any new documentation for Beta 3.0 - 2.7.5 procedures do not work on 3.0

Similar Questions

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor

• just has got rid of the virus and responsible for all the disks but given the wifi does not work

  WiFi doesn't work do not

  just has got rid of the virus and responsible for all the disks but given the wifi does not work

  Hello

  Check with the system manufacturer or the actual WiFi device manufacturer and ask in their forums (if any)
  for problems known.

  Actually, try updating your driver:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• my button is not the top of my list of contacts - when I start typing a name, a list does not appear, for me to choose and my spell checker does not work

  my button is not the top of my list of contacts - when I start typing a name, a list does not appear, for me to choose and my spell checker does not work

  Hi Lynn,

  What mail client do you use?

  Using Windows Live Mail or Outlook?

  For Windows Live Mail:

  The best place to ask your question of Windows Live is inside Windows Live help forums. The experts he specialize in all things, Windows Live and I would be happy to help you with your questions! Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.

  For Outlook:

  http://answers.Microsoft.com/en-us/Office/Forum/Outlook

  If you are not using one of the people then please let us know what you use so that we can help you further.

• I bought a new computer and also Adobe acrobat Pro XI.  It did not work properly.  I uninstalled and tried to reinstall it, but the computer will not accept the serial number.  What can I do?

  I bought a new computer and also Adobe acrobat Pro XI.  It did not work properly.  I uninstalled and tried to reinstall it, but the computer will not accept the serial number.  What can I do?

  You accidentally type in a redemption code when he says he only wants a serial number?

• Windows store tells me that Revel is installed on my PC for Windows 8.1. Even if it does not work on my iPad, there is no sign of it on the PC. I can't connect to the PC.

  Windows store tells me that Revel is installed on my PC for Windows 8.1. Even if it does not work on my iPad, there is no sign of it on the PC. I can't connect to the PC.

  I can not uninstall revel and reinstall it because I can not find it and because Windows store says it is already installed.

  Hoping someone can help.

  Hi JRSJS,

  Windows 8.1 makes it easy to find installed apps! Here is a link that can help you:

  Tip Windows 8.1: Find your installed applications. Windows 8 content SuperSite for Windows

  You can find this link also somewhat useful:

  http://www.fixedbyvonnie.com/2013/12/where-are-apps-in-the-Windows-store-installed/

  I hope this helps!

  Glenyse

• I am trying to install CS5 on my new computer. My other was stolen. Serial number does not work.

  I am trying to install CS5 on my new computer. My other was stolen. Serial number does not work.

  If you can't find your serial number (http://helpx.adobe.com/x-productkb/global/find-serial-number.html), you must contact adobe support (http://www.adobe.com/support/chat/ivrchat.html).

  If you do not find your installation disc: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

• Any new aid for the standard bug 'Installer cannot initialize' for CS6?

  I can't install CS6 because "Setup could not initialize".

  This is a very common mistake, and I think I've read suggestions how to overcome the problem.

  especially this one:

  1. Uninstall CS6

  2. apply the Adobe CC cleaning tool

  3 reinstall CS6

  It isn't even a log file.

  I had already installed CS2. Uninstalling CS2 and CS6 relocation do not work either.

  Fragments of CS2 are not affected by the CC cleaning tool.

  I tried the CD version and the version you downloaded.

  On the PC with Windows XP, all facilities have been properly implemented.

  Where to look (examples):

  https://www.Google.de/search?hl=de & as_q = install + failed + to + Initialize & as_epq = & as_oq = & as_e q = & as_nlo = & as_nhi = & lr = & cr = & as_qdr = all & as_sitesearch = & as_occt = any & safe = images & as_filetype = & as_rights = & gws_rd = ssl

  http://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://www.thailandteaching.Asia/computers-and-electronics/32511-Adobe-trial-installation-Installateur-failed - initialize.html

  This is a new computer with Windows 7 (64-bit). There are more than a dozen other programs

  (some of them very old) that could be installed easily and that work perfectly.

  CS2-Info:

  Adobe Photoshop Version: 9.0 (9.0x196)

  Operating system: Windows NT (actually Windows 7, 64 bit)

  Version: 6.1 Service Pack 1

  System architecture: AMD CPU Family: 15, model: 2, Stepping: 0 with HyperThreading, FP SSE, MMX, SSE2, SSE whole

  Number of physical processors: 8

  Processor speed: 4013 MHz

  Built-in memory: 8092 MB

  Free memory: 6621 MB

  Memory available to Photoshop: 2786 MB

  Memory used by Photoshop: 70%

  Image cache level: 6

  Serial number: #.

  The application folder: C:\Adobe CS2\Adobe Photoshop CS2\

  Temporary file path: C:\Users\Ho\AppData\Local\Temp\

  Zero Photoshop has async I/O active

  Scratch the volumes:

  F:\, 465, 7 G, 465, 5G free

  Startup, 920, 1 G, 858, 5G free

  Main Plug-ins folder: C:\Adobe CS2\Adobe Photoshop CS2\Plug-Ins\

  Additional Plug-ins folder: not defined

  Plug-ins installed:

  SMA 3.10x21...

  I would also appreciate advice a lot.

  Cordially - Gernot Hoffmann

  The PDApp.log log file is not where it should be, but in the temp folder (accessible from %temp%).

  He told me:

  Old content detected in USF tries to remove...

  Cannot remove

  An Internet search by "former content in USF" lead to this discussion with Adobe staff people.

  especially Mr.Jeff has Wright, who seems to be very useful:

  https://forums.Adobe.com/thread/988925?start=0&TSTART=0

  Here, we have such a log file.

  Solution

  
  

  Activate the preinstalled ' guest' account.

  Start Windows as a guest.

  Unfortunately the Office looks terrible (standard windows)

  Find the CD drive and start the installation of the CS6.

  This method works as well offline (Activation within 7 days later).

  When you are done restart as long as the previous user.

  Create icons to monitor.

  Disable the guest account.

  Turn it back on.

  It seems, Adobe wants to protect me against the abuse of my own computer...

  Cordially - Gernot Hoffmann

• Driver for 2 GB AMD Radeon HD M 8730 does not work. Dell Inspiron 3521

  my laptop is brand new. 1 week and I cannot get my Radeon 8730 M graphic card work. laptop model is Dell Inspiron 3521.   I tried to install the original driver from the dell support page. I tried with the pilots of the AMDs website. I have installed and uninstalled the drivers at least 10 times.   When I run the catalist of amd installation configuration shows that all the drivers and the software is correctly installed and up-to-date, but Device Manager shows something else.  also, I have absolutely no option available in the catalyst software.  my windows system note (index) is 1.0 due to the graphic performance.   any ideas?

  return with good news.

  I formatted the partition on the witch my windows was installed. re-installed windows and all the drivers. I started with the AMD driver but I was disappointed. It still did not work. then I thought, maybe there some co-drivers with some chipset drivers, so I downloaded and installed all the drivers. including the Intel HD 4000 driver. I think it was one that has not been installed correctly and the Radeon card because of the witch did not work.   so if anyone else has this problem, don't forget to uninstall the driver amd and intel driver hd 4000 and then install again, it should solve the problem.

  Thanks for the help.

  Norbert

• Brand of Smartphones blackBerry New 8530 - many pre-installed applications on the Menu screen will not work

  I just bought a BlackBerry Curve 8530 from Verizon.  This is my first BlackBerry and I'm pretty happy with it up here - but by exploring all the features, I encountered a problem.

  So far, under the screen of Menu key, I tried to use V CAST song ID, AllAccess, and Bing.  Every time, when I chose the icon, I was taken to a new page, and you are prompted to accept the terms of the service and download the software.  Then, I waited several minutes for the software to download.  When it was over, he told me it was done downloading and gave me two options: 'OK' or 'run '.

  With V CAST song ID and AllAccess, I chose "Run" and threw on the terms of service / download screen.  I hit the Menu key and tried to select the applications in this way - but nothing happened.  I mean NOTHING.  The screen remained the same, nothing open, NOTHING.  With Bing, I chose 'OK,' to see if it has changed things-, but once again, I've been dumped on the terms of service / download screen, and when I press the Menu button and tried to select the application from there, nothing happened.

  I was able to successfully download and run Blackberry App World and successfully download and run another application here-, but it seems that whenever I try to download and run an application that already appears on the Menu screen, it will not work.

  Everyone knows about this problem before?  Any ideas as much as solutions?  As I said, I'm totally new to BlackBerry, so I would really appreciate it.

  Yes, this is what happened with the app I downloaded successfully via App World.  However, applications that do not work are not there.  (And I don't think they would even if they worked correctly BlackBerry App World, which I was able to download correctly, not included in this issue: he stayed on the home screen Menu and worked when I selected it.)  Thank you, though.

• What happened to the flash swf? Flex? and what is the new flash will look like? (HTML5/Javascript)? Flash does not work on droids or Iphones currently until the?

  Hello

  I'm more angry to discover that adobe Flash has changed once with Flex and now it also seems to be unusable. Every news source and, frankly, Adobe should do a much better job informing developers creative clould

  How to better use its products. I imagine that the security issues with adobe flash make unusable today. I just tried a simple slide show in flash and of course, he did not work on my droid which brings me to this status to feel screwed by Adobe!

  
  

  
  

  What version of flash if everything works on all websites and mobile devices for chrome browsers, fire fox and IE?

  Hi Rob, take your question to Adobe animate CC - homepage. There are many new choices available with the last Fl which is compatible with mobile devices.

• Satellite Pro M30 - Win XP - for the brightness of the display FN keys do not work

  I just do a fresh install of win xp on a satellite pro M30 laptop.
  I installed the drivers bt the fn keys (brightness, etc.) will not work if the screen is very dark!

  I tried to update the bios, but it won't let me.
  Also tried to install the common modules but get an error saying that it didn't is not supported on this hardware!

  Can someone please help.
  I think you need to install the drivers in a specific order.
  Is this true? Or y at - it way round this?

  Any help would be appreciated.

  > I tried to update the bios, but it won't let me.
  > Also tried to install the common modules but get an error saying that it didn't is not supported on this hardware!

  To me, it seems that you tried to install applications that are not compatible with this laptop.
  Where did you get the drivers?

  On the European driver of Toshiba in archive page, you can find the drivers for Satellite Pro M30

• my habit of nx1300 epson print more help, I just put 1 new ink cartridges, and then I put in all 4 still not working

  I just put 1 new ink cartridges, then I put total 4 still does not work

  Hi mimi,

  Please contact Epson technical support for assistance: http://www.epson.com/cgi-bin/Store/support/SupportIndex.jsp.

  Good luck!

  Kosh

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• Drivers for NETGEAR WG311v3 54 Mbps Wireless PCI Adapter will not work.

  Windows 7 installs the drivers for the WG311v3 automatically, but after installation, the hardware does not work and I have an exclamation mark next to the card wireless in Device Manager.  I then looked at the properties and saw in the device state that "the device cannot start. (Code 10) "this device worked under vista, but doesn't work on 7. I installed the drivers that came with him and tried all compatibility modes, but nothing works. Any Suggestions?

  My hardware is
  -Intel Core 2 Quad CPU Q6600 @ 2.40 Ghz
  -4 GB DDR2 800
  -Geforce 9600 gt
  -motherboard: Asus PN5D

  Have a look here

  http://KB.NETGEAR.com/app/answers/detail/A_ID/11127/kW/Windows%207/r_id/100109

  above the link for the driver

  http://forum1.NETGEAR.com/showthread.php?t=41978

  I have not updated my, but did some research on the whole.