AppStore will not connect, so can't update/update

Similar Questions

• My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  Not knowing what the 'followed the steps posted' have been

  The iOS device connects to other networks? If Yes, which tends to indicate a problem with your network.

  The iOS device sees the network?

  Error messages?

  Other devices connect now?

  The iOS device has connected before?

  Try the following to rule out a software problem:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Power off, then back on your router

  . - Reset network settings: settings > general > reset > reset network settings

  - iOS: troubleshooting connections and Wi - Fi networks

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  - iOS: recommended for WiFi routers and access points

  -Restore from backup. See:

  iOS: how to save

  -Restore factory settings/new iOS device.

  If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• WIFI on my C850 Satellite can detect the network but will not connect

  I just bought a satellite C850 - PSKCCA-02D00M

  The connection to the LAN works fine however the Realtek RTL8723AE without wireless/Bluetooth will not connect to the network. It can can detect them just does not connect. I used the troubleshooting, and he cannot sort.

  All other devices connect very well as Iphones and Kindle

  In the config is doctor says that the adapter is enabled in a domain and in the adapter another status is down.

  I took back to the initial power and installing and unistalling and reinstalling the adapter using the driver on the website.

  Any help is welcome. I don't want to have to take back just for this issue

  See you soon

  Your WLAN is locked? Can you connect WIFI if you delete the WIFI password for two minutes?
  Have you tried to reboot your router?

• my computer does not download an update of Microsoft works 9 KB2092914 (definition 1.89.660.0) since last month. Tried everything. Will not download. Can you help me?

  my computer does not download an update of Microsoft works 9 KB2092914 (definition 1.89.660.0) since last month.   Tried everything.  Will not download.  Can you help me?

  Gray

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47

  Please let us know if that helps.

• My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session?

  My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session? I tried the safe mode and do a system restore, which get rid of it. And suggestions? Thank you.

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get an error code?

  Follow the mentioned article:

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Hope the above information is helpful.

• black screen and nice white cursor and Ctrl alt del will not work, I can not update shell

  black screen and nice white cursor and Ctrl alt del will not work, I can change the shell to the Explorer, but I can't unload or load the hive, what should I do?

  Hello

  Your question I know that some of these methods is not available now, however, all
  Convenience store is included just in case where win you some access as you try to solve the problem.

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• iPod Touch will not connect to iTunes

  My iPod Touch will not connect to iTunes. When I connect it to my laptop with the cable my laptop USB recognizes the iPod begins to charge and 10 Windows asks me if I want to open it to view files, but it seems to treat it as a camera and I just want to know if I want to get pictures on it and on the laptop.

  I made sure I have the latest software updates on the iPod and iTunes and thought this would fix the problem, but iTunes still does not recognize my iPod because it never appears on the Panel for me to sync things for her, etc.

  How can I get my iPod to be recognized by iTunes again? Very recently, it stopped connecting.

  If your computer does not recognize your iOS device, follow the steps proposed by Apple.

  https://support.Apple.com/en-us/HT204095

• Satellite L500 will not connect WIFI (Windows 7)

  I bought a Satellite L500-01W002 running windows 7 for my son for Christmas and it will not connect via WLAN. I use a Linksys WAG54g router/modem. It connects fine via LAN and can see the wireless network, but does not connect. I use WAP-personal security with pre shared key and TKIP. I even turned off all security on the router and he left as an open connection, and it will always just connect.

  I have two Compaq running does not connect Vista connected first to the wireless network, but this thing just. I have uninstalled/updated / re installed device drivers and still nothing, it will be not just connect wirelessly.

  Please someone help me! I know you're out there!

  See you soon

  Hello

  Hmmm strange
  First of all make an update of the BIOS, that this should be done if a newer version is available and you have any questions.

  You said you did a update check WLan if you used the latest version of the driver
  Here you will find the latest WLan driver versions:
  http://APS2.toshiba-tro.de/WLAN/

  You can also check WLan card settings in Device Manager-> properties-> advanced settings WLan card.
  The same WLan channel must be used for the local network and router WLan card.
  Check if the MAC address filtering is not enabled in the settings of the router.

• My Ipad mini will not connect with my wifi at home.  Other devices are able to connect with wifi.  I repeatedly entered the wifi password, but this is not ACCEP it.  Worked very well.  I turned the mini ipad market and nothing.  Help!

  My Ipad mini will not connect with my wifi at home.  Other devices are connecting with the wifi at home.  I turned the mini ipad market a few times and nothing. He recognizes wifi but when I touch the password, it continues to request the password.  Help!  It was working fine earlier in the day.

  What has happened with your iPad since earlier today, when it worked? updated App or iOS? nothing at all

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

• L850 satellite will not connect to Wifi

  Hi, new here.

  I have a Toshiba L850 which does not connect to wifi,
  Many other devices in the House and the L850 was last week.

  You can see my router but will not connect.
  It is the 'limited access' connection, but not more.
  Said troubleshooting couldn't identify the problem.

  When I try and access the Device Manager, I get a "Explorer.EXE" the specified service does not exist as an installed service?

  Help.

  Paul.

  > He sees my router but will not connect.

  I guess that your router is secured by encryption (WEP or WPA / WPA2)
  Test WiFi connection without the use of WLan encryption settings.
  Turn off in the router settings and test the connectivity.

  Of course you need to do that just for test purposes because it s not advised to use the unsecured WiFi.

  Where you have no problem to connect the laptop to 'open' WLan, I recommend changing the encryption type.

• HP 7520: HP 7520 will not connect to the wireless network

  There is some additional information to

  http://forums.Xfinity.com/T5/home-networking-router-WiFi/HP-7520-will-not-connect-to-wireless-networ...

  on this issue.

  Have several APs for a single wireless network allows the printer foolish law.  (Not a Repeater, a second AP connected to the local network with the same configuration of network for security, etc.).

  I solved this problem.  In accordance with the discussion on the link, the problem is that the printer cannot connect to a wireless network if there is greater than 1 for a wireless network (SSID) name wireless access point.

  This thread has had several useful suggestions, but what finally solved the problem, it's the second point has access to a mode where I can create a 'virtual' access point and, above all, a SSID associated.

  Note that not all access points or routers support virtual APs, but this function seems to be more common over time.  Older models is not able to do that.  However, a new access point is sometimes cheaper than a new printer.

  If you do not understand the jargon in the procedure below, I recommend that you find someone who does, then they can do it for you.

  Solution:

  1. On one of the wireless access on the network, create an a new virtual AP with a slightly different name SSID (for example < name of the network - > _1), on the same VLAN (usually VLAN 1).  You may need to put the AP in "multiple AP mode" or something similar, and then restart the AP.  All other settings (DHCP, security, mixed mode b/g/n, etc.) must be the same for the new SSID.
  2. Run the printer Wireless Setup and connect it to this new SSID
  3. Confirm that the printer can be seen by other devices on the network

  Tips:

  • Check the security is the same as the original SSID, Alternatively you can create a vector of insecurity in your network.  Do not WEP-128 when the other SSID uses WPA2 AES, for example.
  • The AP I had had several resets to make it work because of the mode and parameter changes.
  • If you connect the SSID but cannot connect to or be seen by anything on your network, check the new SSID/AP is in the same VLAN as the original.
  • Because the printer is not roaming, and the speed is not a problem for me, I used the access point that could support this solution, which is deeper and slower than my primary AP.  I have not noticed any problems.

  The printer has been reliable on the wireless now on the new SSID, 48 hours.

  I have not upgraded any software on a client of the printer (PC, Mac, phones).

  I think that it is a positive confirmation that the problem is with the implementation of the printer of the stack of network and not with the driver or client software on remote devices.  The 802.11 protocols provide for a network name (SSID) wireless with several access points using different MAC addresses.  I suggest this HP look into this as a potential bug with their network printer for the 7520 protocols stack.

• Bluetooth devices will not connect after a long period of absence

  It started in the last 3 months, I'm not sure of that OS upgrade specifically.  I currently have Version 10.11.3.  I have a MBP late 2011.  I use a keyboard, trackpad and bluetooth magic, bought the same time as my mac.

  Whenever I come back from a business trip (usually a day or two max), my bluetooth keyboard and trackpad will not connect.  They appear in the drop down bluetooth devices, but when I select Connect, nothing happens.  I did everything the new standard batteries, SMC/PRAM reset, nothing helps.  I then manually have to pair them up with difficulty using Set Up Bluetooth Trackpad/keyboard.  It will show "found", then say could not pair.  I have the power on the devices several times his cycle, and then hold the power button 'on' to the pair.  Usually, it takes 5-10 minutes and is terribly frustrating.  Once I get the paired, as long as my stays Mac in the same room with the devices, they pair very well.  Appreciate the advice.

  99 + % of the time, there is a previous event - you indicate that this has been the case for «...» 3 months... »

  What event would it? Upgrade to El Cap? Nothing at all you can think of that has occurred "3 months ago"

• MacBook Pro will not connect to HP OFFICEJET 7500 a

  My MacBook Pro will be not not to connect wirelessly to my HP officejet printer. It worked perfectly for the last 12 months, but suddenly will not connect unless I use the lead. I tried to reinstall using the HP disk but get an error message saying that the installer is not compatible with the operating system. It's weird, because it's the method I used before and I am aware that the operating system is unchanged.  Can you help with this problem?

  Thanks for providing this information Muir1.

  Follow the steps in this document to do a complete uninstall of the printer software.

  Uninstalling the printer software.

  Then download and run the latest drivers for the 7500 a Officejet.

  HP Officejet full feature software and drivers - v10.8 of Mac OS X.

  Let me know how make you out.

  Thank you.

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  What can I do?

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows