of the insert on the left hand side, it's here that the color cartridge is going... If you notice, it appears to be crooked... he slipped easily right now in place. I've reintroduced the cartridges and closed the door. IMPORTANT * make sure that you unplug your printer before attempting to solve this problem * good luck and hope it's a permanent and not temporary solution

  Hi coolinutah

  Thanks for the detailed post and photo

  

  Ciara

• Re: 5740 ink cartridge problem

  Same problem with HP Officejet 5742 using ink instant. Error for the last 5 days. No new HP cartridges and yet if I bought a new one and installed. This works. Pretty upset that the ink cartridges HP Instant service seems don't have not one) detect a problem b) to correct it. What's the point?

  Hi Spuggie,

  I'm sorry you have been having problems with your HP Officejet 5742 and instant ink cartridges.

  I don't know why your new HP cartridges are not arrive when you need them.

  For your questions, I recommend communicate you directly with ink HP now and see what they can do for you.

  https://instantink.hpconnected.com/us/en?jumpID=in_r11549_hpsupport_ii2_consumerinstantink_071014

  At the top of the page, you will find a number to call instant contact with ink.

  Explain your situation and see what they can do to help fix the problem!
  Jean

• HP Envy 4500: Instant ink cartridge problem

  I just registered to instant ink HP.

  All new Instant cartridges have been installed on January 28, 2015, I printed just 2 pages.

  I turned on at the time of the printer and the message on the screen says:

  

  I followed by using the line, contacted HP cat, cannot get assistance UK on phone, cleaned the contacts of the printhead as suggested on the help section of the software, removed and re inserted the cartridge approximately half a dozen times but still no joy.

  Instant ink cartridges are installed:

   

  After sending an e-mail to HP ink I asked a new cartridge.

  What is likely to happen or is there anything else I can do?

  Any help would be appreciated.

  Hi @scifijunky73

  Welcome to the Forums of HP's Support. I understand that you are having problems with one of the instant ink cartridges you have.

  My recommendation is to contact HP customer care on 0207 660 0596 (indicating your call is on the program of instant ink) Monday - Friday 08:30-18:00 (except holidays). It is best that you contact team of instant ink for your cartridge problem.

  Please let me know if you are unable to contact the team of instant ink.

• Problem with color HP ink cartridge

  Title edited for clarity>

  I have a HP j4680 printer.  I get a massage saying: [Tri-Color] ink cartridge problem refer to device documentation to troubleshoot.    I don't know what that means.  If I take the color out, the message stop cartridge and I can print in black.  If I put it back in it does not print and gives me the same message.  I really struggle with computers so any help must be step by step.  Don't assume I know that even the simplest things.  I just found out that I don't even know which category to select below.   I've seen windows and internet explorer on my screen so I guess that windows.  My son set up and I click on firefox to start.

  As error messages go, that one is pretty clear.  This means that there is a problem with the color cartridge.  For troubleshooting tips, see here--> http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01818839&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=3692888

  Assuming that this is not a newly installed color ink cartridge, and even assuming that it's a real cartridge HP of the appropriate type for your printer, start by "step 3: clean the contacts ' to the page linked above.

• Mac 0SX installed the ink cartridge; aligned; printer does not print HP Deskjet 3520

  I just installed a new ink cartridge, lined up and tried to print my point.  The paper feeds through but nothing prints.  Is

  There is something else I need to do, or something that I did I shouldn't?  Have already installed cartridges spare and never had this problem.  Thank you.

  Hi NancyWB,

  I can't wait to hear that you have questions.  This could be a problem with the hardware cartridge or unit; However it can also be related to connectivity.  You are able to print a test page for the unit itself? Please see the procedure to print a test page for the device to determine if the material is shown below.  If the test page is empty or contains flaws, click here for the action on this issue.

  To print the page of unit test:

  1. On the product control panel, press the (arrow) down to select settings and pressOK .
  2. Press the (arrow) downward to select Tools and press OK .
  3. Press the (arrow) downward to select Print Quality Report and press OK . The report prints.

  I hope this helps!