Assign the WLAN AP

Similar Questions

• Satellite Pro A40 can't connect to the WLan using the Win XP

  Hi all

  Newbie on your site so thank you in advance for your answers ;-)

  Picked up a Toshiba Satellite Pro A40, completely formatted and installed a legal XP Pro.

  Trying to connect to the internet using a Netgear wg511 card works on my other laptop, it will not connect even though I installed the driver for it?

  It comes up with 'limited or no connectivity problem occurred because the network has not assigned a network address of the computer.

  Any ideas please?

  Thanks Mike

  Hello

  First of all, you must update the WLan driver.
  I put t know what wireless network card has been installed, but you can find WLan card details in Device Manager-> network adapters.

  In addition, I recommend to disable all the security settings on the router and then try to connect to the wireless network.
  If you will be able to connect to the Wlan, you can enable security settings (Wlan encryption, mac address filtering, firewall, etc.) again.

  Last but not least, you can try to use this command in a DOS (CMD)
  Ipconfig / renew

  Big names

• My ZTE open C unable to connect to the wlan with 63-signs-hex key.

  Hello

  my C open from ZTE unable to connect to the wlan with WPA2-PSK and a 63 sign hex key. When I create a 2. ESSID with WPA2-PSK a sentence normal, everything's fine.

  Oliver

  Hi OliverwithZTE,

  I understand that you have connection problems to your network WPA2-PSK.

  Unfortunately, WPA2-PSK is currently not supported on Firefox OS version 1.3. Only WPA-TKIP and WPA2-AES are supported.

  -Ralph

• Can I replace the WLan on my P750 Pro Satellite card

  I bought my P750 to work on our 5 GHz Wireless (802. 11A / n) single frequency network.

  Although I learned it would work it does not work. It seems that my hardware does not work on the Strip "a".

  My question is maybe replaced card or he is buried in the Pack. If it is built of extermal wireless card can be purchased to do the job?

  Just in case you asked that I read the forums, the updated drivers and activated the "n" on the AdHoc profile advanced for my Atheros AR9002WB-1NG

  Hello

  The wireless network card is connected to the port on the motherboard miniPCI card and it of possible to remove/put the map.

  But there could still be a problems of compatibility between the new device (Wlan-chip) and the BIOS.
  I read here in the forum that someone replaced the Wlan card and finally the laptop didn't start because of compatibility issues between the Wlan and the BIOS.

  So in your case I recommend to use an external Wlan solution.
  The WLAN key is easy to use and should be compatible with most systems.

• HP50g - assign the submenu of debugging to a key in user mode

  How to assign the submenu of debugging (in Lshift/PRG/RUN) to a key?

  Thank you

  It's menu 41, so if you set < < MENU 41 > > a key, which will display the Debug menu.

  This is a very key assignment practice: < < 41 MENU DBUG > >.  It takes a program (or the name of a program) at level 1 of the battery and running the debugger on it, with the Debug menu is displayed.  I keep assigned to leftshift-wedge-PRG (i.e. keycode 42.21).

• Satellite L650 - lost the WLAN connection after upgrade to Win8

  I downloaded windows 8 on laptop Toshiba Satellite L650 of my partner and now the wireless connection does not work.
  Get Wi - Fi devices but the Toshiba is not now after the upgrade.

  I read somewhere that it may need new drivers or something like that, but I'm not tech savvy and don't know where to start.

  Can anyone help? I use another laptop for this post because there is no connection on the Toshiba.

  Thank you

  In a first time can you please post exact model laptop (L650-xxx) number?
  I want to check what WLAN card is inside.

  Open the Device Manager and check the status of the WLAN card. Please post comments on this basic information.

• Tecra A11 - 17V unable to connect to the WLan

  I have a Tecra A11 - 17V 15.6-inch and the problemis that i can´t get conection WiFi at home.
  With all of the other devices I come in my WLAN and the Tecra also in others, but not in mine.

  It is a WPA2-PSK AES and 128-bit encryption.

  This may be the cause?
  Best regards

  The wifi connetion couldn't work for different reasons.
  That is to say the Wlan standard could not be supported, or there might be a problem with the compatibility of encryption.

  You can perform a simple check.
  Disable the wireless encryption in your router settings and try to connect to the laptop to open Wlan (unsecured).

  Of course, this should be done just for testing purposes and the Wlan must be always well attached.

• New Satellite U400 cannot use the Wlan in Vista

  This is my first post! I just bought a whole new race of Toshiba Satellite U400 Vista Home Premium and I cannot get the wifi to work with my router (which works very well with a Toshiba Quosmio, philips, Nokia N85 phone and iPod laptop).

  He sometimes worked but is virtually unusable.

  I get access: Local only and whateverf as I do, I can't work properly.
  I use encryption WEP 128 bit on a router/modem US Robotics 9106.

  Any help gratefully otherwise received I will take this back to the shop because it is not a usable product.

  Thank you

  I have

  Hello

  I recommend you do the BIOS update. Here you can compare the current version on your laptop, latest on the Toshiba download page.
  Compare also the WLAN driver version.

  After BIOS update the WLAN test new functionality. In a first time without any form of encryption.
  Please post the results.

• Equium A200: Unable to connect to the Wlan - no IP address of the router

  Dear readers

  I have a laptop Equium A200 Toshiba.
  I TI a year, a little more of it and it did work under Vista perfectly, no problem.

  First of a sudded 4 weeks ago my wife told me that she can no longer connect to the internet.
  I thought that it was something less serious, until I couldn't solve the problem.

  The laptop is not receiving an IP address wireless or cable modem.
  I type cmd and I get an IP starting with 169 in wireless and wireed cases.
  I also tried to reset the NETWORK card, but it does not work.

  It's frustrating seriously because we don't change anything on the other machine, then let updates automatically, this is obviously some update that triggered connect to stop the local distribution of load and internet access now it shows only local access.

  Appreciate any help out there on root causes.
  So far not much dad worked. R/Paulcou

  Hello

  In your case, I would first check the settings of the router.
  I put t know what settings of your router is compatible, but you should go thought the simple options (such as when the first router configuration) and should check if everything is set correctly.

  In addition, you should check the settings of WLan connection. In the properties of WLan connection, you would find the TCP/IP protocol. Check the properties of the TCP/IP Protocol and set all parameters (IP address, getaway, etc.) to get automatically.

  If all of these settings are set correctly, then start the console (CMD) and use the command:
  ipconfig / renew

  This should refresh the IP address and in most cases, it helps.

  Last but not least, you should check if you can update the WLan driver!

• Satellite Pro L40 - how to enable the WLan using ConfigFree

  Can you help me?

  My English is bad I do not end.

  The question is:
  My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.

  Help please!
  I want to know what's wrong

  Thank you!!

  Hello!

  Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
  Her check first because otherwise, you can get the WLAN to work.

  In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
  Check it!

  After this Free Config should find your WLAN router if you are in the range of that.

  Good bye

• The WLAN button ' does not ' Windows Wireless config does not either

  I just reinstalled Windows XP on the PC of the client after a hard disk failure, but I can't get the laptop to work wireless. I installed the adapter of Intel 2200BG correctly & wireless windows zero configuration "works" according to control panel/admin tools/services, but the Windows wireless configuration icon isn't there & free Toshiba config utility tells me to "change the wireless adapter", but neither the switch on the left side of the laptop or the function & F8 key makes no difference.

  I got probably a thousand or more PC, but I am baffled by this. Any suggestion would be appreciated gratefully.

  Regards, Alan.

  > I correctly installed the adapter Intel 2200BG & wireless windows zero configuration "works" according to control panel/admin tools/services, but the Windows wireless configuration icon isn't there

  You are two possibilities to configure the WiFi network;
  (1) you can use the clean windows zero configuration settings
  (2) you can use the Intel ProSet utility

  When you use the Intel Proset, you must turn off the clean windows zero configuration settings.
  You can do this in the network-> connection WLan network connections

  In the WLan network connection properties, you can enable the option called display the icon in the notification area when connected.
  This would enable the WLan icon in the taskbar.

  PS: What laptop do you have?

• Unable to connect to the WLAN router satellite P300

  Hello everyone,

  I hope you can help me with my problem.

  I bought a Satellite P300. Now, I'll have some connection problems to my fritzboxfonwlan over a wlan network.

  When I connect my laptop via a cable, all right. Only with wlan i´m problems.
  My router ssid is displayed correctly. I can also type the key. But then the router is not to be found.

  I use as wpa2 encryption.
  I think that Vista has problems with it. Vista has also the most recent updates and my wireless (intel agn5100) card.
  I tried all the three drivers on the side of toshiba. I Don t know what I can do next.

  If you have any ideas, I'll be happy to hear it.

  Hello

  Have you checked if the address Mac filtering settings can affect the WLan functionality?
  If the MAC address filtering enabled your WLan card mac address has been inserted, then your laptop wouldn't connect.

  Also I recommend you check the settings of the WLan card TCP/IP.
  In the TCP/IP properties, you must set options for automatically

  PS: have you checked whether your P300 is the latest BIOS?

• Satellite A500 - unable to connect to the WLan

  I'd like someone to help me.

  Have recently bought a satellite A500.
  I'm new in the world of laptops so I'm wrong.
  I connected to a router via a modem, the two netgear, the news.

  Had the two config for my network. Works well as long as ethernet is connected to the router of computer.

  My wireless icon on the front of the laptop is orange.
  If this should be green as the router?

  Pressing FN f8 it tell me wireless is connected.
  When I remove the ethernet cable it tell me to fix the problem, I need to plug in the ethernet cable.
  But I want to go wireless, I'm sure I'm missing something.

  Rang netgear but after that my router and it is not connected to wireless technology they could help me more.
  I use windows7.

  Thanks to anyone who can help me.

  > My wireless icon on the front of the laptop is orange.
  > Should it be green as the router?

  The WLan led can only be ON or OFF. If the light comes on (any color) then it means that the Wlan switch is on!

  It seems that the WiFi is enabled. In this case, you will need to properly configure the WiFi network.
  You can use the own WLan settings in Windows or a Wlan configuration tool like Intel ProSet utility.

  First need choose the right SSID (wireless network name), right of encryption (WEP, WPA, etc.) and password encryption.
  Please note that all of these parameters should be the same on the router WLan and WLan configuration software!

  Please check if the firewall does not affect the connection to the internet as well!

  PS: make sure you use the latest version of the WLan driver
  Here you can find the drivers:
  http://APS2.toshiba-tro.de/WLAN/

  In addition, search and read comments here on the forum!

• Impossible to activate the WLAN on Satellite A100 (error message)

  HI - please excuse me if I'm missing some information here, I'm not used to dealing with computers and don't know all the technical terms!

  I use my laptop computer for 4 years and never had any internet connection problems. Use wireless this morning, and by the middle of the afternoon he had "disabled" itself. I tried to activate it (in ConfigFree) but get the message that "the question does not switch '-'Devices '.

  In detail, the three problems proposed are not the cause, none of the items are open. When I run the connectivity ConfigFree doctor, it just tells me again that my wireless connection is turned off.

  I am temporarily able to use another laptop and have tried to install the latest driver, does not. I also did a system restore to last week, but even once, he touched nothing.

  If someone could shed some light on how I can reconnect to the internet it would be much appreciated as I am only able to connect wireless to this place. If I missed any vital information, sorry! As I said, I don't really know what I'm talking about here...

  Thank you

  Hello!

  Have you checked if WLAN is actually enabled on your laptop? You can turn on or off with the switch of material that needs to be defined on and key combination FN + F8. Check this box!

  Also have a look in Device Manager if the wireless network card is installed correctly. In your case, I would also try an update of the WLAN driver.

  If you have any other questions, please let us know! :)

  Good bye

• S70 - A satellite fails to connect to the WLan

  Hi all

  Here I am having big problems with my connection Wireless on my S70 - A

  The connection continues to be cut off unexpectedly (like a reset of the network card) to find an internet connection that I have to turn off the wifi and re-connect manually...
  Of + WIFI signal LOW everything which is my distance with my box.

  The PC detects my wifi signal (it seems to be the most), I click on it to connect and then I fall directly on the 2 bars of reception! of course my wifi settings and keys are configured correctly...
  The PC is new, dating back to June 2014.

  Here's the conf:

  S70 - A SATELLITE
  WINDOWS 8.1 6.3.9600
  BIOS VERSION: 1.60
  processor Intel core 2.4 GHZ CPU I7-4700MQ

  Microsoft Virtual wifi adapter Direct
  Adapter type: IEEE 802.11 wireless
  Qualcomm-Atheros AR956x Wireless Network adapt
  Adapter type: IEEE 802.11 wireless
  Qualcomm-Atheros AR8161 PCI - E Gigabit Ethernet Controller (NDIS 6.30)
  Adapter type: Ethernet
  Software Loopback Interface 1
  Adapter type: Loopback
  DRIVER DATE: 11/2013

  If someone had an idea, should I a fair gift NIC? or something to change...

  Thank you in advance for your help, regards

  The weak WiFi signal could be related to parameters that are in energy saving Windows power management.

  It of possible to change the power to save the settings for different portable devices and generally depends on the use of the laptop. In case you use the battery mode, you can change the setting to increase the battery working time. But generally, this affects the performance of the device.

  Here's a nice technical document how to manage these settings (it of currently for Win 7 but very similar to Win 8 or 8.1 Win)
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  I recommend you to choose the most efficient setting of PCI Express wireless adapter settings
  By the way: in many cases its helpful to change the configuration of the WLan router. Try to use different channels (1-11) and different encryption (WPA / WPA2 TKIP AES)