Areas of IPSec remote access VPN Login multiple users
Hi, we are currently migrating from an Active Directory, existing to a new domain. We currently use the client for users of Cisco VPN IPSec (ASA5520, version 9.1) software to to connect to VPN, and we have our DCs existing, specified as servers Radius for authentication of the user.
We need to migrate to a new domain within our Organization, using different domain controllers. How can I specify the users in the new domain to be authenticated using a set of domain controllers and users in the existing domain to use another set of domain controllers? This is adjustable by creating a new group policy? I don't see anywhere to specify that. We have to enable authentication of users in both areas during the process of transition, it will be a gradual migration.
Thanks for the help.
You will need to create a new server group AAA pointing to the servers in the new domain for authentication.
Then make a new connection profile that uses AAA server group.
Your users will have to choose the connection profile (absent some more advanced stuff like issue user certificates that can be archived attributes that match a profile or another).
This could also be done with ISE 1.3 who can act as a RADIUS server and join multiple AD domains on backend as identity stores. (or even with ISE 1.2 If you use one of the AD directories like LDAP vs native AD store).
Tags: Cisco Security
Similar Questions
-
AnyConnect VPN client can be used for IPSec remote access VPN connection?
I think I heard it somewhere that AnyConnect VPN can be used for connections SSLvpn IPSec VPN. Is this possible? Thank you!
No, the Anyconnect software cannot be used to establish the framework for a VPN IPSEC IKE.
-
Service of ASA module does on 6509-E support remote access VPN?
I'm having a problem of configuration of remote access VPN (SSL, Anyconnect ect.) on the Module of ASA Service on 6509-E. It is even supported or I'm wasting my time trying to do something that won't work in a first place :) to work? Site-to-Site works without any problem.
Technical info:
6509-E current SUP 2 t SY 15.1 (2)
Module of ASA - WS-SVC-ASA-SM1 running of the image - asa912-smp-k8 & asdm-712
Licenses on ASA:
Encryption--Activated
3DES-AES-Encryption - enabled
Thank you for the support.
You run multiple context mode?
If you are, access remote VPN only is not supported in this case:
"Note several context mode only applies to the IKEv2 and IKEv1 site to another and applies not to the AnyConnect, clientless SSL VPN, the legacy Cisco VPN, native VPN client client of Apple, the VPN client from Microsoft or cTCP for IKEv1 IPsec."
-
remote access VPN not connected - no access inside
Hi, I have successfully configured remote access VPN router, it is connected, but no access to the inside, none of my ip addresses. I do not know SPLIT_ACL is ok and I've denied NATting them. For me, everything is ok. I did a lot in ASA, without anyproblem. Thanks for the comments.
enable secret 5 $1$ y0AJ$ rhrjbrpe5NDiAyHGlfeNi.
!
AAA new-model
!
!
AAA authentication login bcc_users local
AAA authorization bcc_group LAN
!
crypto ISAKMP policy 10
BA aes
preshared authentication
Group 2
!
ISAKMP crypto client configuration group ra_vpn_bcc
key *.
DNS 8.8.8.8
bcc.local field
pool vpn_pool
ACL SPLIT_ACL
Max-users 7
netmask 255.255.255.0
!
!
Crypto ipsec transform-set RIGHT aes - esp esp-sha-hmac
tunnel mode
!
!
!
Crypto-map dynamic dynmap 10
Set transform-set RIGHT
market arriere-route
!
!
card crypto client CRYPTO_VPN of authentication list bcc_users
card crypto isakmp authorization list bcc_group CRYPTO_VPN
crypto card for the CRYPTO_VPN client configuration address respond
map CRYPTO_VPN 10-isakmp ipsec crypto dynamic dynmap
!
!
interface GigabitEthernet0/0/4
IP address %.
NAT outside IP
auto negotiation
BFD interval 50 50 5 min_rx multiplier
card crypto CRYPTO_VPN
!
!
IP local pool vpn_pool 172.31.255.0 172.31.255.250
NAT extended IP access list
deny ip 10.0.0.0 0.255.255.255 172.31.255.0 0.0.0.255
deny ip 172.16.0.0 0.0.255.255 172.31.255.0 0.0.0.255
deny ip 192.168.0.0 0.0.255.255 172.31.255.0 0.0.0.255
IP address 172.16.0.0 allow 0.15.255.255 all
IP 192.168.0.0 allow 0.0.255.255 everything
IP 10.0.0.0 allow 0.255.255.255 everything
SPLIT_ACL extended IP access list
IP 10.0.0.0 allow 0.255.255.255 172.31.255.0 0.0.0.255
IP address 172.16.0.0 allow 0.0.255.255 172.31.255.0 0.0.0.255
IP 192.168.0.0 allow 0.0.255.255 172.31.255.0 0.0.0.255
Take a look at the delivery.
You do not have a route to the VPN pool on a nearby device.
-
Hi all
I need help with remote access vpn configuration. I want to some remote users who have access to the internet on their system to connect and access an application server in my seat social cisco vpn client user. I use Cisco 881. I am unable to use the SDM configuration because it seems that SDM is not supported by the router so I'm using command line. I'd appreciate any help I can get. Thank you.
This is the configuration I have:
VPNROUT #sho run
Building configuration...Current configuration: 6832 bytes
!
! Last configuration change at 10:50:45 UTC Saturday, May 30, 2015, by thomas
version 15.2
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
hostname VPNROUT
!
boot-start-marker
boot-end-marker
!
!
logging buffered 51200 warnings
!
AAA new-model
!
!
AAA authentication login default local
AAA authentication login userauthen1 local
AAA authorization groupauthor1 LAN
!
!
!
!
!
AAA - the id of the joint session
iomem 10 memory size
!
Crypto pki trustpoint TP-self-signed-1632305899
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1632305899
revocation checking no
rsakeypair TP-self-signed-1632305899
!
!
TP-self-signed-1632305899 crypto pki certificate chain
certificate self-signed 01
3082022B 30820194 02020101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31363332 33303538 6174652D 3939301E 170 3134 30313233 31323132
33325A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 36333233 65642D
30353839 3930819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100BC0C 341CD79B A38572CE 1F0F9A91 F96B133C A889B564 E8352034 1CF5EE4B
B505616B 6014041B EC498C0A F6C5CD2B F5BF62DA BD6E1C44 0C7B9089 1FD0C6E5
299CEB40 28CD3F3B ADE3468A B07AAA9F AC42F0A7 4087172A 33C4013D 9A50884D
5778727E 53A4940E 6E622460 560C F597DD53 3B 261584 E45E8776 A848B73D 5252
92 50203 010001A 3 53305130 1 130101 FF040530 030101FF 301F0603 0F060355 D
551 2304 18301680 14E85AD0 DEF133D8 E09516FD 0AA5FDAD E10EAB1A FA301D06
03551D0E E85AD0DE 04160414 F133D8E0 9516FD0A A5FDADE1 0EAB1AFA 300 D 0609
2A 864886 818100A 5 05050003 5B23ED5B 9A380E1F 467ABB03 BAB1070B F70D0101
7A 218377 73089DC1 D32DA585 C5FD7ECE 0D000F96 7F3AB6CC 71509E8F 3F1C55AE
E37536A3 1008FBF9 A29329D5 6F76DDC0 AA1C70AE 958AAE5D 32388BE4 2C1C6839
0369 D 533 027B612C 8D199C35 C008FE00 F7E1DF62 9C73E603 85C3240A 63611D 93
854A61E2 794F8EF5 DA535DCC B209DA
quit smoking
!
!
!
no record of conflict ip dhcp
DHCP excluded-address IP 10.10.10.1
DHCP excluded-address IP 172.20.0.1 172.20.0.50
!
DHCP IP CCP-pool
import all
Network 10.10.10.0 255.255.255.248
default router 10.10.10.1
Rental 2 0
!
IP dhcp pool 1
network 172.20.0.0 255.255.240.0
domain meogl.net
router by default - 172.20.0.1
172.20.0.4 DNS server 41.79.4.11 4.2.2.2 8.8.8.8
8 rental
!
!
!
no ip domain search
IP domain name meogl.net
name of the IP-server 172.20.0.4
name of the IP-server 41.79.4.11
IP-server names 4.2.2.2
8.8.8.8 IP name-server
IP cef
No ipv6 cef
!
!
license udi pid CISCO881-K9 sn FCZ1804C3SL
!
!
username secret privilege 15 thomas 4 JXSizd1r/hMqPpGz94vKBb5somtpZLy03k50rJvHO6c
username privilege 15 secret 4 mowe hlfv/rdDRCAeTUzRXbOIfdaKhJCl1onoGdaQeaQsAnw
!
!
!
!
!
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto client configuration group moweclients
XXXXXXX key
DNS 172.20.0.4
meogl.net field
pool mowepool
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac moweset
tunnel mode
!
!
!
Dynmap crypto dynamic-map 1
Set transform-set moweset
market arriere-route
!
!
card crypto client mowemap of authentication list userauthen1
card crypto isakmp authorization list groupauthor1 mowemap
client configuration address card crypto mowemap answer
mowemap 1 card crypto ipsec-isakmp dynamic dynmap
!
!
!
!
!
interface Loopback0
IP 172.30.30.1 255.255.255.0
IP nat inside
IP virtual-reassembly in
!
interface FastEthernet0
no ip address
!
interface FastEthernet1
no ip address
!
interface FastEthernet2
switchport access vlan 100
no ip address
!
interface FastEthernet3
no ip address
!
interface FastEthernet4
IP 41.7.8.13 255.255.255.252
NAT outside IP
IP virtual-reassembly in
intellectual property policy map route VPN-CLIENT
Shutdown
automatic duplex
automatic speed
mowemap card crypto
!
interface Vlan1
Description $ETH_LAN$
IP 10.10.10.1 255.255.255.248
IP tcp adjust-mss 1452
!
interface Vlan100
IP 172.20.0.1 255.255.240.0
IP nat inside
IP virtual-reassembly in
!
local pool IP 192.168.1.1 mowepool 192.168.1.100
IP forward-Protocol ND
IP http server
23 class IP http access
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
IP nat inside source overload map route interface FastEthernet4 LAT
IP route 0.0.0.0 0.0.0.0 41.7.8.12
!
access-list 23 allow 10.10.10.0 0.0.0.7
access-list 23 allow 172.20.0.0 0.0.15.255
access-list 100 permit ip 172.20.0.0 0.0.15.255 everything
access-list 144 allow ip 192.168.1.0 0.0.0.255 any
not run cdp
!
LAT route map permit 1
corresponds to the IP 100
IP 41.7.8.12 jump according to the value
!
route VPN-CLIENT map permit 1
corresponds to the IP 144
!
Line con 0
no activation of the modem
line to 0
line vty 0 4
access-class 23 in
privilege level 15
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
transport input telnet ssh
!
!
endPlease the configuration above, give me the desired output.
Thank you.
Hello Thomas,.
I'm glad to hear that you have found useful in the example configuration.
I checked your configuration and everything seems ok with him, especially the statements of nat.
ip local pool mowepool 192.168.1.1 192.168.1.100 access-list 100 deny ip 172.20.0.0 0.0.15.255 192.168.1.0 0.0.0.255 access-list 100 permit ip 172.20.0.0 0.0.15.255 any route-map LAT permit 1 match ip address 100 ip nat inside source route-map LAT interface FastEthernet4 overload interface Vlan100 ip address 172.20.0.1 255.255.240.0 ip nat inside ip virtual-reassembly in
Try to generate ICMP traffic behind your 100 VLANS to the client VPN in order to answer the following questions:
-The router receives this traffic between VLAN100 unit?
-The router is encrypt this traffic, after receiving the ICMP packet?
#show crypto ipsec router its can help you with this question. Look for the program/decaps counters.
-The same, but the other way around (from VPN client to device behind VLAN100) try to locate the problem.
The following document explains more this crypto commands and debugs if necessary.
-
DRY 1941/licenses K9 IPSec Remote Access
Hi all
I had some difficulty trying to get a definitive answer on this and im hoping some can clear this up for me once and for all.
On the ISR G2 1941 with SECURITY license on IOS 15 technology...
- Are ipsec VPN for remote access is supported?
- If so, do I buy any other feature of the licenses for the number of "seats"? (SSLVPN for example, even if I do not wish to use SSLVPN, only of the IPSec remote access)
Short and sweet
Thanks for all the help
See you soon
Shaun
Security technology licenses is sufficient.
Please refer to This Q & A , which States:
Q. what bitrate County and the performance of the tunnel are available on the Cisco ISR G2 routers with SECK9 license?
A. the SEC - K9 permanent licenses apply to the Cisco 1900, 2900 and 3900 ISR G2 platforms; These licenses limit all counts of tunnel encrypted to maximum of 225 tunnels for safety IP (IPsec), Secure Sockets Layer VPN (SSL VPN), a secure gateway of multiplexing (TDM) of distribution time and secure Cisco Unified border element (CUBE) and 1000 tunnels for sessions of the Transport Layer Security (TLS).
The license of SEC - K9 limit flow to less than or equal to 85 Mbps traffic unidirectional or not the router ISR G2, with a total of 170 Mbps two-way encrypted. This requirement applies to the Cisco 1900, 2900 and 3900 ISR G2 platforms. -
Remote access VPN group name and password
Hi guys,.
Can someone tell me please the command to display a remote access VPN group name and the password on a firewall version 8.0 of ASA? Any help will be greatly appreciated.
Thank you
Lake
Remote VPN IPsec IKEv1 access are listed as groups of tunnel. If you enter
more system:running-config | b tunnel-group
You can see the config sections (starting with the first mention of the tunnel-group) as well as the pre-shared key ikev1 plaintext String.
-
Hello!
I have 9.1 (3) version of Cisco ASA with remote access VPN set UP on the outside interface. When the user connects to the Internet on the outside interface, it works well. My goal is to allow the connection of all other interfaces (inside the dmz and etc.) to the outside interface. Cisco ASA allows to do? Order to packet - trace output is less to:
MSK-hq-fw1 # packet - trace entry inside tcp 10.10.10.1 14214 1.1.1.2 443
Phase: 1
Type:-ROUTE SEARCH
Subtype: entry
Result: ALLOW
Config:
Additional information:
developed 1.1.1.2 255.255.255.255 identity
Phase: 2
Type:-ROUTE SEARCH
Subtype: entry
Result: ALLOW
Config:
Additional information:
developed 1.1.1.2 255.255.255.255 identity
Result:
input interface: inside
entry status: to the top
entry-line-status: to the top
the output interface: NP identity Ifc
the status of the output: to the top
output-line-status: to the top
Action: drop
Drop-reason: (headwall) No. road to host
Hello
Well, you can of course turn VPN on other interfaces, but to be honest, I never even tried to set up the VPN it otherwise than of multiple multiple external interfaces in the case of the ISP and in this case only for testing purposes.
Some things related to the ASA are well known but not well documented.
The official document that I can remember: this is the following (which only refers to this limitation regarding the ICMP)
Note
For security purposes the security appliance does not support far-end interface ping, that is pinging the IP address of the outside interface from the inside network.
Source (old configuration guide):
-Jouni
-
ASA 5505 - remote access VPN to access various internal networks
Hi all
A customer has an ASA 5505 with a remote access vpn. They are moving their internal network to a new regime and that you would be the users who come on the vpn to access the existing and new networks. Currently can only access the existing. When users connect to access remote vpn, the asa gave them the address 192.168.199.x. The current internal network is 200.190.1.x and that they would reach their new network of 10.120.110.x.
Here is the config:
:
ASA Version 8.2 (5)
!
ciscoasa hostname
enable encrypted password xxx
XXX encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 200.190.1.15 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address 255.255.255.0 xxxxxxx
!
exec banner the ACCESS NOT AUTHORIZED IS STRICTLY PROHIBITED
connection of the banner the ACCESS NOT AUTHORIZED IS STRICTLY PROHIBITED
banner asdm the ACCESS NOT AUTHORIZED IS STRICTLY PROHIBITED
passive FTP mode
access extensive list ip 200.190.1.0 inside_access_in allow 255.255.255.0 any
outside_access_in list extended access permit icmp any external interface
access extensive list ip 192.168.199.0 outside_access_in allow 255.255.255.192 host 10.120.110.0
Standard access list MD_IPSEC_Tun_Gp_splitTunnelAcl allow 200.190.1.0 255.255.255.0
MD_IPSEC_Tun_Gp_splitTunnelAcl list standard access allowed host 10.120.110.0
access extensive list ip 200.190.1.0 inside_nat0_outbound allow 255.255.255.0 192.168.199.0 255.255.255.192
inside_nat0_outbound list extended access allowed host ip 10.120.110.0 192.168.199.0 255.255.255.192
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
mask 192.168.199.10 - 192.168.199.50 255.255.255.0 IP local pool Remote_IPSEC_VPN_Pool
IP verify reverse path to the outside interface
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 200.190.1.0 255.255.255.0
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 190.213.43.1 1
Route inside 10.120.110.0 255.255.255.0 200.190.1.50 1
Route inside 192.168.50.0 255.255.255.0 200.190.1.56 1
Route inside 192.168.60.0 255.255.255.0 200.190.1.56 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
http server enable 10443
http server idle-timeout 5
Server of http session-timeout 30
HTTP 200.190.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
(omitted)
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Crypto isakmp nat-traversal 3600
Telnet timeout 5
SSH 200.190.1.0 255.255.255.0 inside
SSH timeout 5
SSH version 2
Console timeout 5
dhcpd outside auto_config
!
a basic threat threat detection
scanning-threat shun threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
internal MD_SSL_Gp_Pol group strategy
attributes of Group Policy MD_SSL_Gp_Pol
VPN-tunnel-Protocol webvpn
WebVPN
list of URLS no
disable the port forward
hidden actions no
disable file entry
exploration of the disable files
disable the input URL
internal MD_IPSEC_Tun_Gp group strategy
attributes of Group Policy MD_IPSEC_Tun_Gp
value of banner welcome to remote VPN
VPN - connections 1
VPN-idle-timeout 5
Protocol-tunnel-VPN IPSec webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list MD_IPSEC_Tun_Gp_splitTunnelAcl
the address value Remote_IPSEC_VPN_Pool pools
WebVPN
value of the RDP URL-list
attributes of username (omitted)
VPN-group-policy MD_IPSEC_Tun_Gp
type of remote access service
type tunnel-group MD_SSL_Profile remote access
attributes global-tunnel-group MD_SSL_Profile
Group Policy - by default-MD_SSL_Gp_Pol
type tunnel-group MD_IPSEC_Tun_Gp remote access
attributes global-tunnel-group MD_IPSEC_Tun_Gp
address pool Remote_IPSEC_VPN_Pool
Group Policy - by default-MD_IPSEC_Tun_Gp
IPSec-attributes tunnel-group MD_IPSEC_Tun_Gp
pre-shared key *.
!
!
context of prompt hostname
: end
The following ACL and NAT exemption ACL split tunnel is incorrect:
MD_IPSEC_Tun_Gp_splitTunnelAcl list standard access allowed host 10.120.110.0
inside_nat0_outbound list extended access allowed host ip 10.120.110.0 192.168.199.0 255.255.255.192
It should have been:
Standard access list MD_IPSEC_Tun_Gp_splitTunnelAcl allow 10.120.110.0 255.255.255.0
access extensive list ip 10.120.110.0 inside_nat0_outbound allow 255.255.255.0 192.168.199.0 255.255.255.192
Then 'clear xlate' and reconnect with the VPN Client.
Hope that helps.
-
authentication of remote access, vpn and ldap
I have a test environment with 2 hours fireval 5505: the first firewall is remote access VPN server and the Interior of this firewall is a network of domain with a domain controller, DNS server and a workstation. DHCP is disabled and the PC have a static address.outside of the VPN server is attached outside the other ASA 5505 firewall. on the inside of the firewall, there is a workstation.the workstation would be to connect via vpn for remote access on the domain network. I have configured the VPN server for remote access through a wizard and his
configuration is the following
Result of the command: "show running-config"
: Saved
:
ASA Version 8.2(1)
!
hostname ciscoasa
domain-name dri.local
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Vlan1
nameif inside
security-level 100
ip address 10.13.74.5 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address 192.168.30.1 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
ftp mode passive
dns server-group DefaultDNS
domain-name dri.local
access-list inside_nat0_outbound extended permit ip any 192.168.50.0 255.255.255.240
access-list outside_access_in extended permit tcp 192.168.50.0 255.255.255.240 10.13.74.0 255.255.255.0
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpnpool 192.168.50.1-192.168.50.10 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.30.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
action terminate
dynamic-access-policy-record vpnldap
network-acl inside_nat0_outbound
aaa-server vpn protocol ldap
aaa-server vpn (inside) host 10.13.74.20
ldap-base-dn DC=DRI,DC=LOCAL
ldap-group-base-dn cn=test,cn=users,dc=dri,dc=local
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *
ldap-login-dn cn=test,cn=users,dc=dri,dc=local
server-type microsoft
http server enable
http 10.13.74.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!
dhcpd address 10.13.74.9-10.13.74.40 inside
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy drivpn internal
group-policy drivpn attributes
dns-server value 10.13.74.20 10.8.2.5
vpn-tunnel-protocol IPSec l2tp-ipsec
default-domain value dri.local
tunnel-group drivpn type remote-access
tunnel-group drivpn general-attributes
address-pool vpnpool
authentication-server-group vpn
default-group-policy drivpn
tunnel-group drivpn ipsec-attributes
pre-shared-key *
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:1fc23fb20a74f208b3cde5711633ad3d
: end
When I tried to workstation on the internal part of the second firewall (no remote access vpn server) to connect to the vpn, everything is ok. I used the cisco vpn client, but I can't ping domain controller, workstation, I can't use the shared folder on them. Why?
Please help me
Thank you
Thanks for letting me know! Can you please give the station "answered"? Thank you!
-
RV042G REMOTE ACCESS VPN Config Shrew Soft
Hello
I am trying to set up a VPN with IPSEC remote access, I have a router Cisco Small Business RV042G. I have managed to connect with the QuickVPN client using a previously created user. I also managed to establish a connection with the TheGreenBow pre-shared key customer with customer authentication by IP address or by mail. Exactly the same method I managed with the Shrew Soft VPN Client. I would like to Shrew Soft VPN with only establish a connection with the nicknames as if only the pre-shared key is used all over the world can access VPN set up on this computer.
To sum it up can you tell me what configuration must be put to use the identification of the user only with the Shrew Soft VPN Client?
Thank you very much.
Hello
Usually it is used Mutual PSK + XAuth, when you want to set up user and password, outside the pre-shared key authentication.
But RV042G don't support XAuth, which means that you can not create a separate user/pass to connect VPN Shrew.
Kind regards
Bismuth
-
Remote access VPN user permission
Hi support them.
It is a way for a remote access VPN to allow some users access to "Host A, B, C" and other users to access hosts D, E, F? Basically, we want to have some users have access at home to a few servers and other users have access only to some other servers. Is this possible without a GANYMEDE or some other device? Thank you guys!
Hi John,.
Yes, you can configure split tunneling to allow a specific group of users access to specific hosts.
How this is achieved, it is that you create a connection profile different for different users, associate a policy group and the title of each group policy, you have a split tunnelling access-list defined with entries of different hosts.You must create 2 profiles of connection here and match them with 2-group policy allowing access to 2 differernt resources (they can be multiple as well)
Here is a reference document: -.
Kind regards
Dinesh MoudgilPS Please rate helpful messages.
-
PIX 515E and remote access VPN
I use a PIX 515E with: ASDM Version: 5,0000 51 PIX Version: 8.0 (4) and configure it with remote access VPN.
I would like to get an email every time that a user login (and or disconnection) to the VPN. Remote clients use the Cisco VPN Client.
Any help is appreciated,
Hello
Here is a link to the email configuration when you log in to the ASA/PIX: http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/63884-config-asa-00.html#anc7
Then you can create a list of message to send the logs only for the connection/disconnection of the VPN user: http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/63884-config-asa-00.html#anc18
There is a wire that is linked here: https://supportforums.cisco.com/discussion/10798976/asa-email-logging-issue
-
We have 10 sites with ASA 5505 connected to the ASA 5510 of main office
through IPSec VPN tunnels. Home users connect to the main office network
using the remote access vpn connection. They can also connect to the ASA 5505
remote sites by vpn for remote access to the ASA 5510?
Thanks, please help!
Here's the PDF.
-
How to use ACS 5.2 to create a static ip address user for remote access VPN
Hi all
I have the problem. Please help me.
Initially, I use ACS 4.2 to create the static ip address for VPN remote access user, it's easy, configuration simply to the user defined > address assignment IP Client > assign the static IP address, but when I use ACS 5.2 I don't ' t know how to do.
I'm trying to add the IPv4 address attribute to the user to read "how to use 5.2 ACS", it says this:
1Ajouter step to attribute a static IP address to the user attribute dictionary internal:
Step 2select System Administration > Configuration > dictionaries > identity > internal users.
Step 3click create.
Static IP attribute by step 4Ajouter.
5selectionnez users and identity of the stage stores > internal identity stores > users.
6Click step create.
Step 7Edit static IP attribute of the user.
I just did, but this isn't a job. When I use EasyVPN client to connect to ASA 5520, user could the success of authentication but will not get the static IP I set up on internal users, so the tunnel put in place failed. I'm trying to configure a pool of IP on ASA for ACS users get the IP and customer EasyVPN allows you to connect with ASA, everything is OK, the user authenticates successed.but when I kill IP pool coufigurations and use the "add a static IP address to the user 'configurations, EzVPN are omitted.
so, what should I do, if anyboby knows how to use ACS 5.2 to create a user for ip address static for remote access VPN, to say please.
Wait for you answer, no question right or not, please answer, thank you.
There are a few extra steps to ensure that the static address defined for the user is returned in the Access-Accept. See the instuctions in the two slides attached
Maybe you are looking for
-
Re: DVD drive hardware error - what is gravity?
Hello I have a Toshiba Satellite Pro A300-1PK, and even if I took good care of her, the DVD player seems to be broken.Move the head with the drive laser top correctly, but the DVD does not seem to turn. The DVD player is to be entirely changed, so pr
-
I have a sql 2005 with Service Pack 3 installed on a machine and on the second machine CA ARCserve backup software R16.5 installed and configured to use the SQL 2005 as its database, the backup and the restaurant's fines and thers one is work of migr
-
Several errors Windows Update - what I found online is not accomplish anything.
My apologies for not reading the instructions... I am running Windows 7 Ultimate 64-bit. Unfortunately my history of editing does not go far back enough to show the last successful update installed before this problem occurred. I think it was short
-
When I send pdf files the recipients using aol receive a file "WinMail" they can't open.
When I send pdf files the recipients using aol receive a file "WinMail" they can't open. I have my mail format HTML the value and we tried also plain text without change.
-
How can I delete an audio voice that I added a file WMM?
I have a 3 minute video. I recorded a 3 minute audio to go with it and hit add music and it worked fine. Now, I want to delete only the audio and replace it with another. Help please