All-in-one Photosmart 309g. I can't print envelopes.

Similar Questions

• ALL-IN-ONE PHOTOSMART HP 5510 WILL NOT PRINT AFTER GO 'SLEEP' MODE

  My printer model:

  HP PHOTOSMART ALL-IN-ONE 5510 B111A

  Problem:

  Printer goes into sleep mode. After 25-30 minutes breaks the connection between the PC and the printer wireless. Beacon wireless is the same fashionable "sleep" and I see that the printer is connected to my router and there is internet connection. HP Print and Scan doctor sees the printer, but I can't wake the printer unless I restart it.

  What I've tried so far:

  I tried all the solutions offered hp.com; Reinstall driver, updating the printer software, setting static IP on the printer, static DNS servers, using HP print and Scan doctor.

  I've seen people questioned on this issue before and there is no solution. I really need help from HP!

  After days of research, the problem was finally solved! I applied the following steps below. Some steps may be unnecessary, I didn't waste my time knowing who.

  1. find your PC's DNS servers by typing ipconfig/all in CMD.
  2. assign a static IP address outside your DHCP range. For my Linksys router him between 192.168.1.100 to 192.168.1.150. So I put my static IP address as 192.168.1.20.

  To do this, click the button on your printer wireless. This will show the IP address of your printer. This type of your browser. Go/network/network address. Choose manual IP and write 192.168.1.20

  3 now come to section of the manual DNS server, and then type your DNS servers, you found before.

  4. open your HP printer program that must be installed with your driver. Utilities hit and update the IP address. Update your address with your static IP address.

  5. now go to your router settings. Find the wireless settings and change your not automatic standard 20 MHz radio band.

  6. change your standard channel to 6.

  7 find the wireless security and replace your WPA-personal security mode.

  8 disable UPnP

  9. This is the part of the KEY. Change the renewal of your key to 36000 seconds. (10 hours)

  10 go to the Windows Advanced Firewall. Enable all the disabled printer and share, entrants and outbond rules.
  I believe that the most important parts are affecting a static IP address outside your DHCP-range and change the key renewal time. I hope this works for you too

• Printer all-in-one Photosmart 7520 missing lines when printing

  The printer sometimes missing lines when printing and sometimes written trash (not English - words that can not be understood)

  Have run new diagnostic doctor software, but get a message that the printer is OK!

  Hello there Mike1945,

  Thanks for the reply!

  Then, I propose updates through Adobe and also fill out your Windows updates also.

  Adobe:

  Open Acrobat or Reader.
  Select help - search for updates. If a new update is available, it installs automatically.
  Once installed, you can restart a computer.
  Then try to print the PDF file.

  The instructions above from: PDF print troubleshoot | Acrobat, Reader

  Complete all available updates, even those in option select! - Updates to Windows Installer in Windows 7

  Let me know how it goes!

  Kind regards

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• HP C3100 All - In - One Photosmart: very old printer and drivers

  I know that probably the answer to this already, but here goes anyway. I have an old printer. HP all-in-One Photosmart C3100. He has just shot ten years old. I had some time after 2006, or at the least, it is the date indicated on the manual.  I just got a new computer to replace my computer that was about as old. I climbed up from XP to Windows 7.

  My printer, which works great, needs a driver and HP does not seem to do more. On their website, they say nothing more than ten years. I have no chance or is there anything else I can do?

  Thank you.

  Here is your support page.

  http://support.HP.com/us-en/product/HP-Photosmart-C3100-all-in-one-printer-series/1146511/drivers

  Click here to find your exact model number and check for the drivers and the software Win 7.

• Alles all-in-one Photosmart C7288: Canoe more scan on my alles all-in-one Photosmart C7288

  When I swichted above 7 window tot 10 window, I lost my ability to scan from my printer. While a 7200 inctjet

  the stil printer prints documents but I can't scan my documents more.

  I used the updated software for my printer. In the installation, the system asked for a cd

  This one, I have more someone can send me a cd or someone has another solution.

  Thank you

  Hey @SNAJ,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems with the scanning of the all-in-one Photosmart C7288 printer after upgrade to Windows 10. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, uninstall all software associated with the printer to your PC. Finally, download and install the latest drivers by clicking on this link.

  Please let me know the results after following the above. If you are able to scan, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• How or where to get them or buy the original CD for printer all-in-one Photosmart C7280

  My installation CD original for printer all-in-one Photosmart C7280 lost in the transition. Unfortunately now I have to reinstall the software, but the installation file downloaded refuses to install advanced features by asking to insert the original CD.

  Now where can you get such a CD.

  Thanks in advance.

  Shlomo [personal information]

  You can download or order a copy at this link.

• Printer all-in-one Photosmart D110: think there paper jams

  Printer all-in-one Photosmart D110: think there most of the time paper jams (the computer print or copy).  This happened for some time.  Sometimes it will print and then at other times, it will produce jam messages when there is not a jam.  I tried all the solutions of HP.

  There is a document to help walk a (real or fake) paper jam errors troubleshooting in the photosmart D110. This document can be found here.

  So I'll send more information via the Inbox of (private) messages.

• All-in-one Photosmart C310a: problem printing photosmart all-in-one C310a black ink

  Printer all-in-one Photosmart C310 just quit printing black ink cartridge.  I followed all the suggestions on help/support pages, including cleaning the contacts on the cartridge and print head (I do not soak the print head); making sure that nothing has been blocked; Unplug the printer for the moment came and reset; put in a new ink cartridge (the printer when it stopped printing in black, was still full of 1/3 to 1/2, according to the levels shown on the printer).

  It prints than a very altered, unreadable copy.

  I had this same problem about a year ago and find a solution on this web site, but cannot find anything about it now except for cleaning the heads, reset or to install a new cartridge.

  I tried to access this particular response from my old e-mail, but it is not related to whatever it is that has tackled the problem last year.  I desperately need this printer going again, please help.

  Thanks for CAhpUSER respondent

  I didn't really picture for help, but I will do my best to clarify what I can! This document 'Print head problem' or "Print head seems to be missing or corrupt" Message appears on the computer is some visuals that will make things clear with my explanation below!

  The part you are diving into the water is the ink nozzles. When the instructions say do not touch the ink nozzles, that means with the fingers/hands. It says to make sure that you use a fluffy towel/no paper to wipe the print head, so don't put fats from your contact with her skin. The electrical contacts are the part of the print faces head that looks like the back of the printer, just in some places grouped copper.

  I hope this helps clear things upwards a bit for you

• HP All in One Photosmart C7280 scan issue with Snow Leopard

  Hello

  I bought my wife a new cool Mac mini. So it comes with Snow Leopard. We use it for our activities with an HP printer all in one Photosmart C7280. Unfortunately the scanner does not work. I did the mistack to install HP driver from the HP website and read after documentation of the HP Web site (probably like all users). So I decided to completely re-installed the machine (as it was new) and follow the installation procedure for HP who, to say that the pilot is coming up with Snow Leopard. After the new re - install, so I installed 10.6.1 patches and last HP driver from the site Web Apple as mentioned in the forum. (version 2.2)

  The printer is correctly detected, but there is no way mak it work the scanner on HP procedures. The scanner is not recognized at all, and the printer configuration window is not appearing the scanning tab as it is supposed to. It seems that the scan part it does not work in one.

  We love HP printer and it will be great to see it fixed.

  My network configuration is very simple:

  -192.168.0.176 is the IP address of the HP printer with 255.255.255.0 netmask

  -192.168.0.106 is the MacMini (3.1) IP address mask subnet even

  All connected using a router D-Link (5 ports).

  Printer/scan function works perfectly on our other Mac systems that are under Leopard. I tried to install Leopard on the new mac mini, but the installation DVD that we have (10.5.4) does not start successfully on the machine. We are so stuck.

  Any help really appreciated

  Jean-Marie

  Hello

  Good news, it worked. But I think that the problem came from the D-Link router that I used. Upnp has been set to allow, and it seems he mistook the discovery of the device. I proceed to turn off and the live showed you me overdrawn the printer on the network. I installed it, and the scanner has been recognized.

  If I turned my back to Activate Upnp, the scan function is dead. Thus, it probably is a problem of compatibility between the leopard to snow and this Protocol. What is strange, is that our whole system of leopard work with upnp enable or disable.

  Anyway thanks a lot for your help!

• I scanned the two elements of a brother MFC - 240 c printer all-in-one to computer. where can I find documents

  I scanned the two elements of a brother MFC - 240 c printer all-in-one to computer. where can I find documents

  Hello MichelleOZ,

  Items scanned by scanner are stored as Images (usually from the MPEG files) so I would look in the pictures folder. Otherwise if you remember what you call the files when you saved them you could also search for them via Windows Explorer.

  File photo:

  1. open Windows Explorer

  2. look in the folder list on the left side of the Windows Explorer window

  3. Locate the folder of photos

  Search:

  1. open Windows Explorer

  2. place your mouse cursor inside the Windows Explorer search box (upper right side of the Windows Explorer window), and then type the name of the file that you want to search

  3. Windows will now search for the file.

  4. once found, click on the file to open it.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Could you give me a price list of the HP all in one printers we have to buy printer all-in-one?

  Could you give me a price list of the HP all in one printers we have to buy printer all-in-one?

  @ mehtaintertrade - site HP home and home office can help too. It can show you the price you can pay online and see the you the specifications of different printers and the features that are available so that you can compare them and get an idea of what all-in-one printer is right for you and will be able to better meet your needs. I put this link to open the Printers page where it shows a Photosmart and an Officejet all-in-one that are among the Favorites of customers. You can click on see details and which brings to the page for the printer and look at an overview, specifications and comments for the printer. This might be able to help make a decision that you are comfortable with. I hope this helps.

• Series HP Photosmart Wireless e-All-in-One B110. I can't install the driver and software

  Hello

  I formatted my computer and reinstall windows 7 64 bit, I reinstalled many software (windows office and so on...), but I can't not reinstalled driver software for my printer Hp Photosmart Wireless e-All-in-One B110 series. When I insert the original cd of HP at the start of the installation but after 1 minute is displayed error

  

  I downloaded the dirver software from HP Web site, I tried to install it, but pops up the same error

  What can I do?

  Thank you

  Hi banzafa,

  I see that you get a runtime error when trying to install your software, and you have recently reinstalled WIndows 7 64 on your PC. Please follow the steps below and let me know the result;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose Save as, save to desktop > PS_AIO_07_B110_USW_Full_Win_enu_140_126.exe
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have an non HP computer run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• HP Photosmart all-in-One D110a: Solution Center says disconnected printer, can still print documents, but cannot scan

  No problems before the upgrade windows 10. Solution Center says offline wireless printer but I can still print it. Works on windows 7 without any problem for years, has been working for 9/2015 when I upgraded to W10 and the uninstall update KB3132372. Stopped working today. Cannot scan, but the network is in place. Rebooted everything several times. No recent upgrades or software changes.

  Hi @mikealpha,

  Because there was a registry error in your installation, you will need to uninstall and reinstall the printer software. Below, I've posted some links to documents that offer instructions on how to uninstall, and then reinstall the HP software. Please try all the steps in order and get back to me with the results.

  HP printers - uninstalling the software of the printer (Windows)

  HP printers - Download and install the printer driver and software Via USB

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• All-in-one Photosmart HP 6525: HP Photosmart 6525 stopped properly print in black

  Happy Friday! I had a problem the last two weeks with my printer. I usually use the printer on a daily basis for school. I got the impression during 1 1/2 to 2 years and have not had a problem until now.

  Here is a list of what I've tried so far:

  • Aligned the printer
  • Clean print heads
  • Restored by default
  • Erased the vents on the ink cartridges
  • Clean the screens between the printer and the cartridge

  I did all the steps that I could find for troubleshooting on the internet. Is there something else I can do?

  Hello @chawna,

  Welcome to the Forums of HP Support!

  I understand that you are not able to print black ink of your HP Photosmart 6525 e-all-in-one printer. Thank you for all the troubleshooting steps you have already finished before reaching out for support.

  Unfortunately, at this stage, because you have already completed, troubleshooting steps listed here, the next step would be a hardware replacement as system within your camera HP Photosmart print head is defective. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head is defective in your printer printing system is defective. On this model printer, printhead system is a non-replaceable element.

  I highly recommend to go to the Technical Support queue by phone in order to explore the additional hardware options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  When you talk with the phone support agent, please notify them of all the troubleshooting steps you have completed and the results of these measures.

  I wish you good luck going forward with this!