Autorun suddenly no longer works

Similar Questions

• Apple TV 4 suddenly no longer works

  Since last week my Apple TV 4 suddenly no longer works, bought 27 December 2015.

  I already have things:

  1 charge of the remote control

  2 disconnected and reconnected the power cable, hdmi and ethernet (my wifi is unstable when I'm apple tv). After re - all of these cables, the device flashes 7 times and then shortly made a break.

  3. use a different power cable.

  4 searched on the internet on the significance of the 7 blinks, found nothing. Which for me is odd, blink-sequences usually have a meaning.

  5 purchased and attached a USB C cable to my iMac will hopefully restore via iTunes. But he does not appear in iTunes (updated).

  6a tried to put it into DFU mode by connecting the apple tv with the usb cable and pushed the home (tv) button and the button play-pauzé for 6 seconds. I was informed that the unit should Flash and then iTunes should recognize it.

  7 has tried to pair the remote control again, in case there's an accident and repeated all steps.

  8 has obtained information that the cable I use is supposed to be good.

  These steps did nothing, the only thing that happened between the last time that I used it and when I realized it has no function, is that they have replaced my for a "smart" electricity meter But I can't be sure that this caused all this 100%. The appliance was not turned on for the replacement.

  I see no option to manually search for the device connected to my iMac, and no indication that iTunes gets even a hint of a connection.

  Thanks in advance.

  It has a 12 month warranty - contact Apple or take it to an Apple store and ask for a replacement/repair.

  You talk as if you have tried all reasonable measures including the verification of the cable USB is correctly (no ony supply).

• My master password suddenly no longer works, can not access e-mail

  I tried to reset my password, as described in the help section. He said the password was reset... but what? He never asks me what I want to reset the password! So I try to log in again, and the same thing happens, suddenly is a password that works well for a long period is no longer accepted. Could someone else have reset it?

  No use sending answer to my address, [email protected], because I can't access it. Please send to [email protected].

  Any help would be greatly appreciated.

  John Varley, science fiction writer.

  Are you sure that you ask about your email password? The password has nothing to do with the receipt of your e-mail.

  Your email password is given with your email provider. You need to work with them to reset your password by e-mail. Go on their mail or e-mail web help page and look for a link to reset your password. Thunderbird has nothing to do with it.

• XP Pro network suddenly no longer works

  I have a home network with XP Pro and Vista Home.  It worked perfectly Friday and today (Tuesday) it won't let me access the XP machine.  I get the message "Windows cannot access (computer\dir)" the Details section: error code: 0 x 80070005 access denied.

  I have not changed anything on each machine.  There are several users and the PC have some user accounts and passwords to different levels of access to different folders.  I am set up as an administrator with full rights to everything on the PC.  Both machines have all their updates installed including SP3 on the XP machine.  The two systems are configured with static IP addresses.

  The XP machine has no problem accessing the Vista machine.  I was able to run a backup of the Vista PC to the files on the XP machine, but I have one authentication information in the backup program.  Unfortunately, it is not possible to define credentials for windows logon in Vista Home.  I have tried everything I can think about the past 5 hours including cutting the XP firewall and change the folder of shared access to everyone.  Help!  Anything with that anyone can come would be very appreciated.  I thought that maybe I could get XP to request a user name and password but I can't seem to find anything on that is.  Thanks in advance.

  Hello
  Maybe this can help.

  ---------------------
  

  The following looks like a long history (it's only 600 words). I know not what is knowledge of the user, and exactly what has been done already. The info go through the motions of the configuration and verify most of the common aspects of the LAN Windows OS features '.

  All aspects should be checked, declaring that she "worked before" or incessant on"I didn't something ", is not a way to deal with current sharing problems.

  ----------------------

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account on the computers they are allowed to connect to everyone is an account, that means a group of all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Java suddenly no longer works on Firefox, even though it says that it is enabled

  Just today, I noticed that Javascript and everything about Java does not work on Firefox. I looked away, uninstalled JavaFX, reinstalled Java 3 times, tried everything, but no matter what, Java will not work, and Firefox will report that the Applet works well.

  I am running the latest version of Firefox, as well as Java SE7 U17, which is the latest version of Java. Is it possible to fix this? In addition, Java also stopped working on my computer itself, but it is more noticeable on Firefox where I can't use drop-down menus or videos that require Javascript (it either makes me "Plugin/file not found" or it will not load). I still can't view YouTube videos.

  Do not take into account.

  Problem resolved itself after a day of waiting and reinstall Java while restarting the computer inbetween uninstalling and reinstalling.

• HP computer GB laptop cooling fan no longer works

  I have a HP G72 laptop that is three years old. The cooling fan suddenly no longer works

  You certainly don't want to run the laptop without the fan working properly. If you, the laptop overheats and will more that likely questions much more expensive and more permanent fix.

  The fans are completely interchangeable, but this isn't a task that most people feel comfortable doing. A shop will charge you a little, because it requires nearly all computer laptop disassembly. If you want to watch by yourself, the room is usually available for $20 or less and you can find some tutorials that will guide you through the entire process.

• Hi my network no longer works all of a sudden

  Hi my apple network 6 + stopped working all of a sudden, my wifi works

  What does your cell operator say about it when you asked them?

• VPN access no longer works after upgrade from 10 IOS!  Any input to fix?

  VPN access no longer works after update IOS 10!  With the help of an iPhone 5 or 6, our employees use their hotspot phone to connect to our VPN.  Suddenly, he broke Monday after the upgrade to IOS 10.  We have experienced many versions of IOS, and it has always worked.  Any patch available?

  Hello howlindaug,
  Thank you for using communities of Apple Support.

  If I understand your message that your employees will no longer be able to connect to your virtual private network with their iPhone 5 or 6 after the upgrade to iOS 10. Sierra Mac OS and iOS 10 delete a VPN profile PPTP connections when a user upgrades from their device. If your VPN is a PPTP connection, you'll want to use one of the options listed in the section below:

  Prepare for removal of PPTP VPN before upgrade you to iOS 10 and macOS Sierra
  

  Alternatives for PPTP VPN connections

  Try one of these other VPN protocols for authentication by user that are safer:

  • L2TP/IPSec
  • IKEv2/IPSec
  • Cisco IPSec
  • VPN SSL clients on the App Store, such as those of AirWatch, Aruba, Check Point, Cisco, F5 Networks, MobileIron, NetMotion, Open VPN, Palo Alto Networks, Pulse Secure and SonicWall

  Best regards.

• Apple tv fast slidepad forward remote no longer works

  I have always accelerated video and rewinding, on my last generation Apple tv "dragging" on the remote slidepad.  Netflix, buy movies on itunes etc.  This allowed me to skip large sections in a short period of time.  All of a sudden it no longer works.  It still allows fast forward me and rewind by "clicking" the left or right of the slidepad, but it's incredibly slow.  My slidepad still works to navigate through the menus, so there doesn't seem to be anything wrong with it.

  At this feature changed/deleted?  Please notify.

  You click and drag, it is assumed that it has been changed because it was too easy to do by mistake.

• Why Outlook AutoComplete for email address is no longer working on Firefox but does not work on IE?

  All of a sudden, Outlook (which forced me to update a few months hotmail) semi-automatic (Yes, it is enabled in the Advanced Privacy settings) running on Firefox (latest version) is no longer works. It will not complete even MY OWN email address. If I start Outlook on Internet Explorer - entered AutoComplete works as expected.

  Extremely frustrating.

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Shortcut keyboard 'Mark as unread' in the Mail no longer works and performs a completely different action instead.

  Hi guys,.

  I get a lot of spam and incongruous emails, most of which don't deserve to be read. I ususally just select all and press "cmd + shift + U" to mark all read or not read. Suddenly, I noticed that this shortcut no longer works for me and even though it is a very minor problem, it is kind of annoying and I'd love to fix it.

  Basically, when I press "cmd + shift + u" now, he is not mark as read – instead it brings up a finder window with the option "open" files (the same window that appears when you click the paper clip in a new email to browse attachments), and I have no idea why!

  In Mail the shortcut should be the same, it is said it is the same shortcut in the drop-down menu, and I have not changed anything. I don't know what the finder window that appears is for, if I actually use it to open a file and then disappears from the window but nothing of actually opens or is happening. What's weird, is that when you use the shortcut to "mark as unread" and the finder window appears, it actually becomes the selected window - mail is still selected. And, therefore, this means that if you continue to press the shortcut to "mark as unread", it will be permanently open these "File Explorer" finder windows... which I've never seen elsewhere.

  Anyone who has a solution?

  

  So much worse... After weeks of being confused, that just now, I realize what the problem was.

  I installed the Puush application to quickly download screen shots and files... and guess what it was shortened by default for the "upload file"...

  Problem solved.

• Synaptics touchpad no longer works on Qosmio G50-133

  My Qosmio G50-133 suddenly lost it of keypad touch, it no longer works, the panel of mouse control shows the synaptics without any inside information tab.
  I uninstalled, rebooted my windows 7 with no luck and I just can not find a driver for it on the toshiba site or anywhere...

  Sosmeone there a clue?

  Hey cool.
  Thanks for the comments.

• Satellite A100-491 AV-buttons no longer works

  Hello

  All of a sudden my (internet and cd/dvd) av buttons right on my keyboard no longer works and I don't know anymore I changed some options.
  Can someone help me?

  Thank you very much!!

  Hello

  Try please roll back OS to an earlier time using System Restore tool. Maybe it will help but if not check Toshiba control utility and try to reconfigure the keys.

  Please report on the results.

• Satellite M - PgUp PgDn, home and end keys no longer work

  All of a sudden these keys no longer work on the computer when I'm on the internet. They sometimes work in PDF files in Word, but otherwise, they do not work...

  Hello

  I agree with the user above. I think the keyboard needs to be replaced if certain keys n t work. The fact is that individual keys can t be bought, you can only buy the whole keyboard but it isn't so expensive.

  You can get a new keyboard to an authorized service provider. On the Toshiba page you can find a list where you can find an ASP.

• Satellite U400 - the webcam no longer works

  Hello guys here is my sudden probloema!
  A year ago I bought a laptop
  TOSHIBA - Satellite U400
  with s.o. WinVista 32-bit and webcam built-in chicony etc...
  Last year, everything worked properly, but since a few days, the webcam no longer works.
  Whenever I try to open it, a message from the cam of management software that says "Webcam driver open fail, please reboot or the computer room.

  I tried to do all this: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam...! notebook bios set to day...! useless!
  the strange thing... Although going into Device Manager... the webcam is not there...! But if the launch seems open just then check what caz... Caveat!

  Gan you help me?
  Graziee

  If the cam is not listed in the devices (imaging devices) Manager, this normally means that the hardware is defective. It is possible that there is problem with the cable of the cam. Try to bring back the screen and check if the cam will be recognized again.