Aspire V5 - 573G making light and constant rattle

Similar Questions

• Installation problem Windows 10 on Acer Aspire V5 - 573G

  I have acer aspire V5 - 573G, I tried to install Windows 10 on my computer using the USB. I started on USB, format hard drive and tired to install it, but he gave me error "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. "Error code: 0x800701E3".

  After a search on the internet I found that you must upgrade to Windows 10 windows 8.1 and shouldn't have installed live. Then I installed windows 8.1 pro, then I went to upgrade to Windows 10 but after a while the update failed and rolled back to the previous version of windows and it showed the error 'the installion failed in the FIRST_BOOT expression with an error during the operation BEGIN_FIRST_BOOT'.

  Please help, how do I install windows 10.

  Finally that my problem has been resolved.

  I changed the SATA from AHCI RAID mode and that worked for me.

  But now I have new problem that is whenever I start my computer laptop blue screen of Death (BSOD) occurs. Not every time but often. Whenever he gives a new error. Some errors are...

  • Unmountable_Boot_Volume
  • Kernel_Data_Inpage

  Any suggetions?

• Acer Aspire v5 573g compatible hardware

  I've had this laptop in 2014 and he gave me hell at first, then it worked, then during the transition to the w10, he gave more hell. Fast forward to 2016, I your desktop appropriate because frankly I couldn't count on the laptop more curiously it is performed without a hitch for a while now.

  Anyway, I opened it and turned on the HDD (1 TB WD slim) for one SSD, and I thought of switching on the stick of ram to 4 GB for a 8 GB one and maybe the Ondaaah (AR5BWB222) for an Intel (Intel Dual Band Wireless-AC 7260 HMC Rev.2) one.

  My question is this, can I replace the RAM for any PC12800/1600 MHz SO-DIMM DDR3L CL11 1, 35v stick? or should it be acer approved those? (which seem to be significantly more expensive).

  Is there a list of hardware compatible with the laptop? I want to give it a new life, if possible. Anyway, thanks in advance!

  Hi calbruc,

  Aspire V5 - 573G has only a single memory and 4 GB soldered on the motherboard. Speccy shows probably these 4 GB as a free slot. You should check with CPU-Z version zipped (without installation). It will give you the right result: 8 + 4 and no free slot.

• Acer Aspire V5 - 573G mSATA-port

  Thinking about buying the new model of the Acer V5, V5 - 573 G-54218G1Takk and I would like to know if it has a free port mSATA as last year's model?

  In fact, managed to find someone on the forum who has the same model and it confirmed before my purchase. And now I can confirm myself that new models Aspire V5 - 573G with i5-i7/4210U-4510U and Nvidia GTX850M has indeed a mSATA location. My model did not have an mSATA SSD pre-installed, and the port still works.

• Aspire V5 - 573G BIOS update

  I have an Aspire V5 - 573G with the Nvidia 750GT and I was wondering if it would be wise to upgrade to the new BIOS dated dated January 20, 2015.

  Given that a newer model of V5 - 573G with 850GT (and a previous media noted set to BIOS level for hybrid N15P - GT VGA Graphics which is 850 m), thought I'd ask first before the upgrade so that I don't kill my laptop with love.

  the latest BIOS is ok for your version, they add simply taken into newer VGA support and other improvements.

• Update graphics card on Acer Aspire V5 - 573G

  Anyone with experience with upgrading the graphics hardware on the Aspire V5 - 573G? It is even possible to do?

  Thanks in advance.

  Update the graphics card in a laptop computer, you * must * have a portable 'MXM '. 'MXM' port resembles a port PCI-E inside a laptop computer.

  They were somewhat popular about 5 years ago, and models like the Acer 5739 G had MXM graphics cards.

  However, it is difficult to build a laptop that is scalable and ultra-thin. Today laptops use to be thin, and MXM is not popular.

  From what I see, no V5 - 573 G model has never included MXM. No MXM not = no setting a level, sorry!

  DanskeN, if you think that graphics performance are not what you expected, it could be that the application is using your integrated graphics Intel instead of the dedicated Nvidia chip. Set up the "Nvidia Control Panel" and click on "Manage 3D settings" and you should see a tab "program settings". Here you can play with or not your programs use your Nvidia card. It should above all be auto - personally, I only had a problem with a game, XCOM, using the built-in default graphics card!

  For those seeking other to upgrade their graphics in their laptop, try to do a search on the Internet for "[laptop brand / model] MXM ' to see if you have a portable extensible MXM.

• Print quality of gradients of gray light and shadows

  Hi all

  I am putting together a flyer only page which will have gradients of light and shadows on objects.

  Think that the shadows and Apple-ish light gray...

  I would like to get a review here of someone in the know as I am much more than print digital.

  (1) what is the lightest gray although I can work that will print well?

  When you configure the CMYK color should I simply put it in say 10% 10% 10% 10% or is there a better mix for gradients of gray. a little blue for example, or a mixture rich black.

  (2) for the creation of gradients in illustrator, should I go for the transparent grey or is it better to set up a white gradient gray?

  Finally,.

  When creating my images with shadows and slopes support, it would be better just create them in Photoshop and put them in my illustrator document and leave Illustrator to the text alone?

  Thank you in advance, I really appreciate your help

  Gray can be a subjective thing, especially when it comes to "which is too light? Personally, I try to not take any less than 10% gray. To answer your direct questions:

  (1) I would avoid making a mixture of gray, go all your lighter mix colors, they will be dyed and muddy. If you go for a deliberately cool gray I would use something like 3/0/0/10. If you want something more pure, just use shades of black.

  (2) illustrator is currently the best support of transparency. If using the white gradient does not interfere with what anyone elese about your history, I would stick with that.

  (3) you can go either way (Photoshop or Illustrator) to create your gradients. When it comes to most output devices, Photoshop gradients tend to run a little better (to know information static instead of dynamic vectors), but they restrict you during the design (as in Illustrator you can keep changing on a whim). Being a single page flyer, I would stick with Illustrator.

• Why Keynote warn the font GillSans light and "BOLD" missing?

  For several years now, I got an error of central point which is more one annoyance than other. And recently, I created a presentation that using one of the models of stock of Keynote (with Keynote 6.6.2, although I have experienced this problem with previous versions) and encountered the same error.

  My presentation was very simple, so I do not have any changes to the Slide Master. I used the showroom model.

  This model uses only the font Helvetica and which does not change during the preparation of my presentation. I've worked on Friday, saved (several times), then it opened Sunday to continue to work on that.

  When you open the presentation, I received a box of error dialog warning me that GillSans light and bold GillSans lacked. This scenario often occurs when I use Keynote, and it's the source of my boredom.

  What is causing this error appear? If a particular font GillSans, why this error pops up when opening it does not use a Keynote presentation?

  I use Suitcase Fusion to manage my fonts and keep GillSans essentially disabled, unless specifically, I want to use this font. Keynote intrinsically search and require the GillSans for any presentation, even if the presentation does not use the police?

  Thank you for your time.

  I think that all users have this problem.

  We, the users don't know how his cause and Apple don't give advice on errors in the software here.

  So the best advice is to choose her "Don't warn again" option in the warning message and do not think it's a fault with your file.

• my mac book does not light and I get three beeps while it tries to start

  my mac book does not light and I get three beeps while it tries to start

  Three beeps is almost always a problem of memory RAM.

• MacBook does not light and indicator MagSafe is weakly Green

  MacBook has become extremely hot and turned off. It does not light and indicator MagSafe is weakly green.

  You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

• Satellite M35X-S149: no boot, cs blue light and the fan comes but nothing else.

  I have a * TOSHIBA SATELLITE M35X-S149 * that does not start.
  The blue power light and fan comes on +(fan ran for 5 seconds and stop) +, nothing else.

  Yes, the RAM modules must be verified.
  I remember that one of my friends had a very similar question.
  The power led was ONE and after pressing the power button, the cooling modules was audible for several seconds. But the phone didn t initialize and nothing was visible on the screen.

  Finally, we found that one of the RAM modules was dead
  After the replacement, that everything worked perfectly!

• Toshiba USB external hard drive 250GB shows only the red light - sound of rattling

  My USB HD external drive to Toshiba aged 16 months stopped working yesterday. It shows just a flashing red light
  and makes a slight clicking noise. Of course, we cannot guarantee any more. But all my backups are on this drive,
  This means almost 10 years of work destroyed if I cannot access this disc more. Someone knows what to do to fix
  This problem?

  Post edited by: admin

  I put t know what the flashing red LED could mean, but it looks like a HARD disk head crash. Perhaps you could find some details in the user manual that the flashing light means.

  However, he still stupid s cases of dysfunction of a backup media situation. I had a similar problem with my 2.5 100 GB USB HDD. After about 3 years of work, the HARD drive died and I was not able to access the HARD disk. I was a lucky man because I have backup my data also on the DVD so I was able to restore the files and data.

  What to say maybe s possible to save data, but professional help would be necessary. Maybe you should contact technicians for assistance.

  Best regards and good luck buddy

• detail of light and shadow can be edited in Photos?

  I noticed that some editing on the iPhone 6 s tools are not available in OS X El Capitan 'Photos,' setting particularly light and shadow detail.  Is there a way to do this?

  Editing tools are all there, but you have to reveal the advanced tools.  They are hidden by default.

  To use the tool of facts highlights & shadows, open the adjustment Panel, then click on the text in blue 'Add' in the upper right corner.  Now add all the advanced settings, you want to use.

  Click the Basel to the right of the 'Light' adjustment to reveal the advanced controls for "Light".

  The downarrows are hidden, unless you hover on the far right of the amounts of the adjustments.

  The scroll bar is also hidden. You can scroll the Panel to view more signals, if they will not fit in the Panel.

  

• My printer shows the photo capture light and warning lights up but the buttons respond at all

  When I turn it on the caution light and capture photo light are turn on but the buttons respond at all.  It's a .elp of Brother DCP - 135 c.!

  Hello

  Check with the support of brother, their documentation online and drivers. OEM brother is responsible
  for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Brother - DCP-135<-- uk="">
  http://welcome.solutions.brother.com/BSC/public/EU/GB/en/model_top/colormfc/dcp135c_eu_as.html?reg=EU&c=GB&lang=en&prod=dcp135c_eu_as

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have ACER Aspire V3 - 574 G - 7198 and I would like to know what size of RAM can handle my motherboard?

  I have ACER Aspire V3 - 574 G - 7198 and I would like to know what size of RAM can handle my motherboard? I know that the my processor can handle up to 16 GB of RAM, now I have installed only 4 GB of RAM (original), but I want to update to 12 GB of RAM. I want to know if my motherboard can handle?

  I have received and read your private message. Yes, you can install 8 GB + 4 GB (current module). They will work at 1600 instead of 800 MHz (single channel). You will see the difference!

  Here are the compatible memory modules:

  • Crucial
  • PNY

  If you have the budget, I recommend buying a set of 16 GB (2x8Gb).