Anyconnect VPN connection kills the IP Communicator
AnyConnect version 2.5.0217
ASA 8.0.5
IP Communicator 2.1.4
Connection with Anyconnect and can access myremote network ok. If I run the IP Communicator application it fails to register and my remote access via Anyconnect stops working. I need IP Communicator to close and restart Anyconnect to retrieve my connection. Communicator IP works very well with the ipsec client. Any ideas?
Hi Adam, a friend of long date!
Bug looks like, I did the search in the database. This a resambles behavior...
Bug ID: CSCte42788
ASA anyconnect CONN DTLS is demolished when tftp error MSG is rvd-CPIC | |
Symptom:
ASA with DTLS anyconnect connection, when tftp This will cause a temporary stoppage of traffic This is seen commonly in Cisco IP communicator when it attempts to use Conditions: (1) client TFTP and results in a TFTP error message Workaround solution: (1) disable the TFTP inspection |
Best regards
Jorge
Tags: Cisco Security
Similar Questions
-
AnyConnect VPN connects to the work but not the House
Hello
I tried searching for this problem, but I have not found something that I think applies to this situation.
A University that I work uses a vpn ssl with Anyconnect and while in my office at another University, I can easily connect (even through a firewall). However, at home I can not connect. If I connect to the webvpn then the connection hangs at the part where the installation program is to analyze the computer and nothing happens. If I open the program Anyconnect sslvpn address in the login field and I get a time-out error.
I tried to disable the windows firewall and my antivirus, but this is not enough, and not that he should, since both are active while at my desk. I also tried connecting via ethernet and wireless at home.
OS: Windows 7 64-bit
Thank you very much for your help!
We started to see a similar problem a few weeks ago and concluded that when not at the office, users must uncheck the proxy configuration in Internet Explorer before AnyConnect works. Once they VPN, they must of course activate the setting back on proxy.
So far we can say, IE started to cache the proxy.pac and use it when the user is not connected to the corporate network. We are still investigating but would be interested in hearing if this affects others now, and if this is a recent problem for them.
-
Establish the VPN connection before the user logged
Hello world!
Anyone know if it is possible to run the cisco vpn client and establish the vpn connection before the user logs (Windows 7)? How?
Thanks in advance!
You must Anyconnect VPN.
use start before logon feature you can get the VPN before windows logon.
There are a lot of configuration guide that you can find in CISOC regarding anyconnect SBL.
-
Original title: suddenly I can not connect to the Microsoft Community
I present this post on a second computer. Up to a few hours, after I installed Windows Live Movie Maker, I can no longer connect to the Community MS on my other PC. When I click on 'Sign In' to the MS Community Home Page, I get only a blank, even if his tab page says "connect to your Microsoft account.
I think the problem is in IE because I can sign correctly using Chrome or Firefox.
Can someone shed some light on this problem and we hope to provide a solution?
I have a similar problem on this computer and I am trying to solve the problem. I managed to connect to the Microsoft Community forums by opening Internet Explorer InPrivate browsing. This is only a workaround until I have solve the underlying problem.
PIN Internet Explorer in your taskbar, do a right click on the new icon in the taskbar and select start InPrivate browsing. You can then enter the web address of the Microsoft Community and it should open the community forum. If you click on connect, you will be presented with the Login Page. Unfortunately, please follow this procedure complicated, whenever you want to connect to the community.
On this computer I can connect to other services that require registration to the Microsoft Account for example TechNet. The problem is only with the Microsoft Community forums. What version of IE are you using?
A suggestion if you are using Internet Explorer 9, 10 or 11.
Access your profile. Make sure that you have connected. Click all Threads, click on the star to the top right of the screen (you need to press F11 to see if you're reading full screen), click the scroll right to add it to Favorites, and then select Add to Favorites bar. Change the long name for something memorable, and you can immediately access your son in your Internet Explorer Home Page.
-
Running the logon script after AnyConnect VPN connection
Is it possible (such as the Launcher on the IPSec client) to run a login script after establishing a VPN connection? When a user connects to the VPN client AnyConnect I need to be able run a login script to map drives. I looked the ASDM, but see anywhere that it seems that this would be configured. I thought I would check to make sure I'm not missing something.
We lack ASA IOS v8.2 (2), ASDM 6.2 (5).
Thank you.
You can learn more about the AnyConnect script capabilities on the link below...
-
The Cisco AnyConnect VPN connection host bridge/NAT comments
I think I know the answer to that, but I hope I'm wrong. I have 9 Workstation on a Windows 7 laptop, and I wonder if it is possible to get my guest VM (Windows and non-Windows (if it matters)) to have access to my VPN connection when I am connected. Preferably through NAT, if it is then connected by a bridge. I found this post where the poster indicates that you can deselect 'connect the adapter to the virtual host' and he's got to work, but this does not work for me, unless I'm missing something or it depends on the type of VPN connection or installation. I read that you can not address IPSec VPN, but I don't know what type I'm sure I can't say the AnyConnect client.
Thank you
BrianBy default the anyconnect software won't allow all connections to the VPN tunnel. So once the connection is established you can not connect to the host on the local network more.
If you do a 'route print' on the host before and after the VPN connection is established, you will find that the VPN connection has set the parameter WOG network for the lowest value which makes the default and sets a mask that blocks all other connections. You can remove the mask route to access the host on the local network, but you will not get a direct connection to the virtual machine VPN tunnel.
If you search the forum here for VPN, you can find a post about this.
-
Error 651 PPPoE VPN connection after the upgrade and reboot
I have Win7 and a PPPoE VPN connection working perfectly well until tonight after the upgrade and reboot, the VPN just stopped working and gives an error code 651. I have nothing newly installed. What was wrong?
Hello
The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you
-
Cisco AnyConnect VPN connection has not changed my public IP address on Windows 7 64 bit
Hello
I installed a customer Cisco AnyConnect VPN from my school, so that I can access school of my Windows 7 laptop at home network. I was able to connect, but when I used http://www.whatismyip.com/, it still shows the IP address assigned by my ISP. The "network and sharing Center", I have my original LAN and LAN VPN upward but access to LAN VPN type is 'without Internet access. The VPN connection seems to have activities based on evolution bytes sent and received.
I searched the Web for solutions and changed something like adding the entry door. But it did not help.
Thanks for your help.
Split tunnel is probably configured so that traffic destined to school networks pass through the VPN tunnel, and traffic destined to the Internet goes outward through your local ISP. That's why whatismyip show your public IP address from ISP.
-
AnyConnect and connections to the secure gateway are not allowed
Hello
I'm trying to understand a problem I'm having with AnyConnect 2.5. After I connect to the SSL VPN portal and download and install the client I get this message. Once the customer installs I have also no network connectivity at all. Once I have uninstall the client that I can't access Internet connectivity and network is restored. Its obviously a config issue, but I can not understand where I am going wrong. I am also unable to change the link to the field like its locked down.
This happens because you, in your profile config file, set it to always on the VPN connectivity. 2.5 AC and ASA 8.3 introduced the ability to apply always on connectivity to provide more control and security on endpoints. This can be corrected by editing your profile or an exception through DAP or ASA GP. I posted a link to the doc below. Please see the sections under detection network reliable and always on the VPN.
I hope this helps. Let me know if you have any other questions.
Thank you
Christopher
-
I have been going back and back, questions and answers about the Intuit community without any problem. Now, since Friday night, I not was able to get back in. I get the error message 500 of Mozilla. I use Windows 7 and I have Firefox installed 19.0.2. Everything was fine until Friday night. I don't know what has changed.
The problem occurs only after you open the page, click Sign In, fill out the form, then click the Sign In button blue?
Does make a difference if you use a secure connection?
-
Win7 VPN connects - returns the error code 806
I use Win7 Ultimate, and try to establish a VPN connection to a job server. I have a XP Pro system which connects OK but cannot get W7 to. I have install the VPN as close to the installation of XP as I can but it works always... it refers to what a "check username and password" then there are there for about 3/4 minutes, returning an error message 806. The modem/gateway has defined passthrough VPN and port 1723 in the firewall (don't forget XP connects OK) so I guess that the basis of the network is configured OK (?).
I need help on what to do... I am new to W7 so am struggling a bit finding my way around.
Thank you
HuntsmannSee this RRAS Team Blog entry for possible help... MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.
-
IPSec VPN: connected to the VPN but cannot access resources
Hello
I configured a VPN IPSec on two ISP with IP SLA configured, there is a redundancy on the VPN so that if address main is it connect to the VPN backup.
QUESTIONS
-Connect to the primary address and I can access resources
-backup address to connect but can not access resources for example servers
I want a way to connect to backup and access on my servers resources. Please help look in the config below
configuration below:
interface GigabitEthernet0/0
LAN description
nameif inside
security-level 100
IP 192.168.202.100 255.255.255.0
!
interface GigabitEthernet0/1
Description CONNECTION_TO_DOPC
nameif outside
security-level 0
IP address 2.2.2.2 255.255.255.248
!
interface GigabitEthernet0/2
Description CONNECTION_TO_COBRANET
nameif backup
security-level 0
IP 3.3.3.3 255.255.255.240
!
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
boot system Disk0: / asa831 - k8.bin
boot system Disk0: / asa707 - k8.bin
passive FTP mode
clock timezone WAT 1
DNS domain-lookup outside
DNS server-group DefaultDNS
Name-Server 4.2.2.2
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of object obj-200
192.168.200.0 subnet 255.255.255.0
Description LAN_200
network of object obj-202
192.168.202.0 subnet 255.255.255.0
Description LAN_202
network of the NETWORK_OBJ_192.168.30.0_25 object
subnet 192.168.30.0 255.255.255.128
network of the RDP_12 object
Home 192.168.202.12
Web server description
service object RDP
source eq 3389 destination eq 3389 tcp service
network obj012 object
Home 192.168.202.12
the Backup-PAT object network
192.168.202.0 subnet 255.255.255.0
NETWORK LAN UBA description
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.200.0 255.255.255.0
object-network 192.168.202.0 255.255.255.0
the DM_INLINE_NETWORK_2 object-group network
network-object object obj-200
network-object object obj-202
access-list extended INSIDE_OUT allow ip 192.168.200.0 255.255.255.0 any
access-list extended INSIDE_OUT allow ip 192.168.202.0 255.255.255.0 any
OUTSIDE_IN list extended access permit icmp any any idle state
OUTSIDE_IN list extended access permit tcp any object obj012 eq inactive 3389
gbnltunnel_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0
standard access list gbnltunnel_splitTunnelAcl allow 192.168.202.0 255.255.255.0
BACKUP_IN list extended access permit icmp any any idle state
access extensive list ip 196.216.144.0 encrypt_acl allow 255.255.255.192 192.168.202.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
backup of MTU 1500
Backup2 MTU 1500
local pool GBNLVPNPOOL 192.168.30.0 - 192.168.30.100 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any backup
ASDM image disk0: / asdm-645 - 206.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static static source NETWORK_OBJ_192.168.30.0_25 destination DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.30.0_25
NAT (inside, outside) static source DM_INLINE_NETWORK_2 DM_INLINE_NETWORK_2 NETWORK_OBJ_192.168.30.0_25 NETWORK_OBJ_192.168.30.0_25 non-proxy-arp-search of route static destination
!
network of object obj-200
NAT dynamic interface (indoor, outdoor)
network of object obj-202
dynamic NAT (all, outside) interface
network obj012 object
NAT (inside, outside) interface static service tcp 3389 3389
the Backup-PAT object network
dynamic NAT interface (inside, backup)
!
NAT source auto after (indoor, outdoor) dynamic one interface
Access-group interface inside INSIDE_OUT
Access-group OUTSIDE_IN in interface outside
Access-group BACKUP_IN in the backup of the interface
Route outside 0.0.0.0 0.0.0.0 2.2.2.2 1 followed by 100
Backup route 0.0.0.0 0.0.0.0 3.3.3.3 254
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
WebVPN
value of the URL-list GBNL-SERVERS
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
http server enable 441
http 192.168.200.0 255.255.255.0 inside
http 192.168.202.0 255.255.255.0 inside
http 192.168.2.0 255.255.255.0 inside
http 192.168.30.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outdoors
http 0.0.0.0 0.0.0.0 backup
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
ALS 10 monitor
type echo protocol ipIcmpEcho 31.13.72.1 interface outside
NUM-package of 5
Timeout 3000
frequency 5
Annex monitor SLA 10 life never start-time now
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto IPSec_map 10 corresponds to the address encrypt_acl
card crypto IPSec_map 10 set peer 196.216.144.1
card crypto IPSec_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside crypto map inside_map interface
ipsec_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
ipsec_map interface card crypto outside
gbnltunnel card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
backup of crypto gbnltunnel interface card
Crypto ca trustpoint ASDM_TrustPoint0
Terminal registration
name of the object CN = GBNLVPN.greatbrandsng.com, O = GBNL, C = ng
Configure CRL
Crypto ikev1 allow inside
Crypto ikev1 allow outside
Crypto ikev1 enable backup
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
enable client-implementation to date
!
track 10 rtr 100 accessibility
!
Track 100 rtr 10 accessibility
Telnet 192.168.200.0 255.255.255.0 inside
Telnet 192.168.202.0 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.202.0 255.255.255.0 inside
SSH 192.168.200.0 255.255.255.0 inside
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 0.0.0.0 0.0.0.0 backup
SSH timeout 30
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management-access inside
a basic threat threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
WebVPN
allow outside
enable backup
activate backup2
internal gbnltunnel group policy
attributes of the strategy of group gbnltunnel
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
greatbrandsng.com value by default-field
Group Policy 'Group 2' internal
type of remote access service
type tunnel-group gbnltunnel remote access
tunnel-group gbnltunnel General-attributes
address GBNLVPNPOOL pool
Group Policy - by default-gbnltunnel
gbnltunnel group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group GBNLSSL remote access
type tunnel-group GBNL_WEBVPN remote access
attributes global-tunnel-group GBNL_WEBVPN
Group Policy - by default-gbnltunnel
tunnel-group 196.216.144.1 type ipsec-l2l
IPSec-attributes tunnel-group 196.216.144.1
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
HPM topN enable
Cryptochecksum:6004bf457c9c0bc1babbdbf1cd8aeba5
: end
When you say that "the external interface is downwards using failover techniques" you mean this failover occurred because the ASA is no longer able to reach the 31.13.72.1? Not that the actual interface is broken?
If this is the case, then the NATing is your problem. Since you're using the same VPN pool for VPN connections the ASA cannot distinguish between the two streams of traffic if the external interface is still in place. The SLA tracking only removes a route in the routing table, but does not affect what happens in the NAT process.
try to change the NAT statement follows him and the test (don't forget to remove the other statements to exempt of NAT for this traffic during the test):
NAT (inside,any) static static source NETWORK_OBJ_192.168.30.0_25 destination DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.30.0_25
If this does not work, I would either turn off the external interface when a failover occurs, or create a second connection profile that contains a separate mass of IP for the VPN connection and ask users to connect using this profile when a failover takes place. Don't forget to create Nat exempt instructions for this traffic also.
--
Please note all useful posts
-
AnyConnect VPN connection VPN site access to remote site
I need our VPN users to gain access to our remote site (Site to Site VPN), there is no problem to access the main site through the VPN. Crypto map sites have the VPN pool in the card encryption.
Any ideas?
Here is the main Site (ASA5520) config inside 192.168.50.0
crypto_vpn_remote-site access-list extended ip 192.168.50.0 allow 255.255.255.0 172.16.1.0 255.255.255.0
IP 192.168.99.0 allow Access-list extended site crypto_vpn_remote 255.255.255.0 172.16.1.0 255.255.255.0
inside_nat0_outbound to access extended list ip 192.168.50.0 allow 255.255.255.0 172.16.1.0 255.255.255.0
access extensive list ip 192.168.99.0 inside_nat0_outbound allow 255.255.255.0 172.16.1.0 255.255.255.0
Remote site (PIX 515E) inside 172.16.1.0
access-list crypto_vpn_main-site permit ip 172.16.1.0 255.255.255.0 192.168.50.0 255.255.255.0
access-list crypto_vpn_main-site permit ip 172.16.1.0 255.255.255.0 192.168.99.0 255.255.255.0
access-list sheep permit ip 172.16.1.0 255.255.255.0 192.168.50.0 255.255.255.0
access-list sheep permit ip 172.16.1.0 255.255.255.0 192.168.99.0 255.255.255.0
VPN (AnnyConnect) 192.168.99.0
On the main site, pls make sure that you have 'same-security-traffic permit intra-interface' active.
Also, if you have split tunnel configured, please also make sure that he understands the Remote LAN (172.16.1.0/24).
Hope that helps.
-
AnyConnect VPN connected but not in LAN access
Hello
I just connfigured an ASA to remote VPN. I think everything works but I do not have access
for customers in the Local LAN behind the ASA.
PC <==internet==>outside of the SAA inside<=LAN=> PC
After AnyConnect has established the connection I can ping inside the Interface of the ASA
but I can't Ping the PC behind the inside Interface.
Here is the config of the ASA5505:
: Saved
:
ASA Version 8.2 (1)
!
asa5505 hostname
activate 8Ry2YjIyt7RRXU24 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 192.168.178.254 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
Shutdown
!
interface Ethernet0/3
Shutdown
!
interface Ethernet0/4
Shutdown
!
interface Ethernet0/5
Shutdown
!
interface Ethernet0/6
Shutdown
!
interface Ethernet0/7
Shutdown
!
passive FTP mode
Inside_ICMP list extended access permit icmp any any echo response
Inside_ICMP list extended access permit icmp any any source-quench
Inside_ICMP list extended access allow all unreachable icmp
Inside_ICMP list extended access permit icmp any one time exceed
access-list outside_cryptomap_2 note ACL traffic von ASA5505 zur ASA5510
outside_cryptomap_2 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.0
no_NAT to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.0
no_NAT to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.178.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.1.0 255.255.255.0
pager lines 24
Within 1500 MTU
Outside 1500 MTU
mask 192.168.1.10 - 192.168.1.15 255.255.255.0 IP local pool SSLClientPool
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access no_NAT
NAT (inside) 1 192.168.1.0 255.255.255.0
Access-group Inside_ICMP in interface outside
Route outside 0.0.0.0 0.0.0.0 192.168.178.1 1
Route outside 192.168.10.0 255.255.255.0 192.168.178.230 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication http LOCAL console
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set-3DESSHA FRA esp-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto outside_map 2 match address outside_cryptomap_2
peer set card crypto outside_map 2 192.168.178.230
card crypto outside_map 2 game of transformation-FRA-3DESSHA
outside_map interface card crypto outside
Crypto ca trustpoint localtrust
registration auto
domain name full cisco - asa5505.fritz.box
name of the object CN = cisco - asa5505.fritz.box
sslvpnkeypair key pair
Configure CRL
Crypto ca certificate chain localtrust
certificate fa647850
3082020b a0030201 30820174 020204fa 0d06092a 64785030 864886f7 0d 010104
0500304 06035504 03131763 6973636f 617361 35353035 2e667269 2d 3120301e a
747a2e62 6f783126 30240609 2a 864886 f70d0109 02161763 6973636f 2d 617361
2e667269 35353035 747a2e62 6f78301e 170d 3132 31303132 31383434 31305a 17
323231 30313031 38343431 06035504 03131763 6973636f 3120301e 305a304a 0d=LAN=>==internet==>
617361 35353035 2e667269 747a2e62 6f783126 2a 864886 30240609 f70d0109 2D
6973636f 02161763 2d 617361 35353035 2e667269 747a2e62 6f783081 9f300d06
d6279e1c 8181009f 092a 8648 86f70d01 01010500 03818d 30818902 00 38454fc 9
705e1e58 762edc35 e64262fb ee55f47b 8d62dda2 102c8a22 c97e395f 2a9c0ebb
f2881528 beb6e9c3 89d91dda f7fe77a4 2a1fda55 f8d930b8 3310a05f 622dfc8f
d48ea749 7bbc4520 68 has 06392 d65d3b87 0270e41b 512a4e89 94e60167 e2fa854a
87ec04fa e95df04f 3ff3336e c7437e30 ffbd90b5 47308502 03010001 300 d 0609
2a 864886 04050003 81810065 cc9e6414 3c322d1d b191983c 97b474a8 f70d0101
2e5c7774 9d54d3ec fc4ee92d c72eef27 a79ce95a da83424f b05721c0 9119e7ea
c5431998 e6cd8272 de17b5ff 5b1839b5 795fb2a0 2d10b479 056478fa 041555dd
bfe3960a 4fe596ec de54d58b a5fa187e 5967789a a26872ef a33b73ec 7d7673b9
c8af6eb0 46425cd 2 765f667d 4022c 6
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
management-access inside
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
localtrust point of trust SSL outdoors
WebVPN
allow outside
SVC disk0:/anyconnect-win-2.3.0254-k9.pkg 1 image
SVC disk0:/anyconnect-wince-ARMv4I-2.3.0254-k9.pkg 2 image
enable SVC
tunnel-group-list activate
internal SSLClientPolicy group strategy
attributes of Group Policy SSLClientPolicy
VPN-tunnel-Protocol svc
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
the address value SSLClientPool pools
WebVPN
SVC Dungeon-Installer installed
time to generate a new key of SVC 30
SVC generate a new method ssl key
SVC request no svc default
username password asdm privilege Yvx83jxa2WCRAZ/m number 15
hajo 2w8CnP1hHKVozsC1 encrypted password username
hajo attributes username
type of remote access service
tunnel-group 192.168.178.230 type ipsec-l2l
IPSec-attributes tunnel-group 192.168.178.230
pre-shared-key *.
type tunnel-group SSLClientProfile remote access
attributes global-tunnel-group SSLClientProfile
Group Policy - by default-SSLClientPolicy
tunnel-group SSLClientProfile webvpn-attributes
enable SSLVPNClient group-alias
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:0008564b545500650840cf27eb06b957
: end
What wrong with my setup.
Concerning
Hans-Jürgen Guenter
Hello Hans,.
You should change your VPN pool to be a different subnet within the network, for example: 192.168.5.0/24
Then configure NAT exemption for traffic between the Interior and the pool of vpn.
Based on your current configuration, the following changes:
mask 192.168.5.10 - 192.168.5.15 255.255.255.0 IP local pool SSLClientPool
no_NAT to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
And then also to enable icmp inspection:
Policy-map global_policy
class inspection_default
inspect the icmp
-
VPN connection to the remote desktop
My company has recently introduced a new VPN system for remote access to the desktop. The old VPN worked well with my computer at home. Now I thought that "Critical Patch KB2115168 must be installed" in order to connect remotely. Many other patches were also shown as being mandatory. My company seems unable to solve this problem that many employees know when they attempt to connect remotely with the office. Please notify.
Hello
I suggest you according to the question in this forum and check if that helps:
http://social.technet.Microsoft.com/forums/en-us/winserverNIS
It will be useful.
Maybe you are looking for
-
Can't use Firefox once after reboot my Mac, then he won't.
After reboot or a total, followed by the setting stop running, I get use of Firefox. Once I close out of it, I can't hire back in.I checked and updated Firefox, no help. I am currently running Yosemite on my Mac.
-
Error: "your credit card was refused.
Dear Customer Service:It's very frustrating for me. Keep my Visa account is declined at Apple. I used this same on Amazon Visa card without problem. I checked my State for. I got an error "your credit card was denied" when I touch in my Visa account.
-
My mouse to walk across the screen
Why my mouse wander through the screen on its own? It is possessed or something!
-
Re: Satellite 1900 - drivers XP need
Hello We have a laptop Toshiba Satalite who doesn't have any CD driver model number - PS192E-00G1N-FR It seems there is no driver on the Web from Toshiba europes for this model site, can anyone help please? Thanks in advance
-
After sorting on the bad memory modules causing sporadic restarts my system is always showing behavior strange but much more less than before... Sometimes the laptop restarts when I work with her without warning, this happens maybe once every 3 days