Authorization to run a virtual machine power on and off

Similar Questions

• How can I transfer a file from the operating system to a backup of the production running VM virtual machine?

  Problem:  After I do a backup one using ghettoVCB on a local VMFS volume, I have a virtual machine that I can start something happened to that running.  However, sometimes I just need a file from the OS level, which means that I would need to start to get them, but then I have an IP address conflict.  I can't imagine a way to have the NICs turned off and still be able to move the file.  If I change the IP addresses, the software that I need to create the file that I need to transfer no longer works because, although there no need of constant connectivity to the seller, it is locked to the public IP address.

  Material:  I have two 4 ESXi hosts to work, each with local VMFS volumes.  They share a private vlan common and a vlan common public.  They each ssh, ftp, wput, wget, and rsync available.  I have a Windows 2003 Server VM which also hosts a NFS and the VI client and other VMWare tools.  It also has private and public interfaces as do virtual machines that would be to make and receive the OS files.

  Question:  How can I transfer a file from the operating system to a backup of the production running VM virtual machine?

  Thank you!

  Yes Mr President, make sure you set the network on this virtual machine to be connected to the 'Internal' vswitch, you set up before turning the power on to the virtual machine.

  -

• Run a virtual machine or vAppliance on a VMPlayer installed on a virtual machine

  Hello

  I had to install VMPlayer 2.5.2 build-156735 on a virtual machine in the Back/restore solution. I was initially not able to install theVMplayer on a virtual machine, but I got the time this as a result of article

  http://communities.VMware.com/thread/61041

  Now, after the successful installation, I'm not able to run a virtual machine on this VMPlayer, I get an error message

  "You can't power on a virtual machine with in a virtual machine.

  I tried to run a test applainc called My NMAP.

  I will attach the vmware.log file and the vmx file.

  I don't know there must be something in the vmx file to work around this problem.

  VM host is a Windows 2003 VM with sufficient resources.

  Any ideas how to get around this problem?

  Ah.

  ESX 3.0. * does not support monitor_control.restrict_backdoor.

  ESX 3.5. * does not support monitor_control.vt32.

  ESX 4.0. * takes in charge monitor_control.restrict_backdoor, but instead of monitor_control.vt32, you must use "monitor.virtual_exec = material."

  On ESX 3.*, you should still be able to execute the nested virtual machine by adding the following configuration option to the configuration file for the internal VM:

  vmx.allowNested = TRUE
  

• I need to run a virtual machine, hyper v on my windows machine 8 with workstation 10

  I know that I can run a virtual machine in hyper v in v hyper customer, my question is if I turn the functionality hyper v on this will affect my 10 workstation install?

  As far as I know, that you can no longer start the vmx86 kernel driver once the HyperV role is activated.
  In previous HyperV versions that you could use a special startup parameter to disable the HyperV role for the next boot - so that you can run Workstation - but I don't know if it still works.

  So to summarize: HyperV and workstation cannot co-exist and be used one after the other - at the very least a reboot is required

• Definition of reserves on the running JAVA Virtual machines

  I recently came across an overview of VMware performance that had a page essentially recommending reservations memory setting for the running Java virtual machines (see table). We have Java environments and did not have performance problems or complaints so, I doubt that I would implement any changes. However, I am curious to know if it's even a better practical recommendation, I could not put the date on the document so I wanted to see if someone had updated or current information for vSphere 4.X, 5.X environments.

  In General, we only use reservations memory to avoid the overhead administrative and operational increased. If we have never not a necessity, I prefer to use reservations to pool resources rather than granular level VM reservations.

  In my opinion, if you use the reservations are a regularity no exception in your environment, then you can use these rules.  That said, if you don't have no problem, I wouldn't change anything.  I've also linked a new document below.

  http://www.VMware.com/files/PDF/Techpaper/Enterprise-Java-applications-on-VMware-best-practices-guide.PDF

• Virtual machines power controls

  Hello!

  How can I change the option of control power supply for all the virtual machines in the Datacenter in one step?

  Is ther scripts for this, I'm looking for it and I can't find anything useful?

  I would like to change function of stop button turning off comments from reviews of the judgment.

  Good bye

  You can use simple a script that changes the parameter vmx 'powerType.powerOff' to 'default' to 'soft' = powerType.powerOff

  Shell (in the ESX CLI) script you can use something like this (the virtual machine must be turned off):

  for VMX in /vmfs/volumes/VMFS_NAME/*/*.vmx
  do
     cp -p $VMX $VMX.orig
     sed 's/powerType.powerOff = "default"/powerType.powerOff = "soft"/' $VMX.orig > $VMX
  done
  

  André

• Help: Cannot clone a snapshot for a virtual machine that is turned off

  Hi guys

  I am currently using VMWare Workstation 10.0.3 build-1895310

  (The latest available at the time of writing)

  I want to create a clone of a snapshot.

  The snapshot is on the two snapshots behind 'You are here' - the current state.

  The computer virtual running windows server 2012.

  The virtual machine is completely turned off.

  (the virtual machine was turned off within the BONE, and no 'Power Off' option is available in the menu 'Power' after the OS is turned off, indicating (as far as I can tell) that the virtual machine is turned off completely)

  However, when you try to create a clone of the snapshot, the dialog box indicates that the virtual machine must be fed first (which I think it is) before making a clone.

  The only option available in the dialog box is "Cancel". (ie - the cloning process cannot continue)

  The attached picture shows the dialog of Clone, indicating the issue - and behind it, the engine power VM off

  (I'm trying to clone the snapshot "Installation")

  In other words, I have a completely powered off power VM (as far as I know), but it is impossible to create a clone of a snapshot, as VMWare seems to think that it is always active, for some unknown reason...

  Am I something wrong / missing something?

  Please advise...

  Thanks in advance

  James

  Welcome to the community,

  the reason is that the virtual machine has been turned on at the time you created the snapshot. What you can do is to clone the virtual disk manually using the command line of vmware-vdiskmanager (using the snapshot required as the source hard) and then create a new virtual machine by using the virtual disk cloned rather than creating a new.

  André

• vROPs - you can create a report to show when a virtual machine has changed and what has changed?

  I can't currently developing a report/view that can show me what I'm looking for.  I thought since it's related capabilities vROPs can keep track.  Is there a way to see the when a virtual machine has changed and what has changed?  Looking mainly vdisk, vCPU or vRAM.

  Thanks for help or suggestions.

  Hi newbski1,

  There are few things you can try to help him with this.

  1. the events view shows you changes in resources, it is not terribly detailed, but it will help

  2. depending on your version, you can also view in Configuration Manager that is part of the vRO suite that will show you the changes to configurations.

  See you soon

  @iiToby

• Pre-built virtual machine with OBIEE and APEX

  Hi all
  
  I searched for a virtual machine with OBIEE and APEX pre-installed, but I can't find it... or information messages on this subject. Does anyone know if y at - it a selection of pre-designed developer programs VM with these two tools?
  I currently have the "database App Development VM' with APEX in there, but I can't understand how to install OBIEE inside.
  
  Any help will be appreciated.
  
  Please, if this is not the right category where I should ask the question, let me know and I'll move it.
  
  Thank you.
  Elena.

  PL see deployment guide in the link above - the model of computer virtual includes version of database 11.2.0.3, which should be the APEX installed by default in it. If this isn't the case, it will be much easier to install the APEX in the VM OBIEE.

  For sharing files between the host and the guest, pl see the Virtualbox documentation - http://www.virtualbox.org/manual/ch04.html#sharedfolders

  HTH
  Srini

• I'm on windows 7 64 bit, and when I try to save a site by double clicking on the icon star on the address bar, bookmark box flickers power on and off and disappears later

  I'm on windows 7 64 bit and when I try to save a site by double clicking on the icon star on the address bar, bookmark box flickers power on and off and then disappears. I did some research and found that the default theme is the cause. I installed a different theme and the problem goes away and that's why I don't know the root cause. Anyone with ideas on how to solve this problem? I like the default theme!

  Try to uncheck the box next to 'use acceleration hardware when available' in the Options. Worked for me!

• Satellite Pro C50 - A - 1 K 9 - screen flickers power on and off

  Has anyone encountered a problem where the screen flickers power on and off? Mine will Dim to the point where you can't see whats happening and then back to normal.

  I tried a restore drivers, but the problem persisted. I did also check complete anti-virus (I realize that it was probably not the cause of the problem, but decided to be complete). I was thinking that it's purely a hardware problem, like when I use an external monitor connected through a HDMI cable I don't have this problem.

  I guess it must be a problem with the connection between the screen and the motherboard. Maybe a problem within the hinge where they cross connection.

  Anyone got any other suggestions until I sent it off for repair (only he got in March and I have a 2 year warranty, but who goes back to college soon and do not want to be without him).

  I have a Toshiba Satellite Pro C50 - A - 1 k 9.

  Thanks in advance.

  I agree with you, Fraser and think it could be hardware related issue but I don't in any way you can fix it alone. Your laptop must be controlled by the Toshiba service provider.

  Contact the nearest service provider for Toshiba in your country, explain the situation and ask for help.

• When I change how a user connects power on and off a screen appears saying "client for Netware has disabled the Welcome screen and the fast user switching. To restore these features...

  Original title: how to uninstall client services for netware?

  When I change how a user connects power on and off a screen appears saying "client for Netware has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall client services for Netware... But it is impossible to find... Help?

  Hello LindsayJune,

  Click the Start button.
  Click on Control Panel. Select network connections
  Right click on 'Connect to the Local network', then click 'properties '.
  Search for "Client Service for NetWare" slot "this connection uses the following items."
  Click it, and then click the "Uninstall" button
  Restart your computer.

  Uninstall client for Netware feature will allow the option of quick change of user on your computer.

  I hope this helps.

• Using vmrun to obtain an IP address when you run the virtual machine mode headless fails customers

  Operating system: OS X Yosemite 10.10.5

  VMware Fusion: Professional Version 8.1.1 (3771013)

  When you run a VM guest in headless mode I can't use vmrun to get IP clients. If I eventually bring to the top/start the merger GUI, the command returns the IP address as planned. It is always reproducible.

  $ vmrun -T fusion start "path/to/MyVMs.vmx" nogui
  2016-06-12T10:55:46.626| ServiceImpl_Opener: PID 11515
  
  ... wait for VM to come up. If the VM has a static IP address I can now ssh into the instance.
  
  $ vmrun -T fusion getGuestIPAddress "path/to/MyVMs.vmx"
  Error: The VMware Tools are not running in the virtual machine: "path/to/MyVMs.vmx"
  
  $ vmrun -T fusion checkToolsState "path/to/MyVMs.vmx"
  installed
  
  ... Start the VMware GUI and ensure the VM's console window is open
  
  $ vmrun -T fusion getGuestIPAddress "path/to/MyVMs.vmx"
  192.168.100.23
  

  I tested with open-vm-tools and tools VMware packaged with the merger and the behavior is the same. I also spoke with others on the channel of freenode #vmware who have confirmed that the problem exists for users of workstation as well.

  Hi danandham,

  Welcome in the vmware community. Iyou s really a problem, we try to fix it.

  After a command, you can use as a workaround:

  vmrun t fusion getGuestIPAddress "path/to/MyVMs.vmx" - wait

  See you soon

• Run a virtual machine with a graphical interface on a host without GUI

  Hallo

  I want to install a simple Windows 7 for some tasks bit where I need Windows on my server Ubuntu 14.04. This server has no GUI (no X) and should have any.

  Already, I've installed the virtual Windows machine on my workstation to 12, so I would just copy the vmdk on my linux server and run it, maybe put something in the vmx file.

  But I do not know is that it's all means possible.

  Is it?

  Is there any player or any application for ubuntu VMware when there is no X system (on ubuntu), where I can run virtual machines with GUI inside?

  Maybe another virtualization tool, vmware not?

  I think that this exact question already somewhere, but I haven't found much question where comments lacking a GUI, but not the host.

  I need a guest-gui on a host without gui (where I have only the terminal).

  So maybe it's not possible at all, so please tell me a 'no', so I won't expect more

  Thank you to

  Frank

  EDIT: oh, this seems to be another question unanswered it is too difficult or too stupid?

  Hi Frank,.

  Now that would be stupid, having a text Installer, and then not allow the virtual machine to run. I think it should work, but you must pass the nogui option.

  Vmrun help:

  beginning

  (Supported only on teams

  Workstation.)

  Starts a virtual machine (.vmx file) or team (file .vmtm).

  The default graphical user interface option starts the machine in an interactive way,

  What is necessary to display a user interface of VMware.

  Nogui option suppresses the user interface,

  including start-up, to allow dialog box not interactive

  writing scripts.

  [gui | nogui]

  refer to the manual of vmrun: VIX API Documentation

  Edit: hmm... Now, I see that you have already tried the nogui option. You might be able to install the package libxinerama, but he could hang out in a lot of dependencies.

  FWIW, vSphere is pretty much what you describe a system not GUI to run GUI invited, so it shouldn't be a problem at all.

  Unfortunately, I don't have a host linux without X installed handy here, so can't test here without the implementation of a server without head myself.

  You can also try to run the client via the command vmware:

  VMware Workstation 12 Pro Documentation Center

  --

  Wil

• Running same virtual machine in the Lion and the snow leopard cause problems?

  I just loaded a new hard drive with Mac OS X Lion to run some programs that run only on Lion.  My Mac serves mainly through Snow Leopard installed on the main hard drive.  I can boot to an OS or the other.  Two questions:

  (1) can I have my a copy of VMware Fusion 4.1.1 installed on the disk of Lion and leopard snow by car?  Of course, I can only use one at a time since I can start only upward in an OS.

  (2) if I do the above and open my Windows XP VM on Lion, are all changes to the virtual machine that would make it unusable under Snow Leopard (or vice versa)?

  Bill

  Make sure that your VM is off - not suspended--before the host.
  Then it should work without problem