an I can cushion of wireless photosmart 5510?

Similar Questions

• Abandonment wireless Photosmart 5510 [A 7708, 4].

  We are runningtwo iMac (intel) OSX 10.7.3.  We bought the printer from the Apple store as a package with the Macs and have had nothing more than boredom with him.  Our Macs are ethernet wired to our BT home hub but the wireless printer.  HP recommended support that we define our address of the printer. We did this but its keeps abandon the connection and count us are reduced to the machine andf run to ten before turning on, when, sometimes, it works.  She also continues to send only our computers false and incorrect ink status alerts that are not easily erasable from desktop. We are about to take the thing to the Apple store as unfit at the end unless someone can help you sort through the problem. Can buy us a USB printer and forget 'Wireless '.

  Yes, we have been in contact with many Internet service providers like BT, they see not their router is the problem.  HP printers are tested with standard routers wireless industry (according to Wifi Alliance protocols).  Many ISP routers do not respect this (probably because it costs extra money).

  So if you want to give this a go, let's define an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers in the IP address of the printer (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.
  
  After that, you will have to redo 'Add printer' using the new IP address.

• Can not print wireless Photosmart B110a MacBook Pro after switching to optical fiber.

  I am currently using OS X 10.7.5. After the installation of optical fibres, using Huawei HG863 I can no longer print wireless from my MBP, iPhone and iPad.

  I downloaded the HP v2.12 for OS X printer drivers and reset the settings of the printer, as recommended here and now my iDevices can not detect the printer at all. The printer works fine with other computers in the office.

  Have you contacted both the provider network and Huawei support people, but both were unable to detect the problem. This could be a compatibility issue?

  Hello

  All Appl edevices uses Apple Hello to communicate with the device through the netwrok, it seems that the router is not compatible Hello or do not have the protocol enabled by default.

  You can work around this requirement by adding the pritner using Jetdirect, but it will only provide the functionality of the printer, Hello support is necessary to allow the scanning of your Mac.

  To add the printer using a Jetdirect enter printing & scanning, click Plus the sign and enter the IP tab.

  Set the Protocol as HP Jetdirect-Socket and type the IP address pritner.

  The IP address can be located by entering the parameters from the front panel of the printer, and then enter the wireless settings.

  For the router, don't forget to check its compatibility Hello, amy also be appointed as multicast or mDNS.

  Hope that helps,

  Shlomi

• Can not scan wireless Photosmart Premium C410A

  My C410A runs well wireless for all functions except scanning. It will not respond to a command to scan wireless. Support long sessions with HP and Microsoft Netgear (mfr-router) have failed to identify the source of effective workaround of prob. has been to use the USB connection for the scan only function. Everyone knows the inability even to scan wireless?

  Problem solved after three hours on the phone with HP technicians yesterday and today. Bottom line: the signal from my router Netgear Wireless-G (WGR614v10) is not enough to support stable wireless scanning, and therefore the permanent solution is to scan to my HP C410A only via the USB connection. A secondary issue was my inability to scan from my second printer, a HP all-in-one Photosmart 3210. Technology concluded that, because of the presence of the solution Center for the C410A, the scan of 3210's function, which depends on a previous Solution Center version much (v7), could not coexist on the same computer. So, the solution to this issue is simply to use the 3210 for everything except scanning.

  Thanks for your efforts. Detective Conan.

• Photosmart 5510 - wireless Mac - printer offline

  Hi there, I am trying to print from a Mac again photosmart 5510, wireless is connected, tested printing via an ipad - runs like a dream.  Unable to print message error "printer is off-line" laptop (Mac 10.7.2), the printer is not connected.  Printed with a cable but I can't via wifi. Have checked all troubleshooting tips, no luck.  advice is appreciated

  Download and install this: http://support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• How can I connect my Photosmart HP 5510 with my cursor Asus got Tablet?

  How can I connect my Photosmart HP 5510 with my cursor Asus got Tablet?

  The Tablet uses Android 3.2 and I downloaded HP ePrint home & Biz. Also had a pincode and used it.

  The Tablet still shows "printer not found." I have to do something on the printer?

  The printer is connected to a wireless router?  What router?  You've restarted the router?

  You have enabled Web Services from the front of the printer?

• Wireless Photosmart HP 5510 printer

  I have a laptop Toshiba Satellite with Windows 7 and a wireless HP Photosmart 5510 printer.  It has everything set up in the store where I bought it, but I can't get a document to print from the laptop.  I did a diagnostic check, but she returns as all connected, but I still can't print.  I think I'm something wrong or missing something.  Any ideas, anyone please?

  Contact HP.

• Have 2 Photosmart 5510-e printers in different homes. How can we install in our computers as well?

  Have 2 Photosmart 5510-e printers in different homes. How can we my husband and I install two printers in our computers, so we can print on Photosmart 5510 - 1 in a home and Photosmart 5510 - 2 in the other. We have installed a printer to the computer of my husband and the other in mine, but impossible to install two printers in a computer.

  Hi, just so I'm clear of I'll try and clarify that I think that is that you are trying to do.

  You have 1 computer and 1 1 printer in the House

  You have 2 computers and 2 2 printer in the House

  You want to be able to print the home computer/printer at home 2-1 and vice versa.

  Can I declare the above?

  If so, there is a way to print on a printer from two places without having to install two printers on both computers. It's the ePrint Service whereby you can print emails and attachments to an ePrint printer by sending your message with attachments to the e-mail address of unique printers.

  Have you enabled Web Services and obtained two unique codes printers (which doubles as their respective addresses with the suffix @hpeprint.com)?

  Otherwise here is a useful link with information on how to HP ePrint help & tips

  I hope this helps you with your problem, but if not let me know and I'll do my best to help

• Photosmart 5510: Fill pdf form text only, not print boxes on my Photosmart 5510. How can I include boxes?

  I have downloaded a form of federal Government to fill, typed all the required information in the text boxes, presented in preview the document in the preview application Mac - no problem and print to my HP Photosmart 5510 all-in-one. The output text was fine, but no text box printed. The instructions accompanying the form indicates that the printed application must match the shape exactly that they will treat. The menu for the 5510 doen't show a print or documents and markup box dialog box to check. Any suggestions?

  I decided that the problem was not the printer but the program Apple prediction so I used the laptop HP from my wife to complete the form to fill out and print exactly as it is laid out on the screen. I constantly printing problems between my Mac and the HP printer so I now default to a PC for printing purposes.

• HP Photosmart 5510 'Printer offline' show

  To the right,.
  
  I started having a problem with my HP Photosmart 5510 - running on a Mac OS x 10.6.8 computer wirelessy.
  
  Until yesterday, I was able to print wireless towards her, even when he was asleep he wakes up and print.
  
  Now, however, I get a "Printer offline" message whenever I try to print what he's awake or not and I have to turn on the printer and on again before it prints.
  
  My printer HP utility can see the printer and it is connected to my network.
  
  Any help would be appreciated,
  Thank you
  Ronan

  I found this on the Apache site:

  "You unexpectedly see an Apache HTTP Server installation page when you visit a Web site. If you sent us mail because you have seen a page saying "it worked!" (or something similar indicating that Apache has been installed) on your screen or a Web site you have visited, please go back and READ the page. It must also specify what happens. The page is the equivalent of a demo or the Readme file from a Windows installation of the application; It is intended for the person who has installed the software and is supposed to show that the installation has been completed successfully. The problem you are experiencing has nothing to do with us, and we cannot help you. You must contact the webmaster of the site. If the site is www.foo.com, for example, try to send mail to . If it is www.toddsbeer.org, send an email to . And so on. »

  I think that there is something funny, with (probably your DNS of ISP) your router's DNS settings.  You can enter the configuration of the router and change the google DNS or OpenDNS DNS?

• This issue is still pending. My PhotoSmart 5510 continues to go offline during the generation of printed documents.

  I have a PhotoSmart 5510 and a Toshiba i7 Quad 4 laptop running Windows7 with a Trendnet Wireless router.

  My PhotoSmart 5510 disconnects when printing is generated.    All systems are go: online wirelessly connected wireless, does not not offline, set as the default printer, checkmark, etc..  Sometimes it will make an impression and disconnect and sometimes it will disconnect the first time and will not be printed.

  If I run the diagnostic utility I can usually get it online.  But the said diagnostic utility it is disconnected and the problem is not "resolved".

  It also has a problem with the USB.  If I've set up as a USB printer will crash the entire operating system and laptop computer will not restart unless the USB is disconnected or if the printer is turned off.  This does not happen with my laptop computer on the same Lexmark printer.

  obewan,

  This article should help to keep the Wi - Fi connection (including things like setting a static IP address for your printer to avoid the crash between you OS/router/printer):
  http://support.HP.com/us-en/document/c02817031

  Give the steps described a try and tell us if it helps.

  Good luck!

• without the Photosmart 5510 ink cartridges Control Panel cannot be accessed

  I have a Photosmart 5510 which has no ink cartridge. My intention is to use it to scan only, and I would like to be able to set up wireless. When I turn on the printer, the control panel displays this: "problem of ink cartridges.  One or more cartridges appear to be missing or damaged. Install or replace the affected cartridges. »

  The wireless button or the ePrint button cause anything to appear on the control panel and there is no other options, such as cancel or continue.

  Is there a way to go beyond this message of ink cartridges without installing cartridges?

  Hello

  In general, I'm afraid the answer is no, as a multifunction device, it requires the ink required to operate the device but there are of the workarounds you can try.

  That there is a problem with one or more of the ink cartridges should be sorted first, the control panel will not answer while the device is in an error state.

  You try to use the computer temporarily plugging in a USB port on the printer.

  If the printer is recognized by the PC in such a State, let it finish its configuration and open the software HP Photosmart 5510.

  Open the utilities tab and click on Setup & software printer, then click on convert USB to wireless and follow the steps on your PC.

  If this success then run a scan of your PC use.

  If it is not detected, which is likely to be affected by the error status of the device, such you will solve the problem first.

  You can follow these steps to solve a problem of cartridge if necessary:

  http://support.HP.com/us-en/document/c02924284

  Kind regards

  Shlomi

• hp photosmart 5510 series: photosmart hp 5510 series files are not found

  Hello

  I use the Hp Photosmart 5510 series printer and is faced with a problem where I can not scan from the printer to the laptop. Before having this problem, I used to scan from the printer wireless without any problems, but after I changed my Internet brand and speed, the printer keeps saying "to ensure that the printer software is installed on your computer and this 'scan to computer' is activated via the printer software" even if I have already connected the printer again internet. I have the printer software on my laptop, but it does not work. When I try to click on scan of the computer, the computer used to say "files series hp photosmart 5510 are not found". I tried to change the IP address, but that didn't work either. So I don't know what to do now. Also, I tried to use the USB cable and it worked, who showed me on the printer, I can scan wirelessly or via USB. When I tried with the USB key attached to the laptop, wireless the wireless worked (as well as the USB port), but when I took off the USB cable, it did not work. Help, please

  Note:-J' formatted the laptop and operating system went from vista (original) to the Ultimate, which helped to improve the performance of the laptop. -What is has everything about the problem?

  Welcome to the HP community @Blizzerd,

  I wanted to answer your question to have the printer connect and work on your network wireless 'new '. I think that if you uninstall the printer and reinstall the printer software and continue through to set up the printer on your network, it should work for you.

  Here are the steps for you.

  1 uninstall the printer software, and then restart your PC.

  2. click on this link, select Windows 7 and follow all the steps to install and reconnect the printer: HP Photosmart 5510 and 7510 printers - setting upwards to a wireless network

  Test print and scan and let me know what happens! I hope that does the trick

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!

• Server connection error:-1 there is a problem connecting to the server... hp photosmart 5510

  HP photosmart 5510 e - while a printer B111a

  Windows vista 32-bit

  connection error message-Server error:-1 there was a problem connecting to the server, press Retry or ok to continue

  No changes have been made to my operating system

  Try to add new applications with eprint center of my Compaq Presario CQ60 laptop to my HP printer. Computer tells me that the new applications are there and ready to use, but printer says 'server connection error "? I followed all the instructions to connect to the wireless router, but I'm not sure how to connect to the "Server"?

  The steps below a usually resolve the problem you are experiencing:

  1. unplug the power cord at the back of the printer.

  2. unplug the power cord at the back of your router (and the modem, if they are separated from the router).

  3. wait 20 seconds, then plug the router (and the modem, if necessary) in.

  4. wait for 30 seconds, then plug the printer back and power.

  5. press the button on the front of the printer ePrint, and it should try to connect to Web Services again.

  These steps usually fix the problem, but if it persists, you can try definition of network information static for the printer (which is sometimes useful to stabilize the ability of the printer to get outside of your network to the internet):

  1. tap the wireless at the top of the screen of the printer and note the IP address.
   
  2. Enter the IP address in the address bar of a web browser on a computer and press on enter or click the go button browser.
   
  3. the printer status page must be open.  Click network in the upper part.
   
  4. click on networking on the left.
   
  5. Select the Proxy settings.
  Note: If you are prompted for a redirect, click OK.  If you receive a certificate warning, select the option that allows you to continue anyway.
  If you receive an internal system error, refresh the page until it loads the proxy settings.
   
  6. check that all fields are empty.  If they are not, make them disappear and make sure that the Proxy Server requires authentication is unchecked and click on apply.  You should get a success message.
   
  7. click on the network address (IP) on the left.
  Note: If you only configuring IP address and DNS address with a yellow note Configuration, refresh the page until it loads completely.
   
  8. leave automatic IP IP address Configuration.
   
  9 change the DNS address to the manual DNS Server Configuration.
   
  10. enter manual for the manual preferred DNS Server 8.8.8.8 and 8.8.4.4 for auxiliary DNS.
   
  11. click Apply and you should get a success message.
   
  12. turn off the printer for 30 seconds and then turn it on again to force the new settings take effect.

  Let me know if you have any additional questions. Thank you!

• Not able to scan from the printer to my computer control panel using the HP Photosmart 5510

  Hello

  I recently bought the new HP Photosmart 5510 all in one - and I am not able to scan from my printer to my computer.

  I am however able to scan by launching the scan of the computer. I talked to HP customer earlier this evening and we ran printing + scan doctor and can't find any problems.

  I am running Windows 7-64 bit and that you have installed my wireless printer using the Installation CD supplied with the printer today.

  I could not finish troubleshooting with the technician that I talked to because I had to go to work. The person that I spoke with proposed possibly the full functionality of software downloaded from the hp.com site, which I'm happy to do, but I think that it is useless, because I have the CD of installation here. (The rep that I talked to was very nice, but I prefer not to have to uninstall and reinstall if it is not necessary)

  Because as I mentioned above, everything works perfectly and I am able to scan - but not directly from the printer itself.

  When I try to scan from my printer to my computer an error message appears on the control panel of the printer indicating that: there is no scan destination options of analysis chosen / no..

  However, I can't find anywhere with my HP software where I could add / make sure that the destinations were there. (As I could on my other printers. (IE. By the solution Center)

  This printer does not appear to be a solution center that I could find and the scanner installed with the CD icon doesn't give me any options regarding changing the settings of the parser

  I wonder:

  1. the Hp Photosmart 5510 does not have the capacity to scan from the printer control panel?

  2 OR the CD installation provided with my printer only has the base drivers as the agent of tech support suggested? Which means to scan from my printer I need to download drivers for your hp Web site?

  3. or is the problem because of something else entirely?

  Thanks for your help!

  HI Dublin,

  Follow the steps below to uninstall and reinstall the printer.

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall the Photosmart 6510 in the list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the drivers and full software functionality, and then reinstall the printer.

  Version 28.8