AppSetRollbackOnlyException + strange acting sequence

Similar Questions

• Skype is strange acting

  Then I signed this morning on my desk and open Skype as I normally always like every other morning. However, the program crashed and made me restart. The next thing I know, is that everything is weird.

  I was talking to one of my friends via our chat and there were several things that have happened that have extremely frustrated me.
  -J' open Skype when I received the message but when I saw that the message would not disappear until I answered. Is the same for other groups that I normally don't answer.
  -Their messages appeared above the mine when they you respond to my last post. Normally just like any cat he should appear below and he always does this.

  I tried to restart my office so much also to restart Skype but the problem does not resolve itself and it's extremely frustrating. It was working fine last night and now all of a sudden does not this 'thing'.

  Please help because it is do the things I normally would at this time.

  It is a well known bug in the latest version of Skype 7.17.

  Uninstall this version and install the older version of Skype 7.16.0.102 using this Setup program:

  http://download.Skype.com/MSI/SkypeSetup_7.16.0.102.msi

• I deleted some computer now of strange acting programs. But also done an AVG tuneup pc same day...

  In an attempt to clean and optimize my computer, two days ago I installed AVg PC TuneUp and went through all of htat eleemnts program to optimize my computer.
  In addition, I went into Add/Remove programs and demolished a bunch of stuff that was "rarely". This figure includes some different MSXML 4.0 type things like well asMS framework for user mode driver.
  This morning when I woke up my computer in a few minutes the computer froze and when I restarted manually a function all on its own when in the start of the screen, he began to run something that said:
  Checking file system on C:
  the type of file system is NTFS.
  A disk check has been schelduled
  Widnows wil now check the disk.
  CHKDSK checks the files, security index descritions, usn journal
  data file, free space... and it is still ongoing.
  And when I restart the computer, it automatically restarts this analysis from the beginning.
  So, I don't know if it's because I remove programs or if the AVG changed my system somehow

  Hello

  1. the problem occurs in safe mode?

  I suggest you to try the steps below and check if they help to resolve the issue.

  Chkdsk.exe or Autochk.exe starts when you try to shut down or restart your computer: http://support.microsoft.com/kb/831426

  For your reference: How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

  Hope this information is useful.

• Sidebar strange acts

  I have 2 user accounts. When I use the 1 (admin) account, the sidebar works fine. But when I change account 2, the sidebar is not exposed in what it is. Something you are missing something.

  I captured what it looks like.

  http://img.Photobucket.com/albums/v208/devilpig/Kelvin01/111.jpg

  1. I deleted the file settings.ini, no work.
  2. I run regsvr32 msxml3.dll, regsvr32 scrrun.dll and regsvr32 jscript.dll, no work.

  How could I solve this problem?

  Have a look at this tutorial. The clock resembles that of your screenshot.

  http://www.Vistax64.com/tutorials/161046-Windows-Sidebar-gadget-not-displayed-correctly.html . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• zone recovered win7 won't let me put in DST and window different scrolls strange acts please help

  recovered data to dell key win7 and I had to load a bunch of update would have this effect of programs

  Hi Vivremm,

  1. what happens when you try to change the date and time are you get any message of error?

  2. what exactly is the problem we are facing with Windows?

  No update of Windows, to keep your PC safe and running smoothly.

  There are different types of updates. Critical updates or security updates protect against malware and security exploits vulnerabilities. More updates, correct the errors that are not related to security, or enhance the functionality.

  Each time a new update is essential to avoid a newly discovered operation or prevalent targeting Windows users. Windows Update can be configured to install updates automatically as long as the computer is connected to the Internet

  I recommend you to check the date and time, see the procedure in the following article.

  Change the display of dates, times, currencies, and measures

  Please provide us with more information about the issue so that we can better help you.

• Spot Healing Brush strangely acting as a cloning tool

  I removed the text in the speech bubble below, then I applied the Spot Healing Brush to remove the character surplus lines.  Bubble's pink gradient background color, and that's what I expected to see after my request for spot Healing Brush, not weird images from body of the Lady.

  

  Nice work! Glad that you understood. Yes, by sliding autour can cause a little problem sometimes

  Benjamin

• Some strange acting tools

  Sometimes that my tools are transformed into a simple cross, all except the magnifying glass, hand tool, path/direct access selection tools and text tool. I use CS5 now, it happened also when I used PS Elements 4. If I open a new document, all the tools are normal, but if I open one that I worked with, the problem appears. Why is this happening?

  This is generally caused/fixed with the happy button.

• Sequence after import via DataPump behavior

  Hi friends,

  I'm under Oracle DB 11.2.0.3 on Windows 2008 R2 SP1 servers and I faced a strange behavior sequences after importing a schema via Data Pump.

  The export is done in this way:

  EXPDP userid/password dumpfile = logfile = directory = remap_dumpfile = y (no news)

  Importation is made this way

  IMPDP userid/password dumpfile = logfile = directory = =(old_one:new_one) remap_tablespace = remap_schema (old_ones:new_ones, so on...)

  Import works fine. There is no errors and the sequences are thus imported without warning.

  Strange behavior, seems that sequences of "reset". When we call a sequence the NEXTVAL is just lower than the values already stored in the database, and we get ORA-00001 much. The sequence should know as vale. I don't have this problem when you use exp/imp, just through DataPump.

  So that when we create an order which will receive the value of 100, for example, because we have 99 commands on the system, Oracle suggests a value less than 99 or even the value number one (01).

  Then, we wrote a script to check the CURVAL of the sequences on the basic scheme to recreate sequences using the initial value on the new imported schema.

  Did anyone face this problem before?

  Any suggestions?

  TKS a lot

  Hello

  You should definitely make the consistent export - is not be default in datapump (although in previous versions, you might think that it was because of misleading him he used to write informational messages).

  You can either use flashback_time = systimestamp, lalshback_scn = xxxxx (where you work on what SNA use) or you are on 11.2 you can even use compatible = y as oracle reintroduced to facilitate upgrades of exp for the people.

  That might solve the problem, but if the number is reset to 1 in some cases it may be another problem.

  See you soon,.

  Harry

• Toshiba Kira sometimes insensitive

  I have the Kirabook i7, supplied with windows 8, but updated to windows 10.

  Works perfectly, but sometimes will be completely immune to the pressures on the keys or by using the power button.

  Battery is fully charged and the power adapter is connected.

  The light on the side flashes white with a strange random sequence.

  In my view, it is in hibernation because a workaround solution that I discovered is now pressed the power for 15-20 seconds to force the switch closed and thereafter it turns well but is probably not good for the computer.

  After advice or solutions

  Thank you

  Hello

  Is your KIRA does not only when stopping down or during normal use?
  Mine gets only does not respond when I try to shut down windows 10 when the machine is left ON for a few hours. If I turn it on, then immediately stops normally.
  I have try this '' correction '' to see if it solves:

  Difficulty

  Have you tried to check the event viewer for clues on what could be the problem?

  See you soon

• Cannot install Anno 2070 error: the installed version of the application could not be determined.

  Original title: Impossible to install Anno 2070

  Hello

  I don't know if this is the right place for questions related game, but I tried the official forum and have had no luck with the solutions presented.

  I've installed Anno 2070 (Ubisoft) and played. By a strange Act of Murphy's law the game no longer works, so I uninstalled and tried reinstalling, but whenever I try to install it, I get this message:
  The installed version of the application could not be determined.
  The installation will end today.
  What can I do?

  Hello

  1. How are you trying to install?

  2. which version of the operating system is installed on your computer?

  I suggest you to try the steps below and check if it helps.

  Method 1: Set up your computer in a clean boot state and then try to install the game.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2: Solve the problems installing and uninstalling the programs on Windows computers. http://support.Microsoft.com/kb/2438651

  If the problem persists, then try to keep in touch with the support of UBISOFT.

  http://www.Ubi.com/us/games/info.aspx?pid=9651

  Hope this information is useful.

• 4.52 AC and 5.02 crashes durning a new profile creation.

  Hello

  my ThinkPad: Z61m 9450-GDG

  Fresh Windows XP Professional with SP3 I have strange acting AC and system update.

  1. access connection when I try to add a new profile first screen where I put the name offline is well, I put the seting Wireless and when to push then had access Conection GUI windows error. "acmaingui.exe.

  It happened AC 5.02 and 4.52.

  Update: when I connectet to the specified network, I can create a profile for this network.

  2. system update - shows nothing to install but he must propose the update for AC. I installed 4.52.

  Keff hell,

  have you tried this method? Seems that firefox user profile is causing this behavior.

  Please try to rename prefs.js of Firefox. In your FF profile folder.

  AC wrote in prefs.js of Firefox when you create a new profile.

  Where prefs.js is great, AC will crash.

  But you may lose some Firefox settings, if you rename it, who are in the prefs.js.

• Keyboard X61s sending multiple scan codes.

  Hello

  I me this afternoon asked to watch a x61s who has a strange acting keyboard. Press gives mostly the key more than 2up and 1down1right (so produced ZA1).

  This laptop was apparently used to play music in a steamy bathroom one day before the problems started.

  Ive of measures taken

  1 start in the pre-installation environment. problem persists.

  2. removed keyboard, connectors checked & cleaned, replace the keyboard. problem persists.
  3 starts in pc-doctor (on the lenova support site), ran keyboard 'keys' interactive test. Shows the same keystrokes as described above.
  4 Ran System Board/keyboard test diagnosed, managed.

  Can I be sure that a replacement keyboard will solve this problem? Setting for family so don't want to let them spend the money if it won't solve the problem.

  Ive just checked online and its 3 months warranty

  Any advice would be great

  With the help of PC-Doctor, I can give a good explanation of what codes each key is sending.

  Certainly, if I had the machine, the first thing I would try is to replace the keyboard. I also saw the same problem corrected by the replacement of keyboard. It is VERY likely that the problem is the keyboard, but not 100%.

• BlackBerry Smartphones can only synchronize only Contacts and calendar?

  I wanted to replace my Palm Treo with the new BlackBerry 8310.  With the Palm, I could synchronize my calendar and contacts with Lotus Notes 7 through a 3rd party software without going through courier service.  It does not appear that I can install the BlackBerry software without e-mail service because he was unable to access Lotus Notes data.  Any suggestions?

  Thanks for the help of glasses bifocals!  I used Palm products so far and with this being my first BlackBerry device, I'm a novice user.  Your advice was helpful.  I did download the latest version of the Desktop Manager (4.6).  The LNOptions.dll with the 4.6 ends by works very well.  I found that I needed to open Desktop Manager then plug my 8310.  It's not as long as the phone is connected, I could set up my syncroization correctly.  Strange little sequence there, but you sent me down the correct path.

  Thanks again,

  Doug

• Reset the user database after the removal of field

  Hello

  We use ES2.5 and we discovered this strange Act of user database. We have a Web service that gets the data user of LiveCycle. He former users are displayed that was stored in the old domain I already deleted the directory of the user.

  So... is there a way to reset the user database?

  Floh Cu

  I just idea... I've recreated the field again with the same ID/name but without the directories and resynced the field. Now, all the old users are marked obsolete.

• Pesonalizations forms 'View' without access to forms

  Hello
  
  We have a situation where the functional team would need to view customizations of forms on special forms (for most non-HTML forms) in R12.0.6, but did not have access to forms and certainly will not have access to the password apps (in production and non-production instances). Go see customizations through the interface user is not an option.
  
  Is there a handy query that we can run a toad that would give us this information? I guess it would be stored in fnd tables somewhere if anyone knows the actual tables?
  
  Any help will be most appreciated!
  Sasha

  Try this... he should at least give you a starting point and I'm sure that you can tailor/extend to your own needs.

  Kind regards
  Jon

  SELECT
  RUL.form_name - name of the form
  , rul.function_name - name of the function
  , rul.sequence - seq
  , rul.description - description
  , decode(rule_type,'F','Form','A','Function','') as plevel - level
  rul.enabled - active
  -CONDITIONS
  , rul.trigger_event - triggering event
  , rul.trigger_object - object trigger
  , rul.condition - condition
  , rul.fire_in_enter_query - processing mode
  -CONTEXT
  decode(sco.level_id,'10','Industry','20','Site','30','Responsibility','40','User','???') as context_level
  -ACTIONS
  act.sequence as action_seq
  act.property_value
  act.argument_type
  act.target_object
  decode(act.action_type,'P','Property','M','Message','B','Builtin','M','Menu','') as action_type
  act.enabled as act_enabled
  act.object_type
  act.message_type
  act.message_text
  act.summary
  act.builtin_type
  act.builtin_arguments
  act.language
  act.property_name
  Act. MENU_ENTRY
  act.menu_label
  act.menu_seperator
  act.menu_enabled_in
  act.menu_action
  act.menu_argument_long
  act.menu_argument_short
  Of
  fnd_form_custom_rules rul
  fnd_form_custom_scopes sco
  fnd_form_custom_actions Act
  WHERE 1 = 1
  AND rul.id = sco.rule_id (+)
  AND rul.id = act.rule_id (+)
  AND there are (select "is" the PRP fnd_form_custom_prop_list where act.object_type = prp.field_type)
  ORDER BY
  RUL.form_name, rul.function_name, rul.sequence, act.sequence