Backup on an external device.

Similar Questions

• sound problem when I use external devices

  When I use a headset, earpiece or bluetooth that I distorted sound. I'm buzzing, distorted. I used external devices cannot all ofa suddenly be a problem of my phone head etc. He plays well without external devices.

  Poor quality through the headphone jack can be caused can be caused by dirty or damaged jack.

  Try to clean the headphone jack.

  For other outputs:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset the headset/BT BT device

  -Reset network settings: settings > General > reset > reset network settings. You will have to join the networks wifi and re-pair the BT device

  -Restore from backup. See:

  iOS: how to save

  -Restore factory settings/new iOS device.

  If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• backup impossible w/external HD

  Integrated backup Windows Buffalo Ext. HD warned not recognize to be backed up.  Notice of Taskbar always wants me backup w / Removable
  USB device.  Device is plugged in.

  If you run Windows 7 or Vista, open backup and Restore Center.

  Click on the link to change backup settings.

  This should start the backup configuration wizard so you can choose a new backup location.

  Its possible that your external hard drive is not formatted correctly.

  Click Start > computer

  Right click on the backup device

  Click on Format

  Make sure that the file system NTFS is selected, and then click Format.

• I get the 0x8078012D error code when I run the Windows backup on an external hard drive.

  I get the 0x8078012D error code when I run the Windows backup on an external hard drive.  I have Windows 7 Professional.  That suggests this error code is the problem and how can I solve the problem?

  For people who read this thread, I offer the following information.  I solved the problem by noticing that the problem could have been caused, when the system image is created.  So I did a backup without creating the system image and backup is complete without error.

  Then I used the backup program to create a system image.  This time error (0x8007045D) was displayed.   The error report says "the operation failed for a device error encountered with the source or the destination. If the volume of the source or the destination is on a disk, run CHKDSK /R on the source volume or destination and then try again using. »

  So I ran chkdsk/r, and this program is a bad sector on the hard drive of my computer and fixed the error.  It took about an hour to run the program.  Now, the image of the system and the backup of data file work again.

  So I think that the main cause of error (0x8078012D) is deborahgarbe of i/o error (0x8007045D).  So if you get the first error code you can search for fixes for the second error code fix the root cause.

• How can I save D drive on an external device (drive C is SSD) D is the partition

  I have a new Dell XPS 8500 Windows 7 with a SSD 250 (C and OS holding) and a disk partitioned d for photos, documents, etc.  I am able to backup C on an external device, but can I also do for D?  If this isn't the case, I have to copy everything manually?

  GM

  It depends on what you use to perform the backup.  The built in and more 3rd-3rd party apps will allow you to save an external USB drive.

  My choice would be Acronis true image home 2013.  The test of the balls, easy to use and is free to try.

• Backup to one external hard drive to another

  Hoping someone can explain to me how to copy a backup of one hard external to another.  I managed to make a complete backup of the old iMac, my sister just before he died.  The backup is located on a WD My Passport for Mac and I would like to copy the backup to another external hard drive, maintaining the original on My Passport for Mac, just to keep safe in the event of failure of one of the external drives.  This backup contains the only copy of hundreds of pictures.  Any suggestion would be appreciated.  Thank you.

  If it's a Time Machine backup, click here for more information.

  If there is a bootable clone, rerun the utility of cloning, but with the new source and destination drives.

  (144833)

• Use the TC for backup and as external hard drive

  Hello

  Can I use TC for backup and as external hard drive?

  If yes then when it is full, TC erase my personal data I have stored in TC as a hard drive or erase the oldest backups?

  1. Yes, but you shouldn't. Your working data and backups must be on separate drives in case one of them goes down.

  2. Time Machine will not erase the data it did not originally there.

  (142739)

• The use of recovery of product with external devices?

  I have a laptop Toshiba Satellite and it is that I wanted to re - format my windows XP. But I realized that my CD Player no longer works so I decided to put my external CD burner on my pc.

  When the laptop is turned on, the CD is well recognized from this source. But now, my problem is that I can't find a way to boot the CD in the external drive (USB-Boot).

  How can I do? Or someone has a better solution for me to format my laptop because the internal CD player does not work? (I already tried in BIOS for external devices as the first boot device, does not :-()

  Unfortunately the guy... I have bad news for you.
  Boot from the external USB CD/DVD drive is not possible. BIOS do not support this feature.

  If you need to boot from the CD, you will need to purchase a new, compatible internal CD/DVD drive and supported.

  Note that not all CD/DVD slim line drives are supported because different master/slave/c-salt settings.
  Usually, the user manual should provide information on the supported CD/DVD burner.
  If this isn't the case, then ask the maintainer authorized Toshiba and a compatible player.

  Best regards

• My iMac does not 'see' an external device into USB port?

  My iMac doesn't "see" my Galaxy S6 when I plug it into a USB port. The same thing happens when I plug my headset intercom of exploitation to a USB port. Nothing appears in the list of devices. I can see my external hard drive listed under devices. I tried different cables and all the USB ports. Both devices to load when it is connected, but they do not appear when I open the Finder. Any ideas on how I can get the Mac to recognize these external devices?

  OS X El Capitan 10.11.3 version

  Devices section of the Finder will be only peripheral with accessible storage. Open an application that interacts with the others.

  (141396)

• Satellite P200-1EE: DVD player HD Toshiba "video output for external device cannot".

  Need help!

  My P200-1EE won't play HD DVDs. At startup the HD DVD software with an HD DVD in the drive, the drive displays on the screen, and after a short time returns an error. The message is ' + Toshiba HD DVD Player - impossible to output the video to an external device. Please change your display device by pressing the FN + F5 keys after the end of the application ' +.

  Problem is that I do not use any display on the screen of the laptop. Only the screen of the laptop is available when I use FN + F5 suggestion. It does not cure the problem.

  Drivers are up to date as far as I can tell.

  Any help is greatly appreciated.
  Gandalf

  Hello

  I searched this forum for similar issues and I think I have a solution.
  It seems that the Realtek audio driver causes this problem.

  According to this Toshiba document a new soud driver installation will help you solve this problem of HD - DVD.

  Check it;
  HD DVD title does not play ("unable to output the video to an external device")
  http://askiris.Toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1664 788xml & sliceId = & dialogid = 24590306 & stateId = 1% 200% 24588233 20

  Good bye

• Error: "unable to release the video to external device" HD DVD playback

  Hi all this makes me crazy,

  I install only the updates mentioned on the site, but I get the following message appears when you try to play a HD DVD on the notbook or through my Tv.

  + Output of the external device video impossible. Please check the external output setting after the end of the application. +

  Thanks for any help in advance.

  Stew

  Hello

  I found a good thread posted several days.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726𜀦

  There is exactly the same problem and a link to the document from Toshiba with the solution.

  According to this doc Realtek Audio Driver for Windows Vista installation or update should correct this problem.

  Check it out and please give me feedback.

  Good bye

• Equium A200 - 1V0 DVD Player error impossible of video output to an external device

  Hello
  I use my Equium A200 1V0 laptop with Vista Home Premium, and whenever I try to watch a DVD using the preinstalled Toshiba DVD Player software, I get the following error...

  "Unable to video output to an external device. Please spend your
  display the buttons on the unit by pressing the Fn + F5 after the end of the application. »

  I do not have an external monitor, and have never had a. (By pressing the Fn + F5 buttons does not work, because...) I have not attached external devices!)
  The software used to work properly, and I have not changed the settings at all.

  I have now tried to reinstall with the latest download from Toshiba, but the problem remains.

  Any thoughts would be accepted with gratitude.

  Bufster

  Hello

  I found a boyfriend of the solution.
  How?

  I searched simply here in the forum and found this thread!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726

  Jack Black has posted a link to a useful Toshiba doc that says that this error is related to the Realteck sound driver.

  Update the audio driver and you must solve this problem!

• Unable to release the video of external device

  Hello

  I am trying to play a DVD in my DVD play using the Toshiba DVD player software. I get the following error message when I do (paraphrasing):
  Can't get out the video of external device. Use the FN + F5 to change device once you have closed the application.

  I did it but the "device" that I could choose was my laptop LCD - which makes sense because I am not connected to any device.

  I come to this site and saw the comments I could need to install the Realtek Audio driver. I did, restarted and tried again. Still have the same error message.

  Any ideas?
  Thank you!

  Hello

  Just a few questions:
  What cell phone do you have?
  What operating system you are using?
  Have you tried another player like VLC media player?

  Maybe you should try to update the display driver. The audio driver has nothing to do with the video output.

  I don t use Toshiba DVD Player, I m using VLC media player. It s faster and can play most audio and video files.

  Good bye

• Satellite A300 - Windows 7 does not recognize external devices

  Windows 7 (32-bit) an upgrade of Vista and couldn't be more peripheral to work due to driver problems. Talked to Microsoft and they found that my drivers are still there but can not find them unless I tell them where to look, and so all devices I plug I need to install drivers for both times.

  Any body have ideas how to solve this problem?

  Hi doug47,

  To be honest, I think I can t help you because I know you want to know exactly.

  External devices, you mean? Not everything you need drivers, like external hard drives, USB sticks, etc. These discs will be recognized automatically (plug & play) and they are read to use after connecting.

  If you mean printer or mobile phones you have need of additional drivers. You can get it from the manufacture.

• playing a DVD from an external device

  I just bought HP Envyx360 15.6 without CD/DVD drive, so I bought an external. I installed a LG external device and the DVD will not play. How to read the DVD to external devices?

  Thanks I'll try that, after I have the LG device to uninstall and reinstall another LG unit. Hope this works