Audio problem Satellite Pro A120 when read by amplifier

Similar Questions

• Lost audio on Satellite Pro A120-PSAC1E after downloading Windows updates

  Hello

  I lost all sound on my laptop after downloading updates for Microsoft XP from the Windows Update site. I followed the instructions on solving the problems on my laptop and uninstalled Microsoft WINMM WDM Audio compatibility Driver.

  I found afterwards kb 935448 XP update that is supposed to solve the audio problem, but this did not work. Now I want to reinstall the audio compatibility driver to see if it will work now, but I can't find anywhere to download.

  Anyone know where I can find this driver?

  Thank you

  Hello

  This issue has already been discussed here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21936

  As you say that the MS difficulty 935448 helped.

  You want to reinstall the audio driver and don t know where to find this driver?

  I visited the European Toshiba driver page and found the driver of his right.
  Simply choose your laptop download driver form. Satellite Pro-> Pro A120 PSAC1E-> Win XP

• Satellite Pro A120: DVD/CD burner does not burn audio and video files

  Hello

  I have the Satellite Pro A120 with a cd/dvd burner MAT * a uj-8415. It works very well with data Brüning, but...

  When you try to burn the MP3 files or video files on DVD or CD/r or any type of audio file, it suddenly gives me an error message telling me that the cd can no longer be used.

  I tried hole Sonic (RecordNow), through Nero 6, and also directly by dragging and dropping files, but all was in vain. This MATI * a uj-8415 machine has also made the same error while burning a DVD double layer.

  Again, the unit reads all types of CD and DVD and writes also all types of files with the exception of the audio and video.

  Can you help me please to solve this problem?

  Hello

  I know that some mp3 files and audio are protected against copying and burning on different CDs or DVDs so could not work? ¦

  Other reasons why you can't write these files to CD or DVD is simply a problem of compatibility between the STRANGE and the CD or DVD.
  According to my experience, not all CD or DVD is supported, and these compatibility issues are not really rare.

  I also have another idea.
  Have you heard of burning of problems caused by the bad registry entry? I mean the upper and lower filters...

  Please check this doc MS:
  http://support.Microsoft.com/kb/270008/en-us

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  .. .and see if it helps.

• Satellite Pro A120 cannot start when the printer is connected

  Hi I have a brand new Toshiba Satellite Pro A120 but I'm having a very strange problem.

  I installed my printer - Epson Stylus Photo R300, but now the laptop will not start if the printer is on. When I turn it on the Toshiba screen comes ok, then the Windows XP screen comes with the black background when the blue bar to cross to load Windows but its all disappear and the laptop just hangs and will not!

  However, if you turn the printer off and turn the laptop it starts up fine!

  Its really the printer which is the cause as its only when I turned it on.

  It's never caused this problem with my old PC using Windows XP too.

  Any help with a resolution would be greatly appreicated.

  Thank you

  Adam.

  How to disconnect the printer during the boot process? ;)

• Satellite Pro A120 battery problem

  Hi all

  I have a portable Satellite Pro A120 and is a battery problem a month ago.
  The battery is not new, but recently changed, 6 months ago.
  Until a few weeks ago, it lasted about 2 hours when full load, until this time
  suddenly dropped 30-40 minutes.
  In addition, sometimes the power of the laptop turns off when it's a few extra vibrations,
  for example, if I put it on a table without the maximum protection.
  In some cases, these, is not possible to turn on the laptop, unless I have remove the battery and put it back in place.

  I initially though that there was a problem with the battery or the battery contacts, but they seem ok.
  I tried to unload it in my laboratory of the company with a power resistance: resistance absorbed 1A continuously for more than 3 hours. As the specification 4400mAh battery, I would say that the battery is ok.

  Is it possible that I have a problem with the battery inside the pc management circuit?
  The battery stress test above seems to show that the charging process is ok. So the problem might be with
  the provision of monitor or battery power.
  Someone at - it experience of similar problems and maybe a solution.
  Or perhaps a work around? As excluding the battery monitoring and auto turn off

  Thanks in advance
  Concerning

  > Is it possible I have a problem with the battery inside the pc management circuit?
  Perhaps, but that's just a guess only a cellphone technician may provide an exactly the answer to this question.

  > Furthermore, sometimes the power of the laptop turns off when it's some additional vibration.
  for example, if I put it on a table without the maximum protection.
  In some cases, these, is not possible to turn on the laptop, unless I have remove the battery and put it back in place.

  It is very strange, I want to say if the contacts of the battery and the battery would be ok, this symptom shouldn't its sounds strange for me, so maybe that's the key why battery don't not lasts more than 30-40 min

  However, I think you should try a new battery before checking the motherboard.

• Satellite Pro A120 - screen flickers when you activate another monitor

  I have a Satellite Pro A120, who has a problem with the computer screen to turn off image poor qulity (looks like interference) when you use the function key and activate a second monitor, but the image on the 2nd monitor is fine. I also discovered that the second monitor doesn't have to be physically connected to the main display having the problem, as soon as you activate the second screen the problem starts. However, as soon as you disable the second monitor, the computer screen looks perfect.

  I updated the BIOS of these two and the graphics driver, but the problem still persists.
  Any ideas?

  Why don't you tell us what portable external that you use?

  Have you tried to put the good resolution of monitor 1 (s notebook LCD) after the switch to the external display? I can imagine LCD becomes bad resolution and it must be changed.

  Please play with all the display settings. I used my cell phone so many times with different external screens and I was always able to configure this works well in any mode offered.

• Satellite Pro A120 - Jerky empty reading after installing new HARD drive

  Just installed a new hard drive in my Satellite Pro A120. Made a full new install Vista, installed all the drivers but video playback is choppy/jerky. Even google earth is juddery. It didn't use to be like this with the original hard drive.

  A I had a problem of driver somewhere? I think it's the 945 chipset.

  Hey Buddy,

  To be honest, it's really hard for us, users, to say what causes this problem and I think you should test more yourself

  Anyway, you have reinstalled Windows using the Toshiba Recovery disk?
  You should also check if all Windows updates are installed and if you have yellow exclamation points in Device Manager.
  For any use of video and multimedia substance High Performance plan wrote BobRock_1.

  Sorry, but I think that it s all we can say :(

• Satellite Pro A120: I have problems with the installation of the graphics driver for W2k

  I installed windows 2000 on an A120, the system is fully packed and service updated before I even start to install the necessary drivers, I am unable to restart the system. I once, install as recommended drivers that I have problems with the graphics driver because it will not be installed because it requires a reboot and then I can't install new programs that require a restart that the driver has not been installed correctly.

  The laptop is a Pro A120, age of 1 week and came with XP home, because of this toshiba will not offer me support I changed the o/s even though they obviously support 2000 on this laptop, because they provide the drivers.

  Any ideas would be greatly appreciated.

  Hello

  Did you use and install the drivers from the Toshiba driver page right?
  The drivers of Toshiba W2k for Satellite Pro A120 have been published and are ready!

  But please pay attention to the Toshiba drivers.
  There are two different sets of Satellite Pro A120, with different drivers W2k!
  After choosing the good laptop and download the drivers please follow the proper installation order that is indicated in the document "installation instructions"! Check it!

  I think that if you follow this guide line everything works and runs correctly. Good luck

• Satellite Pro A120 and device modem on high definition audio bus drivers

  I did e clean install, but I have no sound.
  It takes the bus drivers modem device high definition audio. Anyone know where I can find them?

  Hello

  Have you tried to find on Toshiba support and download page under http://eu.computers.toshiba-europe.com?
  Satellite pro A120 is the old model of laptop and must be fully supported for WXP and Vista.

• Satellite Pro A120 has network problems

  Mr President.

  I, Jayarajan.C.N, working as an Assistant Executive Engineer in the Kerala State Electricity Board, Kerala, India.
  We had a laptop brand Thoshiba (Satellite Pro A120 type; PTA83L-08L02N model number; SL.no. Y6131B1488H) as part of a package of type brand MD - 2000 Tesient relay.

  We use this laptop for other official purposes also. It works smoothly.

  But we were faced with the following problems:
  1. we could connect the computer laptop in Local Area Networking with other desktop computers and laptop. But we could not transmit or receive data from the other computer.

  2. we could connect us the laptop to the network in ad-hoc mode wireless and the laptop showed the link as 'excellent '. But as in the case of LAN, data may not be transferred or received.

  3. we tried to use dial-up modem to the laptop. But we do not have internet access. The error showed was 'busy line (error 676) '. In fact, the line was not busy.

  4. we checked to access internet using Reliance Netconnect USB modem after installing its software. He also failed in showing the "username & passwords are wrong in this area.

  5. I added an init string in the Toshiba modem commands: AT & FX1. But before that, I made a mistake. I installed the Client Services for Netware. After that, the connection mode was changed. But I don't know how to uninstall "client services for Netware". I selected the account control user - change the way users log on or off, I received the following message: "client for Netware has disabled the display of welcome and quick user agrees." To restore these features, you must uninstall client services for Netware. As I said before, I don't know how to uninstall the same. Now during log on, I have to use ctrl + alt + delete to log on.

  After you have added the string init AT & FX1, I have only seen the modem trying to catch the net until the "veryfying username and password. But he could not catch the net. Please note that I had installed the client services for Netware. I saw that the modem has been "connecting" even after a few minutes and I noticed the system reacted very slowly.

  In short, we cannot achieve any type of networking and by error logging has been changed...
  We ask your advice detailed without delay.
  Thanks in advance.

  Regarding
  DANIELA. C.N,
  Assistant Executive Engineer,
  [email protected]

  Hello

  Please don t be angry with me, but this is a user-forum user and please don t expect magical solutions or answers.
  However, I will try to give some suggestions.

  1.) Please check if you are in the same workgroup or domain and check if you have set the right rights to folders. In addition to check all the parameters of the firewall and possibly disable it please!
  (2) see point 1)
  3.) found a Microsoft document describes this error message:
  http://support.Microsoft.com/kb/187215
  or
  http://Xtra.co.nz/help/0, 5721-2513242, 00.html

  (4) Please check the user name and password. Please note; It case sensitive s

  (5) If you want to remove the Client Service for Netware, click on START/SETTINGS/CONTROL PANEL/CONNECTIONS NETWORK. On your CONNECTION to the local AREA NETWORK right click, select properties and click on it, then highlight "CLIENT SERVICES for NETWARE" and click the "UNINSTALL" below

• Satellite Pro A120 (PSAC1E) - TV problem

  Hello
  My laptop "Satellite Pro A120 (PSAC1E)" computer does not connect to any type of TV (digital or analog). I tried many different kind of connections to SCART-VGA to VGA-HDMI. I think something is wrong with the VGA output because apparently the Intel graphic card supports the TV/monitor output as the software driver suggests. However, I can't connect the laptop to an external monitor rather easily and without hassle.
  Someone there has the same problem and if so, do you have a solution to this problem (everything!).

  Thank you

  KAV

  Hello

  As far as I know NOT ALL Satellite Pro A120 PSAC1E are equipped with the video output jack!
  I see you are using an external monitor connector!
  This port can ONLY be used with external display (screen) or a projector, but NOT with the TV!

  The TV can be connected to the s-video port that is not available!

• Satellite Pro A120-161 memory problem

  I own Toshiba Satellite Pro A120-161 (plug here: http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/productPage.do?service=UK&PRODUCT_ID=121988&toshib aShop = false #0)

  It is said that the installed memory is DDR2 (533 MHz) RAM, so why don't new CPU - Z (http://www.cpuid.com/cpuz.php) says that my installed memory has a maximum bandwidth of PC2-4300 (266 MHz)?

  Hello

  > Why new CPU - Z says my installed memory has a maximum bandwidth of 266 MHz PC2-4300
  It s a DDR2 memory module 266 MHz this way 533 Mhz don t worry, everything is ok!

  PS; I searched on the net for this memory module and it seems that it supports 533 Mhz

• Performance on a Satellite Pro A120-185 with Windows Vista problems

  Can someone help me with this.
  My laptop is a new Satellite Pro A120-185 with Windows Vista.

  I had my last configuration less portable, but you know what? He was faster!

  I'm supposed to have cetrino duo 2, 2 GHz and cach of 4 MB, FSB 667 MHz, RAM 1 GB, even though they are at 533 MHz, 100 GB 5400 RPM HARD drive / MIN.

  It is slow, not only starting, programs opening, plays something, the browser and even to copy from the CD to the hard drive sometimes give me time 4 days left!

  Clicking on something takes forever. What's wrong?
  Need less to say that with vista no and I mean none, of my devices are busy. Dongle Bluetooth, USB disk, printer, NAS, and and...

  Hey dude,

  Please don t forget that Vista has been installed on your laptop and the additional tools of Toshiba and the utilities that control many additional features!
  There is a huge difference between Vista and early Microsoft operating systems.

  The Vista eat computer resources and many devices old don t work or cannot be installed because the 3rd device manufacturers don t provide Vista drivers!

  In my opinion an upgrade to 2 GB ram would increases the performance of laptop.
  All programs and utilities could be loaded more quickly

• Installation problems after upgrade the HDD on Satellite Pro A120 (PSAC1E)

  Hello

  I've recently updated my Satellite Pro A120 with more memory and a larger hard drive. The memory I installed is 2 x 1 GB Module (DDR2-667) and the product number of the hard drive is MK2035GSS.

  My computer recognizes both of these upgradges, but since their installation I was able to install all applications (for example Norton Security etc) on my laptop - they seem to spend 1/2 to 3/4 of the way in which the installation process and then just quit smoking and become insensitive or an error message appears. I even tried to put the product recovery disc to try and erase everything and start over but even that does not load in entirely. Any ideas of what could be the cause? Also, I get messages of constant error on the screen and it blue screens and restarts frequently.

  If anyone has any ideas on what could be the cause, I would be extremely grateful for any help!

  Thank you very much

  Cblack

  Post edited by: cblack

  Hello

  just a question, than to the manufacturer that are the memory modules? And similar modules? Or do you have that you have installed other modules later.
  We can exclude the HARD drive because it doesn´t HARD drive installed. they do not cause bluescreens or similar. In very rare cases, the disk HARD COULD cause errors, but then the pladder or BSOD´s must be REALLY damaged and in your case, the HARD drive is brand new.

  It might be, that memory modules are not compatible with your machine. To avoid these incompatibility issues, you must use the modules of well-known such as kingston and toshiba brands. (I'd rather kingston, they work like a charm in my A100 Sat :))

  Would appreciate comments on your part.

  See you soon

• Re: Satellite Pro A120 is no sound

  My father made me a laptop TOSHIBA Satellite Pro A120 PSAC1E-0QJ052EN the other day off a friend.

  He used to have Windows XP, but a friend of my father installed Windows 7. When I try to play music or watch videos audio meter at the bottom right shows action but not his fate.
  I tried to download the new drivers and I googled the problem, but I can't get the audio to work.

  I'd appreciate any help I need sound for a school project.
  -Tom

  > watch action but no sound.
  When you open reading devices in sound properties option speakers are set by default?
  You can hear sound if you are using the headset or headphones?