artifacts of race after using the pathfinder/exclusion

Similar Questions

• Does not start after using the recovery Toshiba Tecra M5 - disk

  After using the restore on my Tecra M5 CD, the computer cannot even start!

  What to do in this situation?

  Hi jbdoktor,

  Does that mean exactly?
  Now, what happens if you start the computer?

  Sorry, but without this information it is difficult to help you. Maybe you should try the recovery again disk

• Should I update all the files from the Toshiba site after using the recovery CD

  I just used my recovery CD and update the Windows Update System.

  The question is: should I update all files in the files on this site download section as well?

  Usually after using the Toshiba Recovery CD everything should works and works correctly
  To my knowledge from time to time Toshiba has released new version of some tools or drivers. For example the BT stack will be developed all the time.
  But I think that if you have any problems with your system and peripherals, then you don't need t to update anything.
  Small is my opinion...

• My Aspire one 753 does not connect to WIFI after using the Recovery Manager.

  After using the recovery on my Aspire one 753 inbuild Manager my phone doesn't conect to wireless internet. I think the problem has something to do with the drivers, but I'm not sure. need help ASAP

  I used the live usb of ubuntu when I discovered that my network card was acutally one of Intel wifi card. https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24217&lang=eng&ProdId=3316. Thank you very much for your support on the issue

• XP unbootable after using the recovery disk, but Linux will be

  I have a laptop Toshiba Satellite L25-S1216. I had some bad virus, so I used the TOSHIBA Windows XP Recovery and Applications/drivers DVD provided with the computer when I bought it. I had used this once recovery DVDs or two before without problem, the last time was about 1 year ago. The recovery process seems to be okay: he seemed to format the disk and copy the files from the DVD to the hard drive. He copied about 5 600 MB hard disk for about 10 minutes and 40 seconds.

  But the computer does not boot from the hard drive after using the recovery DVD. I tried the process several times and it does not start in Windows XP on the hard drive. I checked the settings in the BIOs to make sure he can start, but it does not start in Windows XP on the hard drive. All I get is a white screen with a horizontal blinking cursor, nothing else, no error message, nothing.

  Then I got a copy of Linux (Fedora 14 live) on a CD and started on the computer from the CD R - W, DVD R drive. Then I loaded Fedora 14 hard disk. , I can boot into Linux (Fedora 14) of the fine to hard drive. In fact I use Linux to write this e-mail now. I also see the files that have been copied from the DVD recovery Windows XP on the hard drive, when I'm on Linux.

  Does someone has an idea what could be the problem? The only difference between now and the last time I used the recovery about DVDs a year, is that I had to replace it internal CD R - W, DVD R drive, as a mechanical part was broken. I replaced it with the same exact model (TS-L462) who was in the computer when I got it is new.

  Thank you

  B.

  Not sure how a restore xp cd may give you the option to start the recovery console.

  With a regular xp, recovery cd / repair console is launched all simply by selecting the 'r' on the configuration screen.  Subsequently, the recovery console opens and takes you to the drive prompt.

  In any case, what I suggest is to execute commands to drive at the command prompt that could make the drive bootable again.

  the commands are:

  Chkdsk /r

  Fixboot

  bootcfg /rebuild

  FIXMBR

  Normally, fixmbr running on a laptop is not recommended because it disables the hidden partition that contains the files for recovery.  Then re-enable it manually, is not easy. But since you have your on dvd, then you are lucky.

• is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Hi Kenelms,

  You can follow this link & check if it helps.

  HOW to: Set up hardware profiles for laptop computers in Windows XP

  Hope the helps of information.

  Please post back and we do know.

• Stupid question CS6. How can I get rid of my experience after using the quick selection tool?

  Stupid question CS6. How can I get rid of my experience after using the quick selection tool?

  The best way would be to make sure that your layer is not a background layer: click the lock icon in this case. Then click the icon at the bottom of the layer panel layer mask. This will create a mask that you can refine and not be destructive.

  

• When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle

  CARS: 2 nodes with Oracle single Client Access name (SCAN)

  OS: OEL 5.4 64-bit

  Version: 11.2.0.3

  When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle. I noticed that the service is in place and properly configured (client tnsnames).

  servicioBD = (DESCRIPTION = (LOAD_BALANCE = yes) (ADDRESS = (PROTOCOL = TCP)(HOST = scanvip.domain1.local) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = serviceBD) (FAILOVER_MODE = (TYPE = SΘLECTIONNER) (METHOD = BASIC) (RETRIES = 180) (DELAY = 5))))

  serviceBD service

  SQL > select name, failover_method, failover_type, failover_retries, goal, clb_goal, aq_ha_notifications from dba_services where service_id = 3;

  METHOD NAME TYPE PURPOSE CLB_GOAL AQNOT ATTEMPTS

  ---------------------------------------------------------------- ----------- ---------- -------- ---------- -------- -----

  serviceBD BASIC SELECT 180 NO LONG YES

  But when I do not use the service created for the tnsnames file SCAN, it's that if I directly put tnsnames to connect to any work of two nodes very well.

  Node 1

  servicioBD =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.10)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl)

  )

  )

  Or

  Node 1

  servicioBD =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.11)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl)

  )

  )

  I have also observed the following (cluvfy).

  1 all LISTENER_SCAN running node 1

  2 there is no TCP connectivity

  3 the error message is obtained PRVF-5713

  [grid@rac1 ~] comp cluvfy $ scan - verbose

  Check scan

  Checking the single Client access name (SCAN)...

  ANALYZE the running node name?      ListenerName Port running?

  ----------------  ------------ ------------  ------------  ------------ ------------

  scanvip.Domain1.local 1521 LISTENER_SCAN1 true true rac1

  scanvip.Domain1.local 1521 LISTENER_SCAN2 true true rac1

  scanvip.Domain1.local 1521 LISTENER_SCAN3 true true rac1

  Checking TCP connectivity to ANALYZE listeners...

  Node of ListenerName TCP connectivity?

  ------------ ------------------------  ------------------------

  RAC1 LISTENER_SCAN1 no

  RAC1 LISTENER_SCAN2 no

  RAC1 LISTENER_SCAN3 no

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.17) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.19) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.18) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  Check the resolution settings of name to 'scanvip.domain1.local '...

  SCAN the IP address status comment name

  ------------ ------------------------ ------------------------ ----------

  scanvip.Domain1.local 10.210.2.18 spent

  scanvip.Domain1.local 10.210.2.19 spent

  scanvip.Domain1.local 10.210.2.17 spent

  Verification of the installation program ANALYZES VIP and the listener has failed

  The analysis check failed on all specified nodes.

  Could someone help me please.

  The solution was to restart scan_listener.

  srvctl stop scan_listener

  srvctl start scan_listener

• Background layer unlocks and becomes the normal "no flat" layer after using the crop tool in PS CC 2015.1 (a different behavior for older versions of PS)

  Hi all

  I found that it is more difficult to explain than I thought

  I don't like the new behavior in the latest version of Photoshop (CC 2015.1) regarding the way in which the background layers automatically unlock and convert to regular layers after using the crop tool. It's completely different to how things worked in previous versions, where a background layer remained in locked state flattened after using the crop tool.

  I get a LOT of images and this change has added an extra step to each image that I harvest, because I flatten the layers after cropping before saving the image. I looked through the preferences but cannot find a way to change this new behavior. Am I missing something?

  Thanks in advance for your help

  See if checking Delete the cropped Pixels in the tool options makes a difference.

  

• I just make the payment for the license, after using the month trial. and when I want to use the programs and said that I must pay. and received e-mail confirmation of payment, that is not what I do

  I just make the payment for the license, after using the month trial. and when I want to use the programs and said that I must pay. and received e-mail confirmation of payment, that is not what I do

  
  

  Please see the links below.

  • Creative Cloud applications unexpectedly back in the test mode. CCM, CS6
  • Applications creative Cloud back in test mode after an update until 2015 for CC

  Also, make sure you use the right adobe ID to log in.

  Hope this will help you.

  Kind regards

  Hervé Khare

• Acrobat CC - lost Scripture I posted after using the fill & sign. Help, please...

  Acrobat CC - lost Scripture I posted after using the fill & sign. Help, please... It happened after I merged the two files...

  Hi mannys14196422,

  This problem has been resolved in the last update. Go help--> Check for Updates.

  Please let us know if you still face the question.

  Kind regards

  Sandeep

• I use the trial version of CS5 version, two years ago. I was deleted from my computer after using the program. Now, once again I want to install a trial version of CS5 on my computer. I want to improve my program information. That copyright law is there a

  I use the trial version of CS5 version, two years ago. I was deleted from my computer after using the program. Now, once again I want to install a trial version of CS5 on my computer. I want to improve my program information. That copyright law are there downsides to the wonder of Adobe?

  Hello

  Please Download CS5 products

  But you can only use it as a trial for a limited time unless you do not provide a serial number to activate the product.

  Kind regards

  Sheena

• Acrobat reader crashes after using the send a file feature

  I use 32 bit Windows 7 with all updates installed and Adobe Reader 11.0.11. After using the files of a PDF acrobat reader email feature send it crashes. The window is not frozen, but when I click on the X to close the document, nothing happens. I see the button push, but the window remains open. File-> exit does not work either. I can't open another PDF until I use taks Manager to close the Adobe Reader software.

  I tried to uninstall and reinstall drive, I created a new Windows user profile nothing helps. This happens on any PDF file I have open and click send a file.

  Disable protected mode solved the problem.

• How do you use the pathfinder on objects that have applied effects?

  I described some text, then applied effect > warp > Ark. What I want to do is cut off parts of the letters apart now listed. I tried to use the pathfinder palette, but it applies the pathfinder to the former, not surmounted by an arch shape. All advice is appreciated. Thank you.

  In which case it is important to maintain the effect of deformation, you need to use rather complex effect Pathfinder constructions (see effect > Pathfinder).

  It's probably easier to simply expand the appearance of your effects of deformation (see menu object), then use the Pathfinder palette.

  What version of Illustrator do you use?

• Spit Lightroom 4.3 when using the brush after using the red eye tool

  I bought Lightroom a few days ago. I was traveling so I didn't have the time to 4.3.

  The version shipped with the disk (4.1) worked like a dream. I downloaded 4.3 yesterday and I couldn't be sadder. First of all, I noticed that it cause the 'root' to use more CPU, which means that it does not use the CPU for Lightroom itself. More demand is usually and significantly slower than the original one.

  Today, I used the red eyes for the first time, and I can't just brush top unless it crashes! It is simply impossible. I rebooted. Upgrade my Mac OS 10.7.5...  No use. I even uninstalled and reinstalled again. I was forced to do all my first edit in there usinf the brush, then use the tool red eyes as the last step. But any time that I commit the brush after using the red eye tool, it crashes instantly

  It seems something funny on your establishment for sure that there is not a wide spread thing.

  What exactly is your establishment and where are the various files located - catalogue, images, etc.