Aspire AIO a7600u-ur308, replacement of hard disk

Similar Questions

• Satellite L850 - how to replace a HARD disk recovery partition?

  Hello.

  Toshiba laptop Satellite L850. PSKDGA-02Y012. The original HARD drive has failed in his colleagues even mobile, so we replaced the two HARD drive after you have created a recovery USB. When used to restore the operating system to original status of OOB.
  That has worked and portable runs much, but now I want to BACK the recovery partition (now only on the USB I think) for the new HARD drive.

  Simple to shrink the disk HARD C: (partition 2) on the HARD disk, but then how to transfer twhats on the USB (USB recovery stick) back on the HARD drive?

  Thanks for any help.

  Karim...

  Hello karim

  When you buy the notebook you will get it with preinstalled operating system (recovery image). Original recovery image is saved on the HARD disk on the recovery partition.
  Each owner of the laptop has option to make the backup recovery image and create recovery media. It could be the DVD or USB support. You can do this by using preinstalled Toshiba recovery media creator tool.
  This tool will create bootable recovery media that can be used for the installation of original image recovery if there is problem with the installation of image disk HARD recovery or when the drive is defective and must be replaced.

  Where the HARD drive is faulty and should be replaced or the owner of the laptop to upgrade HARD drive, you can install original image created using recovery recovery media (USB). After installing recovery image, you will have the same situation as for the first boot after the purchase of the laptop. With other words notebook will have factory settings again.

  In this case original recovery image is already copied onto the new HARD drive and you will also be able to start the installation of HARD drive recovery. There is therefore no reason to copy a recovery on HARD drive media.
  Please note: installation of HARD drive recovery works with the factory only settings.

  If you have any other questions do not hesitate to ask.

  Good luck.

• Acer Aspire Easystore HDD Fail - replace/upgrade HARD drive

  
  

  I have an Acer Aspire Easystore and recently suffered a hard drive failure and will have no chance of finding a list of compatibility hdd of any kind.

  Currently drives 1 TB and since 1 has no, I copied all the data on a single 3 TB drive, so I'm ready to replace all the drives with drives of 2 TB or 3 TB and start a new raid 6 (5 + 1, I think).

  Can you help me?

  P/N: ARE. TR100.270IE

  All that I see, said the SNID must be 11 or 12 digits, but mine is only 8

  It's *.

  Help, please

  [edited for the protection of personal information - please do post any personal or unique information such as but not limited to names, email addresses, telephone numbers, serial numbers, etc..]

  
  

• SMART failure provided on hard disk 2: WDC WD 3200AAJS-55RY-AO (S1) __WARNING: IMMEDIATELY back up your data and replace your hard disk drive failure can be immenent

  Please help... I dunno what to do one day, I came home from work and my new about sony vaio desktop has been frozen, so I rebooted and now I have this message when I try to start and I do not have a vista disc or a recovery disc and am worried my lost data as I do not know how to save at this point because I can't even in the windows operating system Vista.  can someone help me please?

  We must believe the error message telling you that your hard drive is about to fail. If you are not technically proficient, take the machine to a local computer technician who will try to back up your data and then replace the hard drive. Do not use a type of BigComputerStore/GeekSquad of the place. Otherwise, you may be able to get the data saved by one of the methods below and replace the hard drive yourself.

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with sufficient capacity to store your data, OR an external hard drive formatted USB FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET

  IMPORTANT - If there is no question that the drive is at fault - there are noises, for example - and the data is crucial NOTHING else ON THE DISC. Whenever launch you this player you can destroy data. If this is the case, send the drive to a professional data recovery company. I use savers by car, but there are others. General prices run from $500USD on-site. Investors recovered all disk data on a portable player that failed for one of my clients, and it cost $2 700. He thought that it was worth the money; only you know what's worth your data. I understand that some insurance companies now cover fresh data recovery so check with yours.

  Drive savers - http://www.drivesavers.com

  For future disaster recovery programs:
  http://www.elephantboycomputers.com/page2.html#Backing_Up MS - MVP - Elephant Boy computers - don't panic!

• Question about upgrading windows and replacement of hard disk

  I originally had windows 7 premium 64 bit and later upgraded using a product key anytime upgrade to windows 7 Professional.  I still have the two product keys for the premium and professional.

  I want to replace my hard drive and upgrade to windows 10.

  What I asked:

  I have upgraded to windows 10 first and somehow make a boot disk, replace my hard drive, and then use the disk on the new hard disk?

  Can I get a disk to boot windows professional 7 some hand and use it on the new hard drive and then use the tool of a free upgrade?

  Any suggestion would be great.  Thank you

  You must first reinstall Windows 7 Home Premium, reactivate and then rerun the upgrade to Windows 7 Professional can make sure that it is turned on.

  After which, you can download and install the free update for Windows 10.

  Another option you have is to create an image of your current installation of Windows 7 Professional system and restore it on the new hard drive.

  How to pass Windows 7 to a bigger hard drive - Notebooks.com

  After the restoration of the image and adjust the layout of the partition, make sure that Windows is activated, then check Windows Update for the upgrade of Windows 10 or download manually:

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• installation and replacement of hard disk in the computer hp mini 110

  I need help replacing a hard drive on my computer hp mini 110.

  HP Mini 110

  Windows XP sp3

  I just posted a question about the installation of the operating system.  Fixed that issue but found another.  I installed the operating system and everything was fine.  I started to install the drivers and applications, and after you have installed hp applications the pc has restarted and came up with a message saying:

  PRI Master Hard Disk: S.M.A.R.T. Status BAD, Backup and replace, press F1 to resume.

  PRI Master: WDC WD1600BEVT-60ZCT1 13.01A13 ULTRA DMA MODE 5 S.M.A.R.T. Capable and BAD Status

  I press F1 and it started.  I was still a few drivers requiring an installation.  Since I've installed just everything, there was not much to save.

  I installed a different driver and rebooted and this time I hit F1 it didn't start.  I got a black page with a line of blinking cursor and nothing else happens.

  After some research, I've seen it's a bad hard drive.

  My question is:

  Is this something that can be replaced at home.  I can read the instructions.  What I need to get the same hard drive, or are there others that will work?  If I can do it at home, where can I find instructions to replace it and what is the best place to get the hard drive.  Is this what I need to know.

  Thanks for anyone's help.  I'm sure I look like an idiot, but it's something I've not done in a laptop.  I replaced and internal hard drive in a desktop computer.  I remember myself set to land and out and plug in another.  I had the chance then because the computer had 2 hard drives.

  I guess I'll need to reformat the drive and start over again with the installation of the operating system etc.

  Would I be able to upgrade and install vista or windows 7?

  Any help is appreciated.

  Hi, Tamara:

  Here is the link to the service manual for your laptop, which also lets you complete the You-Tube video.

  http://h10032.www1.HP.com/CTG/manual/c01895806.PDF

  You can buy a 2.5 "laptop hard drive size 160 GB SATA II, should not exceed 500 GB.

  You can get a 5 400 rpm model or a model of 7 200 RPM.

  The difference between the two is that you will get better performance (faster seek times) a disc of 7 200 RPM.

  However, it will be at the expense of the life of the battery between charges.

  So, what you choose, it's up to you.

  Here is a link to a site that sells hard drives of laptop.

  They have great prices and there are a lot of feedback from customers that may be useful for you to decide which one to go with.

  http://www.Newegg.com/store/subcategory.aspx?subcategory=380&name=laptop-hard-drives

  According to specifications, your computer can run Windows 7 well.

  I recommend edit you your message and remove any reference to the discussion of smuggling copies of Windows 7. These assignments are not in accordance with the rules of the forum.

  In addition, please keep in mind that a lot of these free copies of Windows can be loaded with traps that can steal your personal data and do other nasty things, including perhaps turn your PC into a Bot who committed illegal activities.  It is not worth it for me to install such illegally of is software and possibly have the bust of the FBI to the bottom of my door and arrest me for something that I didn't know that was going on with my PC.

  It seems that the recovery XP disks are available for your PC, even if the link is broken, so if you want to reinstall XP, contact HP by telephone and you can get a set for less than $20.00.

  Otherwise, you can get a game online site for $27.00 + shipping costs.

  http://www.computersurgeons.com/ProductDetails.aspx?ID=13408

  You get a legitimate copy of Windows OEM 7 (relatively) cheap at the link below.

  http://www.Newegg.com/product/product.aspx?item=N82E16832116983

  Or you can pay double that and get the commercial version, which you can transfer to another PC. With the OEM edition, you can only use it once.

  http://www.Newegg.com/product/product.aspx?item=N82E16832116716

  Paul

• Product key HP G62 Notebook - replace the HARD disk - Windows has rubbed off

  Hi there, I would really appreciate how I can recover my windows product key since it has rubbed off the bottom of my laptop and I would like to replace the hard drive and create a boot disk... Please can anyone help with what I can do to get my product key for HP.

  Windows 7 64 bit Home Pro

  Hello

  Unfortunately, there is no way to recover your Windows COA key - neither HP or Microsoft will have any record of it.

  However, if you use recovery discs for your laptop, they will not require the key to the COA and will activate automatically.

  If you wish, you can order a set of replacement recovery disks using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Recovery/rescue for Lenovo G770 - replaced the hard disk drives

  I had to replace my hard drive due to bad sectors. Where and how can I download recovery/Resue discs so that I can restore my laptop to factory settings? I replaced my hard drive due to bad sectors.

  Good day and welcome to the community.

  Recovery media has never been available via download. You will need to call Support (info below) to obtain and there may be an associated cost.

  I hope this helps.

  Kind regards.

  United States

  Brand IDEA and B, C, E, G, H, K, N, Q, V, produced the series Y

  English
  1-877-4-Lenovo, 1-877-453-6686 24 hours a day 7 days a week

  Software Premium Support - Windows & Android operating systems

  English
  1 855-271-3879 08:00-23:00 Eastern, daily

• Error Code C800044E cannot get Microsoft Updates more since the replacement of hard disk

  I am not able to update and the following error: code 800044E C

  Can someone help me? I'm using Vista Home premium.  I was able to upgrade windows until I just replace my hard drive with a new drive cloned.  I used PC-cillin antivirus for 2 years.  Thank you!

  see if this helps:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  TaurArian [MVP] 2005-2011 - Update Services

• Add/Remove Programs does not locate all my programs installed after the replacement of hard disk

  I recently had to replace the hard drive of my laptop.  We have cloned the original on the new hard drive.  The programs are all visible in Windows Explorer in the directory program files.  However, they are in the utility "Add/Remove Programs".  I can't open the program in exe files.  I am told by the manufacturer of software, in one case, I need to uninstall the program and reinstall it.  I can't uninstall it without the Add/Remove utility (or can I?)  Thanks for your comments

  Try to reinstall the program without uninstalling. Boulder computer Maven
  Most Microsoft Valuable Professional

• cd/dvd missing after the replacement of hard disk and windows drive

  I have a laptop Lenovo I had to replace a hard drive, and Windows 7.  I've been able to do and got going, or so I thought.  I went to use the cd/dvd drive and nothing.  Looking at the Panel control does not show a d: / at all.  Device Manager shows a drive. (I think)  He said same drive works fine on the Properties screen.

  Any ideas on how to get it working or back?  Or should I go to ebay and get an external hard drive?

  Thank you, in advance, for any help.

  PJ

  Hello

  To isolate your concern about the CD/DVD player, is there an error message you get? Have you tried other CD or DVD?

  We also try to make the troubleshooting steps below on how to use the hardware and peripheral troubleshooting tool:

  1. Press the logo Windows + R to open the run dialog box.
  2. Control type in the run dialog box, and then press ENTER.
  3. In the Search box in Control Panel, type troubleshooting and then click Troubleshooting.
  4. Under the material and audio item, click Configure a device. If you are prompted to enter a password or provide confirmation, type the password or provide confirmation.

  If your problem is not resolved, please see this link for additional troubleshooting steps.

  Keep us updated.

  Kind regards.

• HP G62: I have hp g62 laptop that I need to replace the hard disk but I don't have a lap desk

  I have hp g62 laptop comes with windows 7 Home premium and Microsoft last year offered 10 edition windows Home premium.
  Suddenly the windows closed was a message "hard drive does not exist" or "boot device not found", said another time.
  I need to replace in the old hdd but I don't have a lap desk. The recovery file was recorded in a single partition on the old hard drive.
  How to get started with the new hard drive and recover the old windows, I need help please thank you.
  
  Concerning

  computer laptop laptops installed new hard drive there is message "no partition active" and "no boot device" what I need to do to install windows 10.
  I have no office to boot, I used to run the wind. last summer and 7 MS offered upgrade to the wind. 10 how premium and activated, of I need help thanks
  Concerning

• replacement of hard disk for pavilion dv4-3020tx

  Hello

  My pavilion dv4-3020tx hdd just crashed and I want to replace it. My hard drive is blue WD scorpio 2.5 "SATA 640GO, I already check the hard drive im stores but its already obsolete. Can I replace it with a higher as 1 TB and other brand memory?

  Thank you!!

  Hello

  Yes, there is much more quickly around HARD drive please get one with greater cache and 7200 rpm or same hybrid HARD drive:

  http://www.PCWorld.com/article/2012223/hybrid-hard-drives-how-they-work-and-why-they-matter.html

  such as:

  http://www.Seagate.com/au/en/internal-hard-drives/laptop-hard-drives/laptop-solid-state-hybrid-drive/

  Kind regards.

• Pavilion dv6t-2000: replacing old HARD disk with the new SDS and loading the OS with 1 & 2 recovery discs fails

  I just successfully replace the SSD, exchanging an old 250 GB HDD with a new 250 GB HARD drive.

  I started with success, inserted the disc of recovery by the instructions on the screen. Disc 1 and rendered, it succeeded.  When you are prompted, load disc 2, which was also successful.  When asked, in charge of the "application and driver recovery CD" and continued.

  At this point the computer restarted several times, as he said it would be completion of installation of all elements.  Then he came with a message that says: the recovery attempt failed. Select one of the following buttons.

  "Save Log"; 'Details '; 'Retry '.

  Details says:

  ChkErrBB.CMD: Detects an error in the PININST_BBV.

  ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log

  Any suggestions here?

  I update my BIOS before proceeding with the Exchange.

  I found the solution to this problem was already answered here:

  http://h30434.www3.HP.com/T5/notebook-recovery/quot-detect-some-error-during-PININST-BBV-quot/TD-p/2593075

  Thank you!

• HP Pavilion DV6723el: Replacement of hard disk Maximum size

  Hi all

  I have a DV6735el, PN: KN782EA #ABZ and I would like to a drvie larger than the default value of 250 GB and 4 GB of RAM (ok). Makes this model of support: 1 o 2 TB?

  I guess he can use Sata III interface (without speed improvement).

  It requires disk with hight 10 mm or can I use also 15mm?

  Thank you

  Any 2.5 inches wide and 9.5 mm thick SATA hard drive laptop will work and they make the models TB 1 and 2 for those who are very good. It may be SATA III but won't work at a lower speed of SATA on your laptop. Post back if you need help most.