Another accident blue screen, I can't fix

Similar Questions

• What are the repeated cases of blue screens? Can I fix?

  Pavilion P7-1036 Windows 7 64 Bit blue screens several times, almost every day since PC was bought and brought back.

  Error message: blue screen with "Windows has detected... and stop protecting your computer... If it's the first time... etc, etc, then long lines of 0 F x too long to copy down.»  Hours spent on the phone with HP support.

  Hello

  Have you tried a full restore of HP?  Backup your data on external media before that.  After the full restore, don't let the Microsoft automatic update process not apply the updates until you can determine if your PC is stable. There might be a bad update from Ms.

• My pinball 3d crashes when I go to full screen - how can I fix

  My pinball 3d crashes when I go to full screen - how can I fix

  Hi Dave,.

  I suggest you to follow the steps and check if it helps.

  Method 1: Perform a clean boot, and then check if it helps.

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure you perform the steps in How to configure Windows to use a Normal startup state to start your computer normally.

  Method 2: Update video card driver and check if it helps.

  How to manage devices in Windows XP

  Note: Read the sections update or change a device driver from the link above to update the driver.

  Method 3: In addition, you can also run Microsoft Fix - it from the link to fix the problem with Direct X.

  Diagnose and automatically fix problems with Windows games

• I have a blue screen I can't start and I don't have a boot disk I can't start in safe or any type of mode

  I have a blue screen I can't start and I don't have a boot disk I can't start in safe or any type of mode

  ccorr,
  Thanks for posting on the Microsoft answers Forum.  You will need to provide additional information.

  What version of Windows and service pack level are you?
  Do you get any error messages?
  If something has changed on your system prior to this issue (hardware or software)?
  What "Startup disk" do you have?  It is the manufacturer of PC?

  Here are a few things to try:
  The first thing to do is to boot your system and start pressing F8 as soon as it starts booting.  You will get the Windows startup options screen.  Select "Disable automatic restart in the event of system failure" and let it restart.  When it starts, it can now stop with an error screen and give an error message and code.

  Disconnect all external devices (printers, USB Hub, drives external, etc.) and try to start.

  Post back with the error information and results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I downloaded and installed LR and PS and they throw very well but when I try to change an ARW raw file all I get is a blue screen. Can anyone help?

  I downloaded and installed LR and PS and they throw very well but when I try to change an ARW raw file all I get is a blue screen. Can anyone help?

  Go to Preferences, Performance tab and uncheck the 'use graphics processor '.

• Blue screen, but can the safe boot mode

  I get the following error

  

  He then gets to my home screen, just before going to my office and then I get the blue screen:

  I am able to boot in safe mode.  I also tried boot of the last good configuration but still knowing the blue screen.

  Please help because I am stuck how to proceed!

  Hello

  Check your cables to the disk hard (on both ends) - remove and replace - do

  not only it to be tight (of course all power first deleting).

  --------------------------------------------------------------------------------------------------------

  Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  We can analyze the minidumps if make you it available from the OneDrive or other
  file -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  --------------------------------------------------------------------------------------------------

  BCCode: 50 0 x 00000050

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated a driver just before
  These began? (Check control panel - updates of Windows to see if all drivers
  have been updated it there all the time, it started) main likely culprits are video
  pilot, other great drivers, memory and antivirus/antispyware/security products
  could be faulty as well as reader questions.

  Use the troubleshooter below and refer to the following message for pilots and
  memory when you get these sections and then return of the disease.
  game needed.

  BCCode: 50 0 x 00000050

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA
  https://msdn.Microsoft.com/en-us/library/ff559023%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I get a blue screen, I can't seem to download anything it saids when I download something I expect and it saids Windows cannot access file I don't have the permission or path of specific device it saids

  I need a quick answer that please I can't download things like the fiesta or Halo. It shows keeps crashing and it will blue screen

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. what browser do you use?
  4. What is the accurate and complete error message on blue screen? If the system restarts immediately and then use disable automatic restart in case of system error.

  In response to the questions above could help us help you better.

  Steps to disable the automatic restart in case of system error:

  1. reboot the computer
  2 start typing the F8 key
  3. you get it anticipated the startup option window
  4. Select the disable automatic system failure reboot

• Why do I get an error 'blue screen '? How to fix?

  Hello-

  Recently I was making a mistake on my HP Pavilion dv5 notebook when you watch videos using WIndows Media Player.

  I open the video file in WMP, and then connect my HDMI cable on my HD TV to watch.  Some time in the film, all of a sudden he gltiches upward, then goes black, then blue and a bunch of white letters on the screen, then proceeds to dump physical memory and restart the computer.

  It has happened 3 times so far, out of the 4 times I tried to watch videos.  What's weird, is that I've been watching videos like this before, but it never did this before, never had any problems with WMP.

  Is someone can you please tell me what I can do to fix this? Thank you very much.

  Here are the details of the error that has occurred, as it appears to me after you restart the computer:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 7f
  BCP1: 0000000000000008
  BCP2: 0000000080050033
  BCP3: 00000000000006F8
  BCP4: FFFFF88004BA111D
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\081911-43773-01.dmp
  C:\Users\owner\AppData\Local\Temp\WER-81994-0.SysData.XML

  Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Yes that contains the graphics driver. Make sure you do a complete uninstall when you are being uninstalled it.

• I get the blue screen how can I get a recovery for my HP laptop cd?

  original title: I get the BSD how can I get a recovery for my HP laptop cd?

  Unable to start Vista, cannot restore the drive.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

  See you soon.

  Mick Murphy - Microsoft partner

• Blond hair is originally edges of pixel on the green screen, how can I fix?

  So I get really good with my key skills. Unfortunately in this video here (attached screenshot) can't seem to soften or stifle the blond hair and remove these pixelated edges... I searched all over the web only to find tutorials in After Effects... in any case I can fix this without having to use AE?

  

  Hey Danny,

  Here are pictures of our current set up. I'll upload the video soon as well.

  Thanks for the photos!

  I use a T5i DSLR rebel

  AT ISO 400

  100 shutter

  Opening to 5.0

  An SLR digital H.264 shooting is one of the poorest formats for shooting for the composition of the green screen. Sorry to be the bearer of bad news.

  I would recommend shooting with a camera that can record to a highest intra-image 10 bits of quality, like ProRes format. Many people use less expensive DSLR cameras (like yours) and AJA KiPro or Atomos Ninja HDMI data recorders to get this higher quality videos 10bits, ideal for the entry. They are quite affordable for what they do.

  We ensured that the lights are some 45 degrees angles of tripod of our DSLR, then we have the key "light" following the DSLR. With a transom for product photos and unboxing videos.

  You don't necessarily want ceiling for product, which can introduce hard shadows to talent. Key and fill should take care of most of the product lighting. However, a small 300 watt 'kicker' can be called for these lighting products. You want at least a fire behind the talent (called "Backlight"), which is usually directly behind or slightly eccentric talent. Aim the shoulders and the back of the head by focusing light, then it flood a bit. Adjustment of barn doors to avoid any excess of light entering the camera lens. I have this light almost half to 75 percent of the strength of the fill light.

  See this configuration of Jeff Foster:

  

  The subject is about 2 feet away from the backdrop. (We painted the green wall to reduce to a minimum the tripods and wrinkles.

  

  First of all, in my opinion, that this room is far too small for what you want to do.

  Talent of lighting
  It seems that you are more informed in front. Too fill key and not enough. You don't want three lights, try it with two 45 degree angles. Make sure you use the less powerful light for charging. Add broadcast if the lights are of the same power (which resembles what you have). I find this filling works best when he is about 65-70% as much strength as the key.

  Placement of talent vs the green screen
  I prefer to put at least 10 feet between the talent and the green screen (or bottom of any type) so that you can 'cut' any bright talent of the background and I can fly a backlight behind the talent. Remember you want light talent separately from the green screen. For example, if it was a VFX shot, you wish to turn it on dramatically so that it will blend with the background. In a demonstration of product, of course, it is not as important.

  Green screen lighting
  I can understand why you would want to reduce the installation program by painting the green wall, but I think're missing you an important point. The wall must be turned on too! And quite differently on how you would light of talent. If you need more space for this, as well. He needs to be very evenly lit with zero modeling. I like to use very broad and diffuse sources to that effect. A couple of big lights or soft lights work well for this. Use a directional light meter to make sure that you have all the hot points (see the illustration above for the "lights of the screen").

  You may not space or gear to shoot like you want, but I wanted you to know how I would have turned on this shot. You can do a little more research on how you can configure your studio to get better once you get your shot in Premiere Pro.

  Thank you
  Kevin

• When I try to open an all new video I get is a black screen, how can I fix this to see the video

  When I try to open any video feature posted on my comcast home page all I get is a black screen. the same thing when I try to open
  videos in my message. I can't even open a training video.
  How can I solve this problem.
  Thank you for your help.
  Y_Brown

  This does not happen on my computers.  Try to download Firefox from http://www.mozilla.org and see if that makes a difference.  I also recommend the safe boot and checking the virus.  Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Good luck.

• I can't get into xp. a blue screen appears with the 0x0000007e error code

  I went to a blue screen.  Can I make the Windows/sysrem22/hal.dll file is missing or damaged.  I made a copy of the file on a CD from another computer, but I don't know how to load it on my desktop computer.  It doesn't work in either safe mode.  I hope that if I can get this file copied to my desktop, everything will be OK.  Help, please.  Jon

  Hi jon56b,
   
  Follow the steps listed in the article given below to resolve this issue:
  How to troubleshoot a Stop error 0x0000007E in Windows XP
   
  For error "hal.dll is missing or corrupt", you can consult the following article:
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

• How can I stop this blue screen? BCCode: fe

  I've been getting this blue screen, what can I do about it? I think it has something to do with the possible usb drives I have d/l anything to solve the problem? Help, please. Thank you

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: fe
  BCP1: 00000008
  BCP2: 00000006
  BCP3: 00000005
  BCP4: 86DB15E0
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\WINDOWS\Minidump\Mini040511-01.dmp
  C:\Users\RIFFCSG\AppData\Local\Temp\WER-43602-0.SysData.XML
  C:\Users\RIFFCSG\AppData\Local\Temp\WERC8BA.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Hi rancidbulletbullet,
   
  Value of 0x000000FE BUGCODE_USB_DRIVER bug control a. This indicates that an error occurred in a bus universal series (USB) driver.
   
  For more information, see:
   
  Bug Check 0xFE: BUGCODE_USB_DRIVER
   
  Apply the hotfix provided in the link below and check if it helps you fix the problem:
   
  Verification of bug 0x000000FE under stress with USB 2.0 hard drive

• Blue screen of Windows Vista 64

  This problem started occurring after the system has been reformatted.
  Since the reformatting of drives, the system has been crash a lot, was the last crash.

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 4105

  More information about the problem:
  BCCode: 24
  BCP1: 00000000001904AA
  BCP2: FFFFFA600C81F3E8
  BCP3: FFFFFA600C81EDC0
  BCP4: FFFFF80001D83369
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Please note; I can't download updates.  Doing so blocks a host process, and it is more downloads.  I am also unable to Service Pack 2 installed, even with a program of stand-alone installation, when you attempt to install, he said: the system is not ready, or it hangs the computer.

  Hoping you can help me.

  Here's another error blue screen that has just occurred;
  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 4105

  More information about the problem:
  BCCode: 1a
  BCP1: 0000000000041790
  BCP2: FFFFFA80033A6BC0
  BCP3: 000000000000FFFF
  BCP4: 0000000000000000
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  Hello

  There were problems before you re-installed Windows?

  Given that you did do a re-installation means that the causes are mainly hardware, BIOS, low-level chipset
  drivers or other drivers and programs that load low level.

  To see how to use BlueScreenView and MyEventViewer to troubleshoot the Bluescreens see the
  Methods indicate in this thread - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites. This may not help but it's worth a shot. Don't forget to check the wiring and
  Rigorously test the hard drive.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------

  The most likely causes are the hard drive problems, wiring or a problem of hard disk (on the motherboard) controller. Some
  antivirus/antispyware/security programs could play a role. See message methods to test the
  course over ground.

  BCCode: 24 stop Code 0 x 00000024

  Cause

  One possible cause of this bug check is damaged drive. Corruption in the system of NTFS file or defective (sectors) on the hard disk can cause this error. Corrupted drivers SCSI and IDE may also compromise the ability to read and write to the disk system, so causing the error.

  Another possible cause is the depletion of memory pool non paged. If the nonpaged memory is exhausted, this error can shut down the system. However, during the indexing process, if the amount of memory available nonpaged pool is very small, another driver in nonpaged kernel memory in pool mode may also cause this error.

  Solve the problem

  To solve a problem of hard drive corruption: Check Event Viewer for error of SCSI and FASTFAT (syslog) messages or Autochk (the application log) that might help determine the device or driver that generated the error. Try disabling any antivirus software or Disk Defragmenter tools that continually monitor the system. You must also run the diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer. RunChkdsk /f /r to detect and resolve any file system structural corruption. You must reboot the system before the start of the analysis of disk on a system partition.

  BCCode: 24 stop Code 0 x 00000024<-- read="">
  http://www.faultwire.com/solutions-fatal_error/NTFS-file-system-0x00000024-* 1051.html

  -----------------------------------

  BCCode: 1a 0x0000001a

  The main cause of all who's memory probems if there may be other causes.
  See the test article in the next message memory.

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Make sure that the vents are clear and that the
  the fans are working. Even if the temperature is OK assume no heat does not affect the video,.
  sound or other system functions that it these get hot. Try adding a small fan blowing in
  the vents as a test.

  Have you recently added any hardware? Have you updated any drivers just before this started?
  (Check control panel - updates of Windows to see if all drivers have been updated it on the)
  This started the time) likely guilty hand are video driver, other great drivers, memory, and
  antivirus/antispyware/security products could be at fault as well as reader questions.

  Use the troubleshooter below and refer to the following message to drivers and memory when
  you get these sections and then back to the resolution of the problems according to the needs.

  BCCode: 1a 0x0000001a<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/memory-management-0x0000001A-* 1041.html? order = votes

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Blue Screen of Death... Urgent!

  Hey all. It's a little urgent, so any help is appreciated. So the story:

  It all started last Saturday in the fourth. I plugged my 5s 32 GB iPhone in car charger and it blue screened, what frightens me. I quickly unplugged and and soft restarted as soon as I saw him, and everything was fine.

  Since then, so three days later, I had to restart about 50 + times. So today I got sick of this blue screen, and I decided that I would try to fix it. I looked around solutions, and many say that it happens shortly after a solution when you remove the screen, but I've had my phone for four months and have never had to remove from the screen.

  The next solution was to restore factory default, so I decided to try it, after that I backed up in iTunes which is

  Finally, I was getting it restored, when all of a sudden, BAM. projected again blue.

  Since then, happened across this restore Middle blue screen of death, and it's practically a piece of metal shit now. I can't do anything. I can't force the restart it you a blue screen. Can someone give me advice? I have some upcoming vacation and need my phone. Can anyone help?

  Try recovery Mode

  Connect your device to your computer and open iTunes.

  When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo.

  Keep now until see you the recovery mode screen and wait that he eat.

  You may need to do the above, more than once as recovery mode is difficult to enter.

  Restore as New first, then restore sauvegardΘ if you wish.

  https://support.Apple.com/en-us/HT201263

  If the steps above do not help, you tested it on an Apple Store.