Automatic EA6500 for PokerStars port forwarding

Similar Questions

• Problems with static IP setting for the port forward through 2 routers

  I currently have cable internet connected to a router (Linksys E2000 w / v1.0.03 firmware). This router is connected to another router, a Linksys E3200 with firmware v1.0.02. In order to correctly forward ports through the E3200, I understand that I need to set up a static IP address on the router.

  I almost followed the steps in this video, but when I enter all the IP addresses for the static IP address settings, it allows me to access the router configuration page. I try to get the new IP address that I gave (which he tries to move automatically once I have save settings) and the connection times out. I am able to access internet otherwise, however. From here, I have to do a factory reset on the router and start from square one.

  Anyone have any ideas? I'm quite frustrated and would like to get ports forwarded so I can get my server properly set in place.

  1. If it has connected LAN - LAN you will need to disable the DHCP server on the E3200.

  2. the best option would be to use the 'bridge' on the E3200 mode (in the latest firmware) and connect the internet port to the main router.

  3. If connected LAN - LAN (or in Bridge mode) all internet related functions on the E3200, including ports are not relevant. There is no need to set up the port on the E3200 redirects. All shipping is done only on the E2000 and nowhere else.

  4. What is the address LAN IP of the E3200? What is the address LAN IP of the E2000?

• EA6400 port forwarding

  have disabled firewall and filtering all security-> firewall

  Add rules for the port forward

  But what a race test on mxtoolbox.com just said 'Filtered' do not open

  Please advice

  Hi nesxam. When you say that the router is plugged directly into the wall, this means that the connection of wall will have the modem. To clarify things, who is your ISP? What is an optical connection, cable, DSL or fiber? Moreover, what application you tried to open ports for? It works when the PC is plugged directly into the wall? Try to do this and see how it goes.

  Liezl-10104

  Linksys technical support

• Port forwarding does not work on EA6900

  Please help me to know what is the reason for this port forwarding does not work on my Linksys router:

  Model: EA6900 v1.1
  Firmware version: 1.1.42.161129

  I've set up two ports: TCP 22 and 8070 TCP to 192.168.1.10. (192.168.1.10 is up and running, I can reach the LAN ports).

  Yesterday, I had a live chat with Linksys support we tried to re - download the firmware even, but that did not help. Then factory reset and reconfigure the router did not help either.

  Unchecking "Filter anonymous Internet requests" and disable uPNP didn't help either (they have been suggested in similar topics).

  However, the IP displayed tab troubleshooting/Diagnostics reflect my external IP address (the IP displayed by http://whatismyip.com), which is weird, because I never have IP from my ISP from 100, that is displayed on the Diagnostics tab. So I guess it's a fake display or it relates to access to my router via www.linksyssamrtwifi.com ?

  Anyway I tried the two IPs from the outside, but the transfer simply doesn't work. (It works fine when I use my old router TP-Link).

  Please advise!

  Sorry guys, it seems indeed a double NAT problem. My ISP can detected MAC address change when I started using EA6900 (thinking that I couldn't not need public IP?) and since then he sends me IPs for NAT - ed. It is strange that the same day, he was working with my old router, but now it is even not working with my old router and not even working when I connect directly to my windows PC to my ISP (via PPPoE). I called their support line and they said that they will solve this problem within 72 hours. In any case, thanks for your help!

• Need help with the port forwarding for a XBox remote Streaming

  I have a router R6200v2 and need help with port forwarding.

  I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere

  http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/

  I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.

  Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?

  Hi @varxtis,

  You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.

  1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)

  2. Select the type of service (TCP, UDP or both)

  3 entry 5050 times a start external Port and external endpoints.

  4. Select the IP address of your XBOX.

  5. Select apply.

  6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.

  Kind regards

  Dexter

  The community team

• Router not configured for port forwarding

  I use a modem wireless to my ISP, they block all ports less than 1024 and I need to forward ports 80 & 440

  How can I solve this?

  If you configure your router for a LenovoEMC Personal Cloud and always see the message, "Not configured router for port forwarding" under personal cloud Configuration, one or more of the following ports are probably blocked by your internet provider (ISP): 80, 443or port selected in the range 50500-50599 .

  Port 80 is used for internet access (HTML UN-secure) in general. If this port is blocked, but the ports 443 and 50500 are open, the Personal Cloud will work correctly even if the error message appears.

  Port 443 is used for remote access on the host network storage device. If this port is blocked, but the port selected in the range 50500 is open, you will be able to use the Personal Cloud LenovoEMC and invite others to use it, but you will not be able to access your network storage device via the Internet URL. (See answer ID 30773 for more information on access remotely through Personal Cloud LenovoEMC.)

  A port in the range of 50500-50599 must be routed through the router to use the function LenovoEMC Personal Cloud. If this port is blocked by your ISP, you will not be able to access the Personal Cloud to your network storage device or invite others to join the Personal Cloud. (For more information, see answer ID 29070 .)

• Port forwarding on Time Capsule for Geniego

  Anyone know how to configure the port forwarding on time capsule?

  I need to set a port 8082 & 8083 for my Directv Geniego.

  Press the bar area and order at the same time.

  Airport utility type, press ENTER.

  Select time capsule, and then select edit (enter the code for the device).

  Select network, select "+" sign

  Firewall entry type: IPv4 Port Mapping

  Description: GenieGO

  Public UDP: If manual of the Consult of UDP user, enter the numbers of the port here (use commas to separate).

  Public TCP: If manual of the Consult of user TCP, enter the number in port here (use commas to separate).

  Private IP address: IP address of your GenieGO

  UDP private: same as the public

  Private TCP: Same as the public

  Select Save

  Update of TimeCapsule.

  Test.

• Setting up Port Forwarding on both routers E2000 for the Slingbox PRO - HD

  I bought recently a Slingbox PRO - HD and the software of the iPad in HD mode on my iPad when I'm away from home.  When I install the Slingbox using their setup program web-based, he pointed out that I don't have my network configured to optimize performance for the visualization of the internet, which is what I need for the iPad.  I think that I don't have the port forwarding for port 5001 set up properly on my system.  I can connect successfully to my Slingbox away from home on my iPad and my laptop, but the performance is indeed poor.

  I have a modem cable and two routers E2000.  The first E2000 is connected to a modem cable into my home office and the second E2000 is in my home theater.  I used Cisco Connect on separate computers to configure two routers.  Here are the details:

  Cable modem:
  Scientific Atlanta
  Model DPX2203 series
  Part number 4006351
  "Ethernet" connected to the "Internet" Router 1 connection.

  Router 1:
  Cisco Linksys
  Model E2000
  IP 192.168.1.1
  Wireless enabled.
  'Internet' connected to the modem cable.
  Connections 'Ethernet ':
  1 Seagate drive network storage
  2 desktop PC
  3 desktop PC
  4. the Router 2

  Router 2:
  Cisco Linksys
  Model E2000
  IP 192.168.2.1
  Wireless enabled
  'Internet' connected Router 1 "Ethernet 4'.
  Connections 'Ethernet ':
  1 Slingbox PRO - HD
  2 desktop PC
  3 A / V Receiver
  4 Blu - ray player

  How to configure the port forwarding for Slingbox PRO - HD on port 5001?  Also, what is the best way to configure two routers E2000 so that I can use as wireless access points?

  Thanks in advance for your suggestions.

  I would recommend using the second E2000 as an access point only. Which simplifies and facilitates also the transmission much:

  0 unplug the E2000 second the first. Connect a computer to the second E2000. Open the web interface to http://192.168.2.1/
  1. change the address LAN IP of the second E2000 to 192.168.2.1. on 192.168.1.2.
  2. turn off the DHCP server on the same page.
  3. save the settings.
  4. disconnect the computer and son, one of the LAN ports of the second E2000 for the first E2000.

  For other ports LAN to get an ethernet switch.

  Now, all you have to do is to set up the port forwarding on the first E2000.

• Help for my new E2500 router port forwarding

  My hosting web home used to work. But due to new ISP from Verizon to TWC, TWC gave me a modem-router and I bought my own router Linksys E2500. Verizon and services of TWC, that I subscribed are dynamic IP address. I use a third party to redirect web traffic to my house.

  TWC gave me a simple modem-router in one box. An entry is coaxial and outputs are 4 ethernet ports. I use one of the 4 outputs of the TWC ethernet box to connect to the internet the E2500 input ethernet port. All my sons and wireless devices are now feeding the E2500. All wireless and wireline devices works and can surf the internet through the E2500.

  I have assigned to one computer as the web server and the internal IP Address of this computer as 192.168.1.128 addess. The same goes for the installer with Verizon before.

  I loaded him comes from CD with the router E2500 and see the LAN 192.168.1.128.

  My problem starts from there, I do not know how to set the port in E2500 192.168.1.128 to web traffic

  1. using the CD E2500, I click on 'APPLICATION AND GAMES', then 'SIMPLE PORT FORWARDING'. under the NAME of the APPLICATION, I select one box for HTTP and type in 128 under "IP ADDRESS". I then click on ACTIVE, then 'save settings '. The 192.168.1 is set in this window, I can type only 128.

  It does not work. I can browse the internet, but can not access my site of all machines using domain name.

  Then I tried:

  2 to point 1 above, I continued to Setup > BASIC SETUP > DHCP RESEVERSATION. I can see the name of calculation/sever and the 192.168.1.128. Then, I click on the "select" and save the customer.

  I rebooted the computer/server, I disconnect and reconnect power E2500. I check the internal IP address of the server, and it's always the same. But I can't just browse my site. I can browse other places.

  No idea what's wrong on my fault? Help, please.

  Your modem is a router. All incoming internet requests end up on the modem/router. You must configure the port forwarding on the modem/router first before the E2500 will see nothing incoming from the internet.

  Alternatives:

  1. turn the modem/router mode 'bridge', which turns into a simple modem. You can connect directly to the internet with your E2500.

  2. place the E2500 as simple access point and keep the modem/router as your main and single router. Then any transmission is made on the modem/router.

• Port forwarding for the suddenly closed Linksys router

  I have a 54G wireless router... correctly port forwarded a request of a CPU (server)... but after no connection made by the user on the server... it suddenly close the application... so what I did is to reboot the router in order to refresh the connection...

  Are there other ways to fix this sudden closure of ports?  so that I would more restarts on my router

  I appreciate a lot of help...

  As directed by your statement the port that you have passed on the closed router without any connection to the server is unusual. Please make sure that you have configured an IP address static (outside the range of the router DHCP) on your server and put the same IP address for the specific port port forwarding tab.

  In addition, reduce the MTU size on the router to 1400. See the link below on how to make the changes in the MTU size.

  http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=c018b947b8774e54bd57fad02e3efddd_17331.XML&PID=80&...

• Try to open the port or do port forwarding for update of the game client (improve the download speed)

  I recently participated in the beta FFXIV and im not to attempt to update the client. It happened for a day now and im only at 78%. I looked on the forums on the site and he told me I should do port forwarding and ill be able to download the updated much more quickly. So my question is how do I port forwarding on a router NetGear on Windows Vista.

  Hello

  Ports must be sent to the IP of the specific computer.

  A specific port can only be transferred to a computer.

  He must be facing forward in the router and also via the firewall software.

  Instructions depends on the specific router you have (the manual force) be useful and the specific firewall software that you use (using the software may contain instructions).

  This site is the champion of port forwarding, http://portforward.com/

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• port forwarding for file sharing on the internet.

  I am trying to determine what port numbers, I need to transfer to my router (in virtual server) to be able to share my NAS files over the internet with my friends? I want to use file sharing, have implemented a DDNS on the NAS with a client account to my dynamic IP address, but cannot get the numbers correct port developed to be able to configure port forwarding. Can anyone help?

  Hello

  Open sharing Ports that are used on a local area network on the Internet is a Big safety hazard.

  There are secure applications that are built for this purpose, they use their own ports and generally are safe (as on the VPN or SSH).

  A free quick simple way is shared through secure ftp server. http://FileZilla-project.org/

  An elegant way door application like this, http://download.cnet.com/WebDrive/3000-2160_4-10017919.html

  In general, http://www.practicallynetworked.com/howto/fileshare/fileshare_intro.htm

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Port forwarding for Cisco RV042G TSE

  Hi, I have just configured a Cisco small Business routers on my network RV042G. My problem is that I would like to allow TSE through the WAN1 and I am not able to do. I place this information in the menu:-Setup / Forwarding TSE[TCP/3389~3389]->192.168.1.15 - firewall / access rules: allow TSE [3389] WAN1 192.168.1.15 ~ 192.168.1.11 192.168.1.15 ~ 192.168.1.15 still configuring it please? Thanks for your help.

  Thanks for the reply.

  There is nothing else that can be done on the router RV042G. all the configuration is in place.

  The only other way to make this work is to see if you can do the port forwarding on your modem and then forward all ports to the WAN address of the RV042G, or if the modem allows to create a DMZ, then you can connect the router to the DMZ port, but that's all.

  Please let us know.

• your external IP address for port forwarding

  OK, so I want to do a game server, but... There need Port Forwarding, so I called my InternetServiceProvider "Clear."

  Claire told me that "WE DO NOT support the external Ip addresses: then I was then told that I have to call HP because that's what my PC is under.

  I decided to go to the site and ask because they want a $ 60 million tax which is good, but... I don't have the money! This is why I need a server. In any case if you can please give me a video or tell me how do it in the response that would be LARGELY APPRECIATED!

  -Sincerely

  VladmirTodd

  Go to portforward.com and use their tutorials.

• Port forwarding for EYEMAX DVR on WIn Server 2012

  We use the router as a network controller on our local network. Now, we have replaced router with the server (win 2012 r2 essentials). We have an EYEMAX DVR client software to connect to a remote ip address in the web.

  Previously, I had the configuration of port forwarding router and EYEMAX was working. When we replaced the router with a server that I can no longer connect. I guess that there is a similar setting to perform on a server, but I can't figure out what to do. This certainly isn't a Firewall (when I turn it off EYEMAX still do not work).

  There is a statement (http://site.camtechsurveillance.com/downloads/remoteacc.pdf) how to configure a router to work, but I do not know how to apply similar changes on the server.

  TL; DR.

  How to do the same on the server like here http://site.camtechsurveillance.com/downloads/remoteacc.pdf

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer