What are the repeated cases of blue screens? Can I fix?

Similar Questions

• What are the best setting of calibration screen for video editing, if you are shooting indoors, without natural light?

  What are the best setting of calibration screen for video editing, if you are shooting indoors, without natural light?

  Not really related to Prem Pro, however:

  Neutral gray scale to set the brightness (white saturation) and contrast (black crush).

  Conveniently located:

  Gamma: 2.2

  White point: 6500K (5800K with ambient lighting)

  Brightness: 100-120 (cd/m)

  Use a calibration device like SpyderElite (above applies). Grade with a neutral gray background low light level - easier on the eyes.

  Claire

• What are the. MTA files? How can I access? How to fix it.

  Original title: the MTA files

  What are the. MTA files?  How can I access? How to fix it.

  Post proposed by the facilitator for the appropriate forum placed

  No, it's something to do with a Samsung dlna (All Share) in my case, it changed my files for the MTA files.

• What are the following wait events? Someone can it translate into the details?

  What are the following wait events? Someone can it translate into the details?
  PX Deq: Example table Q
  PX Deq Credit: send blkd
  PX Deq: Join AC
  PX Deq: Signal ACK
  PX Deq: Fragment of Msg
  direct path read
  PX qref latch
  

  SQL> select event,total_waits,time_waited,wait_class from v$system_event order by total_waits;
  EVENT                          TOTAL_WAITS TIME_WAITED WAIT_CLASS
  ------------------------------ ----------- ----------- --------------------
  db file scattered read             9333287     2471813 User I/O
  *PX Deq: Table Q Sample            11401065    43684227 Idle*
  *PX Deq Credit: send blkd          13798394    25448649 Other*
  SQL*Net message from client       20767011  1179217392 Idle
  SQL*Net message to client         20767019        2618 Network
  *PX Deq: Join ACK                  23735308     1022426 Idle*
  *PX Deq: Parse Reply               24882798     1278726 Idle*
  rdbms ipc message                 25223968  2147012652 Idle
  *PX Deq: Signal ACK                26615286    27873560 Other*
  cursor: mutex X                   26745289       52071 Concurrency
  *PX Deq: Msg Fragment              43670924    78219774 Idle*
  
  EVENT                          TOTAL_WAITS TIME_WAITED WAIT_CLASS
  ------------------------------ ----------- ----------- --------------------
  PX Idle Wait                      68927042  4364594403 Idle
  PX Deq: Execute Reply             88498025     4326377 Idle
  PX Deq: Execution Msg            823922687   792964190 Idle
  *direct path read                1274423531     7242769 User I/O*
  *PX qref latch                   2.3745E+11    49638018 Other*
  
  122 rows selected.

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14237/waitevents.htm#i968375

• What are the SocialMiner features a license CCX can give you?

  Hello world

  We currently use 10.6 UCCX and we seek to use features Web Chat and Email of SocialMiner.

  My company is also looking to procure a stand-alone product for managing contacts with Facebook and Twitter social media.

  A premium UCCX license can also manage inbound social media messages using SocialMiner, or we are just limited to the cat electronic Agent or website through Finesse?

  The documentation I've seen is not really clear.

  Thank you!

  You need a minimum of CCX premium to use SocialMiner. And also need to buy the license server and media. There is no separation of functions in the SM. You can use all the features that result. SM was scheduled for treatment of social message. The e-mail of the agent and the cat has been added only recently.

  Thank you!

  -JT-

• What are the versions of Robohelp last?

  HelloW,
  
  I intend to buy a system like Robohelp help authoring, but I need to know whether or not Adobe Robohelp 6 is the latest version.
  
  If this is not the case, what are the latest versions? and how can I get their trial?
  
  Thank you.

  An ot the output options in RoboHelp of WebHelp Pro. Click on the link below to see the RoboWizard on the difference between WebHelp and WebHelp Pro. It contains a link to the topic of John Daigle on WebHelp Pro.

  http://www.RoboWizard.com/RoboWizard/NewProject.htm#MonthlyScry/082005.htm

  Where did you read RoboEngine in these topics, which is the name of the previous version of RoboHelp Server 6.

  Don't think WebHelp Pro is a must have. A lot of people to produce professional help perfectly well with plain WebHelp. You must decide if you need not additional features. The Pro is no longer output contains the natural language search you'll see referred to in these sections.

• What are the documents Eloqua you searched and were not able to find? What does not exist you think we need?

  What are the documents eloqua looking that you can't find? What questions of support or you have asked who had no documentation?

  See Kristin Connell discussion and thought it might be a matter of good discussion to identify gaps and creating opportunities for communities to help create connections to the existing documentation.

  CC Leigh.Burke - Oracle

  I like the riff! I will plan to share technical information I receive notifications of site visitor Web here...

• What are the elements appear on the screen of the ATV 4

  What are the elements appear on the screen of the Apple TV4

  Initially just the settings and a few applications for iTunes movies, music, TV shows etc, then this is all the apps that you download from the store.

• What are the causes my screen to instantly display several small pages?

  What are the causes my screen to instantly display several small pages?

  Your username appears to be rather ironic.

  Given the richness of the information you provided, I guess, whatever the version of Pages that you use, you've opened the model selector.

  Peter

• What are the blue lines in the edition of flex?

  What are the blue lines in the edition of flex?

  They are markers of flex tempo... Info of tempo based inserted automatically embedded in the file. If you want to remove

  Edition->-> remove tempo tempo. -then reset flex markers

• all the time on vista blue screen - stop 0x7F

  I get this blue screen im on vista please help me
  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057

  More information about the problem:
  BCCode: 1000007f
  BCP1: 00000008
  BCP2: 80156000
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini061811-03.dmp
  C:\Users\dan\AppData\Local\Temp\WER-170437-0.SysData.XML
  C:\Users\dan\AppData\Local\Temp\WER924F.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Hello

  You have ZoneAlarm or any 3rd party firewall installed? If so, this could be the cause.
  Other antivirus/security programs could be at least partially responsible.

  This fix "could" apply however do not use if you are quite safe.

  Two drivers of platform using WFP (Windows Filtering) causes a computer crash when the
  computer running Windows Vista, Windows 7 or Windows Server 2008
  http://support.Microsoft.com/kb/979278

  Check also:

  The General causes of errors "STOP 0x0000007F" (applies to Vista and Windows 7 as well)
  http://support.Microsoft.com/kb/137539

  ===========================================================

  For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
  If this thread - top 3 RESPONSES (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------

  BCCode: 0x0000007f with the parameter 00000008 7f usually means a hardware problem.

  Have you added a hardware or drivers updated recently? Check Control Panel - Windows
  Updates to see if all drivers have been updated it just before what is going on has begun.

  For 7f - this could be a problem of material such as uncomfortable cards or memory, while there are
  other causes. Power electric low could also lead to this. Use the troubleshooters above and below
  and when you get to the drivers and memory sections refer to my next message below and then
  return if necessary troubleshooting services

  If a PC remove ALL power. Opening the case, remove and reinstall all memory cards and ALL
  cable (try not just to close) on both ends if they are accessible and on the device ends if not
  (remove the cables and the resettlement of help them to eliminate minor corrosion).

  Notice the 08 (double fault) as 1st parameter means there are likely two causes. Do not forget to update
  your drivers manually as using Windows updates are only certified and Microsoft drivers and
  device manufacturers are far behind in this process. NETWORK, WiFi, BIOS and video/display card update and
  other major engines

  If a laptop or a PC, you will need to take a shop (not BestBuy or other BigBox stores) or your
  Support of the machine system.

  ----------------------------------------------------------------------

  BCCode: 7F 0x0000007F which is the same as 0x1000007F

  UNEXPECTED_KERNEL_MODE_TRAP bug control has a value of 0x0000007F. This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

  This trap might be a bound trap (a trap the kernel is not allowed to capture) or adouble foul(an error occurred during the processing of an earlier fault, which always results in a failure of the system).

  Parameters

  The first parameter that is displayed on the blue screen indicates the number of trap.

  The most common trap codes are the following:

  • 0x00000000 or division by zero error, indicates that a DIV instruction is executed and the divisor is zero. Memory corruption, other hardware problems or software failures can cause this error.
  • 0 x 00000004, or overflow, occurs when the processor executes a call to an interrupt handler when the overflow (OF) is flag set.
  • 0x00000005, or limits check fault, indicates that the processor, then executing a BOUND instruction, determines that the operand exceeds the specified limits. A BOUND instruction ensures that a signed array index is within a certain range.
  • 0 x 00000006 or Opcode not valid, indicates that the processor attempts to execute an invalid instruction. This error occurs generally when the instruction pointer is corrupted and point to the wrong address. The most common cause of this error is hardware memory corruption.
  • 0x00000008 or Double fault, indicates that an exception occurs during a call to the previous exception handler. In general, two exceptions are handled in series. However, there are several exceptions that cannot be handled serially, and in this case, the processor signals a double fault. There are two common causes of a double fault

  
  CAUSE

  0x7F bug check occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

  A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same battery. For example, if two file system filter drivers are associated to the same stack and then again the recursively of file system, the capacity of the battery.

  
  Solve the problem

  Troubleshooting: If you have recently added the material to the computer, remove to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. Run the diagnostics of material that does not have the system manufacturer supplies to determine which hardware component.

  The scanner memory is particularly important. Faulty or incompatible memory can cause this bug check. For more information on these procedures, see the manual of your computer. Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

  If the error appears on a newly installed system, check the availability of updates for BIOS, SCSI, or card network controller. These updates are generally available on the Web site or the hardware manufacturer BBS.

  Confirm that all hard drives, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, in this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console in order to access the file.

  Also to restart your computer and press F8 to character-based menu that displays the choice of operating system. In the menuof Advanced Options , select thelast known good Configuration option. This option is most effective when you add a single driver or service at a time.

  Overclocking (setting of the CPU to run at a speed higher than the nominal specification) can cause this error. If you have overclocked to the computer that is experiencing the error, return the CPU to default clock speed setting.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error. You can also disable caching memory BIOS to try to resolve the problem.

  If you have encountered this error during the upgrade to a new version of the Windows operating system, the error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version. If possible, remove all third-party device drivers and system services and disable all antivirus before upgrade you. Contact the software manufacturer for updates of these tools. Also, make sure that you have installed the latest Windows Service Pack.

  Finally, if all of the steps above do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

  BCCode: 7F 0x0000007F which is the same as 0x1000007F<-- read="" this="">
  * 1304.html http://www.faultwire.com/solutions-fatal_error/Run-a-System-diagnostic-Utility-supplied-by-your-0x1000007F-

  ==================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• What are the best practices framework OA customizations autour?

  Hello

  We make many customizations in our case.

  What are the best practices around customizations.

  How to document?

  What is a good practice to make all the customizations by using functional Adimistrator?

  Kind regards

  Sandra

  Best place for this question would be OA Framework

  What are the best practices around customizations.

  What do you mean by that? There is one way you can do customization. But the functionality can be achieved differently, in this case, it will be very specific in what you want to achieve.

  If you reference how to do customization, such as aid of the functional administrator or go to the page and clicking in the Customize link in the page or by using the xml file and using XMLImporter, it is not really important.

  If ask you questions about the migration of customization, you can either export to leave an instance and import them into another instance using functional administrator or XML importer. Or do it manually again.

  The XML importer is usually easy and need less documentation from the point of view of migration.

  How to document?

  If you migrate manually, could better document the steps with screenshots.

  If not, document changes in the screen as well as the reference to the downloaded file customization.

  What is a good practice to make all the customizations by using functional Adimistrator?

  This is one of the option.   I don't see anything wrong with that.

  By accessing the page could be more easily test the change.

  See you soon

  AJ

• What are the definitions of colors that are triangles of histogram in Lightroom?

  What are the definitions of colors that are triangles of histogram in Lightroom?

  I just got working with the histogram in Lightroom.
  I understand the basic principles and how to apply the settings to eliminate the white triangle and get it to gray when the triangle lights up.

  I notice that the Triangle will both light up in different colors such as:
  Yellow, white, red.
  What do the colours mean?
  Finally, I get to have the gray triangle Tower.
  However: I do the right setting to get to the gray color where one white color other then lights?

  In other words:
  If I change the whites/highlights is that the correct change or should it be exhibition based on a color then other white indicating in the triangle.

  I hope I explained my question properly, ask any follow-up questions if I failed to make the case for the question.
  Thank you

  Greg

  Triangles indicate that one or more channel was cut in the shade (left) or (right) highlights.

  When a channel has been cut, there is no color of this channel - i.e. the value is 0 or 255.

  Edit: Lightroom uses % instead of levels for color values, so are the number 0 or 100%

  red = red channel cut

  Green = green channel cut

  Blue = Blue channel cut

  cyan = green, and blue channels cut

  Magenta = red and blue channels cut

  yellow = the red and green channels cuts

  Gray = all clipped channels

  dark gray only = no Cup channel

  Unless you are working with images for scientific use, I had put the dark and light tones for the most part looking at the picture itself, rather than using the histogram. The histogram tells you a lot about the image in the blink of an eye, but there is no such thing as a histogram "perfect."

  What I usually do is hold the ALT key while dragging the cursor highlights and blacks, which show the cutting in the image itself. I'd rather not have reflections clipped (except for specular highlights) and usually have a little black clipping som real black in the picture.

  How the shadows and highlights of an image depend a lot on the nature of the image and your personal preferences.

  Some images look better without blacks or whites, like the one below.

  

• What are the two icons to the left of the indicator in the mac mail (arrows and circle)?

  What are the two icons next to the flag in the mail from mac (arrows and circle)?

  I can't understand what they're doing. Thanks for any help!

  If you are referring to the registration of the preview, the arrows appear when you Replied (curved) or transferred (right arrow) by e-mail.

  The circle, when rempli filled in blue, indicates you have not yet opened / read the email.

• What are the details of the 3-year warranty on Tecra?

  What are the details of the 3-year warranty for computer Tecra laptop w/r bad pixels? Toshiba gives no kind of guarantee of "zero pixel wrong" even for a limited period?

  Hello

  As in the previous mentioned announcement, there must be a certain number of dead pixels on the display in place of the screen.
  It s no matter if it s a s one or three years warranty.

  As far as I know during the guarantee period Toshiba will replace your screen if the number of defective pixels is greater at:
  -10 bad pixels to screen VGA (640 x 480)
  -15 bad pixels to screen SVGA (800 x 600)
  -20 defective pixels for screen XGA (1024 x 768)

  I found some useful documents FAQ on the Toshiba site.
  Please read these documents for yourself:

  I have one or more bad pixels on my screen, I can fix it?
  http://support.toshiba-tro.de/KB0/FAQ350079001NR01.htm

  What is the maximum number allowed and the type of fault of pixel your monitor LCD Toshiba can expose by 1 million pixels?
  http://support.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm