All-in - one PX30t - No.-Qosmio display or the mouse pointer

Similar Questions

• print allignment page all-in-one HP PSC 2400 turns off the printer features

  After changing the ink, trys to printer to run printerr allignment.  It feeds the paper to halfway through, then hangs up with all the flashing lights.  I can use the printer on the computer, but the lights blinking and I can not copy or scan using the controls on the printer, my son found a solution a bit backward, but we didn't copy it down. Any help is appreciated.

  After changing the ink, trys to printer to run printerr allignment.  It feeds the paper to halfway through, then hangs up with all the flashing lights.  I can use the printer on the computer, but the lights blinking and I can not copy or scan using the controls on the printer, my son found a solution a bit backward, but we didn't copy it down. Any help is appreciated.

  Hello

  You can get a faster solution on the Support Forums of HP printer.

  Here is a link for your convenience.

  Printers and all-in-one - HP Support Forum's:
  http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet

  Select the appropriate forum for your device.

  Concerning

• SMART PHOTO ALL-IN-ONE C-4385: can not find the download of the printer software.

  I need to uninstall and reinstall the complete software for a Photo Smart C-4385 all-in-One. I searched everywhere on the HP site and Googled it and still can not find it. Can someone help me with this? My OS is Windows Vista Home Premium 32-bit. Thank you.

  Hello

  Here's a direct link for the full software features for your printer:

  http://ftp.HP.com/pub/softlib/software10/COL20274/MP-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe

  Kind regards

  Shlomi

• When I click on START / all PROGRAMS /, most programs do not display on the screen.

  I had a problem with a virus. Used Microsoft security programs to remove it. However, when I click on START / all PROGRAMS /, most programs do not display on the screen. Any ideas on how to solve this problem?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 2:
  Create a new user account and check if it helps:
  http://support.Microsoft.com/kb/279783

  It will be useful.

• j ' have an asus x93s it does not read my dell AIO 926 photo printer all-in-one. I HAVE BEAUTIFUL DOWNLOAD THE DRIVER.CA DOES NOT WORK!

  j ' have an asus x93s it does not read my dell AIO 926 photo printer all-in-one. I HAVE BEAUTIFUL DOWNLOAD THE DRIVER.CA DOES NOT WORK!

  Microsoft answers site provides support in English. The following Uniform Resource Locator (URL) will be low - you receive information appropriate for your set up support. Open the link and get your region from the drop-down list, and then click the arrow to continue.

  http://answers.Microsoft.com/fr-FR

• Prospective Golf Sports simulation mode full-screen on one monitor, but when it runs the mouse would not return to the other monitor.

  original title: two monitors, mouse stuck
  I'm under Simulation of Golf Sports prospective mode full-screen on one monitor, but when it runs the mouse will not return to the other monitor. It seems that the mouse is not bound by the program, but I want to be able to use another application on the other monitor. Any suggestions?

  Hello

   
  What operating system is installed on the computer?
   
  Method 1: You can press the Windows key on the keyboard that appears in the start window and your mouse will automatically gets shifted to the main monitor.
   
  Method 2:
  (a) click Start, type change the mouse settings.
  (b) go to the pointer Options tab of
  (c) uncheck Display pointer trails
  (d) click apply and OK.
   
  Method 3: See if he has all the parameters of the Simulation of Golf to release the mouse button.
   
  If the methods above do not help, you can contact the Golf Simulation for additional help.
   

• The mouse pointer is not displayed in Windows 8.

  original title: 8 the mouse pointer disappears NOT associated with the applications screen

  Windows 8 64-bit running on TORDRE of Lenovo tablet 3347CTO with external monitors.

  Sometimes, the mouse pointer disappears from the office.  He is always there, because I can find it by pressing CTRL (I have "use CTRL to locate mice" clicked to fix somewhere).  It will activate a program if the invisible pointer is on the icon for this program.  It reappears when you move, but only when moving.  I'm going behind the screen applications (starting) to do this. As I know it has nothing to do with any specific program.  Only way to recover is to restart the computer.  It's extremely annoying, any suggestions would be most appreciated.

  I fell right on the problem.

  Use the Windows key + P to pass between the double screen and return to the single screen mode and returns the pointer.

  Play with the mouse settings did not help.  I think it's a problem of display driver.

  Hope this helps others.

• Is it possible a 0 is displayed after the decimal point when the value is rounded? (I get: 20-20, 1;) "I need 20, 0-20, 1).

  Using the effect of text "cursor", I am able to view replace "30 ° C" "35.5 ° C". My question is: is it possible a 0 is displayed after the decimal point when the value is rounded? (I get: 20-20, 1;) "I need 20, 0-20, 1). I use this code:

  Temp = effect ("Slider Control") ("Slider");

  sliderValue = Math.round(temp*10)/10;

  [sliderValue + ' ° C ' "']

  Here is the solution:

  numDecimals = 1;

  Temp = effect ("Slider Control") ("Slider");

  sliderValue = (Math.round(temp*10)/10).toFixed(numDecimals);

  sliderValue + "° C";

• HP omni 200 all-in-one: hp omni 200 display brightness and contrast

  I'm trying to adjust my brightness of the screen to the bottom... I already tried the right buttons... All that I can do?  I need

  for the low average display brightness to match printable photo of my laboratory.  Also is it possible to change the contrast?

  I checked online a little and can't see any other information. on this...

  Thank you...

  other than this issue p.s., I was very happy with this system!

  Sharon

  I think that you are good to go now on what I believe that it will keep the setting that you created.

  I don't know if CCC has an option to save these settings. He can just leave them until you change it again.

  Shut down the computer then turn it back on again, then check the settings to make sure.

  Note that if you ever update the ATI driver or update the software of the CCC, you may lose these settings.

  I'd write them down to safety on a case where you need to refer to them.

  If you use a calibrator as a Spyder (for example), you want to leave the CCC at default settings first, calibrate with the screen reader, then adjust CCC after for tweaking final with the brightness and contrast.

  To those who don't have not one built in graphics port. If you decide to extend your display Omni with a 2nd monitor, you can use a graphic like this USB card adapter. If you do, an external monitor is better than the built-in screen year only elon on what you buy. Amazon.com: StarTech USB to VGA video output Also, if you have a 2nd monitor already setup and the built in screen dies (All in One are known for this) the 2nd monitor will generally continue to work and you can always access the computer easily. Cannot override the built-in screen.

  So, as you already know, do not rely on your photos being stored only on the hard drive of the Omni. Use external backups.

  If my advice was useful, please indicate the appropriate post as solved.

  Thank you.

• Officejet 6310 all-in-One: can't send faxes from the computer screen

  We use an Officejet 6310 all-in-one printer. Computer of my wife, a laptop Toshiba Satellite Windows 7 Professional, has suddenly come to the point that it will no longer send faxes from the computer screen. We get an error message that something must be installed or reinstalled. We have lost the CD of the software provided with the printer. We can send a fax if we have a document printed to power the machine, and we can print faxes. We lose a lot of paper and ink because of this problem. Help, please.

  Hi GregsterMc,

  Given that the Fax icon is not displayed in the window of printers and devices, you need to uninstall and reinstall the software again. This should solve the problem.

  Thank you.

• 4500 all-in-one suddenly it will print on the internet.

  I have a 4500 all-in-one who all of a sudden do not print on the internet. Except for the page number at the top and down the name of the site. It will display the word documents and pages of e-mail. My system is win7 64 b. printer is about two years old.

  I am running ex9. But is not serious, I ran PC cleaner and that solved the problem.

• Pavilion all-in-one Q214 23: factory restore on the new HP Pavilion all in one computer

  I have a week 6 old Pavilion Desktop all-in-one.  I wanted to do a factory install on it because I had a lot of extra things that I don't want anymore, I installed and I thought what a factory restore would be better.  I went to the HP Recovery Manager and no where in the choices he said 'factory restore '.  He used to have this option in the HP recovery environment.  I checked all the options and nothing on the factory restore.  I made a set of recovery discs, but I always remember that HP still had the opportunity to do a factory restore.  I have tried F11 and F8 and no luck.

  Answers or suggestions will be greatly appreciated.

  Hello

  Thanks for posting in the HP Support forum. Welcome!

  According to the model of the computer, it can not be called exactly the HP system recovery but if your computer is originally shipped with Windows preinstalled 10, recovery partition must be present.

  S ' Please, first manually copy your imporant most of the data on an external partition

  -Follow these instructions here to open the collection from inside Windows

  > > http://www.tenforums.com/tutorials/4130-reset-windows-10-a.html

  > > http://www.tenforums.com/tutorials/4130-reset-windows-10-a.html#option2

  'S called it Reset - Windows Reset with options to RESET the machine as long as the plant (remove all), with an option to "freshen up" Windows and keep personal files.

  Let me know how it goes and if it works for you.

• HP 7210 all in one - will not be printed on the fast project configuration

  For the last two weeks, my 7210 HP all-in-one has decided that he does not want to print on quick project more.  I have the default settings of the printer on quick project, and I even went and edited individual documents to ensure that they are on the quick project, but it still prints on quality.  I do a ton of printing on a daily basis, and that is to kill my ink, not to mention how long it takes.  My OS is Windows 7, 64-bit.

  Hey @kmh1883,

  Thanks for getting back to me on this subject "fast draft" with your HP Officejet 7210 all-in - One Printer. Even if printing HP and doctor Scan found no problem, it seems that you may have a driver conflict. I would like to try another driver at the moment to see if this clears up your printing problems.

  How to add another driver:

  1. Click on the Start menu
  2. Select the devices and printers
  3. In the devices and printers folder right click on your HP Officejet 7210 and left-click on properties of the printer
  4. Left click on the Advanced tab
  5. Left-click on new driver
  6. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
  7. Select HP as the manufacturer on the left
  8. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  9. After selecting Deskjet 9800 hit next complete the new driver Wizard
  10. Under the printer properties window, select 'Apply' but do not hit OK
  11. Select the general tab
  12. Rename your printer in HP Officejet 7210
  13. Click OK
  14. Finally, right click on your HP Officejet 7210 one more time and left-click on Printing Preferences
  15. Left click on the paper/quality tab
  16. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its project of Fast
  17. Press apply and OK

  Test print from the print driver Deskjet 9800 replacing to check if the setting "Fast Draft" remains.

  Please let me know if this solved your problem. Good luck!

• HP F380 All In One printer and, recently, I loaded the HP PhotoSmart Prime, Dungeon messages Align

  Windows XP SP3

  HP F380 printer all in one

  Center solutions HP, HP Photosmart, HP Photosmart Express and HP Document Viewer.

  I installed a new color cartridge and later added a new black ink cartridge.

  A message from HP to align the cartridges and I have already lined up both times, but continue to get messages

  popping up all the time when the printer is turned on.

  Please help me to remove the messages to align!

  Try to clean the print head and cartridges and see if that helps.

• All-in-one HP Deskjet 2540: delete at the request of print job on a deskjet printer MAC OS 2540 x 10.9

  How can I delete a regular print job to a 2540 MAC OSX 10.9 deskjet printer.  I can pause, but may not know how to remove it completely.

  Hello @annetrumbo,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with removal of a print job in the print queue for your all-in-one printer of HP Deskjet 2540 on your computer Mac OS X 10.9. Can I please you follow the steps below.

  1. click on the Apple icon in the upper left corner of your computer screen

  2. click on System Preferences

  3. click on Print & Scan

  4. click on printer Deskjet on the left to highlight

  5. click on Open Print Queue on the right side

  

  6. in the print queue window, click the print job you want to delete. Then click on Remove in the top left corner. Once the print queue window is clear, you will have a nice clean slate for your printer.

  Please let me know if this procedure works for you. Good luck!