Auto focus does not work anymore

Similar Questions

• Auto focus does not work in the creative modes

  I use EOS 600 d for the past three years. I was and I am not able to auto focus in creative modes. I actually thought that there is no installation of the auto focus in creative modes. Only when I attended a workshop in Chennai yesterday, I got to know the automatic update facility is available in creative modes too.  I tried with three lenses and in all cases autofocus does not work in the creative modes only. In basic mode, it works well. I browsed the forum and found to RESET. How a reset should be done? Someone please explain. I can't find any updated firmware for 600 d.

  Thank you, Mr.Waddizzle. I did a reset according to your advice and now AF works in the creative modes also. Thank you.

• Why my auto focus does not work like Julieann K does in his tutorial

  I tried to use the auto focus selection, as shown in the tutorial by julianne k and it does not work.

  After reading your response, I realized that my photo file was huge, so I reduced the entire file significantly down for something like 8 x 10 and it worked fine.  My account was just too big. I tired of small files, and the update worked.  the file may not just be very big. I thought that after you suggested I go to 8-bit. Thanks David

• Since I have downloaded 8.0.1 pinch zoom does not work anymore. How to solve this?

  Since I have downloaded 8.0.1 pinch zoom does not work anymore. How to solve this?

  You can restore the zoom feature by changing the related values of downtown on the topic: config page.

  • Browser.Gesture.Pinch.in -> cmd_fullZoomReduce
  • Browser.Gesture.Pinch.in.Shift-> cmd_fullZoomReset
  • Browser.Gesture.Pinch.out-> cmd_fullZoomEnlarge
  • Browser.Gesture.Pinch.out.Shift-> cmd_fullZoomReset
  • Browser.Gesture.Pinch.Latched-> false

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed also show "BOLD" (user set).
  • Preferences can be reset to the default value using the context menu if they are set of users
  • Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean)

• Auto-rotation does not work on my WT8-B-102

  Hello

  I have restored my Tablet WT8B-102 and my auto rotation does not work. I instaled all the drivers and the nohing.

  How can I fix it?

  Hello

  You restored your device with the recovery image?
  I mean do you use your WT with factory settings?

• Automatic update does not work anymore

  My problem is that automatic update does not work anymore and when I try to next turn to the I get some really long file name is missing. I can not down load and reinstall Security Center because it will not only because it is included in Vista. I can't load it updates as the software that is designed to do this does not work. I can't copy and paste the error message due to the fact that I am not given the choice.

  Is enyone knows how to get around this problem.
  The message I get is that Windows does not find:-': {26ee0668-a00a-44d7-9371-beb064c98683}\5\::{36eef7db-88ad-4e81-ad4...     I think that there is more than that, but it does not fit in the window.

  I am running Vista sp1

  Ian Robins, what are the errors that you receive with this procedure? What step gives you access denied? You can attempt to acquire the files listed for a known working machine, but let us try the following:

  It is a simple procedure of rearmament and included are the steps to paste the result of the command prompt, so we read what it gives you:

  1. Click Start and type cmd in the box start the search.
  2. Right click on cmd in the list programs, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. At the command prompt, type the following command and press ENTER:

  net stop wuauserv

  net stop bits

  net stop cryptsvc

  Ren %systemroot%\System32\Catroot2 Catroot2.old

  net start cryptsvc

  Ren %systemroot%\SoftwareDistribution SoftwareDistribution.old

  regsvr32 c:\windows\system32\wuapi.dll

  regsvr32 c:\windows\system32\wuaueng.dll

  regsvr32 c:\windows\system32\wucltux.dll

  regsvr32 wups2.dll

  regsvr32 c:\windows\system32\wups.dll

  regsvr32 c:\windows\system32\wuwebv.dll

  net start bits

  net start wuauserv

  net start Eventlog

  1. Click the icon in the upper left of the window, click on edit, then click on select all, press the Enter key.
  2. By pressing CTRL + V on your keyboard to paste the content in your response.
  3. After a validation or record your response, close the command prompt and restart your computer, and then test Windows Update again.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work

  I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work. I put it in a subfolder under photos. The box is there on this subfolder. (My older guns would use) But this scanner and the 7120 times insist on ignoring my selection and use of the pictures folder. (when I save, they won't have a record dated in photos, but I would rather not clutter it.)

  Nobody likes Macs.

  When you open the settings of the utility Scan IJ, there are 3 tabs at the top. The first tab is settings when the analysis is started from the computer, the second tab is for setting when the analysis is started from the control panel. Make sure that you change the destination folder to 'Save to PC (self)' on the second tab!

• Auto-Sleep does not work then in the lock screen

  As the title says, I set automatic standby after 30 minutes of idle time of the computer, but it only works when I'm on the desktop, if I'm not connected (lock screen), auto sleep does not work, how can I solve this problem?

  Hello

  A power plan is a collection of hardware and system settings (such as the display, sleep, etc.) who manages the way your PC uses power. Lock screen the console after the deadline option must be added to the advanced power settings.

  Change power management and check.

  Power plans: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows/power-plans-FAQ#1TC=Windows-8

• Laptop won't start no-auto repair does not work

  When I start my computer laptop repair auto appears at the bottom of the screen. This makes the screen turns blue, nothing else happens. Any ideas?

  Hello

  What model of laptop do you have exactly?
  Have you tried to recover the laptop using recovery media or HARD drive recovery option?

  In my opinion, the recovery of the system should be as next as repair the automatic system does not work.

• Auto hide does not work

  My hide does not work.  I uncheck that it and click on apply. I then check it and click on apply, and it disappears momentarily and returns immediately.  Thank you!!

  WAIT!  This works when both auto-hide is selected, and the taskbar is locked!  Thank you!!!

• TextArea auto resizing does not work from flex 4.6

  Hello

  before flex 4.6 on air mobile for android, if the height is not specified in a s:TextArea, auto sizing textArea, since flex 4.6 does not work.

  Thank you.

  Try switching it back on the TextAreaSkin instead of the StageTextAreaSkin.   StageText allows you to get a native text input, but there are limits to the way he plays with the rest of the display list.

• Accessibility does not work anymore on my Satellite P200-1I4

  I have a Toshiba Satellite P200 1I4 with Windows Vista on it and so far, everything has been ok, but a few days back I noticed that the accessibility of Toshiba is also known as the FN key does not work even the dark bars that appears on the family Albums disappeared.
  What is the problem you can me and how to fix?

  http://img126.imageshack.us/img126/7421/16645571rx2.jpg

  Thank you!

  I think the package has added Toshiba takes care of FlashCards.

  Then uninstall PVAT in Control Panel-> programs and features and download and install the latest version from the Toshiba site.

• Satellite L750 - 20 c - bluetooth does not work anymore

  Hi all!

  I use the Toshiba Satellite L750 - 20 c (Windows 7) for a year now. Everything was great until 2 weeks ago, when Bluetooth simply stopped working. I tried the FN F8 option, bluetooth is on. Drivers are here also.
  Do you have an idea what could be the problem, and what can I do about it?

  Thank you. :)

  Please post a little more on this problem. What do you mean with it does not work?

  Have you tried to roll back OS restore two weeks using System?
  What is with the BT software? Is the BT symbol in the taskbar (BT Manager) (deactivated) red or white (active)?

• Satellite P500 - after update BIOS on the numeric keypad does not work anymore

  I just had a Satellite P500 and am running Windows 7. I downloaded all the latest drivers and updated the system BIOS to version 1.70 (from Toshiba support website). Now, my numeric keypad of the keyboard does not work.

  The NumLock light is on and when I hit the key "6" on the pavement, he turns the power light, but the behavior of the other keys does not change that it is on or off. The '-' key to enter a '6', but none of the other keys (except "enter" does nothing.

  I removed the keyboard driver and rebooted to reinstall the keyboard driver, but has no effect. The keyboard has worked for a few days after that I flashed the bios but seems to have stopped since I started using a USB mouse. I tried to uninstall the USB mouse driver, but who have nothing do either (it was a Logitech driver).

  Anyone have any ideas? Thanks in advance

  > I did not upgrade bios 1.7
  Maybe you should try upgrading the BIOS
  As another user has suggested upgrading the BIOS 1.7 helped, even if the end user has updated the BIOS twice

• Oficejet Pro L7680 duplex printing does not work anymore

  I used duplex printing on my Oficejet Pro L7680 all-in-One because it was new, but for the last month it does not work.

  When you choose to print or copy double-sided, it then prints the first side of the sheet, rather than take this piece of paper in the duplex unit, it it spits and then displays a message that it is paper.

  I tried reseting the printer by pulling on the power cord and leave unplugged for more than an hour, but he still feels the same question. Yet once, this happens if I print from my computer or if I'm trying to copy copy double-sided, so I don't think it's a problem with the PC. But just to cover the basics, this printer is network installed a windows PC running Vista Home 32 bit, Vista 64-bit Edition and Windows 7 64-bit edition.

  Well, it's strange, it worked for 3 weeks and now it just started working again without doing me something for her. Very strange...

  But I guess anything that get the problem solved is a good thing...