Aspire TV blu ray problem

Similar Questions

• Resolution of Blu - ray problems

  Hello

  
  

  I made an Ae composition using 10 SWFs that were created in flash with a resolution of 720 x 480 at 30 frames per second. I wanted to create a bluray disc, so I put the composition at 1920 x 1080 at 29.97 FPS. I then visited as an AVI, quicktime and h.264 - just bluray format to see who has produced better results and I inserted in a publication yet. After burning it, I played on a Blu - ray player bluray disc using a 32 inch screen. The photo was centered but very small-only about a third of the screen.

  
  

  Can someone please tell me what I'm doing wrong.

  
  

  Thank you

  
  

  Eric

  Can someone please tell me what I'm doing wrong.

  Well:

  I wanted to create a bluray disc, so I put the composition at 1920 x 1080 at 29.97 FPS.

  But you evolve the content? AE does not work for any automatic adjustment / scaling. Just expand the model will only increase the limits...

  Mylenium

• HP Mediasmart DVD - Blu Ray problem

  Hi I have a HP Pavilion dv6t-2300.

  Last month I had a problem when trying to play a few blurays with smart media. It was as if the Player tries to rplay disc, but after some time nothing happened, if I tried to update the software, but it shows an error during installation (something on this topic couldn't find a dll file in the folder of mediasmart dvd), I tried to uninstall it but displayed the same problem. After struggling with it, I decided to restore my laptop with the recovery discs.

  It worked, I was able to watch my blurays, but recently the same problem came back. So I did a little research and I found that the PC or device manager sees 2 readers of comics (F and H). I also found that I can see all the files on disc bluray but I can't play any of them media smart dvd.

  I also installed the Power DVD 10 to test as a trial and it cannot read the movies either, it says that the disk has a format of media unrecognize, or something like that.

  So I decided to try to update with the latest version (4.2.4701), but the error I mentioned earlier, appeared once again, I have the previous version (4.1.4328).

  As the media smart dvd worked until now I run only a few updates of windows and the HP updates (like the quick launch buttons and chipset). I wonder if these updates have something to do with the problem.

  BTW: I can watch DVD movies without problem in the DVD Smart Media, the problem occurs only with the BD discs.

  I hope you can help me...

  Thanks in advance.

  You can post a screenshot of what you see in 'computer '?

  You use a virtual drive?

  Here's what yours should look like.

  

  Drive 'E' is the second last next to drive Clone as appropriate so that DVD MS is going to see it.

• DVD or Blue Ray problem

  in Windows 7, Windows Media Center: I play a movie and hear background noise but no dialect...  I can play another movie and it will be fine. I play a 3rd movie, and it's in the background, but no speech...

  Hi Chris,

  I'd like to run this fixit-

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Let us know what happens.

• How upgrade Aspire 5750 on Blu Ray?

  I love my Aspire 5750 (I use to make this post), but I'd love to upgrade the DVD Blu Ray.  Are there specific readers recommended out of the box, or are those I should avoid due to hardware compatibility problems?  I know that I can get parts and readers about anywhere online, but I would like to know what should I look for in particular.  Any help is appreciated.

  Thank you!

  Hi liganimc

  I found a Blu Ray drive for your computer laptop here, but it is a company based in the United Kingdom (but they do an expedition around the world!). As it is designed for the 5750, there will be no compatibility issues. You'll need is a software to run Blu Ray movies.

• Blu - ray DVD don't play on my laptop when says that it comes with blue-ray program. Windows Vista Aspire 5520 G. Acer Arcade deluxe or windows media player

  When I put in the dvd it happens on arcade deluxe acer appointed as if its going to play then returns to the page of game film and said "an essential element of the player requires periodic updates. new employees may not play if the critical component is not treated quickly. you want to update now? "Yes... not" I would then click on Yes, then, it makes my screen off for a few seconds then returns to game film I try to play the movie and he asks to the page again. What should I do I don't want to buy a new program like winDVD or powerDVD

  If you just got the computer (and it sounds like that) contact the technical assistance service of the manufacturer of the computer (preferably by phone) -http://support.acer.com/ for Aspire 5520.  You may be able to get more details with the serial number of your system.  They will be happy to explain what's on your system, whether or not it can really handle discs Blu - Ray, this software to use to do (they will be able to see what they have installed on your system) and, if necessary, and even how to do because the system is almost new and certainly still under warranty.  I think you need special drivers for the drive (not to mention a disc that can play Blu - Ray discs) and the software may be special to deal with them, even if I am not sure (I don't think that Windows Media Player only is sufficient).  Arcade Delixe might do the trick (although it seems to be only an extension for WMP and unrelated to Blu - Ray), but you need to ask, because it is their software, their training and their computer.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with the drive Blue ray with windows 7

  I use an Acer Aspire 5920g with Optiarc BC-5500 ATA Device.I ve has upgraded from vista 32 bit to windows 7 32 bit and now it cannot read Blue ray disc.what can I do?

  Hi George,.

  I suggest you to use your favorite search engine to find and download any third-party application to read the blue ray discs.

   

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also try to contact Asus support for further assistance.

  http://community.Acer.com/

  Back to us for any other questions related to Windows.

• Problem with the drive of Blue Ray on TouchSmart IQ810uk, HELP!

  Can someone out there help, my new touchsmart, which is compatible with the DvD Blue Ray is unable to read or play bule ray DvD, but has no problem when it comes to CD or DvD, it plays perfectly with no hickups, I tried up to from my firmware programs and BD ROM software for playback of the blue ray DVD , but no solutions. its been suggested that I do a oil change of power, upgrade to Windows 7 as windows media supports Blue Ray DVD, I did a complete restore of the system and the only thing I can think is to exchange the BD - Rom drive, but very puzzeled since I was able to read all other formats, I don't think it's a hard drive problems.

  MAY A CLUE THERE!

  Got my BD ROM drivechange and immediately resolve my blue ray player problem, so I suggest get Hp to replace your BD - Rom drive.

• Problem reading with film in Blu - ray 3D on Satellite P750 / 02Q

  Hi all, I recently bought the laptop Toshiba 3D (P750 / 02Q). In my attempt to watch a movie on Blu - ray 3D, he failed twice. I received a message 'is not capable of reading 3D screen connected to your player. On the other title 3D Blu - ray, they say somethng in the lineage of I don't have a 3D player.

  I use the WinDVD pre-installed for Toshiba, version 10.0.5.822
  On the NVIDIA site, in the section "Download the Drivers", the current version of the driver installed in my computer after completing a sweep, is 267.44. There is a new driver available for NVIDIA GeForce GT 540 M 275.33.

  I'm not sure if this wil solve my problem. I also hesitate if I need to contact support for drivers certified for my laptop Toshiba. The P750 / 02Q is a recent model of liberation and I find very little support on the mytoshiba site.

  Hello

  I found a few Toshiba FAQ s on 3D technology:

  3D videos on your internal LCD or external 3D via HDMI port TV
  http://APS2.toshiba-tro.de/KB0/TSB0B032B0000R01.htm

  Since it is an Australian model of Toshiba, I suggest check this Toshiba driver page:
  http://www.MyToshiba.com.au/support/computers/satellite/P750/psay3a-02q001/download?OS=25

  Here you must update the driver display and Toshiba Video Player

  Take a look here also:
  Impossible to play 3D BD movies
  http://www.MyToshiba.com.au/support/item/436

• Problems whit play Blue Ray Windows 7 Home Edition 64 x

  Hello! I HAVE PROBLEMS TO PLAY BLUE RAY WHIT DVS MY LAPTOP HP PAVILION DV7-4165DX, ANY HELP? Thank you very much

  Hello

  I know is now available in version 12 around, but I could not find. Please use CyberLink PowerDVD 10:

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56904.exe

  Kind regards.

• Blu Ray player and HP MediaSmart DVD problem

  I recently bought a hp with a hp w2408h m9515y desktop computer.  This computer came equipped with a Blu Ray player and when I tried to play a movie for the first time on hp mediasmart dvd I got the message 'content is protected', "the content is not allowed to play in the current display mode.  I also tried to play blu ray on windows media player and windows media center and had no chance.  I spoke with hp and geek technical support team of the best buy also with no luck.  If anyone has any advice I would appreciate it, of course.  Thank you

  Finally, after about 3 hours with tech support at hp, we have solved the problem.  We had to reset the computer to factory settings and it worked.  Erny, thank you for your help, I appreciate it.

• Blue ray recorder hard drive problem

  I have this laptop Sony Vaio VGN-FW31M (VGN-FW31M) and I have a problem with the recorder when I go 2 my computer it s sees the recorder but when I put a cd or a dvd or blue ray disc read help pleaseeeeeeeeeeeee :-(

  Hello

  Restart so nothing is touching the process and then try to insert a disc.

  You have loaded a new DVD software lately? These type products compete for resources and
  too many can lead to problems.

  =============================================

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  device manufacturer to see if there is updated firmware or drivers for your drive if necessary.

  Also check with the system manufacturer, device manufacturer and their forums, if any, for known issues.
  
  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• X230T USB 3 port sleep problem with external Blu - Ray drive

  Hi all

  I bought a new LG external blu - ray drive and I have problems with it sleeps very quickly.  It is recognized in Windows 7 and will be available for a short period of time after I turn it on, but if I don't use it for 30 seconds, it's in a kind of fashion 'sleep'.  It works perfectly on the single WE port 2.0 on the X230T so there must be something with the 3.0 port.  The drive is powered by an AC adapter and USB 3.0 cable included one.

  I tried to disable all the properties sleeping USB in all areas of power management and power options in Windows.  Also enabled and disabled USB hub root energy saving.  Also, I went through the BIOS and threw the USB options as well and can't find why it is go to sleep so quickly.  I have the latest firmware on the drive, as well as the latest drivers Lenovo USB 3.0 for the X230T.

  I guess I'm out of luck at this point because I think I've tried all possible solutions?

  Thank you.

  Hi again,

  I have looked on the specs and do not see why this problem should occur. I would make sure that the BIOS is updated, if you have not already. The latest BIOS for your machine is 2.03 and came out a month ago. This update, you can find here. And if this does not work, can you check and publish what are the settings in your BIOS Config > USB Configuration?

  Best,

  Adam

• Problems burner Blu - Ray (HL-DT-ST BDDVDRW GGC-H20L)

  I'm REALLY frustrated!

  My Pavilion d4999t-2 came with a disk drive BluRay & lightscribe (HL-DT-ST BDDVDRW GGC-H20L) I've used for the past two years... then 2 weeks ago the laser that burns CD - R & grilled LightScribe.  Fortunately (I thought), I got the extended warranty, so I contacted Hp.

  After going through the troubleshooting steps, I convinced that the CD-R/LightScribe laser has been burned, and he sent me a replacement (#1).

  When I installed the replacement drive, everything works perfectly, except it would not write BD - R (recordable BluRay) discs.  He would not even acknowledge that a BD - R was even inserted in the drive.

  Thus, after several "Troubleshooting" with assistance from Hp, they shipped another replacement (#2).  When I installed it, it could read AS CD & CD - R discs only!  He doesn't even have any disc BluRay or DVD was even inserted in the drive.

  Troubleshooting more (during which, according to their instructions, I lost all access to the command) and they ship me another replacement (#3).  This is the same as the first.... It can read/write CD and DVD and it will read a BluRay disc, but it does not recognize BD - R disc when inserted!

  After 2 weeks and 3-disc replacement, I am not officially frustrated!

  Of course, that are given to nine drives (the 'new' date I received is in Nov 2007), it seems that one who is to repair those disks does not a very good job!

  Has anyone else had similar problems with BluRay burner or get a replacement from Hp work?

  Mystery is solved

  It turned out that hp had the incorrect part description in their catalog of replacement

  All this time, they were send me Blu - Ray, not engravers READERS!

  After spending a few hours with a technician (Arkansas fortunately - I don't have to deal with an Indian accent most read a script), she shot to the top of my original and verified system control the original drive.  After comparison with the disc I had received, she found the error and put in a change order to get the fixed catalog.  I hope that nobody else will have to go through the problems that I had.

  Now a happy camper again

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows