Apex Certified Developer exam - hold your horses until 5 Apex came out?

Similar Questions

• Keep your PC until it is done. Updated 27 47

  My laptop Acer Aspire V5-571 is running Windows 8.1 and hung up during an update for about 4 hours now. When I shut down and restart using the power button, it returns the same blue screen with the circle of rotation points, displaying the message "keep your PC until this." Updated 27 of 47 "installation. The keyboard and the touch screen do not respond. I'm running Avast free antivirus and do not any recent change in hardware or software. Basically I can't do anything with the laptop at this point. How can I get out of this situation?

  Hello Yann,

  Thank you for your response. I waited about a day for the update to restart, but the locked condition has not changed. The PC was completely insensitive to the keyboard and the touch screen. Then, I did what you are not supposed to do and powered down and back up with the power button. That I go back to the previous message without change. Then, I turned off the PC and removed the battery for about 10 minutes, thinking I had nothing to lose. When I reinstalled the battery and powered, the update is resumed at the 27 update and finished.

  I guess the update file has been altered because of our internet connection is slow. The PC seems to work normally since the update.

• Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

  Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

  Hello...

  Force restart your iPhone > press on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  Then try to add a card again > define and use the Apple pay on your iPhone

  And make sure your bank / card is accepted for use with pay Apple > Apple pay participating banks and store card

• Developer SQL 4.0.1.14 - connections are grayed out (?)

  I have several 'connections' in my SQL Developer 4.0.1.14, and most of them are "grayed out". A couple are bold' no black.

  Greyed out connections work well. I can click one, work, (re) connect, test, run SQL without any problem.

  Is there a (new) reason why SQL Developer would present some of my connections as grayed out?

  OK, the connections have colors.

  For each connection you select, RMC (right-click) and choose Properties. On the pane of the properties of the connection, as well as the password and other properties there is a widget called "color of connection." Clicking on the widget to change/select the color.

  The connection color widget is to the immediate right of the password field.

  You will need to choose "Save" after you (re) set the color of a connection.

  By clicking on "off" this connection will show you the new color of connection in the Connections pane. I don't know yet how designate the presentation as "BOLD" for a color of the provided connection.

  Don't forget to choose "Save".

• Need advice on OCA PL/SQL Developer Exam

  Hello
  
  I wrote exam 1Z0-007 and was planning to write 1Z0 - 147 next Saturday.
  
  But I came across the post here in this forum that Oracle University will soon release a new option of the review for those pursuing the Oracle PL/SQL Developer certified associate (IBC) or certifications Oracle Advanced PL/SQL Developer Certified Professional (OCP).
  
  And the test will be offered as an alternative to taking existing exam 1Z0-147 (PL/SQL program) in the ways of Oracle Advanced PL/SQL Developer Certified Professional (OCP) and Oracle PL/SQL Developer Certified Associate (OCA) certification.
  
  So, what should I do now?
  
  Should I go ahead and take the exam next week or otherwise?
  
  Looking forward to your answers.
  
  Thank you.

  Brandye Barrington

  I went through this site
  http://education.Oracle.com/pls/web_prod-PLQ-dad/db_pages.GetPage?page_id=41&p_org_id=1001&lang=us&p_exam_id=1Z0_147...

  Follow the procedures and rules.
  Thanks for the advice in a timely

  Thank you
  Billon

  Published by: Bhaskar.k on April 21, 2009 03:27

• Siebel 7.7 analytics application Developer Exam

  I am interested in getting certified in Siebel Analytics (developer, server, etc.). But I trained by non-oracle Institute. Is it possible for me to go to this review?
  
  Because Oracle is stressing that everybody should be trained through established training Oracle. Is this rule still in effect?
  
  Thank you

  Christian Berg wrote:
  [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=165&p_org_id=28&lang=US]

  From the official page, you can see that 1Z0-620 should not be able to pass the certification. "Analytics: developer of applications (Siebel 7.7)" and "Analytics: Advanced Application Developer (Siebel 7.7)" are recommended, but not required to take the exam (or the equivalent in OBIEE/A). So, theoretically, you can go for certification as soon as you have finished 1Z0 - 620.

  See you soon,.
  C.

  This is not how I read the information on this page. You can also read + "due to the scarcity of the Siebel 7.7 Analytics course, Oracle Certification will accept Oracle BI courses toward certification of analytics. However, please remember that Siebel 7.7 Analytics courses remain the best way to prepare for these exams and courses Oracle BI can help not sufficiently prepare candidates. » +

  This means for me, you must have either followed courses of Siebel Analytics, or at least one of the new courses of Oracle BI (from Oracle University course) for the certification.

• How to: free account developer to test your own iOS on iPhone application using Xcode 7.2.1

  The free Xcode 7.2.1 iOS Developer membership feature I'm trying, I have installed xcode 7.2.1 and tried to test self written objective c code on my own in iPhone 5 s ios9.0.2.

  The sequence of error occurs as follows:

  (1) no signing identity valid (certificate and private key pair) have been found.

  Xcode can try to solve this problem. This will reset your signature code and parameters of provisioning of recommended values and solve problems with the signature of the identities and provisioning profiles.

  I clicked on the button "deal" and

  2) clicked "ADD" an APPLE ID account 'sign using the Apple ID ". I sign in using exist before APPLE ID.

  (3) the error said: an unexpected error has occurred. Please try again.  If the problem persists, contact the support of the Apple Developer program. https://developer.Apple.com/support

  No signature found identity code: no valid signature identity (certificate and private key pair) have been found.

  (4) I repeat the above steps, but mistakes persist.

  After failed attempts, I tried the steps of Xcode 7.2.1 still 3 days later using Apple ID sign. I could create IOS developer cert for free using Xcode > Preferences > ADD apple ID.

  I was able to compile the code and to load an app on my own device. Here are a few observations try this developer account "Apple ID sign" free:

  (1) the need to activate the WiFi on my a device and connect to a network to check your application before can run the application. Cannot run app offline.

  (2) there is no debugging, stepping in/out plus. Only can run application without debugging.

  Does anyone have any other comments?

• ColdFusion 9 certified developer study guide

  I find a large number of downloads of software (at a cost of course) for the ColdFusion Certification.  Can someone help me with the best route to go for ColdFusion 9 certification preparation and how they have prepared for it.  Advice on the preparation of the trial and the trial itself.  I found a book entitled, "ColdFusion MX 7 Certified Developers Study Guide", but nothing about CF8 and CF9.  Do you think that this book would be beneficial in preparing the CF9 certification?  Any thoughts or ideas would be greatly appreciated.  If anyone out there has received their certification yet and if so how many time you must devote to prepare for the exam. Thank you.

  Who is on site. Don't worry with the CF8 guide as there is nothing here that isn't in the CF9 one. Read the sections 'ColdFusion functions' and 'ColdFusion tags', as well as the reference 'Application.cfc '. That should give you a grounded just in the review.

  O.

• What can I do? My computer screen says ´keep your PC until it is done. Installing Update 2 of 2. ´

  It has been like this for ten hours, I don't know what else to do. When I stopped and then turn it back on nothing changes. Help, please!

  Hi Nicole,.

  I would like to know some information about this problem so that we can help you further.

  1. are you able to boot to the desktop?

  2. do you have support for Installation of Windows 8?

  3. have you connected external devices other than the keyboard and mouse?

  If you are able to boot to the desktop, then I would suggest trying the following methods and check if it works for you.

  Method 1:

  Try the procedure described in the following Microsoft Support article and check if that helps.

  Windows Update crashes when installing updates in Windows 8, Windows 7, or Windows Vista

  http://support.Microsoft.com/kb/2700567/en-us

  Note: When you use the 'Refresh your PC' tool, your computer will render you the current Windows installation to the original installation version. This method requires you to reinstall all updates that are not on the installation. Applications that you have installed the drives or Web sites will be removed. You will find a list of applications on your desktop.

  Method 2:

  Restore to restore the date before the problem started with the help of the system and check if the problem persists.

  How to refresh, reset or restore your PC:

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  Note: refer to the section "restore your PC to an earlier point in time." the steps also apply to Windows 8.

  See also the following Microsoft Help article.

  http://support.Microsoft.com/kb/949358/en-us

  Note: try the steps that are applied to Windows 8.

  Note: After the clean boot troubleshooting step, refer to the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link to return your computer to a Normal startup mode.

  Please reply with the status of the issue so that we can better help you.

• Holding an effect until the display

  Hi people,

  I have a slide with three buttons. I use advanced actions to display different information for each click of a button. It works fine, except that I can't use any entry effects when they proved the information. I suspect it's because the effect has already played, but because the information was hidden you cannot see it. So my question is does anyone know a way to maintain the effect until the button is pressed?

  See you soon,.

  Steve

  Nevermind, I just answered my own question :)

  See you soon

  Steve

• Solaris review form (Oracle Solaris 10 System Administrator Certified Professional Exam)

  Hello

  In the coming days I will try on review of Solaris 10. Have some questions about the examination form (I couldn't find it on the Oracle's Web site):

  1. is there a test multiple choice with indication in each question how many answers are correct?

  2. is it possible to spend issues during the review and come back later for those whom I don't know?

  3 are the results given just after or later

  concerning

  Pete

  2698137 wrote:

  Hello

  In the coming days I will try on review of Solaris 10. Have some questions about the examination form (I couldn't find it on the Oracle's Web site):

  1. is there a test multiple choice with indication in each question how many answers are correct?

  2. is it possible to spend issues during the review and come back later for those whom I don't know?

  3 are the results given just after or later

  concerning

  Pete

  Make sure that you have identified the review you are willing to take, he associated subjects and associated certification, you want to accomplish on the certification website: http://certification.oracle.com (I remember without even researching it 2 Solaris OCP exams; but an upgrade would be one).

  Make sure how recorded on Pearson VIEW and related to certview and have a test id oracle

  ....

  The exam will be multiple choice.  Sometimes it will tell you how many answers are required, sometimes he can say brand is correct.

  You will be able to right click on the answers that you know are bad for you help focus you on the right answers.

  You then and you previous time through questions if you need... but he may lose. (there is a slight delay as loading issues).

  You can mark a top case HR points you need to review.

  You can go to the final screen...  (The Pearson VUEscreen is a little different on-screen prometric that can present a few books).

  -If you answered no to all questions (e.g. you scored 2 responses where 3 should be...) (une erreur courante de la mienne)... or graying the wrong answers but forgetting to mark the right one)... then you have the opportunity to review unanswered questions (if you answered them what does not appear).  You have the possibility to examine all questions marked or review questions... or maybe skip back to a question.  (you would have noted it on a dry marker Board they gave you).

  You will have 15 minutes to review a few screens briefly tell you about that at the beginning... take the time to read.  (It is even possible tomorrow is the day that something changed... who knows?)

  In general:

  During the introduction double-check the number of questions and given time and check every 10/15 minutes you are on time.

  Do not spend too much time on something you don't know

  You can't leave or best estimate and trademark issues.  Probably only goal for re go more questions at the end.

• This product has met a problem whick requires that you restart your computer until you can run.  If you continue to see this message after you restart your computer, please contact your support of Adobe technicaln or administrartor IT

  I get this window when you try to open Photoshop CS4 (64 bit):

  =====================================================

  This product has encountered a problem which requires that you

  Restart your computer before you can run.

  If you continue to see this message after restarting your computer, please

  Contact your COMPUTER administrator or Adobe technical support to help you,

  by mentioning the error code displayed at the bottom of this screen.

  Error: 148: 3

  http://www.Adobe.com/support/

  ======================================================

  What should I do next?

  Try this:

  Adobe - Adobe licensing repair tool

  Melissa

• Reuse OCA Administrator/Developer exam

  Hi guys,.
  
  I was just wondering if 11g SQL Fundamentals could be used to extract the OCA as administrator & developer roles or if you can use it for a. Such a thing would be able to get the 2 only 3 reviews... possible OCA skills?
  
  Mike

  If you check the links below you can see how someone off 1Z0-007, 1Z0-047 or 1Z0-051 can be used to achieve OCAs either as a developer to DBA. In fact, you can aim for 1Z0-047 (database Oracle 11 g SQL Expert) and win 3 titles from 3 trials.

  OCA Dev:
  http://education.Oracle.com/pls/web_prod-PLQ-dad/db_pages.GetPage?page_id=155
  OCA Admin:
  http://education.Oracle.com/pls/web_prod-PLQ-dad/db_pages.GetPage?page_id=198&p_org_id=&lang=

• Hold a pulse until you get a new

  I want to do something very simple, but that gives me a lot of work.

  "I want to just turn on a LED with a"toggle switch"with a mechanical action" lock up to release "and keep what led up to a new Pulse (with the same" toggle switch"). I know it is very simple, but is a principle that will clarify a lot of things for me.

  If you can send me a VI, would be great.

  Sorry for my bad English, it is not my mother tongue.

  Thanks to you all!

  Are you talking about a LED on the front panel or a true LED?

  What do you mean by "pulse" and where it came from?

  If you want a version of the software, and the "pulse" is just another pressure on the latch action button, use a while loop that contains a structure of the event and a registry change. Initialize the who shift with a constant false pattern and place the Terminal LED inside the loop. Use an event structure with "switch... changed value" and reverse the Boolean value inside of her she's in a hurry. the lead of the right shift register. Well, there are other ways to do it. Try to find them all.

• "You need to update you date of birth in your account until you can buy this game."

  I get the above message whenever I try to do anything through the app store for Windows. I went on my Microsoft account and changed my DOB for my real, but the message is not endangered.

  Any ideas? Pretty frustrating.

  Hello James,.

  Thank you for writing to us, we are happy to help Microsoft Community.

  Before you start with the troubleshooting steps, I would ask you to answer the questions below:

  1. This prompt is displayed with all the apps/games you try to download using Windows Store?
  2. The game you are trying to download?

  Ideally, you should be able to download games and applications using Windows Store once you update the information in the Microsoft Account.

  This problem can occur if the game is limited, the region-based age, you're a few games & apps are limited by download if the criteria of age does not.

  Answer so that we can help you further.